Best Ender 3 Pro Upgrades !! kzread.info/dash/bejne/hGx31dOOY8zQgsY.html

@raziarahmat4299

2 жыл бұрын

I live in Karachi Pakistan I follow your

@davischairmanindustries3412

2 жыл бұрын

How long of an experience have you had with 3D printing? Do you know the best FDM printers for beginners?

@AustenHartley

2 жыл бұрын

@@davischairmanindustries3412 5 years ! And yes for beginners it’s an ender 3 or a Prusa MK3S+ if budget permits.

@davischairmanindustries3412

2 жыл бұрын

@@AustenHartley What do you mean by, if budget permits?

@AustenHartley

2 жыл бұрын

@@davischairmanindustries3412 the Pursa is much more expensive.

Amazing video! Only thing making me mad is the misalignment of those foam soundproofing panels lol

@AustenHartley

3 жыл бұрын

hahha the wide angle lens is not good for straight lines !! Will be fixed for next weeks video. Still a bit crooked for this weeks :)

@robertruschak7083

3 жыл бұрын

Print your own money like the Federal Reserve

@Revenant483

3 жыл бұрын

You said exactly what I was going to say!! That was triggering the hell out of my OCD 😂

@goldenfox334

3 жыл бұрын

Why did you have to point that out 👿👿👿

@jroc2k

3 жыл бұрын

Ummm ok

Another con of 3D printing I think should be mentioned is the maintenance. Not only do prints fail from time to time, but as you use a printer, it'll require maintenance. After a few tens of hours of printing, the bed will need to be re-leveled. After hundreds of hours, nozzles will clog, belts will break, wires will fail, parts will come out of alignment, screws will loosen, the bed surface will degrade. 3D printers are highly mechanical devices and that comes with a lot of wear and tear. Make sure to keep that in mind when working out your pricing!

@chancewindham1718

Жыл бұрын

My balls are highly mechanized.

@tinnyelk2962

Жыл бұрын

Some of that depends because you can always use resin printers

@duelentertainment9228

Жыл бұрын

I have had my printer for about a month and have about 100 hours on it. It has clogged, failed, has had thermal runaway, and has had to re level the bed cause it raised itself a bit and the nozzle scraped across my build while I was at work

@LordEisenfaust

Жыл бұрын

@@tinnyelk2962 those have ever degrading light sources, which not needs to be replaced but the print quality goes down the nearer you go to the End of Life of the Light Source.

@hd-be7di

Жыл бұрын

Most machines need re-leveling frequently because the bed has been leveled too high with not enough compression on the springs. Silicone springs are great since the compression force goes up quickly with very little squish compared to metal springs more gradual increase. If the bed still goes out of whack often, try to bolt on some M4 nuts behind the leveling knobs to prevent them from spinning. Good luck & happy printing ;D

I've had my Ender 3 v2 almost a week and can confirm not just getting it out, flipping it on, and things magically printing. Now that I've got it rolling out objects I've moved into dabbling in design with Tinkercad and starting to see where this could be a fun side gig. I've got a custom cupholder insert finishing up now with an old android phone doing time lapse mounted to a phone tripod I printed earlier this week! Great tips !

@jessiewald4076

2 жыл бұрын

had mine for a week and it broke. Back to step 1 smh

@Falasi4

2 жыл бұрын

@@jessiewald4076 That stinks - Mine is still printing like a champ - 1 nozzle wore out about 2 weeks ago but there were spares in the supplies bag that I got with the printer. Aftermarket springs I put on day 1 have apparently kept the bed level. I've used up almost 3 rolls of filiment.

@jessiewald4076

2 жыл бұрын

@@Falasi4 yeah the belt broke on one of the axis for mine. Still waiting for customer service smh

Between your great video and my reading the hundreds of comments below, (with you surprisingly answering most questions asked) I've learned QUITE a bit. Thank you!

3 years into 3d printing, cad designing, autonomous robot building (3d printed) and now looking forward to do this as my main work. I enjoy doing this after 3 years and your video confirmed that this is the only thing I want at to do in future, specially after my friends keep requesting automotive parts for their classic cars :) Thanks for the insights. Thumbs up

@GORILLA_PIMP

Жыл бұрын

What kind of parts do you make for cars???

3d printing has really came a long way. I remember in January 2019 the ender 3 was ~$350-$400 and a kilogram of pla was $50-$75 and now 3d printing is so common, all the materials are really cheap

@user-eg2jr8dt1j

4 ай бұрын

Just bought a 10 kilos of PLA for 90 bucks bro. I feel ya though!

Great video, I've personally made over $100K selling 3D Printed products! But I'm an industrial designer and can innovate and design new products fairly fast. I have 10 Ender 3 V2's and the biggest issue when you mass print is you constantly have to maintenance printers. I spent most of my time fixing or upgrading my Enders.

