That is not an AI designed part. It is a human designed part, optimized by a computer program written by an engineer.

@lewiswaite3007

3 күн бұрын

The real question is who the fuck designed this machine, that’s insane

Hyperganics going open-source is actually an insane development (in a good sense). Usually these sorts of platforms fizzle out because no one uses them, because they are too expensive and the company goes under, taking the program with them. Open-source means that even if the company goes under, the program remains and it shows that they are really committed to making your life easier.

@cumibakar10

2 жыл бұрын

I wonder what’s in it for them if they open source it.

@Chris-wq3rw

2 жыл бұрын

@@cumibakar10 im also wondering the same thing

@NishanthSalahudeen

2 жыл бұрын

@@cumibakar10 may be services like for redhat linux

@akinyemitony9385

2 жыл бұрын

Data?

@DSiren

2 жыл бұрын

@@cumibakar10 idk but they should've done it where the engineer pays a certain amount to the devs when making a patent of something made using their algorithms - that way you can do all the R&D you want without cost for using the program until you decide you have something worth putting into production, at which point the programmers get their slice.

I love how the part almost looks organic. It now suddenly makes sense why so many sci-fi movies have alien ships that look more like an insect hive than a machine.

@Mike-jv8bv

Жыл бұрын

you can thank HR giger in part for that heavy influence in biomechanical feel. Nature is pretty crazy and in alot of ways sci fi influences us when it comes to designing things.

@toututu2993

Жыл бұрын

Movies are made 100% realism for entertainment and peep just being too serious about them

@RoflcopterLamo

Жыл бұрын

@@Mike-jv8bv It’s not exactly because of that but because of efficiency and purpose built support causing that bio- feel as every segment has been stress tested and confined to get the most use out of each piece of material

@Mike-jv8bv

Жыл бұрын

@@RoflcopterLamo the more complex certain things get the more of an organic shape they start to take on. Which is interesting. you should take a look at neural networks. the connections look very organic.

@TheTomdog23

Жыл бұрын

Good pattern recognition brain. That's all I'll say

I am really excited to see what kind of engine blocks you could design this way. Lighter, with more optimized passages for oil and coolant and tighter tolerances for more efficiency.

@etishbite456

Жыл бұрын

Coolant = poor efficiency we need heat recovery

The way you mangled the metric system was pure poetry.

@GaryMcKinnonUFO

Жыл бұрын

One thousandth and a tenth :)

@Wobblybob2004

Жыл бұрын

@@GaryMcKinnonUFO "So when you do the math, you end up with about 39000g in volume worth of titanium powder., and when you translate that into Kilograms you get about 39Kg of powder"....

@rochamocha5705

Жыл бұрын

15000 cm^3 = 15 liters lmao not that big of a deal

@GaryMcKinnonUFO

Жыл бұрын

@@Wobblybob2004 Can't argue with that :)

@dg8620

Жыл бұрын

@@GaryMcKinnonUFO yeah that distracted me too lol

The future's going to be very interesting with AI design, 3D printing and modern materials making it possible to manufacture perfectly optimized parts.

@morbus5726

2 жыл бұрын

that tech's been around for a while, but in the last couple years, it's just become a lot more accessible to the common person.

@EddyKorgo

2 жыл бұрын

So practically humans will become or already are becoming useless. Or even a threath to further evolution of technologies. Once we start don't like where the progress is going we will try to stop it or limit it while AI will disagree with our primitive decisions.

@l0l0mgwtgdq

2 жыл бұрын

A movie was based on what could happen if we dabble too far into AI, it was the Terminator series 😝

@Whargoul100

2 жыл бұрын

Until it becomes self aware and tries to kill everyone lol

@uglyewok6715

2 жыл бұрын

@@EddyKorgo SkyNet

Interesting that there is a visible crack on the part. Without the cutaway, you'd never know it was there. At 5:52 where it overlays the words "NO SUPPORT" on the screen, you can see the crack directly above the 'O' in SUPPORT.

@MasterMayhem78

Жыл бұрын

There’s other defects that they tried to hide with editing also.

@MacKeyser

Жыл бұрын

Yep… that part if completed without the cutaway would have shredded under pressure and likely blown up the engine in the process. I also noted that the part required substantial finishing as there were jagged edges along various openings that would have likely broken off and potentially damaged the injectors later or the engine… 3D printing is amazing… glossing over errors only undermines confidence

@BigClur

Жыл бұрын

saw that also.. in between the chambers a lot of excess material.. really cool concept though in time these things will just get better and better.

