It's been brought to my attention that the audio is in mono in this video and I apologize for that. I usually record in stereo, but did a firmware update on my mics the day before I recorded this one. It seems that it changed a setting and was recording in mono with a backup channel. I have addressed this now and future videos will be back in stereo!

@dominicbavaro3043

Жыл бұрын

Do people actually care about this stuff? It sounds fine

@818marface

Жыл бұрын

Will you print something for me ;) I have an idea but I can't seem to find anything similar in any shops or ebay

@Magickmaster3

Жыл бұрын

@@dominicbavaro3043 If you ever wear headphones/in-ears while watching something in mono, like when you are in public, you'll feel your ears falling off.

@LonnieBruton

Жыл бұрын

Ha!, I literally just reached out and touched the cone on my left speaker to make sure it was on. good to know.

@justinlimitededition7457

Жыл бұрын

@@dominicbavaro3043 yes wearing headphones

My right ear feels so much more informed about 3d printing. Now to flip the headphone and listen again.

@valorantkeys4709

4 ай бұрын

Do you wear your headset backwards?

@localcringeguy

Ай бұрын

@@valorantkeys4709I may not be the commenter, but yes.

@OGgamer90

3 күн бұрын

Me to

my left ear enjoyed this

@teeyyeet2245

7 ай бұрын

I basically messed around with my earphones trying to figure out what's up 😂😅

@sharpblad3

Ай бұрын

holy I thought my lovely right speaker had an issue 🥺😔😅

@OPMCLOL

Ай бұрын

i thought his speech entered ur left ear and exited from your right ear.

@tomascernansky3960

20 күн бұрын

😂

My right ear feels lonely

@Jacob-Evans

2 ай бұрын

Same

@Jive33

2 ай бұрын

Be like VanGough and cut it off

@nolangrass8858

23 күн бұрын

had me thinking my headset was broken

@SLG_rim

17 күн бұрын

Fr

Why is the stereo more to the left? is it just me?

@DenisBremora

Жыл бұрын

nope, hearing it with headphones is very... annoying -.-

@TheEdgeofTech

Жыл бұрын

I'm not sure what happened, I'm addressing it ASAP and you won't see that again. Usually I record in stereo so I'll have to check. I know my wireless mics had a firmware update and I wonder if it reset that setting.. sorry about that

@DenisBremora

Жыл бұрын

@@TheEdgeofTech yeah, such things happen 😅🤷‍♂ my comment wasn´t there to abuse you, only to answer for miguels question ^^ sorry if it was a little bit rude 🙈

@bengreathouse6317

Жыл бұрын

He didn’t print the right microphone

@skimsamy

Жыл бұрын

@@bengreathouse6317 💀💀💀

Thank you so much for this! Clear and to the point. All the steps and terminology in less than 7 min is amazing! I wish you covered all of my hobbies😂

I'm looking to get into 3d printing and this was exactly what I needed to understand where to start and what all the terminology means (slicer, that had me baffled before I watched this!). Plus it was entertaining as well :) Thank you!

@TheEdgeofTech

Жыл бұрын

Glad I could help!

@williamsheehan1144

8 ай бұрын

Hi i just read your comment about 3D printing. You said that this video made helped you make a decision to bye one. Has it all worked out or do you regret buying it? I’m asking because I am thinking about getting one and I have never used one. Can you tell me if it was a good idea. 😊

@Vincy2006

Ай бұрын

@@williamsheehan1144 Well, i’m not him/her, but I will say i have not been disappointed with my printer, although printer fails can happen simply change up some settings and you’re all good to go. i’ve printed characters like Luffy, Killer Queen, Yuta Okkotsu and they all look great. so definitely a great investment if you’re not paying too much for a beginner printer

For such a hugely diverse hobby/pro space I think you nailed it for a beginner highlights video. Great work and keep it up!

@TheEdgeofTech

Жыл бұрын

Thanks a ton!

Thanks for this! Not sure why the heck I've waited so long to get started on 3d printing but here I go!

@TheEdgeofTech

Жыл бұрын

Awesome!!! I hope you love it!

Love your video. You're a great teacher You make it easy to understand and it doesn't seem like a huge weight on my shoulders. Easily dissected Thanks

Thank you so much for this. We live in Australia, my husband is very technical and we may save up for a 3D printer. He will love this. Thank you.

THANK YOU SO MUCH! this guy is so wholesome

Great video. Clear instructions covering just enough to explain the basics in the fastest time.

Vey basic overview of what I'm getting myself in to. Exactly what I needed. Thanks.

Huge thanks for the excellent beginners' guide, it's really useful and looking forward to learning more from your channel. 😀

Hey Jim, Brilliant Video... inspiring new 3d enthusiasts... top work and simply presented too bring all levels of understanding 👏 Amazing

@TheEdgeofTech

Жыл бұрын

Thank you!