@AustenHartley

3 жыл бұрын

Hey thats amazing ! Congratulations ! If you upgrade those to Prusa Mk3S+ 's I can pretty much guarantee it will save you hours a day. We have anywhere from 5 - 15 running 24/7 and they are extremely low maitinence. I started with a few Ender 3's and they are amazing machines for the price and to start with, but if you're running them 24/7 consider a Prusa upgrade !

@oarnaur

3 жыл бұрын

@@AustenHartley I 100% agree. My prusa is so awesome!

@the3dprintfarmers874

3 жыл бұрын

Get your first Prusa mk3s+ ASAP

@chuysaucedo7119

2 жыл бұрын

@@the3dprintfarmers874 started with an Ender 3, got a Prusa Mini, and now added a Mini+

@Ryezn5057

2 жыл бұрын

Do you need a larger print volume for your business? Like a cr10?

Solid vid, nice intro to 3d printing. I run 2 cr-10 V2 and one ender 3 V2 and do small scale production runs for past employers. Nice side income but by no means is this passive income. It takes ton of time, printing is a lot of work.

Good info - you touched all the pain points ;^) My goals are to tune / optimize a given print to achieve as close to "zero post-processing" as possible. In other words, for a given filament and STL, tune the print/printer to be as close to putting it in the shipping box right off the printer with near-zero clean-up. Good tips - thanks!

I actually love this idea of business, specially if you are of those people that love designing 3d stuff in a CAD software, because it also helps you to understand the fact of how to manufacture a piece, many times designers do some complicated stuff that even with a CNC machine could take so much work, so starting with a 3d printer could help to understand better concepts of manufacturing.

@AustenHartley

2 жыл бұрын

Couldnt agree more !! We print lots of products for clients and then eventually move to another more efficient manufacturing method when the volume is sufficient.

@nsboost

2 жыл бұрын

It’s a terrible business idea lol. Terrible terrible.

It's been a few years I want to start a 3D printing business knowing how profitable and interesting it could be. Thank you for that quality video that summarized it all and congratulation on the amount of views so far ;)

@AustenHartley

3 жыл бұрын

Hey thanks Alexis ! If you're thinking about it, and you like building stuff, I highly recommend it ! Cheers !

@DavidGarcia-nx2gj

3 жыл бұрын

I too highly recommend it! I started 4 months ago and I decided to prints molds and make things out of concrete and resin, I sell those and moulds made by plastic, and different types of sylicone with the models I print. That's a side job tho, I model, print and made some automated solid dispensers to make this a job not to spent too much time. I recommend to learn 3d modeling and basic stuff about electronics.

@AustenHartley

3 жыл бұрын

@@DavidGarcia-nx2gj Thats awesome ! Molds have been increasing in popularity and demand over the last few years for sure. Cheers David !

I’ve been working with 3d printing for about 4 months now and it is extremely time consuming to learn all the aspects of 3d printing. I’ve spent days in my garage upgrading leveling and just learning about the printer the settings the software such as slicers and I’ve recently started with tinker cad to creat my own designs. I want to start a business in 3D printing but I won’t do it until I’ve hit that one year mark of learning. Also would like to purchase another printer so I atleast have two. It’s a great hobby just takes patience and the want to learn. For now I might just start small and make things for people on the side for cheap. But looking forward to starting that business next year. Great video thanks so much for sharing 👍

@ddlc7022

2 жыл бұрын

It is good that you are learning about the printer, when you are done learning buy a Prusa, it is pretty much like plug and play

@freakface1234

2 жыл бұрын

Well I just found myself on the internet, holy hell LOL I'm in the same boat as you man, I'm trying to have fun with it and the moment I get frustrated, I just take a step back and try later. It's a crazy learning curve.

@DaveSmith-cp5kj

2 жыл бұрын

Quit tinkercad, download designspark. You can make much better objects and IMO it is easier to learn than Fusion 360. I really like the spaceclaim software even though it is technically less advanced than other options.

@digitalperson108

2 жыл бұрын

@@DaveSmith-cp5kj +1. Great software, been using it for 3 years now. VERY capable.

@jcoghill2

2 жыл бұрын

Check your local Community College for a class in Solidworks. It's almost an industry standard. You take all their Solidworks classes and you can get a high paying job out the door too. If that's what you want.

I am already skilled with Solidworks and actually love designing. So i might look into further learning 3D printing

@isaiahhiggins

2 жыл бұрын

Same, just ordered a Neptune 2

Great video bro, I’ve been doing 3D printing as a hobby for a while and I’m looking to turn it into a business. This video really helped.

@AustenHartley

2 жыл бұрын

Thank you man ! Glad it helped !!

@takeittothegrave6302

2 жыл бұрын

Hey Trey,Incase you looking for 3d designer ,hit me up I'll make the best

Hey man, just stumbled across your video! I have been thinking about this for years now without the courage to start. I am a mechanical and aerospace engineering graduate, disheartened by the engineering job market. This way I can design I build myself. Thanks to your video I may actually give it a shot finally! Thank you.

