.223 Rem. 55 gn. Nosler Varmageddon | 3 Powders Tested | Are Pulled Bullets Accurate?
Спорт
Please note: The 4th "Double Fire" shot is NOT shown on the final target analysis, it went 4 inches high. A 5th shot was made, off camera, to represent the 4 shot group shown.
This Video Topic:
I picked up some Nosler 55 grain Varmint bullets for 8 cents apiece. These bullets are "Pulled" from a previous loading from the manufacturer and are sold at a deep discount because they cannot be re-used by the manufacturer. So we are testing to see if they are accurate enough for hunting accuracy.
*This video meets all KZread content and safety requirements, including target shooting on "My own property and a neighbors rural ranch private property with (Permission in writing.)
* There are no modifications of the Firearms, Ammunition or Optics shown in this video that is unnecessary to the proper and safe function of the firearm intended for Hunting or Target practice.
*Strict adherence to SAAMI, (Sporting Arms and Ammunition Manufacturing Institute) is maintained at all times.
*There are NO affiliations, or promotions, with any of the manufacturers of products shown in this video.
*No firearms or ammunition are offered for sale and I am not promoting for sale any firearms or ammunition shown in this video or video description.
** These videos are strictly for educational and entertainment purposes only. Imitation or the use of anything demonstrated in my videos is done AT YOUR OWN RISK.
Пікірлер: 30
I just found this video on your .223 Rem. 55gr. Nosler Varmageddon rounds too. I found it interesting to watch 00p's he he he I Did enjoy it a lot my Friend
@davestrohmeyer-saddleupsho8009
Жыл бұрын
Thanks for watching. Later video shows the results of a trigger fix to prevent a double fire.
Morning Dave Looks COLD!! Warmed here last couple days. Hit 50° again! Happy New Year!! Running the smoker here yesterday and today getting ready for tonights festivities!! 🎉🎉
@davestrohmeyer-saddleupsho8009
Жыл бұрын
Mornin' Brian. Happy New Year to you and a wish for your complete recovery and a new puppy-dog.
I'm getting short of breath just looking at all that snow in those hills! By double-fire, do you mean slam-fire? It happens once in awhile with soft-cupped primers in guns with free-floating firing pins. I hope those bullets are accurate. 'Chuck season is right around the corner! Happy New Year! Thanks for sharing, Dave!
@davestrohmeyer-saddleupsho8009
Жыл бұрын
No it is a true double fire. It happens when your trigger pull or grip discipline is too loose and a fast trigger reset runs into your relaxed finger. The remedy is too have better trigger pull and hold management. My bad.
I picked up some pulled freedom seeds from A.R. that had heavy pull marks... I ran them thru a Lee sizing die and tighten up the groups and lowered the ES on the velocity.
@davestrohmeyer-saddleupsho8009
Жыл бұрын
Good idea. Thanks for your comment here.
Just got done reloading 300+ with imr 4166. 55fmj for plinking. Happy new year.
@davestrohmeyer-saddleupsho8009
Жыл бұрын
Best of luck to you!. Happy New Year.
You might want to get you one of those heated triggers, Strohmeyer! 😂 Healthy and prosperous new year to you and yours! Keep em coming!
@davestrohmeyer-saddleupsho8009
Жыл бұрын
Thanks for the suggestion. HaHa! Happy New Year to you also.
Happy New Year Dave!! See you next year. God Bless.
@davestrohmeyer-saddleupsho8009
Жыл бұрын
Thanks Stephen!
Not saying I know too much, but with the 55 grain NOSLER. 2230 is a great powder , It shoots very well in 2 of my ARs.
@davestrohmeyer-saddleupsho8009
Жыл бұрын
Thanks for suggesting Accurate 2230. I have not used Accurate powders, but I here good feedback about them.
Nosler are usually b.a. and worth the cost for 125 gn 308. Usually I just shot Tula steel.
Happy New Year Dave.
@davestrohmeyer-saddleupsho8009
Жыл бұрын
Same to you and yours Jim.
I have that same upper. PSA 24" I was lucky to get it, I don't think they made very many.
@davestrohmeyer-saddleupsho8009
Жыл бұрын
Thanks for watching.
Dave. Another good and interesting video. I am going to try my hand at reloading, so your videos will become more important to me as I get at it. I will initially be looking at handgun rounds, .357 and .44 Mags. So, we will see how that goes. Take care and have a Happy New Year!
@davestrohmeyer-saddleupsho8009
Жыл бұрын
Congratulations Bobcat. In many ways reloading for handguns is more difficult and exacting than reloading for rifle cartridges.
@bobcatforever3485
Жыл бұрын
@@davestrohmeyer-saddleupsho8009 Thanks. I expect it to be a bit of effort. We will see how it goes.
Happy New Year Dave . Assembling a 20" 6.5 Grendel barrel to a BCA Side Charging upper I Need to get 17 " FDE hand rails and barrel nut. I'm going with CMC 3.5 drop in trigger. I haven't decided on a Scope.yet any suggestions for a good mid price point Rifle Scope 400 and under.
@davestrohmeyer-saddleupsho8009
Жыл бұрын
Sounds like a fun project rifle for you. IMO, The Grendel (for hunting) should be married up with a hunting scope in the 4-16 or 6-24 adjustment range. I don't hold with most of the experts on expensive scopes. I like the side parallax scopes in SFP. As you know I am partial to a scope that has external windage and elevation adjustments and have purchased 5 of the Ohhunt $200 range scopes.
The pulled bullets seemed to make holes pretty good, did you happen to inspect and sort the worst ones out as you reloaded or all seemed just cosmetic blemishes? I have a project(stupid maybe) I'm mulling over, where because of component shortage still, I have thousands of cheap 55gr and green tip ammo , just bought 500 77gr factory seconds, thought I'd pull the light weight bullets and reload using the salvaged components and make 77gr ammo(maybe sort and more accurate weigh the powder but won't know until I weigh the original to find out how consistent they were loaded to start with). Even typing it out makes it sound stupid.
@davestrohmeyer-saddleupsho8009
Жыл бұрын
The pulled bullets are significantly damaged where their bullet puller somewhat dented them. But it seems to be above the ogive. More testing is needed to test accuracy at distances up to 400 yards. As far as deconstructing bullets with unknown propellant's and reusing them. That would be a definite NO-GO!. However if you are just using the cases from a known credible manufacturer, resizing and using fresh (known) components with established book powder charges for your new bullets then sure enough go for it and proceed cautiously.
Are you more concerned about accuracy or speed
@davestrohmeyer-saddleupsho8009
Жыл бұрын
For smaller 'hunting calibers', speed is your friend along with proper bullet construction. Speed is a measurable and reliable input to gauge ballistic data for a more predicable shot placement on game at varied distances. Hunters place a premium on MPBR. For the precision competition shooter, Accuracy is paramount. So both are important depending on your primary discipline.