@jyothisjenu6477

Жыл бұрын

@@MacKeyser Is there a possibility that the crack appeared because they printed a section view of the part? I wonder if the 'AI' is able to not just design the part, but also do the relevant stress analyses.

@CorwinTheOneAndOnly

Жыл бұрын

I mean it's clearly just a display piece. Im sure the procedure would have been slightly more operator support centric if they were actually making the part for a project. The point of this was to show off the AI's ability to design parts, not whether or not the printer could handle it all on its own.

Thank you guys for making these videos. I am a Tool Designer at a Rocket Company, and the education I am getting here will only make me a better designer. This will make me think twice about the features I am asking you to machine (operations & programmers). Thank You x1000000000000

The open source aspect has me excited. Typically in the past, AI part design software was bordering on half the cost of the machine you'd be printing on, and the tech to run it.

Feels like I'm watching something out of Star Trek. Tea, Earl Grey, Hot.

@thebush6077

2 жыл бұрын

Early

@richardthackeray6179

2 жыл бұрын

Came here to say this. In Star Trek Picard, they even used 3D printers as props for replicators. I’m excited to see where this technology goes

@FlameMage2

2 жыл бұрын

Feel like replicators are the main reason that Earth got to do away with currencies and enter a utopian society. Big tech tree upgrade to say the least lol.

@rayray1577

2 жыл бұрын

Well then I must be Vulcan, because this was an assault in my ears.

@MooseKnuckleWarrior

2 жыл бұрын

Star Trek aside, my favorite part was seeing the printed model in action. It was truly astounding and drew my attention towards watching this as 3d printing titanium, or anything for that matter, wasn't fully within my scope of interest, as I've never immersed myself in the technological aspect of this art, but seeing this in action brought my mind to a whole new plateau of wonderment on the concept of possible diy applications in this realm of creation. Bravo!

These CNC machines are a marvel of engineering. Engineering a machine that enables other engineers to produce fantastical parts to further progress engineering is so freaking cool

This just completely blew me away

Definitely looks like a Hyperganic part! This elevates the role of engineers to the next level and you guys did such a fantastic job at printing and presenting it. Moving in the right direction! 🤯

@8710ify

2 жыл бұрын

It is!

@Loserstakethebait

Жыл бұрын

How does this elevate the role of engineers? Lol if ai can do this that means the value of real engineers is significantly lower. Why pay an engineer tons of money when ai can do it better?

@oggyoggy1299

Жыл бұрын

@@Loserstakethebait Who engineers the AI?

@SneakyLittleHobbit

Жыл бұрын

@@Loserstakethebait This just takes away the complex calculations that would otherwise need to be done manually for more complex parts. The engineer using this AI would give it a general model with all the features they want, then the AI would do all of the time-consuming optimizations.

Yes! This probably one of the coolest projects you guys have ever done!

@trevorgoforth8963

2 жыл бұрын

Thank you, I’m glad you enjoyed it!

I would love to see the stats on the differences in performance between the regular version of that part versus the algorithmic designs. That way I can quantify the true significance of the variances in the software's abilities to optimize tolerances like that. Wow! Mind blown. 🤯

@tristanmoller9498

Жыл бұрын

Yeah the part looks cool but I wonder how much more effective it (so actually how much more effective the AI) is. Would have loved to see him dive into the performance of the AI a little more.

@egoinjury

3 ай бұрын

Bet it doesn't even work, let alone be better

@unaffected_covid

3 ай бұрын

@@tristanmoller9498 Exactly!

@unaffected_covid

3 ай бұрын

@@egoinjury Let's hope so.

This kind of new Hi-Tech just blows my mind and blows it even further when you think about what kind of awesome things are going to come out of this kind of technology! Simply astonishing!!

I saw the part in the thumbnail and already knew it was a Hyperganic part 😂 So cool!

Laser sintering is probably my favorite additive manufacturing process, I look forward to affordable polymer sintering machines for the home shop.

@subspaceanomaly

Жыл бұрын

someone at my art college built a solar sinter using a big fresnel lens and a solar powered bed to use sunlight to 3d print sand into glass in the Sahara desert. Was a nice project and scaled up you could print little houses etc

This is breathtakingly phenomenal engineering, limited by imagination only!