@AustenHartley

3 жыл бұрын

Hey man ! Absolutely do it !! If you're on the fence, get an Ender 3 from amazon for $200 ish bucks you can get started, try it out and see if you like it. You're probably familiar with Solidworks or a CAD variation, you could make that money back in a weekend. Cheers !

@Pr1tch4rd

3 жыл бұрын

@@AustenHartley Thanks man! I appreciate it. I'll be making a few appointments and comparing setups soon. The end goal is to operate in the way you do, offer my skills. Model and produce products or companies, prototypes, proof of concept models etc. I just have no idea how to market myself in that way from scratch. Any pointers for me? One more question, is it worth investing in Resin and FDM printing methods? I have the space to do so.

@AustenHartley

3 жыл бұрын

@@Pr1tch4rd Hey thanks man ! Absolutely! Honestly the best thing you can do is just get some service listings out there and see what people are interested in. It will depend on who you market to and what location you are in. The other way to do it, because it cost so little to make a 3D printed product, you could pick a product niche you like, make a couple products and see if they sell. For example, Store Signs - I had a few local companies ask me to 3D print their logos then started offering the service because there was demand for it. Once you start getting requests you will get a ton of ideas !

@bobbyrayofthefamilysmith24

3 жыл бұрын

I'm a design engineer in Aerospace. We use 3d printers at work and it's alot of fun. I've just decided to buy my own as well. Hoping to make some cash on the side.

the most important question to me is "Where do you get your jobs from?" making it is one thing, where does the clientele come from?

@erikiacopelli451

2 жыл бұрын

I highly doubt he will say as itll take away from him. Tho it would be awesome if he did say where to get them

@DarksealStudios

2 жыл бұрын

@@erikiacopelli451 then it's nothing but a click-bate title for me.

@hillfortherstudios2757

2 жыл бұрын

@@DarksealStudios I agree that he was intentionally vague to the point of uselessness. I have a business that is a 3d printing and design shop and how I would personally answer that question is similar to how I would tell any business owner to think"make the things that people need rather than make products you hope people will need". I understand that is vague too as there is a lot to that process but I just wanted to share that fundamental principle. Don't focus on the printing (as there are millions of people who can print something for somebody) but focus on creating value for somebody via the tool of 3D printing. What problem can you solve for a business with the item you create form them? I spend at least 80% of my time calling, e-mailing and meeting with people trying to find their needs. I hope this was at least marginally insightful for you.

@DarksealStudios

2 жыл бұрын

@@hillfortherstudios2757 thanks James, yeah... I focus my time in the making of the 3d item (selling the stl or obj) and have a 3d printer so it would be nice if the worlds would align. Oh well, back to making polygons.

@isaiahhiggins

2 жыл бұрын

etsy

Hey Austin, new Subscriber, thank you for sharing your knowledge.

Great video! I got into 3D printing after failing engineering. No I'm a 3D DESIGNING MACHINE!! Love it

The most important part of 3d printing that I have found is you need to genuinely want to take on the hobby. If you don't then it will just feel like work and endless headaches. If you do, its a great hobby that can potentially make money and you should absolutely try to do that.

I think i found out how to be stupid rich, Thanks for being part of Journey. I'm still in Mechanical Engineering School and your right, this is too new and too juicy not to take advantage of. But I think making a mold/cast is ultimately necessary to manufacture a product at scale.

Also be very careful if you have a full time job because once you start 3d printing and selling it will basically eat up all your free time. Great video! Very informative. Thanks!

Very well structured and informative video, thanks heaps bro!

Each printer is suitable for for a variety of tasks, it depends on how the product is designed, some are suited for FDM, some SLS and some SLA.

Great video! Almost everything you’ve stated is true when it comes to my 3D printing business. 1 year in about 1,500 prints down!!!

@AustenHartley

2 жыл бұрын

Amazing ! Congratulations on it !

@dextermorgan6665

2 жыл бұрын

Do your reckon you will make money off them?

@calebroberts1961

Жыл бұрын

Where do you mainly market your prints?

Freakin’ amazing, brother! I’m retired and you kept my attention ion from start to finish! Getting into the Etsy link to look into setting up an account!👍👍

@AustenHartley

2 жыл бұрын

Thank you Robert ! Etsy is amazing, still my #1. The link there should have everything you need to know !

Heh, learning curve. It has taken me about a month, I think I finally got my bed level. Or, this new filament is just amazingly sticky.. I got a really good calibration cube out of it though. :D

@TosinMusic

2 жыл бұрын

Hey which filament do you use and do you have an creality ender 3 pro

Really good vid brotha. I LOVE 3d printing and making 3d printers but I've never even considered doing it as a business until now. Also, consecutively is the wrong word there... Continuously may be what you were shooting for. In fact I think you may have misused it twice but I can't remember.. anyway, keep up the good work 🙃

good frank talk on how to start with 3d printing. i agree its a bunch of work that only a tinkerer would enjoy. thanks

Blender is a good design software too and the Cons were SPOT ON. I've had too many failed prints right at the end of the prints.

