Might want to check your manual. Pretty sure that you do NOT screw the dipstick back in for reading. You remove it, wipe it, put in in but only until it stops, then read.

@Marius-Gvr

3 жыл бұрын

On my tuono 1100, that is the correct way of measuring (only rest the dipstick on the thread, not screw it in). However, I know that on other aprilia models you need to screw the dipstick. I agree, double-checking the manual would be the correct way of proceeding.

@rudedog3529

3 жыл бұрын

@@CaliMotoTV The difference would be about the same as the upper and lower line on the dip stick. Top line , not screwed in got me 2.750 qts., yesterday.

For the sake of 2 more screws, the black plastic shroud could come off, giving easier access and visibility to the oil filter. I like to have the pans and tools ready, and drain the hot oil immediately on arrival.

Dude, love all the content on the RS 660... mine is on order...

Great video, very informative. Definitely needed this and will apply it to my bike. Many others have done reviews but not enough detailed or maintenance reviews of the bike. Looking forward to more of your videos.

Loving those vids!!!

Great vid 👍🏻 Much prefer I sight glass to a dipstick though, I had the same on my 675R and hated it. Sight glass on my 899 is so much quicker and easier.

It's easier and bit quicker to drain the oil when the engine is warm. Warm oil flows out easier and better.

@MotoGoato

3 жыл бұрын

Yes, Ville .... you are 100% correct ... warm oil has a lower viscosity so flows better. The proper way to drain the oil is get the engine hot, then shut it off and let it sit for about 15 / 20 minutes to allow all the oil to flow down through the engine and collect in the sump then drain it whilst it is still warm. Letting it go stone cold and trying to drain it when it's at it's thickest is just plain daft 😉

@TK-cl1jm

3 жыл бұрын

@@CaliMotoTV Yeah, no. You want the oil warm. It will stay warm for quite a while after it gets to the pan.

hey man great vid thank you so much, quick question, can you link me to what oil and filter did you use? im having trouble finding the right one, thanks man

Thanks for this I just got mine

@ArmandoSanchez-ob3dd

3 жыл бұрын

@@CaliMotoTV such a great bike but very sensitive the throttle position sensor bugged out in the first 100 miles

@rudedog3529

3 жыл бұрын

@@ArmandoSanchez-ob3dd Bike geared way tall and lean for emissions. Grabbing a handful in 6th gear on the freeway will bog a bit if you're not too far over the speed limit. Hoping the 600 mile service and flash will help with that.

Thanks for the video! BTW, manual says you don't need to screw the dipstick in to check oil level, just put it in and remove.

@CaliMotoTV

2 жыл бұрын

👍

Just bought one of these. I cant find any service interval literature, but you're saying you did this at 200 miles? I'm on 180 miles already so should I be looking to be doing this too?

Todo súper, pero que scanner usar para borrar la luz de mantenimiento, es como que todos la dejan prendida 🤣

Are the fairings all plastic? And what is the API rating of the oil you used?

How often do the valves need to be checked ?

if you go "hand tight" on the oil filter... you might want to check that again after you run the engine hot... they can slowly loosen up... I prefer to get them a bit tighter than my "hand tight"... as those rubber seals age that "hand tight" can become a problem, just my $0.02 from seeing them come loose at Track Events!

@daveo9844

3 жыл бұрын

Hand tight for me too. 35 years riding and not one leak 👍🏼

@STIjojoSTI

2 жыл бұрын

It should be tighted using a filter wrench.

Isnt there like a service advisory warning when it reaches 1,000? How do you get rid of that without bringing to the dealer?

@CaliMotoTV

2 жыл бұрын

You don't. Gotta go to the dealer.

What size crush washer do you need? Can’t find info anywhere

Whoa what's the torque measuring device? Never seen that before...I only know of torque wrenches. Is that an "adapter" for any wrench?

@surferdude642

3 жыл бұрын

Rick, that is a digital torque adapter PTM206, about $60. I purchased a similar one AC Delco ARM602-4, about the same price. It works very well and the low range is lower than the PTM206. The only issue I have is that they advertise a low range of 4 ft lbs. My experience was that it is more like 17 ft lbs. If you have a standard click type, you can use one of these for calibration.

I think i just messed up and opened coolant plug behind the oil filter, do you have a video guide how to fill the coolant on rs660

great video - I love that torque tool - can you please link to it?

@CaliMotoTV

2 жыл бұрын

There's a video on the channel for garage tools. It's off of Amazon.