The soundtrack going through a low-pass filter as the camera submerges is a cute touch !

@spanks6947

Ай бұрын

....Cute?

@liotier

Ай бұрын

@@spanks6947 I might have weird tastes !

@spanks6947

Ай бұрын

@@liotier I reckoned that from your comment. But, fair enough 🤙

This is definitive next level manufacturing. Awesome technology!

Awesome video guys. Keep ‘em coming. You are an inspiration to all of us.

My mind is exploding with possibilities !! Thank you for taking me to another world and one I can revisit, like a previous poster said it’s like Star Trek !

This will save my company a lot of money that normally would have been wasted on engineers. Record breaking profits this year!

Unreal. Literally next level stuff. Loved the bloopers at the end of the video BTW.

@trevorgoforth8963

2 жыл бұрын

Thanks haha there were plenty of bloopers to choose from 😆

That style of 3D printer is definitely the future of manufacturing. In the near future I suspect that that full part could be made in less than an hour with a much smoother finish. Being able to create anything an engineer can dream of is incredible, even a couple of years ago a part like that one would be impossible to make that small. Having to make it in many individual parts and needing the room to assemble everything wouldn't be possible on a smaller scale. Having A.I. design it just makes it even better.

@johntheux9238

2 жыл бұрын

What about bound metal powders? (like metal injection molding feedstock, but in a powder) You could use the eos laserprofusion to make millions of parts and then just sinter them.

@RadDadisRad

2 жыл бұрын

Metal additive is the next wave of manufacturing.

@subbot8077

2 жыл бұрын

@@johntheux9238 you mean like binder jet printing? Desktop Metal has the P-50, which is a really fast bjp printer designed for large-scale manufacturing

@johntheux9238

2 жыл бұрын

@@subbot8077 Either binder jet or a thermoplastic binder. Both are great.

@johntheux9238

2 жыл бұрын

@@bachelorsdegreeakinci You can use an Xjet npj printer for fine details or a desktop metal production system for high output. There is not just one kind of printer...

This is so futuristic, really look forward to the efficiency gains that designs of such will bring to the new generation of machineries esp. Jet engines.

Awesome! Love to see a static and dynamic balance op. Also, real operational Temps? Not requiring single crystal high temp blades, obv... Thanks for sharing!

Exploiting the capabilities that exist in our time and using them in the right place. This is what we are used to seeing on this channel 🔥🔥 Thank you Mr trevor and Mr titan for this awesome video

@trevorgoforth8963

2 жыл бұрын

Thank you Mohammed!

This part looks awesome. So cool to see how it's made. At 5:35 you can see a crack/fracture going horizontally through the part. Any explanation for this? Thanks for your content. I love learning about this stuff!!

@NickOvchinnikov

2 жыл бұрын

I saw that too

@modelcitizen1977

2 жыл бұрын

I imagine they have a few failures occasionally.

@roskoeheat

2 жыл бұрын

Layering issues maybe

@barrys7570

2 жыл бұрын

It looks like a fantastic new process, but I can't help but imagine the turbulence issues due to the grainy texture (resolve by manually porting?) and the extreme care needed in keeping impurities/odd grains out of the powder. Good lord, the seed money you'd need to get all this on deck and functional...

@ni370

2 жыл бұрын

@@modelcitizen1977 we are all human;-)

I would love to see the part in action or to see some computer modelling of how it works.

I wonder at the possibilities of creating a part by rapidly cycling between printing and machining. Print a few layers, machine them to precise spec and surface finish, add more layers, machine them to spec, and so on and so on. With current processes, it would take months, maybe years, but fully integrated printing/machining holds so much promise for creating mind-blowing parts. The future will be amazing. 🤗

@CarlosCruz_cc

2 жыл бұрын

it's already possible. Search "Hybrid machine 3D printer and 5 axis milling machine" on KZread.

@Jessie_Smith

2 жыл бұрын

Actually, Sodick makes a 3d printer that does that very thing. I am sure others make a machine that does it as well but I personally seen a Sodick do it and they are super high quality machines. It was amazing at what they could do.

@rich1051414

2 жыл бұрын

There are hybrid machines that exist that can sinter and CNC. There are still challenges when working with layers. Also sintering itself has strength limitations.