Nice video, followed a similar Ender > Prusa path. Have 6 mk3s with 12 more on the way

@AustenHartley

3 жыл бұрын

Amazing ! yeah I think its a good route ! I have tried a lot of combinations and just cant top the reliability and performance of Prusa for the price.

INVALUABLE INFORMATION FOR A TOTAL ROOKIE! THANK YOU FOR NOT JUST THE VIDEO, BUT THE WEALTH OF INFORMATION. INFORMATION, TIME AND MONEY.THE THREE MOST IMPORTANT VARIABLES IN ANY PROPOSITION. THANKS AGAIN!

@AustenHartley

3 жыл бұрын

Always ! Thank you for the kind words !

great sharing, thank you! I am more on the fence about getting a 3D printer or not... not sure what the competitive landscape is in 2022 (now)... anyway, super informative and practical views.

You've just enlightened me with the question "Should I start a 3D printing business". And I have all these things you mentioned here @ 13:44 in my heart.

Thanks for the info about starting. I am currently getting a printer to start a small business in Belize. There really isn't a market for 3d printers or the materials that go along with it.

My 3D printer will arrive tomorrow. Yes, I’m new to this but, it’s exactly what I expected. I’ve been working as a graphic designer, specifically in packaging, for decades and I worked as a sales person for Apple, for a few years. Other than just plain old technical technical and operational issues, there’s the customer aspect. So, like anything, part of it will be fun.

@1WiggerMan

Жыл бұрын

How is it going. Im very interested in this business

@privateprivate8366

Жыл бұрын

@@1WiggerMan apparently, I am not the person to ask.😆 Between dealing with horrific family issues and everything else, my FLSun Super Racer went into storage, without me even having an opportunity to open the box. Because there has seemed to be no closure to these issues I did, however, but a Silhouette Alta+. You may ask why the step down. It is not because I love it, even though I’m new to this. But, I figured out I would likely only be printing PLA, it fit on the edge of my desk, and it was enclosed. I have pets so, it’s a good temporary solution and escape to creativity, from my problems. As this just arrived, not too long ago, I have only printed 1 thing. You know when you buy a tabletop desk fan? There’s that center part that might have a logo? Been waiting to replace some stupid unclassy looking sticker, with a properly-sized dragon medallion. So, that was my test print and it turned out pretty good, especially for a first timer. I have other ideas, but am still figuring them out, as I slowly order filament. Not the answer you were looking for. But, that’s what it’s been. Most other 3D print people have way more production experience and stories to tell. I am, however, looking at the Bambu Labs X1C. Perhaps pricey as consumer/prosumer 3D printers costs, but thousands less than I spent on a brand new Apple Color Laser Writer, when Apple was producing printers. 😆 One of the major things stopping me is the amount of filament waste, however. But, I will not be printing resin, in my current living situation and, perhaps, never.

Just noticed this video was published on my 42nd birthday. Cool. I'm new to 3D printing (less then a month at this point), but I want to step in squash what was stated about 3D printing. I'm no expert but since I chose to go into resin printing, I've done a LOT of studying. And resin printing IS NOT just "mostly used for tiny, very small, interrogate, highly detailed projects". Just because my Elegoo Mars 2 has a small build area, it does not automatically equal small projects. Model print sizes are only limited by your skills (and amount of resin). For Example: I am working on a a series of custom figures of my own design. And the smallest is to be set at 12 inches in height alone. Larger then size of what my printer is capable of printing. I am modeling it to be assembled in post. I also have a design in the works for a custom helmet/mask of my character monk (see profile image). It's a undertaking to say the least. But because I'm using a resin printer, I can print the parts at a very small scale and easily test their assembly connections, with out sanding (or very little sanding). That is something I can't do with FDM printers. Not to knock FDM printers at all. But fine details and smooth surfaces are impossible without sanding. And if you want to fill in the layer stepping, you must sand and fill those areas. Another plus of resin printers (and please correct me if I'm wrong) is the ability to easily print wax molds for casting. I've yet to find anyone using a FDM printer for this. My point is that I don't believe there is anything that can be printed on a FDM printer, that can't be printed on a resin printer. I don't see that being said the other way around. At least not yet. Please don't misunderstand. I plan on getting a FDM printer for my less detailed projects. I even have FDM prints I've purchased off Etsy. Each type of print has their pluses and minuses. Just don't knock resin printing as a miniature creation phase. It's far from it. Resin printers have been around for 20+ years. It's just now cheap enough for the common customer.

@AustenHartley

2 жыл бұрын

"My point is that I don't believe there is anything that can be printed on a FDM printer, that can't be printed on a resin printer." This is not really true. Let me explain. It is about finding the best tool for the job. High resolution, large volume resin printers are still very expensive. It really does come down to size, then ease of use. If someone wanted a model bike made in 1:1 scale ( something we have made ). It's is not something that is feasible to do with resin. There are additional constraints that must be taken into account. Cost of resin, #of parts, shrinkage and compatibility, print time, time to prepare supports, failure percentage... to name a few. Additionally and potentially most important - Material limitations with resin printing.

