4L60 shelf build transmission case prep and how to vacuum test. Don't forget the giveaway at 1,000 subscribers!
Жүктеу.....
Пікірлер: 33
@lawnops36623 жыл бұрын
Love your attention to detail, totally respectable! A grade builder 😀
@expressautotransmissiondav4207
3 жыл бұрын
Thank you for that I really enjoy building transmissions. Something about the mentality of how it works makes me giggle.
@lawnops3662
3 жыл бұрын
@@expressautotransmissiondav4207 just finished my first 4l60e .. I really enjoyed it, now I want to build another one, whoops, lol
@expressautotransmissiondav4207
3 жыл бұрын
Lol that's what happened to me it's always an adventure building.
@expressautotransmissiondav4207
3 жыл бұрын
So some exciting news. I will be stocking hone stones like the one in my videos in the next few days let me know if you need one.
@darrenlavigne68493 жыл бұрын
Another great informative vid. Learning lots from you. Cheers
@expressautotransmissiondav4207
3 жыл бұрын
Thanks I appreciate the feedback if you have any suggestions were always open for them.
@inerceptorsmurf8 ай бұрын
Checking the 2-4 servo that way, does it test 2an4 at the same time?
@jmc6940 Жыл бұрын
What material is your stone? Sounds like silicone carbide.
@erichartsell2 жыл бұрын
Dude! I want one of those stones!!!
@expressautotransmissiondav4207
2 жыл бұрын
Get ahold of me and I'll send one out
@randy1ization
Жыл бұрын
everybody must get stoned.,.
@ClaytheBMXer Жыл бұрын
Hi, can anyone tell me what minimum spec they use for a servo pin in case vacuum test? Average? Thank you!
@mikebrogdon68783 жыл бұрын
Thanks for another great video. Are you using the Durabond bushing that you mentioned in a previous video on the rear of the case?
@expressautotransmissiondav4207
3 жыл бұрын
I did for the rear case bushing the pump bushing the sun gear is a sonnax wide and the stator tube are wide bronze with input sun gear durabond. I know it seems like a lot of extra steps to use different brands of bushings but the overall quality of each one in its place has a very positive effect of durability and longevity.
@jerrymorgan2769
3 жыл бұрын
I can fluid test but not vaccum test
@expressautotransmissiondav4207
3 жыл бұрын
@@jerrymorgan2769 gotta get you a vac test stand
@mikebrogdon6878
3 жыл бұрын
@@expressautotransmissiondav4207 So the rear case and input sungear are Durabond- the pump bushing and planet sungear are Sonnax wide- stator tube is wide oem? Is this right?
@expressautotransmissiondav4207
3 жыл бұрын
Yep I use the clevite brand of new ones for the stator tube they are a standard bushing that transtar sells
@papergatorzfedducca79982 ай бұрын
When you coming back bro?
@coddogg812 ай бұрын
Where's the bast place to order parts
@randy1ization Жыл бұрын
scotchbrite is too aggressive, use mr clean magic eraser.. (melpamine pad)
@milomanx65313 жыл бұрын
Unfortunately, Too many people believe an auto mechanic is a lesser individual. The amount of info you have to learn and follow is gigantic. Plus, you will spend thousands on tools and get dirty and banged up in the process. A trans has hundred of parts and each and every one of them needs checked. One little mistake, and you get to do it all over again!
@expressautotransmissiondav4207
3 жыл бұрын
That's for darn sure. That's also what makes it such a fun challenge. Thanks for the comment.
@jacobstevens57733 жыл бұрын
Hate to bother David, I can’t find that stone for sale. Anyway you can send me a link to one? High school shop teacher here in NC.
@expressautotransmissiondav4207
3 жыл бұрын
I'll see what I can do for sure.
@jerrymorgan2769
3 жыл бұрын
Am a machists...try J&L industrial Supply
@expressautotransmissiondav4207
3 жыл бұрын
Exciting news starting tomorrow I will be stocking hone stones like the one seen in my videos. If you need one let me know.
@jacobstevens5773
3 жыл бұрын
@@expressautotransmissiondav4207 I would like to get one.
Пікірлер: 33
Love your attention to detail, totally respectable! A grade builder 😀
@expressautotransmissiondav4207
3 жыл бұрын
Thank you for that I really enjoy building transmissions. Something about the mentality of how it works makes me giggle.
@lawnops3662
3 жыл бұрын
@@expressautotransmissiondav4207 just finished my first 4l60e .. I really enjoyed it, now I want to build another one, whoops, lol
@expressautotransmissiondav4207
3 жыл бұрын
Lol that's what happened to me it's always an adventure building.
@expressautotransmissiondav4207
3 жыл бұрын
So some exciting news. I will be stocking hone stones like the one in my videos in the next few days let me know if you need one.
Another great informative vid. Learning lots from you. Cheers
@expressautotransmissiondav4207
3 жыл бұрын
Thanks I appreciate the feedback if you have any suggestions were always open for them.
Checking the 2-4 servo that way, does it test 2an4 at the same time?
What material is your stone? Sounds like silicone carbide.
Dude! I want one of those stones!!!
@expressautotransmissiondav4207
2 жыл бұрын
Get ahold of me and I'll send one out
@randy1ization
Жыл бұрын
everybody must get stoned.,.
Hi, can anyone tell me what minimum spec they use for a servo pin in case vacuum test? Average? Thank you!
Thanks for another great video. Are you using the Durabond bushing that you mentioned in a previous video on the rear of the case?
@expressautotransmissiondav4207
3 жыл бұрын
I did for the rear case bushing the pump bushing the sun gear is a sonnax wide and the stator tube are wide bronze with input sun gear durabond. I know it seems like a lot of extra steps to use different brands of bushings but the overall quality of each one in its place has a very positive effect of durability and longevity.
@jerrymorgan2769
3 жыл бұрын
I can fluid test but not vaccum test
@expressautotransmissiondav4207
3 жыл бұрын
@@jerrymorgan2769 gotta get you a vac test stand
@mikebrogdon6878
3 жыл бұрын
@@expressautotransmissiondav4207 So the rear case and input sungear are Durabond- the pump bushing and planet sungear are Sonnax wide- stator tube is wide oem? Is this right?
@expressautotransmissiondav4207
3 жыл бұрын
Yep I use the clevite brand of new ones for the stator tube they are a standard bushing that transtar sells
When you coming back bro?
Where's the bast place to order parts
scotchbrite is too aggressive, use mr clean magic eraser.. (melpamine pad)
Unfortunately, Too many people believe an auto mechanic is a lesser individual. The amount of info you have to learn and follow is gigantic. Plus, you will spend thousands on tools and get dirty and banged up in the process. A trans has hundred of parts and each and every one of them needs checked. One little mistake, and you get to do it all over again!
@expressautotransmissiondav4207
3 жыл бұрын
That's for darn sure. That's also what makes it such a fun challenge. Thanks for the comment.
Hate to bother David, I can’t find that stone for sale. Anyway you can send me a link to one? High school shop teacher here in NC.
@expressautotransmissiondav4207
3 жыл бұрын
I'll see what I can do for sure.
@jerrymorgan2769
3 жыл бұрын
Am a machists...try J&L industrial Supply
@expressautotransmissiondav4207
3 жыл бұрын
Exciting news starting tomorrow I will be stocking hone stones like the one seen in my videos. If you need one let me know.
@jacobstevens5773
3 жыл бұрын
@@expressautotransmissiondav4207 I would like to get one.
@expressautotransmissiondav4207
3 жыл бұрын
Reach out to me at the shop and I'll send you one