3LT Corvette leather dash problem fixed for about $20

Fix the 3LT leather dash problem for about $20.
Information provided by the speaker / presenter in this video is for general information purposes only. All information is provided in good faith however we make no representation of warranty of any kind, expressed or implied, regarding the accuracy, adequacy, validity, reliability, availability, or completeness of this information. All actions are performed at your own risk.

Пікірлер: 59

  • @jimnolden2466
    @jimnolden24669 күн бұрын

    I just used this on my 991 Turbo with a leather dash and it worked fantastic no more bubbles.

  • @espy1949
    @espy194911 ай бұрын

    Hi all, I just used the method in the video. I had inly a 4" area near the defroster grill. It dries pretty quickly and is an invisible repair in my case. A Quick aid when working near the contours of the dashboard such as I did. Take some sand or if you're lucky enough to have mortar mix around the garage and put enough in a plastic bag so it has some weight put it on top of your repair and since it's sand it'll flex with the contours mine came out absolutely mint😂mint

  • @mackskio1

    @mackskio1

    2 ай бұрын

    I used a rubber wedge to place on my repair.

  • @astrotwo
    @astrotwo Жыл бұрын

    Thank you for this video and for sharing your experience. I need to do a little repair on my 3LT dash but was worried about sticking a needle into the leather. Your recommendation cleared it all up. I now feel confident to make the repair. Thanks again..

  • @martinkeith3875

    @martinkeith3875

    10 ай бұрын

    Did you try the dash repair?

  • @Wyn61
    @Wyn614 ай бұрын

    LOVE this Guy's stuff! Just saw some of his content today!!! I've had this Tear-Mender in my Paint/HSW Dept for over 22 years! I'm in an ACE store....so patronize your Hardware stores if you can.

  • @FatOldman3832
    @FatOldman3832 Жыл бұрын

    Thanks, just found this video. This fix was something I've been thinking about doing, but just wasn't sure it would work. So again, thank you and I'm glad I found your video.

  • @braddepugh
    @braddepugh Жыл бұрын

    Great video! Thanks for sharing! I am about to do this myself and just needed a little more confidence!

  • @renevidana1799
    @renevidana1799 Жыл бұрын

    Great idea. Many C7 owners that are having this problem need to watch this!

  • @jimduhamel5530
    @jimduhamel5530 Жыл бұрын

    Thank you very much for sharing the video! I had purchased everything that I needed on Amazon! Applied the glue through the leather and it worked Amazing!!!!! 3LZ dash on my Z06 looks perfect again!!!!!! Thanks again!

  • @superstarsfastcars

    @superstarsfastcars

    Жыл бұрын

    What is the name of the glue and needle you purchased on Amazon? Can you share a link?

  • @JB-ej8zy

    @JB-ej8zy

    Жыл бұрын

    What kind of glue did you use ?

  • @terrywheeler4512
    @terrywheeler4512 Жыл бұрын

    it worked great. im really happy with the result. thank you

  • @rondail5675
    @rondail5675 Жыл бұрын

    Thanks for sharing the info. I hope I never get the problem but this would be my first solution.

  • @lee.m.506
    @lee.m.506 Жыл бұрын

    SO grateful for this video. Thank you!THIS WORKS! ...a few things that worked for me... 2017 Grand Cherokee overland. Leather dash starting to look pretty bad and buckled. Used the stuff recommended. Initially wasn't really holding, so BE GENEROUS with the glue . It's not super glue, after all. Push it down hard for the full 3 minutes - I went to 4 and it's working well. Be prepared to do multiple spots. Spreading it too thin just won't work...

  • @Ninja-Alinja

    @Ninja-Alinja

    10 ай бұрын

    I am about to try the same on our jeep, same year and make. It's a bloody disgrace what this car looks like after 6 years in mild climate... may I ask if it's still ok after 2 months?