I’m a kid and I know it sounds like a lot but it took me four hours which I’m super happy about 😁

I found this information very helpful. As a teen who wants to have my own 3d printer, it helps me alot to understand how it works and how to print out the 3d object I desire with the right information. Thank you❤

Thank you so much this is a wonderful beginners video, and your personality coming through in the video made it 10x better! Thanks very much.

A lot of knowledge in a short amount of time. Thank you! I will watch this a few times ha ha. Very clear.

Perfect. Everything I needed to know. Thank you!

Another awesome video, keep it up. Thank you for sharing your knowledge with us.

This video was very helpful! Thank you! I love your little 3D printed dude!

Super clear and straight to the point! Thanks!

Great video. Thanks for laying everything out for a beginner. So helpful.

@TheEdgeofTech

Жыл бұрын

Thank you for watching!

Thanks for being so helpful with this video. Lots of information and fast paced. 😊

@TheEdgeofTech

Жыл бұрын

Thank you for watching!

Great video, gave me an overview to the subject, clear and easy to follow.

Been looking for a guide that’s straight to the point. Subscribe

I started dabbling in 3d printing with 3D pens and bought my first 3d printer in 2019. 4 years later the technology has made excellent progress and the features we know are possible back then but hasn't existed yet is finally available today.

@TheEdgeofTech

Жыл бұрын

Great story!! I love how fast this industry is moving!

@Hot18Shot

Жыл бұрын

Out of curiosity, what would be some examples of that? And where does 3D technology looks to be headed and what improvements do we see it getting?

You are so good at making this topic summarized, concise. Great video for starters. Awesome!

Clear and to the point. Dosnt drag on and gives great explanation.

Jim, amazing intro for a new hobbyist in under 7 minutes. My Bambux1 Carbon and P1P are my 9th and 10th printers, wish I had one of these as my first. Bambu Studio works well for slicing and sending the files directly to the printer, and the printers just work. Your videos convinced me to add them to my collection and glad I did. Thanks for your videos and reviews

@TheEdgeofTech

Жыл бұрын

Thanks David! I am glad you are enjoying them! I can't wait to see what kind of awesome things you print with them!!! Thanks for watching!

@ShyneflowLC

Жыл бұрын

Do you honestly recommend an x1c as a first printer? I've been debating it for mine and I hear conflicting info... I hear that I'll be behind if something goes wrong as I'll know nothing on where to troubleshoot or fix... Ugh

@woodwaker1

Жыл бұрын

@@ShyneflowLC I do recommend it, with some cravats. One that you have the money to do it, as you know it is not inexpensive. Two you really want to get into the hobby. Third, you do a lot of research, which sounds like you are doing. This has been my easiest printer to get going, be careful and follow the setup instructions. I would suggest to get the printer tested before trying the AMS if you get both.

@ShyneflowLC

Жыл бұрын

@@woodwaker1 I was eyeballing the combo with the AMS for sure. So you're saying you'd get setup and run without it first before testing out multi filaments ?

my left ear loved this video. All jokes aside, great job! I learned a lot.

needing to learn about this. thanks, keep posting.

Exactly what I was looking for. Thanks!

ive been printing 2 years but it never hurts to get a fresh up course ty

Excellent video Thanks for sharing!

Just got one for Christmas, let's see how it goes. Thanks for the video

Short and sweet. Big thumbs up

I’m a 3d printer newbie. Thanks for this video.

awesome! Thanks I'm about to get into printing!

This was super helpful, thank you!

Thanks bro very informative a absolute winner

thank you so much i am buying a 3d printer and came to the right place to learn about it

Im definitely gonna watch this many times It such a great explanation

Amazing explanation! Thanks.😎

Dude! You're awesome! Thanks for this video..

Great job! Super informative

Great video man. Thank you.

Thank you. Great starter video.

IMHO the best starter printer bang for the buck is the Elegoo Neptune 3 Pro. I've had nothing but success with it from the first test print. Setup was easy, it's not blazing fast but for churning out entire tables worth of wargaming terrain cheap it saves buckets of money. I am using Lychee slicer and it's been easy as pie, and isn't a printer that needs a bunch of upgrades. Self levelling, offset was super easy to set, direct drive filament feeder that is easy to load. As someone who wanted to print more than fiddle around with the printer it's been a good purchase.

@phillybruhhh7344

10 ай бұрын

Nice! I am finally getting my first, pre-ordered Neptune 4pro😊

Thanks for the beginner video it was really informative

Great info and amazing for the 3D community

Thanks for the info. I’m keen as now to print something. 👍

What a cool dude. Awesome video!

Great video man! Subscribed and liked, i would recommend panning your mic to the middle, you are sending audio to only one side. Just FYI, but other than that, Amazing video, thank you!!

Thanks for posting. Just bought a Anycubic Max.

thanx...great video....i think i need one....for my modelling and rc trucks

My left ear really enjoyed this video thanks 🙏

Just got a 3d printer and this was awesome info.

