One of the best videos out there! Installed mine on my 2020 Camry following your video . Turned out great and saved myself 285 for Installation 😇

@nestorautorepair

3 жыл бұрын

There you go thanks for your feedback Samantha , and congratulation on your install and new camry

If you want to run speaker wire from an amp to the front door and tweeter harness (they're linked/parallel) how do you patch in? Is it the same wire color as the B pillar you patched into?

Putting my amp and sub in this weekend. Real nervous about the power wire through the firewall because of how little clearance there is, but this helped a ton, thanks a lot man!

@nestorautorepair

4 жыл бұрын

Your welcome, good luck and thanks for your feedback ,, don't worry you can do it

@djacemoney2449

3 жыл бұрын

Removing the battery helps a lot when trying to run the wire thru the firewall.

@subiyota

Жыл бұрын

Im having a hard time running the wire theough !!!!

@nestorautorepair

Жыл бұрын

Get a wire hanger

So for the power wire, did you poke a hole through the grommet in the fire wall? Like stab through it? Or did it slide in next to all the other wires?

Did you run all the cables on the driver side of the vehicle?

@nester auto repair great video! I tried to pull sound from the same place you were working behind the driver side panel, but I assumed the black and red wires that I found at the speaker were also the same behind the door in that harness 😔. So those 2 wires you used, the purple/white and yellow/white do you think I can pull high level input from those??? And just use high level input??

@nestorautorepair

2 жыл бұрын

Hi yes you can use the hi input there

Wow thanks a lot for this fantastic instructional. You didn't ramble on, you stated a ton of important facts and tips. You kept it simple yet professional. Keep up the good work 👏

@nestorautorepair

2 жыл бұрын

Thanks boss for your feedback , I'm glad my video help you

Wow man, you are best, all in one video. As I didn't had long stick and there was less space on left side so I ran the power wire through the right passenger side. There is a similar spot on right ride. All else went well.

@nestorautorepair

2 жыл бұрын

Thanks boss for your feedback , I'm glad my video help you

Hola Nestor, buen dia! Tengo un camry 2022 y hace poco le puse un converter para añadirle un amplificador y quedo sonando ruidos. Pensé que sería el converter y no, trate con otro diferente y fue lo mismo. Necesito desactivar los micrófonos del carro?

Nice. With the amps tuned wilm the stock head unit still delivers nice high in the tweeters still or it's better to upgrade the head unit in the future?

@nestorautorepair

3 жыл бұрын

Yes it will sound better with a better radio , thanks for your feedback

Making sure installing one isn’t too difficult before I get a new car lol. Seems doable. Would you recommend some kind of switch between the battery and the sub? I never ran anything into my fuse box in my current Hyundai. My amp is designed for car use so it turns off automatically and I’ve never had issues of the battery draining

@nestorautorepair

2 жыл бұрын

Ok

i learned three thiings from this video and ive done a few installs in my time too so thanks for that :)

@nestorautorepair

3 жыл бұрын

Your welcome boss , thanks for your feedback

@braylenwyatt5528

2 жыл бұрын

I realize it is kinda off topic but do anybody know of a good website to stream new tv shows online ?

I need to install a Ham Radio in the trunk. 2 wires from the battery have to run back there. Would you know where you poked the hole if there are any computer wires that might be a issue for a 100 Watt Transceiver? I am trying to find the best path back to the trunk and at the same time staying away from any sensitive car computer wires. Thanks,

@nestorautorepair

3 жыл бұрын

Sure run it the same way I did

Thank you. I’m hooking up a 2014 Corolla. I was originally going to go after market with the stereo, but the backup camera and steering wheel controls was way too time consuming with the two toddlers, so I’m doing this instead. However I hooked my amp up to the right of the fuse (didn’t see this video til now) and even though my remote light wasn’t on, I took your advice and checked with my test light, and you are correct! Power goes to the remote regardless of ignition. Wow! Thank you for that... As far as the RCA goes, I’m splicing into the rear 6x9 with the RCA speaker wires from one end, and females for the male RCA cables to run the rest of the way to the amp. I see the RCA converter you have has some kind of funky looking box... What is that? Because now it’s got me thinking twice about the signal I’m going to be receiving from my 6x9s to my amp. Will it be compromised? Can someone please advise my situation? I will post video when I’m complete. If your input helps me out, I will ring your bell!! 🔔 Have a wonderful New Year, God Bless everyone, -D Griffin

@nestorautorepair

4 жыл бұрын

Wow you love writing lol ,, well if you connect it to the 6x9 it will be ok just make sure you splice them both set of wires ,,wires with lines all together and wires with no line together,, brown is grownd,, hope it helps

@nestorautorepair

4 жыл бұрын

Also thanks for the feedback,, and happy New year bless you and your family and friends

Why to poke to the rear speaker and not directly to the stereo? Is it more strong the signal on the back or just to avoid the trouble to remove the radio. Thanks.

