Thank you for explaining. I cant wait to try on my wedding flowers.

My favorite is the blue one.

Clear! They are gorgeous! Yellow is very Spring. No help here. Ha! Silver is beautiful!

I really love the clear and would let your table cloth color show through! Your flower placement is perfect!

@glitznglitterbymichelle1

2 ай бұрын

Oh thank you!😊

They are stunning. Thank you Michelle.

Clear. So nice and clean

Yellow for sure, or a light blue for the sky

Just beautiful!

They look Amazing

Beautiful they look amazing❤☺

They turned out beautiful

Thank you for sharing ❤️💋 For some reason I feel a kinship to you and your Art , love it 😍

Love those coasters!

Nice choice! I love the silver!!!

Light yellow looks good

They are beautiful

Just beautiful ❤

I was all for clear until I saw the finished product. They are on a whole different level..love them.

Love the latex idea for drips. Sure wish I had know this sooner!

🎉Love 💝 them, clear. That way it shows the color of cloth beneath. 😊

Yes liquid latex works awesome

I like them clear but I also like the silver.

Love these. Yellow back ground

Stunning!

Those flowers are wonderful. You do lovely work!

@glitznglitterbymichelle1

9 ай бұрын

Thank you so much 😊

They are so beautiful.❤ Clear.

Beautiful!!

Love the clear

It's lovely clear

Beautiful!!!!!

those turned out NICE I preferred them CLEAR also...

I like them clear

so beautiful and I learned so much from you tutorial, thank you!!!

@glitznglitterbymichelle1

Жыл бұрын

I'm so glad!

I LOVE THEM! I'M A FREAK FOR FLOWERS ANYWAY! THEY'RE SO YOU WITH THE GLITTER! I MEAN THEY ARE FOR YOUR DINING ROOM 😅😅❤❤

Totally gorgeous!!!!😊

I love them. You have so much talent

@glitznglitterbymichelle1

10 ай бұрын

Thank you ☺️

Gorgeous!!! I love them, great job. Would've left them clear though. I love the floating appearance & they're more neutral...for any room.

Gorgeous

Clear are gorgeous

Hi, these are so beautiful. Keep up the good work.

@glitznglitterbymichelle1

Жыл бұрын

Thank you!

I do like the clear . They are beautiful.

@B.L.Creations

5 ай бұрын

But now I see the yellow background, I do like that .

Theyre beautiful

They needed the glitter verynice

I didn't think it was an error, lol. They are beautiful. I ❤ the placements of your flowers😊. I am learning so much from your videos.

@glitznglitterbymichelle1

5 ай бұрын

Thanks so much 😊

I like the clear

Beautiful!

@glitznglitterbymichelle1

Жыл бұрын

😀

Beautiful ❤🎉

Thank you so much Michelle.

@glitznglitterbymichelle1

8 ай бұрын

You are so welcome

Lovely 😊

beautiful work!

@miniscenesgb

Жыл бұрын

by the way to stop them floating - try putting a very shallow layer of resin first. let it set about 70% so it's still reallys sticky then press your flowers onto it - then pour again :) no floaties :)

Great tutorial thanls

I love them! I would have chosen the silver also! Thank you. You are so talented!

@glitznglitterbymichelle1

11 ай бұрын

Thank you so much!

Perfect!

So beautiful!! Thank you for explaining everything in such detail. Today I tried making a resin project and was so discouraged, after seeing your video I’m going to try again. Thank you so much❤

@glitznglitterbymichelle1

Ай бұрын

You can do it!

Pretty

Silver looks good to

I think there pretty clear

Beautiful

Beautiful work, thank you for sharing hope you are doing well 🌺

@glitznglitterbymichelle1

11 ай бұрын

Thank you! You too! ❤️

Silver was georgous.

Clear

These are so lovely! I'm doing a square one for a frame & need an opaque background to hid the adhering tabs. I first thought I'd have to fill the mold with white epoxy then add the flowers. This a much better way. Perfect video for learning this! 💮🌻

@glitznglitterbymichelle1

10 ай бұрын

Wonderful!

@amandaavery2702

8 ай бұрын

@@glitznglitterbymichelle1 how many ounces of part a and how many ounces of part B to make the resin do you pour each?

@glitznglitterbymichelle1

8 ай бұрын

Measure your mold with water first to see how much resin you need. Say you need 6 oz, then do 3 oz of each part if you are using a 1:1 ratio resin.

