I don't know how I got here, but I'm glad I did. This sounds sooooo good!

Nice work my friend. From the sound of taking off and then really getting in it. This is exactly how I want my truck to run and sound. Definitely my inspiration to swap my auto to a manual.

Thank you sir, I'm glad to see someone running a good ole manual these days, seems like they have been forgotten.

@rylanmitchell8123

2 жыл бұрын

I'm swapping out my 350 manual for a 500hp 383 this spring 😁

Sounds pretty healthy and seems to move that truck pretty well. Nice truck!

Motor is a 383ci small block, 10.5:1 compression and roller cam. Mufflers are 3" in/out

@jjlawrence4918

3 жыл бұрын

What gauges you have

Excellent piece of work! 4 speed to boot! Take good care of her and be mighty proud.

Great idea for my 82. Love it. Awesome ride!

I just love the sound of it u shift from gear to gear

Good grief your truck sounds like a freaking monster!!!! Damn thats badass!

dude, i like it. sounds really good banging through the gears.

Damn that sounds awesome

wow, that thing sounds phenomenal!

Oh man she sounds beautiful. Good job dude :)

That sounds familiar!!!!! Awesome truck man ! Got to have a 4 speed !!

quit pulling the stick before you shift..those shift forks and sliding clutches​ are cussing you every time you do that

@newtcollins_21motocross3

6 жыл бұрын

Springfieldm14 308winchester j

@johnnywrench9669

5 жыл бұрын

Ahhhhh I see that Probably never opened a 4 speed ...what fork the spoon no the steak knife.

that was fucken sick .

The shifter location is actually quite a bit further back than the sm465, it's right in front of the bench. With the bench all the way back and the shifter in 4th gear I have an inch of clearance between the shifter/seat. The shifter I used is a hurst competition with a 55-57 passenger car stick.

damn i can't wait to get mine next year. im getting a 383 stroker for my 97 from the local GM dealership, they are gonna tune the ecu so i can run my factory injection, with the pressure increased.

Sounds good!

sounds good!

@sweenilizer Thanks! The cam specs are 232/238 .544"/.555" 110lsa 106icl

thank you sir, I now have a new favorite video!!!

se nota q esta muy buena la camioneta,no se ve casi nada pero al ver el cambio d marchas y el volante se nota q no tiene olguras,el sonido espectacular y muestra q es una nena con mucho caracter,podrias poner un video q se viera completa y tambien el motor,un saludo y a disfrutarla.

nice to see this again :)

damnnn...sounds awesome

love the sound

hey man , I know Ive most likely commented on your I cant say just how much I absolutely love your interior , I know its mostly stock but so classy Ive got an 84 c10 lwb that Ive been waiting to drag out of a field its in good shape but i need to get it moved soon and get on it I want to have a 379 sbc or a 383 with the muncie and make it low and cheap flat black focus on interior motor trans and a 9 inch with discs around

Yes the same clutch and linkage can be used, but you'll need to either change to a car bell housing or have an adapter ring made for your truck bell housing. The input bearing retainer on truck transmissions is a larger diameter than car transmissions, so the hole in the truck bell is too big for the car trans.

Glad to see some using 4speed than an automatic.I got a 81 swb chevy also.Got lucky bought a saginaw 4 speed off a friend for 100.collecting parts is no problem its the time and money.Only thing i really need to save up on is for a engine.

I love the shorts man. Was that IZOD 1988?

amazing!!!!

@jmm98ls1 awesome. wish i still had my 81 sierra. built 350 with a turbo 350 with a stage 2 shift kit it would outrun almost anything.

How did you get that M21 to fit in there? The shifter looks to be in the same position as the SM465. I've seen adapters for them, but they're about $400+ to make it work with a bench.

Nice truck man. I'm glad to see it's not auto.

@jmm98ls1 how did you linkage and pedals work ? what did ya use. im gonna put one in my truck just wanna have an idea

I like the blazer rear bumper

I know it’s been awhile but I’m wanting to put in a Saginaw in my 84 c10 but I just want to know if you had to get a custom drive shaft and transmission mount? Right now I have a sm465 and I want to swap for a 4 speed

awsum. i put 4:10s in my short box with a turbo 350. i have a 4 speed saggi im thinkin about swapin in it. be kinda fun to bang out gears in it

Did you use the stock clutch linkage for the m21?

musica para mis oidos. saludos.

hay man thats a sweet truck u got. what kind of gears are u runnin out back?

Hey were you shifting without the clutch?

sweet sleeper look.

sounds like my farm truck ha ha :D i got a sm465 and a 5.13 rear end though and a 366 big block and custom race tuned exhaust 2 and 3/4 inch exhaust and 40 series flow masters with turn downs right before the rear axle the truck will cruse nicely at 70mph turning around 4,000rpm :D 18mpg highway 14 city

I need to convert my 1985 C10 into a stick shift. Looks way more fun to drive!!!

I'm running a four speed (three speed with a low gear) but the ratio friggen sucks. I'm looking around for an M21 and was wondering if your we're able to run the same clutch, linkages, etc.? If so I'll be swapping transmissions this spring

I just picked a hurst stick from summit that looked like it would work with the bench seat. I think it ended up being for a 55-57 chevy passenger car.

Pretty much any small block chevy will interchange. A 383 is nothing more than a 350 bored .030 over and a 400 crank and rods. If you truck has a 350, it could have a 305, then you could build a 383 from what you already have. Best bet would be to look into a 383 crate motor to drop in, and yes, it will bolt right in

piss off man! Its a badass truck!

id love to see a 6speed manual put into a square body 73-87 chevy pickup

Rock crusher

Great, what model transmission uses?