@cameronlapworth2284

Жыл бұрын

Yes there are even machine that can change materials progressively as the part is made. One video I saw they were applying it to cutters for mining using a more flexible but soft metal in the core and gradually transitioning to harder but more brittle metals at the cutting faces. Essentially progressive alloys. Otherwise the parts either have to be made of one material only either hard and brittle or soft and strong but wear out quicker. Materials that can be printed to gradually magnetised over the part etc. Amazing stuff.

@skenzyme81

Жыл бұрын

Had no idea. My mind is blown.

Can you comment on the layer break at 5:42? How prevalent is that with this process and how do you account for it?

@rixogtr

2 жыл бұрын

I noticed that crack too, would be interested to see their reaction to it

@nicewhenearnedrudemostlyel489

2 жыл бұрын

and the super nasty widowmakers at almost every orifice... probably just add to the flame right? -__-

@rixogtr

2 жыл бұрын

@@nicewhenearnedrudemostlyel489 what are widowmakers ?

@Almalki-OG

2 жыл бұрын

In understandable words, different layers cool at different rate causing them to engage differently causing tension between the layer which leads to fracture. There is a way to get around this effect by using a special type of oven once you have finished printing. This oven uses pressure and heat that bonds the layers better and then cools them uniformly.

@MattOGormanSmith

2 жыл бұрын

@@Almalki-OG This process scrapes each layer of powder flat, so uneven shrinkage is corrected on each layer, provided there is enough laser power to weld through to the deepest shrunk part. This is where the art of tuning for power and speed comes in, which wasn't critical for this display part. I suspect they just used the same settings as they'd tuned for the actual part, and this cutaway curled slightly

combining algorithms and additive manufacturing to make parts like this is going to open up a world of possibilities. Even more so than it already has. I can't imagine how expensive this part would have been if it was made in a traditional way, and how long it would have taken.

@exhibitdeveloper

Жыл бұрын

It would have been impossible to machine as one piece, so it would have ended up as a bolt-together assembly that was much bigger and more complicated. It would be difficult to cast, I imagine, but I’m not even remotely familiar with modern casting technology so it’s possible it would be impossible to cast.

Wow. Thanks for posting this. I had no idea 3D printing has evolved to this level!?

Wow, that is *AMAZING*, the finished part looks like alien technology from a sci-if movie. This is truly going to revolutionize “machining”/fabrication tech, but I don’t see it displacing normal subtractive machining, as that’s much more efficient in machine time and supports a much wider range of alloys. There’s definitely a growing market for machinists that are familiar with this sort of tech, though. Titan has created a phenomenal organization to build the next generation of engineering talent, you guys are incredibly fortunate to be involved with it!

What amazes me the most is that these type of structures have a futuristic, almost alien-technology vibe to it. Isn't it crazy that AI creates what we would describe as highly intelligent design anyways?

@spaceengineeringempire4086

Жыл бұрын

It’s mathematically the most efficient design

@youtuberconsuming6411

8 ай бұрын

it's not AI. it's algorithmically generated, huge difference.

Wow, definitely got to glimpse the future in this video - thanks!

From start to finish, WOW. Absolutely amazing.

@ozhinz

Жыл бұрын

no, from halfway to finished

That's not ai. That's algorithmically generation

This is an excellent video, and I love the concept of Algorithmic Engineering. Interestingly, @5:52, if you pause the video, you can see a bit of a horizontal fracture around the right side of the head of the piece. I wonder, do 3D printed pieces always have a chance of not bonding (atomically?) in random areas?

@Professor-Scientist

2 жыл бұрын

It's caused by algorithmic polypressures that build up and cause internal Pythagoras fractures that refract and cause horizontal cracks.

@Almalki-OG

2 жыл бұрын

In understandable words, different layers cool at different rates causing them to shrink differently, causing tension between the layer which leads to fracture. There is a way to get around this effect by using a special type of oven once you have finished printing. This oven uses pressure and heat that bonds the layers better and then cools them uniformly.

@bjorn5209

2 жыл бұрын

I work in Additive. It is indeed one of them most difficult things to get right. We have a super high scrap rate. Even metal bars crack that are 2-3cm cubed.

@OnionKnight541

2 жыл бұрын

@@bjorn5209 Ahh, that's what I was thinking ! I can imagine the high scrap rate.