Great video! Thanks!

This is a really resourceful video for people who are wading into the 3D printing, thank you!

@loraleigh5249

Жыл бұрын

Show us what we are worth and everyone around here seem to forgot

@loraleigh5249

Жыл бұрын

You can put in and not even have to talk to me and take up forever again. It'll be almost 17 years and knows the exact date. Your aunt you won't want to know the whole story we need attorney at the door so you get all Indian all credits area you could shock Me I don't have that Wi-Fi cut off what are you going to do then

@loraleigh5249

Жыл бұрын

I'll go to the world keep my family safe

@loraleigh5249

Жыл бұрын

Nughouse Worldwide

@loraleigh5249

Жыл бұрын

American dream house.... We probably mom I probably selling get out of here to on The water somewhere living it up the and pay a bitch up.❤ No a celebration. Duh At the Whitehouse🎺

Both my ears was informed because I watched this on my phone

awesome video man , im going to start 3d printing...

Thx it helped me i loved the vid, its short and easy!

New subscriber! That was excellent

Good, simple video on getting a 3D printer. However, did not see the design websites in the description that you’d mentioned in this video. Overall, this is a good short video!

2 minutes in, and you've already got a new subscriber. Awesome and welcoming presentation style. Now to figure out how to explain the many big boxes arriving on the doorstep to the wife.... 🤔🤔

@TheEdgeofTech

Жыл бұрын

Haha Nice!! Welcome! Hope you love the hobby!

thanks for the guide!

Good video it was very helpful thanks😃

Great vid, good job🎉

I have the tinytina 2 wiibuilder pre built and it is brilliant for those who are just starting and the slicer software is great for new people just getting started and being dyslexic I started my business with it.

@TheEdgeofTech

Жыл бұрын

Very cool! I don't think I have played with that printer yet, but I should check it out! Thanks for watching!

@crowguy506

Жыл бұрын

@@TheEdgeofTech Skinned Cura, Abl and cheap. Ender 2 size.And it’s sold under several names.

I have noticed quite a few novices with Christmas printers in my FB groups, will direct them here!

@TheEdgeofTech

Жыл бұрын

Thanks Andrew!!

Fantastic video!

Very helpful, thanks!

yao amazing video! would you have a recommendation of which 3d printer to use for a dentist? Im mostly a beginner and would like to use different colours! Thanks in advance!

My left ear loves this video

The era of high-speed printing has begun, and flsun is the leaders of the fast era , you need to review flsun V400

Good video man, thanks.

You're a huge help thank you

Wow Ty! My mom is getting me a 3D printer for my birthday so I’m trying to learn about it!

@TheEdgeofTech

Жыл бұрын

Awesome! You will love it!

The printing is the easy part. Most every item I've felt 3D printing might work for would have to mate up with an uneven surface of compound, irregular curves and angles. I've been searching the web for info on how to design parts to fit things that aren't flat without success.

@notanymore9471

5 ай бұрын

Laser scanner

Thanks for the help

I’m so glad I found this video

Thank you great video

If i ever own one i will ABSOLUTELY print sanrio stuff for sure.

Good luck for everyone🎉❤Il buy it soon

My right ear disliked this video. My left ear likes it.

my left ear thanks you for these tips!

Hi, Great Video, what type of plastic would you recommend to build Taillight Housings for a Vehicle?

I remember being in school and my teacher was talking about her son worked for a company building printers that can make pretty much anything I just realized she was talking about 3d printers

I need to learn because I plan on 3d printing a noble 6 armour set for next year Comecon and Halloween

Hello, I'm liking your channel. I'm intrigued by the whole 3d printing concept. Question... Is a laser scanning system required to print items that are not available? Specifically, I would like to print various car engines for scale models. What would that require? Please advise. Thanks, Greg

my left ear loved your voice

my left ear really enjoyed this video

First time watching your videos and they are great-subscribed immediately. Question: With budget of about $750, which printer would you recommend? I am new to 3D printing.

@jus.me.tanzks5834

6 ай бұрын

At the very beginning he mentioned two. And the second one was around $700

I just got my first 3d Printer. I made a simple Hook and then a cool dragon. So I decided to do something different and make a model of my wife's fav critter in ARK. (No we are not kids we both over 60 enjoying our retirement) Now I want looking for the perfect model and found it my mini factory, Now there were 2 SLT of the same model one supported and one not. I started to print the supported one and learned that I will be wasting a lot of Filament and time since I should have used the non-supported one. It has a lot of pipe type of supports that I will be cutting off. Thought I would pass this lesson on. Other then that I am having a blast and I have 30 models I plan to print and use for gifts and decorate our desk.

the Future insane the fact that we can just do this😮 imagine I had this tech 20 years ago

🇬🇧 Thanks, excellent video..

As a guy who wants to start making custom clone troopers to sell this is really helpful