  • @aidenross5408

    @aidenross5408

    9 ай бұрын

    I have the same well 2018 GC overland and I'm going to attempt this

  • @lee.m.506

    @lee.m.506

    9 ай бұрын

    @@aidenross5408 I worked very hard to make my dash look pretty darn good - HOWEVER - 3 months later it has returned to original condition. I live in the desert southwest, so possibly the intense sunlight was the factor. The glue just didn't hold. I used exactly the glue he had recommended. Maybe a different glue or epoxy? Good luck...

  • @blackonepac

    @blackonepac

    4 ай бұрын

    Put a sun block dash cover on when you park vehicle

  • @duathlete827

    @duathlete827

    3 ай бұрын

    @@lee.m.506 Same thing on my 2013 GC. Used Fiebing's Leathercraft cement. Worked about a year but is now coming up again. I live in south Texas so the Jeeps interior gets very hot even with the windshield having a reflector in the summer. Wish someone could come up with a long lasting solution.

  • @silentstormstudios
    @silentstormstudios6 ай бұрын

    Thanks for this. I have a couple of bubbles in my Jaguar F-Type dash that I'd like to correct, and this looks like a pretty good approach. I was wondering if I would need to add glue.

  • @goodbyecalifornia3567
    @goodbyecalifornia3567 Жыл бұрын

    Thanks for your videos, I will try this fix on my c8. Subbed, keep up the great content.

  • @yungtooli

    @yungtooli

    7 ай бұрын

    your c8 dash is already bubbling??

  • @silentstormstudios

    @silentstormstudios

    6 ай бұрын

    Seems like if you're having this issue with a C8, it would still be covered under warranty, no?

  • @goodbyecalifornia3567

    @goodbyecalifornia3567

    6 ай бұрын

    @@silentstormstudios yes it would be, I actually have a 10 year extended warranty, but I’m on the big island Hawaii and our only Chevy dealership doesn’t work on the C8’s. I would have to ship my car to Honolulu for any warranty work. I’m praying I don’t ever have any big issues that I can’t handle myself.

  • @bndbass
    @bndbass Жыл бұрын

    Coming up on a year since you posted the video. Can you update us on how it is holding up? I need to do my C7 LT3 dash and Passengers side door panel.

  • @skipferguson3421
    @skipferguson34216 ай бұрын

    Great video! I have a C7 here in Texas and so far I haven't experienced this issue-yet! I see that you did this fix over a year ago and am wondering how well the fix has held up after another hot summer?

  • @duathlete827
    @duathlete8273 ай бұрын

    Is that adhesive heat resistant? I have a Grand Cherokee with a leather dash and I used this type of repair method but the leather started coming back up after a year or so due to the high heat in Texas and the cars interior temp in the summer. I used a different contact cement.

  • @Clipster15
    @Clipster15 Жыл бұрын

    What about a two part resin? I think I may be able to access the pocket from the back edge of the leather with a tube and syringe. The needle idea may be better. Viscosity may be too high with resin however.

  • @UNBOXDREVIEWS
    @UNBOXDREVIEWS10 ай бұрын

    I used a 23 gauge needle and I found a test spot and it left a visible puncture mark. I opted to pull the leather up some to get better leverage underneath. it had came up about 4 inches or so, I was able to shimmy the needle in between the dash from where it was coming up to spread the glue on the bubbled areas. I used a workout sand bag to weigh it down, someone recommended in the comments sand in a bag and that was a great suggestion! But I worked in sections to slowly lay it down and I couldn’t be happier. Ceramic tints going on asap!! I have a bmw 740i btw so much larger dash

  • @hamidherbert8690

    @hamidherbert8690

    Ай бұрын

    Make sure your tint shop doesn’t get your dash wet. The shop I went to got my dash wet and made the leather peel off more.

  • @kpsspa
    @kpsspa Жыл бұрын

    What do you do closer to the windshield where the vent and headlight sensor is?

  • @dannysampson398
    @dannysampson398 Жыл бұрын

    Should you inject the glue when the dash is hot, the cooler it is the more it bubbles, I have one Big bubble, about the size of a dinner plate, looks worse when it's cool, let it sit in the sun it's stretches out and looks alot better, Thanks !!

