3D Printed X-mas Gifts that don't suck!
Ғылым және технология
3D Printed Christmas Gifts that don't suck!
Prusa Mini+ ➜ shop.prusa3d.com/en/#a_aid=Un...
Creality Ender 3 ➜ geni.us/BjRmN6A
Silk PLA ➜ geni.us/Qsqug
Zyltech PLA ➜ 15% off with code UncleJessy!
www.zyltech.com/pla/?aff=7
Quick Links
0:00 Intro to non sucky 3D Printable gifts
0:50 Lithophanes ➜ itslitho.com/
1:33 Among Us Crew by WalRit
www.thingiverse.com/thing:466...
2:37 Mandalorian Figures by iczfirz
www.myminifactory.com/object/...
3:24 Collapsing Lightsaber by 3DPrintingWorld
www.thingiverse.com/thing:360...
4:02 3D Maze Puzzle Box by ProductDesignOnline Remixed by Ben.Drexl
thangs.com/model/9173
5:07 Tippi Tree by MakeAnything
www.myminifactory.com/object/...
6:02 PowerMoon by ChaosCoreTech
/ posts
thangs.com/model/9207
________________________________________________
Interested in getting a 3D Printer? Here are some that I use ➜
Ender 3 v2
geni.us/ELoByIG
CR-10
geni.us/4YP8
CR-10 S4
geni.us/5PNnAI
TinyMachines3D.com
www.tinymachines3d.com/?rfsn=...
________________________________________________
My PATREON ➜ / unclejessy
Buy Me a Coffee ➜ www.buymeacoffee.com/UncleJessy
_______________________________________________
Gear I'm Using ➜ www.amazon.com/shop/unclejessy
________________________________________________
Twitter ➜ / unclejessy4real
Instagram ➜ / unclejessy4real
Facebook ➜ / unclejessy4real
KZread ➜ / unclejessy
________________________________________________
Music provided by Argofox:
NEREUS - Lotus
• NEREUS - Lotus [Argofo...
Thanks for watching!
SEND STUFF TO ➜
Uncle Jessy
PO BOX 629
25 Goodburlet RD
Henrietta, NY 14467
#3DPrinting #GiftIdeas #PrusaMini
Пікірлер: 125
My wife has, believe it or not, become the opposite! At first, she thought it was worthless and a total waste of time and money. Now, she hits me up at least once a week with new things to print. 🤣
@noway8233
2 жыл бұрын
Yeah, its like an adiction
@omarrc4
2 жыл бұрын
X2
@Davkakra1990
Жыл бұрын
dito
I made 3d printed gift tags for my presents this year, and printed one of those "Our First Pandemic" Christmas tree bauble designs for my uncle's family, since they traditionally have a big xmas tree. All were well received. Also sent a printed bookmark in a Christmas card to a friend of mine.
The puzzle cylinder was a great last minute print. Definitely one to keep around for when needed. Thanks!
If my spouse spent time designing and printing something for me on a 3D Printer, you better bet I'm going to love it, and I do...
I put a cheap LED flashlight in the collapsible lightsaber.
My wife feels the same way about 3d printed gifts lolol. Wasnt a good valentine's day!
@UncleJessy
3 жыл бұрын
hahaha been right there with you. A lough we still have a 3D Printed Red Love sign thing i printed a few years back in our bedroom
Keep up the great content Uncle Jessy! Just got my first printer, but I've been watching your videos for years now and really excited to go back through them again now that I can print props!
@UncleJessy
3 жыл бұрын
Huge congrats! Yer gonna love it. For sure a learning experience with any machine and the more you print the better you get at refining settings etc
Glad to see you showing off the Prusa Mini!
nice to see my models featured here
@UncleJessy
3 жыл бұрын
Fantastic work on those files!
Amazing video Uncle Jessy. You gave me some other idea. Merry Christmas to you and YOUR Family
@UncleJessy
3 жыл бұрын
Merry X-Mas to you and yours as well!