You could have done a very light blue background to look like the sky. Gorgeous job! 😍

Either way would be beautiful. Clear would show the color of whatever table cloth you're using, or the wood of your table. You can make more sets a different way to show that the possibility is really endless with art. You did a great job.

@glitznglitterbymichelle1

Жыл бұрын

I will be making 4 more next week, stay tuned!

Very pretty! ❤

@glitznglitterbymichelle1

10 ай бұрын

Thank you! 😊

I’m new to resin and I’ve done the exact same as you. Next time I’ll put a thin layer of resin, the flowers let it cure then fill up

Great pick with the silver..that would of been my choice...

Nice

Left it clear

They're beautiful as they are. No colors!!! Maybe a gold border???? I would have made the first layer really thin, just to anchor the flowers. Or even dabs of UV resin cured with the hand held UV light. I have also seen people paint the flowers with resin. Daniel Cooper has a good tutorial on dried flowers.

I would have used a medium yellow, with glitter!

Yellow

I have like a million questions!! These are beautiful! 1. How do you store the “leftover” flowers ? 2. What was the purpose of the latex? 3. What do mean domed? I would think if they were domed they wouldn’t work well as say a “flat coaster.” 4. Could you have poured a thin layer allowed to get sticky then put the flowers down? 5. Why did you choose to lay the flowers face up? If placed face down, I think I could pour a back on more easily. Annnnd lastly these are just gorgeous! I was thinking you could’ve put a different color for the back of each one!

@glitznglitterbymichelle1

Жыл бұрын

Wow ! Ok 1. Flowers are stored in a plastic bag in a tupperware container. 2. Latex was to keep any accidental drips from ruining the opposite side (in case I "overfilled" the top coat. 3. Domed just means you fill to where it looks like it comes higher than the mold without breaking the surface tension. 4. You could have placed them facing down as well but I wanted to be able to see the exact placement for the finished product. Thank you so much for watching!!

@JustConfused_24-7

Жыл бұрын

@@glitznglitterbymichelle1 wow thank you so much!! I can’t wait to try this!!

@glitznglitterbymichelle1

Жыл бұрын

@@JustConfused_24-7 I'd love to see them!

Silver on blue

Pale Lemon would look best.

Girlfriend Your Energy is Amazing and Blessed 🙌 😇 🙏 Thank You for sharing! I want to make this 😍 😩 Aiy Chigona ! Lol! I gotta make a list of materials! We can Write it in our Journal! Aiy'Pinche I Love Art!

@glitznglitterbymichelle1

Жыл бұрын

LOL Thank you!! I'd love to see them when they are done!

Love it, I made making these one of my summer projects. I grow cut flowers and am wanting to find new and different ways to preserve the flowers. I am a bit confused on the latex. is it just so none of the resin pours over edge? How do you make sure that they are even since they are coaster and we don't want them to wobble.

@glitznglitterbymichelle1

Жыл бұрын

the latex was on the bottom just in case of any drips that would come over the edge. Then you peel off the latex. You can also tape them with masking tape as well you dont have to use the liquid latex. That's awesome that you can do your own flowers!! I wish I could but I dont have a green thumb... Thanks for watching!

Michelle try putting a small amount of resin with flowers and they will not move or float, then you can fill it up

@glitznglitterbymichelle1

4 ай бұрын

Yes, I figured that out after I did this video 😁

@karenmclaughlan9128

3 ай бұрын

Hi, I'm going to attempt putting dried pressed flowers same as Michelle used. Saw your comment and wondered what you meant, could you tell me please thanks

@glitznglitterbymichelle1

3 ай бұрын

@@karenmclaughlan9128 pour the mold half full, place your flowers and then let it cure. Once it’s cured pour the remaining resin. That way your flowers won’t float to the back of the project.

@karenmclaughlan9128

3 ай бұрын

@@glitznglitterbymichelle1 But the flowers are still going to float even if I place them into resin that is half full surely

@glitznglitterbymichelle1

3 ай бұрын

@@karenmclaughlan9128 not too much though

Hello! 🤗 The coasters are beautiful, the blue is amazing. How do you do so that humidity does not affect the hardening of the resin?

@glitznglitterbymichelle1

Жыл бұрын

I keep the house at 77 degrees, I'm in SW Florida

@arelisfashion7251

Жыл бұрын

@@glitznglitterbymichelle1 Thank you!🌸

How did you add the back. I love the silver

@glitznglitterbymichelle1

Ай бұрын

Glitter mixed in resin and back coated.

I love them Tara Jim’s wife Gods good

Nice video! May I ask why you don't seal in the silver paint along the rim? Won't that chip off?