@OnionKnight541

2 жыл бұрын

@@Professor-Scientist 🤨

I knew the those small 3D printers came out , that it just be a small matter of time tell they hit the machine shops and as a machinist I know we love The challenge of new innovation and creation , seeing this video I’m wowed 💯🫡🍻 Looks like a part for X-space Appreciate titan titan manufacturing for bringing this forth his video I remember his first videos proud to be a viewer 🍻👏🏽🤜🏽🙌🏽🤛🏽👊🏽

Man, this is so amazing. Incredible, really, and really exciting!

For what fuel and oxidizer was the injector plate made for? And what combustion chamber was it designed to fit in with? Also, I love your videos.

@gurbanguliberdimuhamedov4228

Жыл бұрын

For rocket booster

@GamePhysics

10 ай бұрын

@@gurbanguliberdimuhamedov4228 You didn't even answer one of those questions.

This is so cool, i never been into machining and this looks really interesting.

so pleasant to see you use our trumpf equipment

There's many of these 3D printed parts as I've seen I still have a hard time understanding how a combination of the dust and the laser make such an intricate part and everything has perfect surface texture. Incredible machine.

@paulrei00

2 жыл бұрын

First of all, laser melts titanium powder and forms the very first layer of a part on a moving base. Then a base with this first layer goes down for a height of one level. Machine put titanium powder on top of the first layer and laser melts powder to make a second layer. Process continues until all layers will be finished. As was said in a video, this part do not have a supports. This can be done by this method of printing, when, unlike of plastic 3D printing, part is printing downwards. Because of this, whole part is surrounded by powder (even inner surfaces) and powder helps to prevent deformations.

@randywl8925

2 жыл бұрын

@@paulrei00 No, I just watched the video. It's magic, that's that's all ...it's magic. 😁

@krusher74

2 жыл бұрын

perfect? it's very imperfect. far from smooth.

@randywl8925

2 жыл бұрын

@@krusher74 Define smooth. 🙄

@kylehenline3245

2 жыл бұрын

​@@paulrei00 We actually do have top down resin printers that use a scanned beam and vat of resin in a very similar manner to this machine, but yeah it's no help with supports.

The future is going to be wild with this AI design, that injector head has an almost organic look to it.

@youtuberconsuming6411

8 ай бұрын

it's not an AI design, it's an algorithmic design. they are just throwing AI around as a buzzword.

4:04 This was one of the most insane GUIs I’ve ever seen. Topped off by the green check down in the bottom corner.

Bro this is the cleanest machine shop I’ve ever seen, looks like a dang spaceship

So. This does not sound or look like an AI has created the design. Designing using algorithms is just designing using code instead of drawing every line manually.

@widgity

2 жыл бұрын

Yeah, sounds like it was just a more powerful version of scad.

This is extremely inspiring. ML tools are really good at compressing human iterative cycles. So conceptually, I am totally on board with the concept of getting to an optimized design via ML software. Then printing it out directly is the next logical - perhaps necessary - step to reifying a complex design. Well done!

This is INSANE. Its integration level is literally astonishing it will be.

Thank you for sharing this technology. Very impressive.

"Saves engineers a ton of time" translation to reality: "we want to pay fewer engineers less money"

Amazing video and loved the complexity of the part! However I did notice some imperfections and wondering how you would inspect the part on the inside when it was completed for imperfections????

@xxportalxx.

2 жыл бұрын

Probably xray it, pretty sure they xray a lot of aviation equipment anyway

@DSiren

2 жыл бұрын

@@xxportalxx. You could also use dental or surgical cameras to scope down the openings. Only reason we can't machine in those spots subtractively is because it's too expensive to make a thousand dedicated tool bits for one part. Otherwise it is 100% possible to make this part with just subtractive manufacturing, just so unbelievably horrific nobody would even attempt.

@xxportalxx.

2 жыл бұрын

@@DSiren I would wager this particular example couldn't be made in one piece by subtractive machining alone. There's complicated internal cavity structures that aren't particularly accessible.

@DSiren

2 жыл бұрын

@@xxportalxx. it would be an ass to make the thousand or so custom tools but yes you could do it. You'd probably need a half dozen special chip extraction tools also, but you could do it. Worst case scenario you're using a wonky file to do it.

@xxportalxx.

2 жыл бұрын

@@DSiren I'm not sure how you'd envision those internal cavities being machined, moreover how you'd machine them with any level of precision

I haven't even started this video and I'm excited to see the result! 🤠

I wanted to see it working!! It looks amazing

I liked at 6:32 the music being muffled as the camera went underwater. Nice editing touch!