The 3D Maze box was PERFECT for my daughter's gift certificates. :-) I ended up printing 2 for the 2 she got from her grandparents. :-) My wife did get a 3D Printed gift. The Aladdin's Lamp from Nikko Industries. It looks REALLY good. I'll paint it and make it look great. She's been looking for a nice Aladdin's lamp for her Disney Movie collection of nick knacks. :-) She was really happy about it. But, I don't print her a lot of things.
Thanks jessy for this video I now know some cool things to print now
Custom 3d prints with electric components, or even a build it yourself set like steam punk mechanical stuff
If you know anyone that eats oui yogurt often, making them lids for the glass containers that comes in could be a cool gift. Especially if they are fans of containers (like many people are). Ice seen several designs out there on various sites for them.
@UncleJessy
3 жыл бұрын
Fantastic Idea!
I thought up the perfect Christmas gifts to print for my family and friends... and then proceeded to screw up the settings on my 3D printer before I could get to printing to them, turning those into "belated Christmas gifts" instead. I totally forgot about the collapsible lightsaber model, though, I think I know someone who'd love one of those... myself!
Those mandalorian look so clean! What settings did you use?
Another great video Grandpa Jessy
Great ideas/designs ☺️ Thanks for sharing 👍☺️
My wife loves personal gifts designed her a phone stand. She loves it
Merry Christmas and happy new year my friend
Looks sick! Thumbs up for quality!
Great video Jessy, like the Starwars things...
I made Marvel-themed fairylights out of clear resin as a gift and the recipient loved them :D
@UncleJessy
3 жыл бұрын
Oh wow! Now that idea sounds amazing
I ended up printing some Christmas miniatures and handpainting them for coworkers! They loved the results. If I end up getting a prusa or elegoo Saturn, I'll definitely print bigger minis and what I've seen in this video. Have a wonderful holiday J! The specific mini I'm gifting my coworkers and friends is a Christmas shroomie, free off of myminifactory.
@UncleJessy
3 жыл бұрын
Minis are great gift ideas as well especially if you're painting them! Nicely done!
Card kit models are also cool gifts.
I'm sure the adult male that is showing off all his action hero memorabilia behind him has a lot of good stuff to say
LITHOTHANE CHRISMAS BAUBALLS SAVED MY BACON LAST YEAR
Happy holidays man
@UncleJessy
3 жыл бұрын
Thanks you as well! Almost through 2020🙃
@joetoeforsho
3 жыл бұрын
I appreciate the reply made my day
Tippi Tree is so fun! Bought the files the first day of the drop!
@UncleJessy
3 жыл бұрын
Such an awesome set of files! Cant wait to play it with my boys. Going to start printing another set of leaves
Printed gifts for your significant other is entirely dependent on what you're giving. I spent the month leading up to my partners birthday making pokeballs and several multi color pokemon, and she freaking loved it.
Hey man, thank you for your videos, which 3d printer and material would you recommend me for a first time if i wanna have it in an apartment without much ventilation if i wanted to make minis and stuff related?
Uncle Jessy. I had a thought. So when you IPA gets dirty from cleaning your resin. Or what ever cleaning agent you use. I have not tried this, but I think I will. Have you ever tried running your left over solution into a portable water filter? Just wondering if you can not only clean your IPA(insert your solution here), but reclaim your solution?
It's really hard to find STL's that people will receive as something more than just a hung of monochrome plastic. This year I'm making custom lithophones, articulated Sheron dragons, egg shaped dragon boxes with screw on lids, and Minecraft earth block boxes with a removable grass lid.
would the Prusa Mini be a good choice for printing item for cosplay like a helmet and or armor? Or is the MK3S+ a better choice? for me the Mini is more in my budget range, and I am also a beginner at 3D printing any help will be much appreciated please and thank you.