Thanks man . You've been your tubes very informative

@AustenHartley

2 жыл бұрын

Thank you !

Thank you for this, has to be the best video out regarding this topic, very insightful. Ordered my Ender 3 pro two days ago and i honestly cant wait to get started. One question, I already have some experience with Blender, is this an okay software to use when it comes to printing? I know it works but I'm wondering if it's any major differences between Blender and the more used softwares, should i just get started learning one of them in the meantime? if so, which one do you recommend?

@AustenHartley

3 жыл бұрын

Hey Kevin, thanks for checking out the video ! And congrats on the new printer ! Same one I started with, great unit. When it comes to design software, if you already know how to use Blender, you're off to a great start. I would recommend checking out "Fusion 360". It's a pretty powerful design software with a free hobby license option. I use it for industrial and hobby applications and it is fantastic. I'm in the process of creating a series on how to use the software specifically for 3D printing but it is probably a month away from being complete, but you can find almost anything on youtube as well, and if you know Blender the learning curve wont be bad at all. Cheers ! Austen

The local print farms on Shopee (something like a Malaysian Amazon) charge RM 0.30 (about USD0.07) per gram.

Wow - such a great video. Do you have any mentors?

@mrwhosmynameagain

2 жыл бұрын

Likes your question.... Yet doesn't answer. What a guy!

OMG make those sound panels even...... My OCD is on fire looking at those. lol

@Eden_M

3 жыл бұрын

Sure, but his printers are busy, so do your boy a favour, print some spacers for him 😉

@TheRealMisterJ

2 жыл бұрын

I don't get it, look fine to me 😂

Hit the nail on the head. Great video!

I really liked this video liked the "scripted" type video so you hit us with all the need to know back to back.

@AustenHartley

3 жыл бұрын

Hey thanks Tony ! Trying to keep it clean and concise and always providing real examples. Cheers man !

I've been modeling in Blender for a year and a half and my friend just bought a 3D Printer. I really wanna start a business doing this. Thanks for the video. Now I just need to figure out what to make to sell haha.

@NikCasto

2 жыл бұрын

Do it! I'm considering the same thing, I just don't have any modeling experience unfortunately..

@treekotreeko3487

Жыл бұрын

​@@NikCasto how are you doing now

Great video, had my Vyper a few months, and still learning… my biggest frustration is supports, yes I try to avoid, but customers would expect perfect prints. I’ve never been able to sand/file/heat the residual stuck material to look like virgin print. How do you do this?

great video, thanks for the tips

Great video. I am currently learning CAD design and I was curious if I can make money designing and printing stuff at home.

I thought about resin printing but our craft room has no ventilation, so that was out of the question. So far enjoying our FDM printer

Generally for decent filament I'm spending between 25 and 40 USD equivalent. For CF nylon then it's potentially 2-3x that for 1KG.

@legionjames1822

2 жыл бұрын

I pay 190 for 800cc for cf nylon (onyx) from markforged. Probably like a pound and a half. But the quality and reliability of markforged 3d printers and products is absolutely top of the line. Kinda makes all this hacking away in cura pointless if I'm being honest.

@Nicksperiments

2 жыл бұрын

I pay $208 per kg for MakerBot Method CF Nylon

@legionjames1822

2 жыл бұрын

@@Nicksperiments that's chopped fiber nylon correct? Or is it some sort of carbon fiber nylon?

@Nicksperiments

2 жыл бұрын

@@legionjames1822 their data sheets don’t specify if it’s chopped or infused. It’s got really good mechanical properties but all the materials for that printer are extra expensive because each roll has a chip that tells the printer what material it is and how much is left

I prefer the sovol direct drive printers over creality.. it’s actually all the same components with a little bigger build volume, better tuning, and firmware / thermal runaway protection from the factory.

I just bought a brand new Ender 6 for under $100 at an auction. Can't wait to start making money.

The first time I hit "slice" and saw that 5 day print time, I had to put my head down

@Galaxy-456

2 жыл бұрын

LMAO I thought my 23 hour print times were bad, GL lol

@tristansimonin1376

2 жыл бұрын

Just change a few parameters and you can divide the time per two or three

@dungc6479

2 жыл бұрын

@@tristansimonin1376 Yeah you're right. I had to learn the hard way haha To any beginners out there, there's always a better way to do something so don't get discouraged if things seem to move too slow or aren't working out. Don't accept it unless it's as a challenge!

@tristansimonin1376

2 жыл бұрын

@Bryan White 0.1mm nozzle and 0.05 layer height work great to 😂😂

So glad I found this video today

This is definitely something I should start doing. I have used autocad and Solidworks at school. The thing I am a little naive about is how to source customers.