Hello I'm from Taiwan Aprilia RS 660 TUONO is my dream motoclye so I very very like video。thank you so much。 I have a question，Aprilia RS RS660 have not Oil window??

Great video, thanks for sharing - Very useful.

@CaliMotoTV

2 жыл бұрын

Thanks for watching 🙏

Very useful video. Please remember that Motul V300 requires shorter change intervals than say 7100.

@flashRIGA

3 жыл бұрын

for road use what you recommend ? Bardhal XTS or XTC or the Castrol from Aprilia ?

@mauriziozanni4161

3 жыл бұрын

@@flashRIGA Bardahl, always.

@astrostrotch

3 жыл бұрын

This is very important, it is a racing oil and doesn't have the additive packages to meet high mileage change intervals.

good morning, do you also have the video of the spark plug change? please

tanks for the video , but how reset the service indicator in the display? can you show this ? regards

@ianjoe9909

3 ай бұрын

Hello eso mismo iba a comentar yo, todos hacemos oil change en casa súper fácil, pero que scanner recomiendan para borrar la luz de mantenimiento ? , nadie habla sobre esto es como que la dejan prendida 🤣, si conoces alguno que funcione para mi Aprilia rs660 2023 por favor dejarme saber, saludos

Hello again mate im trying to follow some of your videos and im really into this rs 660 but i cant really decide, i wanted to ask you if you can help me with an answer :) i cant decide between rs660/f3 675/street triple rs or maybe yamaha mt09 what would you say if you had to choose between one of four

@Mcanozcelik

3 жыл бұрын

And forgot to mention its gonna be a daily bike

@Mcanozcelik

3 жыл бұрын

@@CaliMotoTV thanks man i used 2x 600rrs a gixxer 1000 and 1000rr in over 15 years. But supersports got real expensive here almost double of these options so i cant afford those. These 4 options are same price here in Turkey. Mt09 is what people suggest me due to holding value as you said and most reliable but i didnt really want those :) so im between agusta 675 and rs 660 now

Don't the engines come from the factory with mineral oil to aid breakin? or am I living in the 80's

Hey Bill again vid awesome... I just got my first 2019 rsv4rr 10 miles on it .... the dealership is telling me I have to take it back when I get to 600 miles for the service ,saying that they have to check and torque all the valves ...if not al damage yes moto ! Is that true?.

@DRenatod

3 жыл бұрын

@@CaliMotoTV if I do all my self well I void the warranty ??? They wanna charge me $400+ tax !!!

@DRenatod

3 жыл бұрын

@@CaliMotoTV thanks bill ..

why is the oil so few? is it drying while you ride?

FYI: From the shop manual (PDF). The drain plug should be 20nm, Page 44. 2700cc's of oil, Page 19. The owners manual says 2700cc's as well on Page 182 (PDF).

@christianmiller8691

3 жыл бұрын

Put a link in here for that shop manual because it’s definitely not in the owners manual

@bobv7657

3 жыл бұрын

Link for the shop manual. www.af1racing.com/oem-aprilia-service-manual-21-rs660-and-tuono660 You can also find the owners manual there as well. The Aprilia Forum has tons of great info from guys. www.apriliaforum.com/forums/forumdisplay.php?111-2021-RS660-Tuono-660-Toureg-660

@edge929

Жыл бұрын

Service manual was updated July 2022. It's now 2300cc's of oil.

@bobv7657

Жыл бұрын

@@edge929 Thank you...I'll download the new version.

Can you show how to do the reset

Thanks for the video but it doesn't get stuck in the oil filter without putting oil

You need to check if you take the oil level from full screwed in dipstick or like some bikes not screwed in ?

@CaliMotoTV

2 жыл бұрын

👍

@thomaskopinitsch2979

2 жыл бұрын

Definetly not screwed in as the manual says for this bike

Does the bike have a maintenance light that you have to deactivate if so how to?

@CaliMotoTV

2 жыл бұрын

Dealer resets the maintenance light.

My brand new bike Tuono 660 burnt 2 quarts of oil in the first 600 miles. I should’ve got the XSR900.

like this video.

did you replace the rubber gasket on the filter?

@Marius-Gvr

3 жыл бұрын

New filter came with rubber gasket.

What were you yanking on @ 5:05

Has to be level when you take the oil level right? Not on the stand ?

@CaliMotoTV

2 жыл бұрын

Level

How do you turn the service light off on the dash after the service?