@nestorautorepair

4 жыл бұрын

The signal will not make a different , if you are doing this for your self go for it, but when doing this for customer this is the faster and easy way to do it , let's say you crack something there at the dash , what ever you are charging will not be enough , so at the door will be safe

Buen vídeo gracias por subirlo.. tengo una pregunta, le quiero instalar un subwoofer Ami Camry se 2018 y quiero usar el Jbl basspro hub. La instalación es la misma o se tiene que hacer de otra manera.

@nestorautorepair

4 жыл бұрын

Gracias , Los 2 cable Blanco y Los 2 gris directo Al cable que yo conete que ban para la puerta

Are those pre blown or nah?

So you only need to hook it up to one of the rear door speakers? Or do you have to wire each one separate or just off of one rear door speakers????

@nestorautorepair

3 жыл бұрын

One will work just fine ,, you not doing competition lol you good

Hi, Is the wiring for rear speaker will be the same for 2021 to 2023 camry SE? The positive and negative wiring

@nestorautorepair

9 ай бұрын

Yes

Don’t know if you still check this but followed how you did it and subs work fine not static etc but for some reason now my rear driver side window doesn’t work (no power to it) -any idea? 2019 Camry xse

@nestorautorepair

3 жыл бұрын

Are you sure you use the correct wires , check all your fuses

Thanks helped me put a sub in my 2018 camry se

@nestorautorepair

4 жыл бұрын

You're welcome thanks for your feedback,, good job

@adrianbucio3650

4 жыл бұрын

What type of hi low converter did you use

Hey I followed you exact instructions except running the power wire on the other side of the car. As soon as I turned on my car the amp went into protection mode. Could this be a problem with the amp. It was a amp that I’ve had for 5 years and it overheated a lot. Need help!!

@nestorautorepair

3 жыл бұрын

Oh men sound like the amp is bad then

I need some help with mine ? I took it to a shop but I don't think they wired the lc2 right

tapping into the pillars like that, would that affect the impedance?

@nestorautorepair

2 жыл бұрын

No

Also, were you able to put the fuse cover back on?

@nestorautorepair

4 жыл бұрын

Yes

Wished you showed the wiring behind the stereo,wondering if you still have the stock stereo that came w the car because I do and it doesn’t have rca input plugs it’s very basic so was wondering how yours looked

@nestorautorepair

3 жыл бұрын

I never took the factory radio out

@jasonortiz3066

4 ай бұрын

he never touched the factory radio. thats the whole point of him using the rca converter on the driver side panel. to take the sound straight from the rear speaker

Great job bro. Is it the same color on the passenger side speaker?

Do you have any advice on how to get rattle out of the rear deck? In my TRD the rattle is super bad and I have the fixed backseat so I have no idea on how to remove the seat to access the panel to use sounds deadening. Any help will be greatly appreciated.

@nestorautorepair

2 жыл бұрын

You can add the deadening from the inside of the trunk

@jergernice1

Жыл бұрын

theres a video out there look up 2018 bass rattle camry...you have to shove from underneath foam or padding many times. ive had mine a year, and im still adding foam about every other month. basically the car movement settles the padding so its not tight anymore. at some point i assume it will be full and tight for good.

What amp and subwoofer would you recommend for A 2015 SE with stock speakers... I don't want anything crazy but just something better

@nestorautorepair

2 жыл бұрын

1000 and and a sub 1000

Sounds super good bro 💯

@nestorautorepair

7 ай бұрын

Thanks bro

Low frequency, bass is mono correct. If once can access both left n right speakers. Go ahead and connect both LsndR speakers correct. Otherwise, one can get bass from just the one speaker right? Now w amps w line sensing, you dont connect the remote (blue line)rite?

@nestorautorepair

4 ай бұрын

Thanks

Sorry late to the vid. But did you use any after market stereo?