@AustenHartley

3 жыл бұрын

Hey Turbo, Access to a Solidworks License is awesome. Really powerful software and used in industry all the time. In terms of getting customers, it's definitely the hardest part, I recommend starting on you local classifieds, just post a 3D printing service ad, you'll get all kinds of requests and can test the waters. Thanks for checking out the video !

@turboduckhead6179

3 жыл бұрын

@@AustenHartley Is that the program you recommmend? I was looking at Fusion 360 very recently..

@AustenHartley

3 жыл бұрын

@@turboduckhead6179 Yeah by far the best free program. It has a hobby license !

@turboduckhead6179

3 жыл бұрын

@@AustenHartley I never realised the hobby license. I think Fusion was £430 a year

@AustenHartley

3 жыл бұрын

@@turboduckhead6179 Yeah the hobby license is a great option ! It should be free for a year ! (free for a year for all students as well)

I wanted to start making model railroad stuff from g scale too 15 Inch gauge live steam I can definitely see designs I made be something others might want especially if I had OSCO cast some of larger models in iron and steel

I like the idea of 3D printing as a service only because I am not good at design.

I'm learning 3D printing at school, although most of our printers are not realistically affordable and do all the pre-print work for you

Great video me an my son r newbie opened our GIDI Glod strip door Only did the test print Need to move forward Thanks

Great intro video, thank you.

Interesting and well presented, thanks for the information.

@AustenHartley

2 жыл бұрын

thank you !

Austen, I’m also a sculpture and I wanted to ask do you think I could 3d scanning my clay sculptures and print them? I’m thinking that would be a hell of a lot faster easier and cheaper than making molds and casting them…. Did that make sense I’m getting old lol

@AustenHartley

9 ай бұрын

Definitely possible! tough to say without seeing them definitely possible! I did a video on 3D scanning a couple weeks ago with the chair. You should check that one out for a rough idea!

Thanks all for checking out the video ! Received a few messages about the printers listed in the description so here is my order of recommendations and why. These are all based on my personal experience and all printers I have owned and put countless hours on. 1. Prusa Mk3S+ (Not available on amazon, I'm not an affiliate, check local stores or shop.prusa3d.com) Extremely reliable printer. The quality and speed are comparable to printers that are 10X the price. Downside - they are more expensive than the cheaper alternatives. 2. Ender 3 V3 - amzn.to/3bWSiCR I think this should be everyones first 3D printer. This was the first printer I ever had, and I STILL have 3 of them. For under $300 the quality and ease of use of this machine is amazing. Great for learning. 3. Cr10 V3 - amzn.to/3qW6DDX I think of this printer as basically a larger version of the Ender 3. A lot of people want to print bigger items, and in my opinion this is the best large and affordable 3D printer.

@flyingbanana2436

3 жыл бұрын

I don't agree with the ender 3 pro. I use aliexpress prusas off aliexpress because they are literally the same. I have a genuine and knockoff. I also have a ender but it is bad unless you upgrade it alot

@AustenHartley

3 жыл бұрын

@@flyingbanana2436 I used a fleet of enders for my first 6 months and they worked great, just required more maintenance than the Prusas. Maybe you got a bad machine some how.

@flyingbanana2436

3 жыл бұрын

@@AustenHartley maybe. I just hate bed calibration. Also it has heat creep when printing petg. Also no such thing as a color change at a specific layer which I use alot for my etsy listings

@AustenHartley

3 жыл бұрын

@@flyingbanana2436 Yeah its great for PLA, definitely worth upgrading a few components if you're doing a ton of printing. But for like $200 its tough to argue haha

@TheNinjaDog2

3 жыл бұрын

@@flyingbanana2436 what's your etsy shop banana?

Yes, I see the splendor of it, Manufacturing and Distribution, A beautiful thing. Goodbye Scalper.

The gaps on your wall art is driving me nuts! Lol the content tho 👍

Thank you for making this video! I watched this when you uploaded it back on February and I got the motivation to start a 3D Printing business on Etsy and have made 20K so far!

@alicraft9542

2 жыл бұрын

What’s your Etsy link ?

@dennybaker6264

2 жыл бұрын

What's your link?

you seriously need more subscribers

Been 3D printing for a few years now. About to start selling models and halo helmets.

Hello I’m a retired defense engineer and I just purchased a 3d printer and 3d scanner and your video is very helpful

@AustenHartley

9 ай бұрын

Appreciate you!

i have 10 3d printers and i use etsy i make 4500 a month. i use ender 5. 5plus and ender 6

I've been trying to figure out how to start a 3D printing company as it would be a first in my town. I am a vet so I'm looking to do my own thing. the Fact i found this makes me extremely happy and hopeful thank you!

@calvinneill1908

2 жыл бұрын

But I thinking I'm going to start off with resign printing first****

Really interesting video! I personally am in this world since one year of actual printing(with a Ender 3 eventhoug I design from about 6 years), but I was wondering just one thing: what do you think of delta 3D printing? I had seen some of this printers at a comfortable price, like the flsun q5, but is it worth? Thanks in advance

@AustenHartley

2 жыл бұрын

I'm not a huge fan of them ! Just my opinion but I think the standard XYZ axis is a lot more reliable and from an assembly and manufacturing POV the delta printers dont seems like the best idea haha. I've only had 1 though, so i'm sure they have come a long way since.