@glitznglitterbymichelle1

5 ай бұрын

It can rub off, yes, and it can be sealed in I just didn’t do it 😑

Hi! They came out absolutely gorgeous! Can you please tell me where you purchased your molds?

@glitznglitterbymichelle1

9 ай бұрын

Here’s a link to them amzn.to/45qcSUR

What did you use for the glitter coat, I love that silver?

@glitznglitterbymichelle1

Жыл бұрын

All the products will always be linked in the description because I will never remember what I did doing videos everyday 😉

Michelle, I followed your steps exactly to make these coasters and when i took them out of the mold, they had bubbles that had broke on the back of them and you could see into the flower. what did i do wrong. thank you

@glitznglitterbymichelle1

2 ай бұрын

I’m not totally sure but maybe next time pour clear into your mold first then maybe coat the flowers in resin before placing to help avoid bubbles. I did those over a year ago so I’m not completely sure how I did them anymore without rewatching the video.

Question... why would you not do a thin coat 1st to prevent flowers from floating so much? Then top with thicker coat?

@glitznglitterbymichelle1

5 ай бұрын

Yes I would now, this was one of the first times I used dried flowers, I learn a lot from my own errors LOL

What is last coat u put on top hardener resin or d light resin

@glitznglitterbymichelle1

Ай бұрын

UV Resin? It's been a long time since I did this video so I can't remember. If I used a light to cure it then it was UV resin.

Why would you dome coasters? Will a cup be able to sit on em?

@glitznglitterbymichelle1

9 ай бұрын

Yes they are still flat it just stop’s sharp edges

Should have gone with white or yellow, the silver blurs everything…IMO 🇨🇦

Why do you use the silacone on the other side? They are beautiful

@glitznglitterbymichelle1

10 ай бұрын

The latex? It’s to keep any potential drips off that side so it doesn’t get ruined if the top coat dropped down. You can use painters tape too. The latex is easy to peel off.

@lauraparsons7

10 ай бұрын

@glitznglitterbymichelle1 Thank you !!! Masking tape should be ok as well?

Pkease clarity. What is the " doming" on the back?

@glitznglitterbymichelle1

10 ай бұрын

Anytime I top coat I try to dome it so there is less to no trimming off sharp edges. Just adding a bit more resin to make a “bubble” type dome without breaking the surface tension.

So beautiful! by my questions you will see that I'm a real beginner; why did you use liquid latex instead of tape? why did you put your liquid latex underneath instead of on the rim? for the first coat, why didn't you use UV resin instead of regular resin that you have to wait 12 hours or so ? ( sorry for my bad spalling, I'm french Canadian) thank you for sharing and have a great day !

@glitznglitterbymichelle1

11 ай бұрын

I used latex just to show how it’s done you can use tape as well. If the resin spills over it drips from underneath so that’s what I wanted to protect. I don’t use UV resin for top coats on coasters because it not only uses too much it also doesn’t cure as nice that large. Thanks for watching 😊

I am new and trying to educate myself on resin pouring and second layer. Noticed you did not sand? but let cure over night 12 hours but seemed to take second layer just fine. Why or what determines whether you sand or not? thank you in advance

@glitznglitterbymichelle1

9 күн бұрын

I never sand unless there is an issue to fix

@jillcollin6493

9 күн бұрын

@@glitznglitterbymichelle1 thank you

Honestly, I would have left them clear.

Why do you spray with alcohol?

@glitznglitterbymichelle1

9 ай бұрын

To pop bubbles and protect the mold from torching it.

Yellow or leave it as is

may i please have link for mold?

@glitznglitterbymichelle1

4 ай бұрын

It should be in the description box

Why did you spray them with alcohol Thank you

@glitznglitterbymichelle1

5 ай бұрын

To pop bubbles instead of torching

Why the back side of resin is blurred any idea mam

@glitznglitterbymichelle1

Жыл бұрын

I’m not sure what you mean, maybe the silver glitter is showing that on camera?

@SeemaKumari-xv3th

Жыл бұрын

@@glitznglitterbymichelle1 when ever we make some coaster one side only shine back side area design will not come if it's visible also but it's totally blurred not shine what to do

@SeemaKumari-xv3th

Жыл бұрын

I am saying whenever we made coaster only one side shine back side is blurred. What u r making that super .

@glitznglitterbymichelle1

Жыл бұрын

They will only shine if the mold is shiny. If it’s dull (the mold) you would top or bottom coat them with clear to fix that.

Clear is better