@nestorautorepair

4 жыл бұрын

Im sure they have some by now yes

I am a little confused, does it matter if you connect the LOC to just one of the speakers rather than both of them?

@nestorautorepair

Жыл бұрын

Not really as long you connect all the cable like I did , you be ok

Hey don’t know if you still look at these comments but I wanted to ask something. Do you have any static feedback? Like does a hiss noise come from your speakers? I had my speakers replaced and an amp put in but that created a hiss noise and they said it was because the stock head unit amp isn’t as powerful . To get rid of the hiss they told me I would have replace the stock head unit with an aftermarket one . I would rather not since it’s expensive and the new dash kit I would have to use would ruin the look. So yeah, I was wondering if you had this problem

@Wavefront101

2 жыл бұрын

I think the hiss noise can occur when you run the signal wire going to the amp to close to other wires which emit noise. This wire should be run away from all other wires to not absorb the noise.

@nestorautorepair

2 жыл бұрын

In some case yes

Hello Nestor, do you know if the speaker wire colors are the same for a 2018 SE Camry non-JBL system? Thanks

@nestorautorepair

3 жыл бұрын

Yes same

@erickz583

3 жыл бұрын

@@nestorautorepair great news! Thanks for the quick response! I enjoyed your video, very helpful 👍🏾

@nestorautorepair

3 жыл бұрын

You welcome thanks Erick

Muy buen video, tengo una duda ese canal no tiene un filtro para bajos" low pass" y cuando se activa el bluetooth en llamadas se escucha por el tambien? Gracias.

@nestorautorepair

4 жыл бұрын

Hola por El momento Todo lo que eh instalado Todo le funciona bien

@angelvelazquez7669

4 жыл бұрын

@@nestorautorepair Espero poder hacerlo en mi auto Camry 2019 se. Me ha ayudado mucho tu video. Muchas gracias.

@nestorautorepair

4 жыл бұрын

Dale cualquier cosa me escribe , suelte

I have a doubt . where is going to the blue wire which you connected to the right side of the fuse ??? Can you explain me plz .......

@nestorautorepair

4 жыл бұрын

Unplug the blue wire and see if everything work ,,

Does the 2018 Camry SE have an RCA output in the head unit? Im installing a compact sub under my seat

@nestorautorepair

4 жыл бұрын

I don't think it has one ,, I done them the same way as this 2019

@carlosflores7064

3 жыл бұрын

No RCA -

@Bay_Area_john

3 жыл бұрын

@@carlosflores7064 you need audio control lc2i

I have a 2020 Camry SE. I was looking to make the sound quality better. Do you think changing the speakers is a better route or just adding a subwoofer? I'm looking for something simple and easy to do myself. Thanks.

@nestorautorepair

3 жыл бұрын

If your Cammy don't have the sound system , then yes you can start with a sub and then see if you need better door speakers

Thanks man! Make more videos 👍👍👍

@nestorautorepair

4 жыл бұрын

Thanks boss I sure will ,, thanks for your feedback

Hi I loved the video however I did have one question. I have a 2018 camry Se and was wondering if the process would be the same to tap into the back seat speakers?

@nestorautorepair

3 жыл бұрын

Hello yes same prossess

@ztoney38

3 жыл бұрын

Thats what i was planning to do. Curious why you tapped into the door speaker? Seems like more work than necessary, what was your reason?

@nestorautorepair

3 жыл бұрын

That will be the faster way boss

@nestorautorepair

3 жыл бұрын

You don't need to remove the door panel , I just did it to show the different on the wires

The output box that you put, would it be able to go to any speakers cables? If there some in the back where where it speakers goes.

@nestorautorepair

2 жыл бұрын

Yes you can connect it to any speaker

@games4life743

2 жыл бұрын

@@nestorautorepair thank you.

@nestorautorepair

2 жыл бұрын

You're welcome buddy

My rca adapter has a lot more wires and stuff then yours did could you help with what wire is what

@nestorautorepair

2 жыл бұрын

I don't really recommend those , why because you will need to add power and ground

Any problems regarding the mpg's after installation, because I'm having a 3700 graded @ two 40 amp fuses in my hybrid Toyota highlander?