  • @NanoDiaz777
    @NanoDiaz777 Жыл бұрын

    Hello, excellent video, could you please put the link of where you bought the product, to be sure to buy the one that already worked. Thank you.

  • @josephspires1615
    @josephspires1615 Жыл бұрын

    Nice car!

  • @onejazkat
    @onejazkat10 ай бұрын

    Does anybody have a video on removing all of the dash, mine is not repairable

  • @stephenbarnett4587
    @stephenbarnett4587Ай бұрын

    Glue didnt work. Put a bag of rice on it to hold it down over night then the next day didnt stick and instead found little hard glue clumps under the dash. Cant tell if its crap glue from Amazon or just crap glue in general.

  • @geemindurs2589
    @geemindurs2589 Жыл бұрын

    Thanks, I needed this!! What glue did you use?

  • @silentstormstudios

    @silentstormstudios

    6 ай бұрын

    He says what glue he's using at the beginning of the video.

  • @kimberlywallace8869
    @kimberlywallace88693 ай бұрын

    It’s been a year, how is the dash doing today? Second, really wish you had shown us how you did it. But thanks for the trick going to try it

  • @leondon7421
    @leondon7421 Жыл бұрын

    just odered the glue and needle ! , ill make sure to get back at you in a week or two when i get to my grand cherokee dash.

  • @martinkeith3875

    @martinkeith3875

    11 ай бұрын

    Any luck?

  • @leondon7421

    @leondon7421

    10 ай бұрын

    @@martinkeith3875 Sorry for the late response, it worked quite wonderful, its actually pretty hard to stab the leather so be very careful as i left a few puncture holes for being careless, but it works amazingly

  • @kenstrain4366
    @kenstrain4366 Жыл бұрын

    You mentioned not adding too much glue but my entire piece is loose, still connected top and bottom but I can feel I can push it down. I am thinking I need to add quite a bit of glue and then work pretty steady at spreading it out. Any thoughts? My dash looks perfect now.

  • @squirrelcagegarage

    @squirrelcagegarage

    Жыл бұрын

    I agree, you can always add a little bit more glue but you can't take it away

  • @martinkeith3875

    @martinkeith3875

    11 ай бұрын

    When pushing the injected blister out, if the glue was to exit, does it clean up with out issue?

  • @despinapatronas5962
    @despinapatronas5962 Жыл бұрын

    Mine is also bubbling

  • @casmithc2
    @casmithc2 Жыл бұрын

    Mine is peeling around the defrost vent. Any suggestions??

  • @sgrnspc1098

    @sgrnspc1098

    Жыл бұрын

    Same.. I'm not sure if this is possible when it's peeling there?

  • @ozzielomeli4690
    @ozzielomeli4690 Жыл бұрын

    My leather is ungluing majorly so I was hoping you would have a recommendation but yours was just bubbling. I guess i'm going to have to remove mine. Dang it

  • @onejazkat

    @onejazkat

    10 ай бұрын

    Did you ever remove your dash I need to do mine

  • @ozzielomeli4690

    @ozzielomeli4690

    10 ай бұрын

    @@onejazkat not really. I cut off some of the leather and covered it with a dash cover

  • @ozzielomeli4690

    @ozzielomeli4690

    10 ай бұрын

    @@onejazkat I cut off as much as the leather that i could and then placed a nice cover on top

  • @onejazkat

    @onejazkat

    10 ай бұрын

    Where did you get the dash cover. You got a link

  • @JacePerry
    @JacePerry4 ай бұрын

    Bevel or blunt tip needle?

  • @squirrelcagegarage

    @squirrelcagegarage

    4 ай бұрын

    Bevel

  • @stingk5295
    @stingk5295 Жыл бұрын

    I did not Learn anything !

  • @Pokemonnostalgia1991
    @Pokemonnostalgia1991 Жыл бұрын

    Hey thank you bro I just message you thru messenger