To be honest i think the most basic thing is would be awesome gift to because you worked on it did it yourself and made just for him/her by you and that makes it better then buying it in a shop or downloading a file. That saber still awesome. I will get one if i have another filament
HAHAHAHA wonderful idea about the maze!!! Brilliant hahhahahahaa
@UncleJessy
3 жыл бұрын
They are my go to gift for teens.
Do you have the settings you used for any of these prints or a video to help with settings? I just got a mega zero 2.0 and having a hard time understanding the settings using ultimaker cura. You have real Smooth prints with barely noticeable print lines. 🙏🏻
Analysts estimate that a PLA bottle could take anywhere from 100 to 1,000 years to decompose in a landfill. Another issue with PLA is that, because it is of different origin than regular plastic, it must be kept separate when recycled, lest it contaminate the recycling stream.
>3d printed Christmas gifts that don't suck >Has among us in the thumbnail
Enjoy your vids. Just got my first printer last week, a longer lk1. It's been a serious learning curve and took a ton of tinkering to get it to start printing decent. I've found that it prints best around at speeds around 35. Is that normal?
@Evakron
2 жыл бұрын
That's on the slower side, but not too far off average for typical materials like PLA or PETG. You might be able to go faster by spending some time calibrating other printer settings like acceleration, retraction, e-stepping, flow etc.
I feel like 3D printing can fall into the DIY arena depending upon someone's fabrication skills. For instance, these all still have layer lines. It is like using a new lathe to make someone a wooden bowel that has bit marks. You have to really think about the details. Does finish matter? Can you fabricate something as good or better than what you could buy? Are you 3D printing gifts purely for the purpose of 3D printing? The thought is what matters, and putting more time and money into something inferior to commercial alternatives just because you wanted to print something would not leave a good taste in someone's mouth.
I don't own a 3d printer yet but I'm interested in one. Was looking at phrozon transform. What do you think you obviously know alot about this machines.
How on earth can you get that Mandalorian to print in 4-6 hours, my Ender 3 is saying 18 hours at 0.12mm? What settings did you use Jessy?
@franciscocataldo9238
3 жыл бұрын
maybe he used thicker shells and less filling
Tippi Tree!!!! so much fun
Kids love 3D prints
not me watching this loooong before Christmas just in case
please share your settings for the lightsaber, them jokers are not east to print, even if the test print was perfect.
Yea, for me the best gift for every ocasion is always cash :D
I have the neptune 3 max. Can you help me with the settings to print figures faster? Pls. I printed 3 pieces about 4 inches big and took 15 hours. Lol.
Sadly the Among us figures are no longer available on Thingiverse :(
Unless you print a dragon that can be posed and your wife (and friends) are into dragons.
@UncleJessy
3 жыл бұрын
Dragons for the win!
@hatenull
3 жыл бұрын
I tried that. Putting my wife's face on the dragon was a regrettable decision.
I just got an Ender 3, what do you use for slicing and what settings to get such clean prints? Mine seem like they’re missing parts of layers, have some odd bumps here and there and stringing (stringing mostly fixed by cues but print times oddly drastically increase)
@ITheTryHardI
2 жыл бұрын
Cura*
4:33 that’s what I did with my puzzle as well, just yank it open.
How are you printing this stuff so quickly?
what r your settings been struggling with getting good results on the ender 3
Would have been pretty easy to add some lights to the eyes of that power moon. Would also make a decent followup video ... 😏 Just sayin'. 🎅
My significant other loves 3D printed things.
Gift idea: 3D printed vase, a load of sand to weigh it down and add artificial flowers.
so a print for my mother of the keg tree would be a *bad* idea
I designed a deck box for my friends for yu-gi-oh with a magnetic door and tray for cards and dice
@user-vl8ck4gz6w
3 жыл бұрын
Awesome would love to see it! A friend of mine made some dueldisks from the show and they have to be most acccurate disks I have ever seen. Better thanthe proplicas
the mando statues look like they would need supports
Whats the printer used in this video?
I just hand over my failed prints to my significant other and he loves fiddling with them!