@nestorautorepair

4 жыл бұрын

Mmm let's hope some one can help you with your question boss

@YuNggUZii23

2 жыл бұрын

lmao this has nothing to do with MPG

@nestorautorepair

2 жыл бұрын

Lol

I really appreciate your video, extremely helpful. Im having a few problems with the control wire not working, when i connect them to the left side of that fuse my key fob doesnt work, my dash flickers and it affect my car beeping for the doors being open, i tried reading other comments but i cant figure it out. Didnt know if you could lead me in the right direction. Thank you!

@nestorautorepair

4 жыл бұрын

Hello ok make sure where you connect your RCA box make sure you did connect them on the speaker wire not on the alarm wire,, also make sure you have a goo grownd if not is not going to work,, please let me know

@Poopshady

4 жыл бұрын

Nestor Auto Repair so after making a new ground, i was told that i need to ground switch

Gracias por el video tengo el mismo carro mismo año great video !!

@nestorautorepair

4 жыл бұрын

Que bueno gracias por el feedback

Hey bro do you know the cablee for the speakers wich is front and wich is back’s

@nestorautorepair

2 жыл бұрын

At the radio

Men muy bueno el video. Sabes el diagrama de los cables de audio de Camry 2022 SE

I have a question, I've installed a after market radio, 2 10" Sundowns and 2500w old school ssl amp running 4gauge wire for the positive and ground. Everything plays well but I keep killing batteries. I killed 2 and decided to remove them. Is there anything that I could be possible doing wrong? Or do I have to upgrade something to where my subwoofers don't kill my batteries? Please I need your advice

@nestorautorepair

4 жыл бұрын

Hello and yes what you need is a capacitor power and ground come into the capacitor and out to the amp, , if you don't have a capacity you will also kill your altenator, , best luck

@jonathanleos9898

4 жыл бұрын

@@nestorautorepair Will do. Thanks buddy 👍

@nestorautorepair

4 жыл бұрын

Ok thanks best luck

Does the door speakers still output bass with the subs

@nestorautorepair

3 жыл бұрын

Yes

This video was very helpful. One thing that I will mention to anyone using an Audio Control LC2i or above, do no add the left positive and negative signal to the left and right channels of the unit. When turning the unit up at high volumes it shorts and turns off. You will only use the left on left and if you want a right signal be sure to follow these same steps for the passenger side. I believe the right positive is purple and red and the negative is purple and green.

@nestorautorepair

2 жыл бұрын

Thanks boss

@codylee1682

2 жыл бұрын

I ordered an lc2i pro. I haven't hooked it up yet. Thanks for the info

@nestorautorepair

2 жыл бұрын

You're welcome boss

@dakotamitchell6609

2 жыл бұрын

Do I have to use a lc2i?

@nestorautorepair

2 жыл бұрын

No you don't

Very good video. Any videos where show how the wire looks like before you put the fuse back in the box?

@nestorautorepair

4 жыл бұрын

Thanks for your feedback,, I delete all the video I had sorry

So I did this but I connected it to a 10 amp fuse would that make a difference

@nestorautorepair

2 жыл бұрын

Well just make sure when car is off that fuse is also off

did you ever do aftermarket upgrade 2019 toyota camry with the jbl system? thanks for the video, i know it very hard working and holding the camera at the same time.

@nestorautorepair

2 жыл бұрын

Yes I had

@bobit8742

2 жыл бұрын

@@nestorautorepair is that 4 gauge power wire? you think 0 gauge will fit that hole?

@nestorautorepair

2 жыл бұрын

I believe it was 8G but yes there is room for any wire

I need to run 2 #8 wires from the battery to the trunk for my Ham Radio. This was helpful, thanks

@nestorautorepair

4 жыл бұрын

Your welcome thanks for your feedback

Do I need to remove the parking brake to get the the grommet on the firewall or should I have easy access to it?

@nestorautorepair

4 жыл бұрын

Well not really,, just poke the seal

@samuelperez310

4 жыл бұрын

@@nestorautorepair Ok cool. This might be the best straight to the point video i've seen. Thanks for posting!!!

