You are so helpful wish you luck ❤😊

@PeterEvansArt

28 күн бұрын

Thank you kindly, glad it helped. 😀

Thanks

@PeterEvansArt

12 күн бұрын

👍

Very good instructions thankyou. Ive subscribed

@PeterEvansArt

15 күн бұрын

Thanks for the sub! Glad it helped you. 😀

great work 👍

@PeterEvansArt

3 ай бұрын

Thank you. 😀

Thank you very much.

@PeterEvansArt

Ай бұрын

You’re welcome. Hope it helps you. 👍

How much does it sold bottle refiller

Sweet, thx! Been refilling mine for a while now but still came away with a few good tips. And the measuring of the content was very interesting too. A lot less ink in these than one might think... Do you know if it's possible to refill the PC-1MR as well? Haven't tried to open them yet but the tip isn't threaded like these, but press-fitted,waaay in there.

@PeterEvansArt

4 ай бұрын

Glad you got a few tips from the video. I'm not a fan of the PC-1MR but you can get the lid off by using a thin palette knife or butter knife. Put pressure between the colour bit and the black part and pry off. Pliers are no good as it squashes the tips. Not ideal but that's how I have done it in the past. I was surprised by the ink levels in the Posca markers. Not very sustainable that's why I refill them. Cheers for the comment and feedback 👍🏻😀

@PeterEvansArt

Ай бұрын

I just uploaded a video about How to Refill the Posca PC-1MR. It turns out that small pliers are the best way. Check out the video as it is a tricky process but well worth it to hang onto those empty markers. 😀

@vesslades

Ай бұрын

@@PeterEvansArt Whoa, thanks! Awesome that you remembered me asking :D

@PeterEvansArt

Ай бұрын

@@vesslades you’re welcome. Hope it helps.

What do you think about filling them with Golden High Flow Acrylics? I wonder if the strokes will look too transparent.

@PeterEvansArt

Ай бұрын

Hey. You could try with one marker. Worth a try as if it doesn’t work you could always empty it out and clean it up. I have tried with a flow acrylic but had to use some liquifying medium and water. Just found ink was easier.

Plz make a video of what to do when your POSCA tip goes in plz I need it

@PeterEvansArt

2 ай бұрын

Hi Ariana, Is it dried up and stuck in or worn out?

Hey mate where did you get the molotow refills from and how much are they? Cheers

@PeterEvansArt

20 күн бұрын

Hey mate. I got mine ages ago from my Art supplier who no longer sells it. I was thinking of either Amazon or I have looked online at Jacksons Art Supplies who’s in UK. I’m in Australia and no real suppliers here so might try that. I have been using Amsterdam ink recently with success but a bit expensive. Hope that helps.

@TRENT698-

20 күн бұрын

@@PeterEvansArt No worries cheers Peter.

Just few questions... If I had no pliers or im not allowed to use them what is another way to unscrew the top? And what if I have no acrilic paint/ink to refill? What else can I use to refill it?

@PeterEvansArt

Ай бұрын

It would be difficult to get the cap / top off without pliers, clamp or some other gripping device so you can unscrew. Once you get it off once if you don’t over tighten you could just undo with fingers like i do. You really need ink/ paint to refill. You can add a bit if water to get a bit of extra life but it dilutes the colour.

@eshanclydecordillon3313

Ай бұрын

Thanks for the help 😊

❤❤❤

@PeterEvansArt

6 ай бұрын

Thanks. Hope it helped you.

@Bloody-rq5uz

6 ай бұрын

Thank you I love you

@Bloody-rq5uz

6 ай бұрын

Keep going, legend

Hi Peter, I really liked your video, have you tried with printer ink? Or plotter ink? I have a posca and empty markers to fill, I use acrylic ink but it is not as fluid as molotov, any suggestions?

@PeterEvansArt

3 ай бұрын

Hi, I haven't tried printer ink but that is a good idea. Not sure if it is water based? I am going to try some liquid paint I have and use a thinner such as floetrol or even water.

@pedrollobet

3 ай бұрын

​@@PeterEvansArt

@pedrollobet

3 ай бұрын

I buy a fairly normal acrylic ink of normal quality as far as I think, they are not known brands, I have diluted with water but when making strokes are poorly defined, it is not consistent, the empty markers are a purchase I made by Amazon from a brand called "Kisston Marker" I guess they are fairly inexpensive markers to start. But I'm starting to question the quality, because the acrylic ink I use is not the worst either.

@PeterEvansArt

3 ай бұрын

Hey Pedro, Could be worth trying your ink in an empty Posca Marker just to rule out the ink as the issue of the poorly defines and inconsistent line. Ive never tried the Kisston Markers before.

@pedrollobet

2 ай бұрын

hey my friend, I tried refilling a marker with printer ink and surprisingly the markers work very well so far, I didn't use any particular brand, I was given 1L of generic ink and so far it works quite well. obviously it does not have the viscosity that acrylic ink can have or the density, but I think it is an alternative, greetings from Venezuela.

Were do u buy that refiller?

@PeterEvansArt

4 ай бұрын

Hey Carmen, which one are you chasing? Maybe just Google or search it online for the best deal in your area. I have provided some links via Amazon.

What about water based? Is one for all is (water based) ? Thank you very much 👍

@PeterEvansArt

5 ай бұрын

Yes, it is. All of these are water based inks.