How long acrylic paint lasts on 3d printed pla material?
@Tugboat3dP
Жыл бұрын
With sanding it can last a pretty long time sorry I am almost 2 years late 😅
Hey Uncle Jessy I been watching you for a while I just wondering if you know anyone who has tested the MALYAN SLA LCD Resin 3D Printer High Resolution Auto Leveling Wi-Fi Support 4K Resolution LCD Touch Monochrome Curing Screen All Metal Frame Parallel Led Black Larger Printing Size 192x120x230mm. It is a mid size resin printer that seems to have a self filling resin tank. I would really love to see you test it and tell us what you think. Or send a link to anyone else who has may be tested it. I was thinking about buying one and I would really like to see how this thing performs before I spend the money. Thank you and love you videos.
I guess I lucked out I printed out a character from Zelda and my SO loves it.
@mrexpendable1232
3 жыл бұрын
what character?
@harrowedwrath1172
3 жыл бұрын
@@mrexpendable1232 the baby guardian
@mrexpendable1232
3 жыл бұрын
@@harrowedwrath1172 oh nice glad they loved it
If your S/O doesn't like gifts made from your hobby that's kind of idk an ick feeling
Jessy just curious but are you a texan?
You look like kevins dad from home alone 😂
Considering printing off that mandalorian so I can paint it. I'm a miniature painter BTW
Dude, the paint on the powermoon was just too sloppy.... ROFL The kid was probably over the moon right!
Man sounds like Andy from The Office
A bit of paint and they will never know it's printed.
Hey! Where are your Grogu prints!? (no, he is NOT 'baby Yoda')
Wait, the mandalorian figure cape printed without supports?
@Mr_Yod
3 жыл бұрын
It's attached to the legs and it doesn't have great overhangs.
I took it a step further with my brother. He wanted a gift card. So I entombed it entirely inside a print. I look forward to him smashing it open. And my girlfriend loves when I print stuff for her. But then again that's mostly props for her cosplay.
0:03 me sweating nervously wait never mind it’s because i live in Florida
Is this the gun metal pla guy from zyltech?
@UncleJessy
3 жыл бұрын
🤘😬
@redherring5532
3 жыл бұрын
@@UncleJessy that filament is legendary dude
the thingiverse links are dead!
Pt 2
4:14 i started realizing this when i started to become a teen everyone just got me cash Which isn’t bad its just disappointing and a reminder that I’m not a kid anymore ok teenagers are still kids but you get what i mean I’m 16 but i still like toys and stuff animals I don’t play with them much anymore but there still important ok sorry the money lock. Puzzle is cool
#1 sucks. As does #2…. And the only cool thing here is the expand-o-sword.
Can you do it again in 2021
Tippi tipmas
I'm printing a harry potter chess set from thingiverse for my niece who is nuts about harry potter
@UncleJessy
3 жыл бұрын
Oh that sounds like a great print idea!
ender 3 print profile
Ball fart
I like turtles 🐢
that gifts still sucks)
a lil late lol
@UncleJessy
3 жыл бұрын
Not at all. Almost all of these can be printed in 1 day ;) Last minute print gift ideas
@vmiget01
3 жыл бұрын
@@UncleJessy would have been nice a week or two ago. Because i had to ship out all my presents this year due to you know what
I am kind of upset, EVERY video for 3d printing - ohhh wife doesn't like, doesn't approve, annoyed... I am a wife, and I bought a 3d printer as a present to my hubby, I see your videos, I get into it and I want more 3d printers :) And I am not alone! So stop this male "oh my wife is not cool with it" nonsense. Enough
I am somewhat annoyed by anything related to Among Us right now. Yes, it is a good game but the only reason everyone is playing it and referencing it is for the clout.
I so badly want to justify owning a printer but 99% of the things people print looks like it came out of one of those 25 cent vending machines next to the gum ball machines. Would you honestly buy any of that crap outright? No.