I have a resin 3d Printer at home and am asking myself how do they get the metal powder out of the cavities and hollow spaces? As far as I can tell everything should be filled to the brim with powder and I don't know if a vacuum is reliable enough to clean those nested spaces inside the part? When using the resin printer, which works similar but not quite the same, you often have pocket of resin which you have to drain, but how does this work with a metal part?

@Hydrazine1000

2 жыл бұрын

As long as there are no fully enclosed voids, the powder will be able to come out. The powder for a powder bed printer is all spherical, so it flows very nicely. Some parts of the print may need some help with some suction, but you'll get the powder out. (Unless you _deliberately_ enclose powder, which can be a valid approach if you want to reduce the heat transfer for a given section.)

@J0nny_

2 жыл бұрын

@@Hydrazine1000 Thanks, that explains how they are able to get it out. Resin is quite viscous and if you design the holes too small it will take a long time to drain, if at all

Thankyou so much for spending the money to print a nozzle we could look inside of. And it's absolutely fascinating that the program is open source. It had to have cost a minimum of millions just to create such a program.

You're absolutely correct ! I am super impressed by everything in this video from the part to the material to the printer turn everything! And this is only gonna get faster and cheaper And more common place. DAMN!!!!! We'll be more advanced than star trek in no time, probably a generation. All except the faster than light speed, travel.

We have one of those 3d metal printers at my work. Super cool. Made a few titanium things and they are pretty dang strong too as we tensile stress them.

@aaronself2411

Жыл бұрын

Does your shop rent out time on it? I have a clone commando cosplay that id like to make slightly too real. Save me a lot of molding and casting time thats for sure.

Wondering how strong the part is? Will it be brittle could it be heat treated for strength? So many questions!! Amazing where tech is going!

@khlorghaal

2 жыл бұрын

@@sergiugabrielpopovici5664 tubes only make material strength anisotropic; it reshapes the strain tensor without increasing total strength

@khlorghaal

2 жыл бұрын

@dan forged parts have approx 20-40% more strength, its plausible the design technique warrants the loss

"They were not designed by a human" ?? Uhm... It must have been a human that set the boundary conditions for the part. You do need to give the software basic information like reference planes, external shape, location and size of the connection points, location and size of all those injectors, that sort of stuff. The software _literally_ just fills in the blanks. Well, actually, it starts with a block and all the functional connections and passages. Then it simulates the part and determines where material can be removed. After adjustment of the virtual part, it will do the simulation of heat, stresses and flow again. Then the software will adjust the part once more, run another simulation, again take out material where it's not needed (and add back material where it is!) and so on. Rinse and repeat untill the part is stable. There is still a human involved to give it the initial start though, so it's _MOSTLY_ software generated/designed.

@Turboy65

2 жыл бұрын

I'm sure that the basic design was established by an engineer, and optimization was AI assisted. We're a long way away from telling Siri to "Make a rocket combustion chamber for a SPACEX Merlin second stage engine." and getting the correct part.

@widgity

2 жыл бұрын

Also sounded like it was all just defined algorithmically.. no 'AI' at all.

@Hydrazine1000

2 жыл бұрын

@@widgity I can't fault them for using the term AI. AI, Artificial Intelligence, is a catch-all that _typically_ involves use of neural networks to get results, but that's not by strict definition. In this case, the software is basically doing automated optimisation, and that latter bit can still be called artificial intelligence because software generates an output without any human intervention.

@egoinjury

3 ай бұрын

Unfortunately your comment isn't getting many likes because people want to believe this extreme scenario that humans are already or soon to be redundant, rather than , designer engineers use computers/algorithms/AI as tools that don't have a clue what to do without guidance

it's people like you that give me a hope for the future for America god bless the work you do and how you do it I think you guys are pure genius

Wow nice one.. The doors this technology opens its unbelievable. Hope the new generation will going to use it to create crazy things

5:51 seems to have a crack. Nonetheless, crazy impressive !

I love to be the first one here ♥🔥

This is jaw dropping. I'm not ready to retire, and I'm having trouble thinking of a career that won't be impacted in the next 5 years or so. All of the coding jobs are going away, unless coders can outcode AI (the can't). All manufacturing jobs are just about done for unless employees can outcompete Teslabots (they can't). Everything is going to drastically change.