I can see prop making a must for a 3-D printer.

i bought me an Ender-3 V2 a couple days who, cant wait for it to get here. No idea how to 3D print though.....

good video! what do you recommend other than Ender? assume FDM for final parts moving (e.g wheels, pulleys etc..)

@AustenHartley

2 жыл бұрын

The Prusa MK3S+ is the best overall printer I recommend ! It's linked in the description. If you have the budget for it, it is a fantastic option. We have lots of them running 24/7. Cheers !

Thanks for this great video. I build robots and do all the design work myself. I've been thinking about making 3D print kits and starting an online store (also STLs) so others can build my robots. I have about 15 years 3d printing experience. Do you think I need a brick-and-mortar store? I think my garage is too full for another project like this. BTW, you had me at $100k a year, but that needs to be consistent to make that work.

@AustenHartley

3 жыл бұрын

Hey Will ! Just checked out your channel, awesome stuff man, we might have to a collaborate on a project in the future ! I honestly don't think a brick and mortar is needed for most 3D print operations (if you have some space already available). Your shop looks pretty fantastic as it is. You could easily add a couple rows of shelving and put anywhere from 3 - 10 smaller printers on it without taking up much room (if you are planning on selling printed parts). Some of your projects definitely have larger parts and the bigger printers are nice to use, but if you're selling .stl files you will likely have to split them up to fit on the smaller machines anyways to keep customers happy. Nice Zbrush work btw. Cheers man !

@Will_Huff

3 жыл бұрын

@@AustenHartley Thanks very much for that information and feedback. The bartender robot is too massive of a project for most builders, but the robot heads are a good size and I have several "doable" smaller robots coming out this year that might be more assessable for folks to make. Just got the channel started in 2020 and man, hats off to everyone who can make traction so quickly on KZread...its a lot of work ! Lets keep in touch for future collab!

@AustenHartley

3 жыл бұрын

@@Will_Huff Any time ! Good luck with it, i'll be following ! And yeah congrats to you and your channel too, it looks fantastic. All the best !

@takeittothegrave6302

2 жыл бұрын

Hey will,Incase you need 3d design services,hit me up😜

Great video! I have some experience designing in Blender, can I use Blender as a software alternative to Fusion360 or SolidWorks to design 3d printing files?

Great video. I am just starting my printing business but have been 3D printing over 5 years now, the last few minuets of your video are absolutely spot on.

@vsupremeog4521

2 жыл бұрын

hey bob just wondering if things worked out ok

@bobpattenden

2 жыл бұрын

@@vsupremeog4521 Yes, it's going well. No more boss, no more 9 to 5 and spend the day doing something I enjoy.

@vsupremeog4521

2 жыл бұрын

@@bobpattenden thank you for your feed back bob, very inspiring 👍

Great video, I learnt a lot, pros & cons. I have a question for yes I like tinkering and pulling things apart etc ( I was repairing laptops until Covid reared its ugly head now that's gone) so with the tinkering aspect, I know nothingabout CAD but I'm sure I could learn, what do you recommend Another question for you is there a website that supplies lines of code for individual items ?

Been 3d printing for my workplaces for like 7 years now...i should buy one now lol

Literally making money seems like a dream for everybody! Imagine having your own personal mint

Thanks for the information! New sub here

@AustenHartley

3 жыл бұрын

Thanks for checking it out !

No, not a question, just an observation. I was waiting for you to mention 3D capture systems. A few models I looked at aren't terribly expensive and as they are tax deductible, a very good way of turning a real object into a virtual one ready for a bit of tweaking then printing but in less than half the time or better. Got to be preferable to sitting down and reinventing the wheel. In my crystal ball I see camera capture modelling becoming more and more common. Best to get in early, work up to a better/more expensive capture system and have it as one of your money making tools. Just got to be aware of copyright infringement is all. Good video Austen. I wish my printer made stuff as fast as you can talk 🙂

My wife makes arts and crafts and sells it as a vendor at fairs and events. Recently I started putting some of my 3d printed stuff out and in one day I profited little over $400. Kinda surprised about it.

@AustenHartley

2 жыл бұрын

Thats amazing and thanks for sharing ! Sounds like a fantastic opportunity with little competition.

@gabesampson

Жыл бұрын

What items did you exactly print

My CR10 is old but heavily modified because the original was not great. This will get better but expectations will also get higher. People expect a printed item to look molded and they just don't. People also expect them to be as strong as a molded part and usually it's not the case. TPU is strong but not ridged and pla is easy but tends to warp or lose strength....