Is that a low transmission hump or a high hump? I'm thinking about an auto to manual swap in my '85 and I'm hoping I don't have to cut the floor up. BTW, nice truck. I'll use it for inspiration for my project.

Transmission was violent af during shifts...

I love your truck! I have a 84 i'm trying to restore can't wait until its' done. What size lift does it have?

@350AmericanMuscle I shift it at 6000rpm, starts making strong torque about 2200rpm. Peak tq is around 4000rpm

sweet shorts

nice truck bro... about the flowmasters, u r using super 44 right? and r u just using 1 or 2 of the actual flowmasters? thanks

what exhaust set up are you running under it?

What brand of cam is that its awesome

Nice truck man! Im thinking about building a 383 for my daily driver do you think these motors are reliable?

thats a sharp truck what size motor you got in it

can someone tell me more about this trans ? whats the speed for every shift ? and how fast can the 4th go?

My trucks got a 4 speed, but its the granny low type. Don't shift that fast. Got a 383 stroker being built as we speak

What transmission are you running in that

@Morin945 Exhaust is 3" duals with two super 44's dumped under the bed.

Where did you get the parts to build it? I have a 383 stroker that needs rebuilt, its got a 355 in it at the moment.

It's a 16" hurst stick

It's a 2wd low hump cab, only cutting required is a hole for the shifter.

Can you put a standard gasoline in a 383 stroker I’m getting ready to do a overhaul on my RV and I was thinking about putting in a 383 from Jegs

Exhaust is longtube headers into 3" duals with flowmaster super 44 mufflers

@ThePeninsulaRailfan

3 жыл бұрын

Awesome

What's transmission are you running?

I read in the comments that you switched out the Muncie for a t56.... how much modification did you need to do to fit the t56?

@jmm98ls1

5 жыл бұрын

Had to make the trans tunnel a little taller, and I had to convert the t56 shifter location to the middle of the case where the shift interlock plate is. I had a guy make me a custom shifter for that location. Also had to use an adapter plate to made the t56 to the gen 1 bellhousing, moved the crossmember back, and shortened the drive shaft. That's it I think!

@ShepperdW obivisouly if you own a truck im sure u aint really worried bout the gas prices, trucks are needed regardless of gas prices, u cant shove a 4 cyclinder in a full size truck it wouldnt have enough torque or power to pull it.

when you put in your 383 did you change your rear differential?? I'm thinking about buying an 86 c 10 and swapping a 383 in but most the guys i talked to said they had to change the rear differential because the right tire would peel but the left wouldn't. just wondering if you've had any troubles with yours man. bad ass truck dude!

@jmm98ls1

10 жыл бұрын

I swapped in an Auburn posi differential and 4.11 gears, but it's still the original 10 bolt rear axle. Works great!

@patrickdionne9083

9 жыл бұрын

I got an 83 c10 with 305 with a 4 speed an factory differential and ita still got enough power to light both tires up

great work! I have a chevy 81 long bed in project with muncie m20 transmission and v8 5.7... how tall is that shifter stick???

Very very nice

What cam was in that 383

@rockstardrinker95 I had to cut the instrument cluster and the metal dash behind it to fit the single din stereo in there. Looks pretty good but not perfect. If I had it to do over again I'd hide it in the glovebox with a remote and keep the factory 2 post radio in the dash.

This sounds crazy, but is it me or does this truck sound like the car in the half life 2 pc game..

@deansettimi4570

6 жыл бұрын

omg i had that thought in mind

@benmiller3280

6 жыл бұрын

Thats so weird, i was thinking that as it was idling.

@WiNgZfinesse

5 жыл бұрын

Agreed

@WiNgZfinesse

5 жыл бұрын

Sounds just like the jalopy in hl2

sweet ride man, what year?

@ShepperdW its a truck, u dont expect to get good gas mileage regardless of it being $4 a gallon or $1 a gallon, its gonna suck gas regardless

Was the last part filmed from your mailbox lol

hey good buddy love the truck but i just wanted to let you know that 1972 called and they want their damn shorts back

@TheCoby420 I used mechanical linkage and pedals from a 73-84 truck that was a sm465 manual from the factory.

@beanrider7747

4 жыл бұрын

jmm98ls1 was that transmission rebuilt? Cause my sm465 is no where close to having those close gear ratios plus it’s a granny

@TheCoby420 I reused the original cross member and just drilled new holes on the frame. I used a stock 1 piece drive shaft and shortened it.

@david068513 Nope it was a factory 305/700r4 truck.....I swapped in the muncie. You could get the sm465 (3spd with granny 1st gear) from the factory in all the 73-87 trucks, but a car type trans was never available to my knowledge.

👍🏼

what truck is this? i have a 87 silverado looks very similar

3" duals with super 44 flowmasters dumped under the bed

Matter of fact it was!!! :)

mmmmmm oh that m22 whine :)

lol thought so,hey it works

what did you do to fit that new radio in there?,i wanna put a sick audio system in my 86 c10 with a built-up 350, bored to a 355 with ton of extra's,watch my vid, she a beastt

What kind of transmission u got

👌🏽

Dear Sir, where did you get those gauges in your truck?

@hallowedreaper7476

7 жыл бұрын

eddie smith I would also like to know haha

@kurtislouth231

7 жыл бұрын

eddie smith advance autozone napa orallies. they all carry them jeggs makes them as well

@jmm98ls1 thanks for replyin, appreciate it

Which length stick was used

what cam? and exhaust