Dave. Good video and good information for more consistent chrono and shooting. I appreciate your sharing with us. Take care and hope you're back to feeling 100% very soon.

@davestrohmeyer-saddleupsho8009

6 ай бұрын

Thanks Bobcat! I just saw your 6.5 Creedmoor reloading video. Suggestion for a quicker bullet seating set up. 1. A dummy round (without powder or primer) seated to the depth you want for future loaded rounds. 2. Back out your seating plug, place the dummy round in the press and run the ram up, hold and then screw the seating plug lightly down until you feel it touch the bullet. 3. No further adjustment is needed on your to be loaded cartridges after that. 4. Mark the dummy round for future reference for that bullet only of course.

@bobcatforever3485

6 ай бұрын

@@davestrohmeyer-saddleupsho8009 Dave. Thanks very much. I will do that. That will save me a lot of time and headache. That will give me something to do tomorrow plus there are several other rounds I need to do that for as well. Again, thanks much I really appreciate your reloading experience. Take care and keep up the good work!

Very true Dave, I was amazed how much difference it makes when you start with quality brass and process it properly!

@davestrohmeyer-saddleupsho8009

6 ай бұрын

Thanks for watching and for your comment here.

Those are great tips and something I had not given much thought too...I guess I need to pick those tools up too. I just ordered a Hornady concentricity gauge to up my game a bit. Whoever said this reloading thing would save me money is just flat wrong...LOL. Cheers

@davestrohmeyer-saddleupsho8009

6 ай бұрын

Never going to save you money. But you will shoot more because of the dollars spent. That fact of helping you enjoy our sport more is priceless indeed.

Great information Dave. When I think through a process, I try to slow the process down into individual steps. Then, think through each step by itself and how it interacts with the other steps. It seems there is always a way to improve efficiency of the steps and a total process.

@davestrohmeyer-saddleupsho8009

6 ай бұрын

Well said!

Two very good tools, whether manual or mechanical such as a machine. Spend the time and do it right, only once...simple. Good chat Sir, Thank you.

@davestrohmeyer-saddleupsho8009

6 ай бұрын

I have not seen the mechanical attachment for the flash hole uniformer for my Lyman case prep express. You are right though and I should have mentioned these two tool only need to be used once for the life of the case. Thanks for watching.

Merci Dave pour les conseils 👍👍👍

@davestrohmeyer-saddleupsho8009

6 ай бұрын

Your welcome. Thanks for watching.

Weather isn't helping me either. Thanks for the video!

@davestrohmeyer-saddleupsho8009

6 ай бұрын

You and me both!

Great info! thanks for sharing, just getting into reloading for myself

@davestrohmeyer-saddleupsho8009

6 ай бұрын

You can do it! Best wishes for your Reloading endeavors

I am glad you are feeling well. Also happy that Federal is taking care of you. They are just 21 miles from me in Minneapolis in the northwest metro and I have a friend of a friend that works there. Now I won't have to harrass him next time I see him. 😂 Let's hope they admit it was a poor lot and ship you some fresh quality catridges.

@davestrohmeyer-saddleupsho8009

5 ай бұрын

We shall see. I have not yet got a return e-mail yet and they have had my returned boxes for 1 week.

Good Morning Dave!!! Gad to hear you getting better!! I've been looking at BC 243 AR-10 too, been thinking about getting one! Good hand loading tips!!! I'm also waiting to get out to shoot, we got 12" of snow last weekend!

@davestrohmeyer-saddleupsho8009

6 ай бұрын

Sounds like we are in the same set of circumstances

Bitter cold where i am. Next week it is going to improve and i hope to get out there. Thanks for the tips.

@davestrohmeyer-saddleupsho8009

6 ай бұрын

Have fun! Thanks for watching.

I've always carefully prepped my cases because if I'm going to spend the time to reload I always do the best job I can. It's rewarded in the end with consistent velocity and consistent accuracy. Rest up, load up and we'll see the results when the weather gets warmer. It's been down to -10 here last week and this morning 0 in WI. Not the best for accuracy shooting.

@davestrohmeyer-saddleupsho8009

6 ай бұрын

Thanks for watching and stay warm in WI.

Get better soon! I have a board with holes the necks fit in to go in sonic cleaner for times I've trimmed brass in any which way...a rinse gets most out...but a sonic clean with the cases upside down...neck down...always produces a bit more of the trimmings....which won't be blasted down the barrel... I do wonder how much difference all these little changes make...😅

@davestrohmeyer-saddleupsho8009

6 ай бұрын

Thanks for the tip!

Looking forward to seeing the results of your loads Dave. I have a friend who lives in Idaho Falls. He told me you guys are getting hammered weather wise out there.

@davestrohmeyer-saddleupsho8009

6 ай бұрын

Yes, but we are thankful for the mountain snowpack needed for Agriculture this summer.

Hello man! Good information! ❤❤

@davestrohmeyer-saddleupsho8009

6 ай бұрын

Hello CW! Thanks again for commenting here.

Great advice Dave. ! It seems the Snow has found you .have the Sub Zero Temperatures ? It's -15° F this morning in Frozen Chosin South Dakota. Dave get out And smoke a Coyote with your BCA 243.

@davestrohmeyer-saddleupsho8009

6 ай бұрын

Yeap, the Arctic blast seemed to hit allot of people. It's definitely winter and single digit temps.

Should do a military ammo case where it was crimped.

@davestrohmeyer-saddleupsho8009

6 ай бұрын

Already did. See my "Shorts" playlist.

Great video and great information! What is your favorite hunting bullet for your 243?

@davestrohmeyer-saddleupsho8009

6 ай бұрын

Still working on that, because of all the new bullet choices. But if I had to pick just one companies line of bullets it would be Sierra.

@carlwilliams6300

6 ай бұрын

Same here buddy thanks for getting back with me

Are you putting a crimp on the bullets you load for the .243 AR?

@davestrohmeyer-saddleupsho8009

6 ай бұрын

If the bullet has a cannelure groove, then yes.