@CaliMotoTV

2 жыл бұрын

Dealer has to reset it.

@RicoRico1982

2 жыл бұрын

@@CaliMotoTV oh no. That's a bummer. I thought I could shut it off since I'm planning to change my oil on my own after I watched your vids. The dealer's 2 hours away from where I am.

@mikeglick3886

2 жыл бұрын

The service light may come on for a few seconds until the sensor registers the correct oil content, after that it should go off. There are codes you can look up online to reset the error.

With a new oil filter do you need 2.7LT?

@CaliMotoTV

2 жыл бұрын

Not sure, sorry. No longer have the bike so can't double check.

@kevin.Rsv4

2 жыл бұрын

@@CaliMotoTV what happened? Too slow for you?

Service guy says, when you change oil filter before you assembly, put oil in to filter.

@labrador3473

3 жыл бұрын

@@CaliMotoTV well it's good to know, thank you

Can someone tell me why is there a random wire hanging down (2:25)? Can you putt the wire back in, after installing the piece? I just found out my bike has that cable and i was kinda worried, but I can see that is part of the bike and nothing has broken :D

@CaliMotoTV

Жыл бұрын

It's supposed to be there is the gas tank overfill tube.

@brahimassikiou874

Жыл бұрын

@@CaliMotoTV Oh thank you sir! I couldn't find any information about it! What it does is just evacuate any excess of gas right?

It's nice to see that Aprilia included a magnetic drain bolt from the factory! (I'm presuming that's what the small tip on the drain plug is, anyway). I've done the same thing with all of my street and race bikes for the last 35 years... change early, and change often! The first 200-300 miles is when the engine is polishing up the reciprocating parts, so you'll find lots of small metallic debris in the oil... it's smart to get that out of the sump ASAP! Oil is cheap, motors aren't. 👍👍 --QM

@labrador3473

3 жыл бұрын

My Tuono's plug is same as it's,

How to reset the service light?

@CaliMotoTV

2 жыл бұрын

Dealer

Did you really use 300v??? It’s recommended only as a race engine oil so doesn’t contain the detergents and stabilisers that the 7100 motul fully synth oil does. Fine I guess if it’s literally going to be changed every 1000 miles, but questionable for road use at lower temps. Personally I’d stick to motul 7100 and know that the oil stays stable for longer

Hi, What is the purpose of the free hoes ? The one that you pass throught the bottom fairing ?

@Marius-Gvr

3 жыл бұрын

I believe it's a fuel tank breather/drain.

@michaellacassin1911

3 жыл бұрын

@@Marius-Gvr oh alright, thx

Owners manual says to check oil level without tightening

@CaliMotoTV

2 жыл бұрын

👌

Should change oil hot

that oil looked very black.. is that really normal or is it a italian thing

@CaliMotoTV

2 жыл бұрын

Break in oil. Can be a bit more dramatic looking than normal oil changes.

Since this video has come out the new revised oil amount is 2.3L instead of the original 2.7L....Not sure why though.

Sur cette moto, la vérification du niveau d'huile se fait sans revisser la jauge à niveau d'huile...

2,3 LT

@CaliMotoTV

2 жыл бұрын

👍

It's that the secret, unless of cathastrophic projectual faults no bikes or car are unreliable if you know how keep them in perfect shape.

Just so all you Aprilia owners know, changing your own oil and doing any maintenance on the bike yourself as opposed to an Aprilia certified dealer, voids the warranty.

@CaliMotoTV

2 жыл бұрын

Doing really anything to your bike can cause issues with warranty.

@Matthew-re9pb

2 жыл бұрын

Thats kinda bs...then they shouldnt charge so much for the work. Especially if i bring in the parts

Draining the oil stone cold is not the way to do it 🤦‍♂️

1. Make sure the engine is warm…. Cold oil doesnt drain well. That is probably why u couldnt fill 2,6 liters. U didnt drain all the oil…

Man so many errors there you made. So much oil left in the engine for draining it cold not warm at operating temperature. Also the 300v is not street usage oil.

@motorax.service.motociclete

3 жыл бұрын

@@CaliMotoTV theoretically you are right. We always use an engine flush to get as much as possible out, the oil gets very thin and also the engine flush cleans the inside of the engine

200 hundred to 600 hundred miles lol.

hello you made the oil level dipstick screwed it's a big mistake it's dipstick put look on the instructions supplied with the motorcycle You drive with a constant lack of oil Bye ✌️✌️✌️✌️✌️