Killed it on the video, Loooooaaaads of great information, EXCELLENT! Thank you for posting. I'm thinking about doing 3D printing on the side. I'm a mechanical engineer too and I have 2 3D printers that I use to sell parts that I design and make for cars on my website, but I have never considered offering 3D printing services. Not a bad idea....we'll see. I have 2 X1 Carbons by Bambu Lab....But if my business grows I can always order more.

Thank you for the inspiration

I couldn't think of a business with more unexpected problems than a 3D printing business. Imagine the stress haha

@AustenHartley

3 жыл бұрын

I was constantly problem solving 4-5 years ago. Now with all the free resources it really could not be more simple. Just takes the time and effort to learn as does any business.

Can you make a video on the design aspect of either Solid works or Fusion 360 and which you prefer? (Side Note - I don't sub to barely anyone, even youtubers I really like, but this guy deserves the sub, PLEASE keep making more videos, I am following closely!!!)

@AustenHartley

3 жыл бұрын

Hey Jared, I appreciate that so much ! I am actually currently working on a "Fusion 360 For 3D Printing" video series. Solidworks is definitely better for industrial design, structural analysis, simulation, stuff like that. However, when it comes to design for 3D printing I think Fusion 360 is just as good. There is also free licenses available, so I would definitely choose Fusion 360 for 99% of people. I use both daily and have Fusion set up entirely for 3D printing. Hope that helps ! I'll notify when the video series is done.

@jared6319

3 жыл бұрын

That's super helpful, I tried looking into solid works first, not knowing but getting your input is definitely appreciated since I really don't know what I'm doing, but want to learn to basics before the printer arrives, Thank you for explaining!

@AustenHartley

3 жыл бұрын

@@jared6319 Yeah definitely go with Fusion 360 ! And thats a great idea. Once you know the basics the rest comes pretty quick.

Great video very good info, I ended up returning that kind of 3d printer and going with anycubic photon 4k printer way better alot faster 16- 28mm minis on 1 plate took just over and hour also depends on size stone giant was 3hrs which is 104mm I really want to get into 3d printing full time tired of working for people with no appreciation lol... problem is I also play dnd so I want all the minis lol.... Again great info amazing!

I wish i could use my hobbie in this means. I gotta longer lk4. Its an Ender killer. Prints pla like a charm. Prints abs good, and petg very well. Im good with tinkercad, learning blender and designspark mechanical. I only wish i had a few more, at least one with a 300mm build plate. Lk5 is my next printer investment.

@AustenHartley

3 жыл бұрын

Awesome ! If you can do a little design and make quality prints you're off to a really good start. Good luck !

@TheJacklwilliams

3 жыл бұрын

I'm such a noob I should not be making recommendations. However, after a couple months research in 2020, in Nov I bought an Anet A8 plus. I got the kit, it was a monster to build but sure taught me a lot. The build area is 300x300x350. The construction is all extruded aluminum and frankly as a first printer, pretty damn amazing. Take a look, you might like it. Now, I want to apply some upgrades this year. Namely auto bed level, and extruder / hot end upgrade however, i'm not upgrading anything until I'm certain I've learned enough and dialed in what I have to the max. So far, I'm damn impressed considering the price/value.

I am helping my mom to be able to invest in learning this. She is a great artist in her 50s, so I kinda need reasons why and how I can convince her? I do not know much about 3D printing either, but as an engineer sometimes I really want to try making one

How do you stop scratching toward end of the print . And what is your best print speed setting.

Great video! I just got an ender and I was just wondering if there is a website for printing other peoples designs for them? Thanks.

@AustenHartley

3 жыл бұрын

Hey Dakota ! I'm not 100% sure what you mean ! If you are referring to a place where you can print someones files and charge for that, there unfortunately isn't any good options that I know of. Most places like that require you to have a large shop and designated business. If you just got your ender - I recommend starting out by posting a couple of listings in your local classifieds or on facebook marketplace !

I just discovered that you also own onewheel, do you 3D print your own accessories? I’m thinking of using solidworks and a 3D printer to make the charger plug and fender, but I’m only started with a thought, haven’t have a chance to do anything yet

I am going to order a prusa mini to start. Being an industrial designer and having used 3D printers through out my career I decided it’s high time I got my own. I do want to make a few bucks with it. Small stuff nothing too crazy. I would like the machine to pay for itself. Then I would like to make 1-200 per month on top of that. Then see how it goes and scale it up a bit. Not to mention make my own things to simply further my career.thanks for the helpful video.

@AustenHartley

2 жыл бұрын

Love it ! The Prusa Mini is a fantastic starting point.

Fantastic, thanks for the insight ! What material do you typically use for your projects ?

@AustenHartley

3 жыл бұрын

PETG or ABS for most functional parts, and PLA for prototyping or parts that are not subject to any heat !

i have heard another good printer to start out with is a Anycubic Vyper thought it is a little bit more expensive it has a lot of upgrades already there that the ender-3 does not already have

I think itll be a fun hobby, but itd be nice to progress from there. i may go so far as to take some courses in engineering.

Anyway we can get a link to that resin heart model you featured in the beginning 2 minutes?