This blows my mind. Amazing

"39,000 g is about 39 kg..." eh no it is exactly 39.000 kg, it's metric, dude!. Sorry had to get that off my chest.

looks good but i have one thing 3:44 not about 39kg its exactly 39kg bec. 1000g = 1kg and use liters insted of cm³ 1000cm³ is 1liter / 1dm³

@trevorgoforth8963

2 жыл бұрын

Considering my scale on the powder prep station is in Kg, the powder containers are in Kg, the powder density is g/cm³, and we’re not measuring liquid…. I find it more commonsensical to use Kg.

Te vuela la cabeza! Excelente vídeo.! Gracias. Saludos

That's an insane piece of engineering for sure ☝️👍😎

So you printed a useless paper weight?

That was insane detail. What amazes me is that much tech still uses an old USB port and dongle lol. They break all the time.

i cant wait for this algorithm to release, ive always wanted to design nature inspired mechanical parts

This man is working my dream profession and I'm super jelly

mind blowing what you guys can do.

Wanting the printer reminds me I those old crop circle videos. Very cool!

perfect. open source pushing innovation without Greed...

Ti 6Al-4V is the most widely used of all the alpha-beta titanium alloys. It is typically used in the annealed condition, at service temperatures through 750°F. However it may be heat treated for high strength in sections under 4" thick. Hardenability is limited and sections over one inch may not develop full properties. Ti 6Al-4V is welded with matching or with ELI filler wire. Mill anneal: 1300-1450°F 2 hours, air cool. Recrystallization anneal bar for better ductility and fatigue strength, 1750°F 2 hours, furnace cool. For maximum fracture toughness and SCC resistance: Beta anneal 1950°F 1-2 hours, water quench. Then age 1150-1300°F 2 to 4 hours, air cool. For maximum strength: solution-treated and aged (STA) condition is: For sheet, 1675-1725°F 5 to 25 minutes, water quench. Age 975°F 4 to 6 hours, air cool. For bars and forgings, 1675-1725°F 1 hour, water quench. Age 975-1025°F 3 hours, air cool. For increased fracture toughness, but lower tensile strength: precipitation treat (overage) 1150-1250°F 4 hours, air cool. Stress relief annealing is commonly 1000-1200°F 1 to 4 hours, air cool. Ti 6Al-4V is resistant to general corrosion but may be quickly attacked by environments that cause breakdown of the protective oxide. These include hydrofluoric (HF), hydrochloric (HCl), sulfuric and phosphoric acids. Inhibitors may help for the last four but not for HF. Ti 6Al-4V resists attack by pure hydrocarbons, and most chlorinated and fluorinated hydrocarbons (provided water has not caused formation of small amounts of HCl and HF).

AI in developing machines / parts / software is going to be such an efficiency boost in almost all industries

Nothing keeps me up at night like the thought of an ai designing and printing whatever it wants

That's amazing 👏 good job!

Brilliant! Thank you for sharing this video! Greetings from Nubia Village, Madang Province, Papua New Guinea.

Impressive! What a time to be alive.

We've moved so fast with technology !!!

Amazing. Great video. Subscribed.

Super cool Thanks for sharing!

Una ingeniera diferente un paso al futuro saludos 🇲🇽

So cool these processes. With (maybe) a quantum computer generating the set of all possible solutions to a design parameter set and an AI doing the evolutionary winnowing/optimization and interfacing with the designer/parameter-definer some crazy and unexpected designs will result. With 4+axis multimaterial 3D printing the products will be as solid state and durable can be. Can’t wait to see where this goes.

I would have way too much fun with a machine like that! That part would be impossible to make with regular cnc machining, and casting it would have an unacceptable reject rate. Also because the way it was made the strength would be insane. Try making parts out of superalloy powers like hasalloy, iconel, stellite and see if it works. The quick heat of the laser should keep the metals from separating like would occur with prolonged high heat processes. Might even work for glassy metals as well. Great stuff! 👍

This is just amazing.

That is such a sick printer!

"But you still need an engineer to write the algorithm" So this just designed by an engineer

I can't wait to start using the Hyperganic software. The potential of AI is boundless. The future really is now.

Super dope ^^ Fresh tech ... love it

@AaronSchwarz42

41 минут бұрын

That machine looks expensive as does the powder and argon fill gas lol

Don't know if I'm more impressed with the AI engineering or the guy 3D printing with titanium