@merdith6

4 жыл бұрын

It's hard to see that grommet

@nestorautorepair

4 жыл бұрын

Your welcome thank for your feedback

@nestorautorepair

4 жыл бұрын

Yes that's why you need a long coat hanger

Would this be similar to a corolla install

@nestorautorepair

4 жыл бұрын

I'm sure it will be very very close the color on the wires maybe different , but same process

I have a question since you seem to know more About electrical... i install the fog lights on my camry but I conected the positive directly to the battery meanning if i have the fog lights on and i park and turn off the car my fog will stay on ,, now my question is .. if i conect the posistive to the lighter fuse will it work instead of having the positive conected directly to the battery ?? Please help

@nestorautorepair

4 жыл бұрын

Sure it will work just get a fuse that's only hot when engine is running or hot only when key is on the ON position,, that way Everytime car is off fog lights are off ,, as long your for light have a fuse you be ok on any fuse or relay

@ErickGarcia-gn6ge

4 жыл бұрын

@@nestorautorepair thanks so much brother i will try that now

@lambertleigh2452

4 жыл бұрын

Depends if u want it on when u want with a switch...or...connect to an ignition wire so it comes on when key is started....

@markusray319

4 жыл бұрын

Erick Garcia did it work?

6:00 is all I needed

@nestorautorepair

3 жыл бұрын

Yes

How should I tap into my speakers using a LC2i pro?

@nestorautorepair

2 жыл бұрын

kzread.info/dash/bejne/pnaercqodqe5hdI.html

Did the subs work well with factory radio?

@nestorautorepair

7 ай бұрын

Yes sir

Very detailed instructions. I like.. Thanks for the post.

@nestorautorepair

5 жыл бұрын

You got it boss,, thanks for the feedback

Hola, como se llama y donde puedo comprar el adapter, por favor y gracias.

@nestorautorepair

4 жыл бұрын

Oh si hola,, si vives en los estados unidos,, lo puede comprar en Walmart c llama RCA output rover.ebay.com/rover/0/0/0?mpre=https%3A%2F%2Fwww.ebay.com%2Fulk%2Fitm%2F191721798898

Tengo un 22 xse v6 con sistema jbl la señal se puede agarrar del bajo ?

@nestorautorepair

2 жыл бұрын

Si se puede

Is the process the same for a 18 carolla ?

@nestorautorepair

2 жыл бұрын

Yes

Anyone know how can i run power wire on a corolla 2018. Cant find a gromet to do it.

@nestorautorepair

2 жыл бұрын

Check passenger side

I went through the same grommet on mine I put a little lubricant in the power cable and it was much easier pulling the wire through.

@nestorautorepair

4 жыл бұрын

Yes thanks for sharing for others

@johntarzan5287

4 жыл бұрын

I did the same and couldnt fine the wire poking though the fire wall

@johntarzan5287

4 жыл бұрын

@@nestorautorepair do you have to push through the fabric

@nestorautorepair

4 жыл бұрын

Is all the way up there keep looking

@nestorautorepair

4 жыл бұрын

@@johntarzan5287 lift the fabric and you will see the ruber seal

For anyone doing it on a Camry i found it easier to remove the battery and pull the rubber grommet back and feed the wire through

@nestorautorepair

3 жыл бұрын

Thanks for sharing

@eatmyturdd6697

3 жыл бұрын

This is one tough cookie. So hard to get through that grommet

@eatmyturdd6697

3 жыл бұрын

Did you pull it back with your hand?

@nestorautorepair

3 жыл бұрын

Yes it is but you can do it

@infessible2190

3 жыл бұрын

@@eatmyturdd6697 I was careful and used a knife to make a slit because I didn’t want anything to get through the grommet. I also bought a fuse holder to run my remote from the auto store it was just a couple bucks and it has one male end that fits into the electrical port for your cigarette lighter outlet and there is two fuse spots I did that to be safe

Your the best 👌

@nestorautorepair

Жыл бұрын

Thanks boss

So far one of the best videos about subwoofer installation for the XV70 camry

@nestorautorepair

11 ай бұрын

Thanks boss

Hola amigos buen videos tengo un Corolla 2020 se por casualidad tú sabes el colores de los cables de altavoces traseros quiero hacer lo que tu hiciste con mi Corolla gracias

@nestorautorepair

4 жыл бұрын

Hola brother Por el momento no sé el color me quedaron de traer uno pero nunca me la trajeron.

@luisportillo9071

4 жыл бұрын

Nestor Auto Repair ah ok brother gracias por responderme donde están ustedes ubicados ?

@nestorautorepair

4 жыл бұрын

de nada, yo aqui en ( sterling va ) y tu?

Ground need to be on the chachis of the car and need to be sanded out to remove paint so you have a clean connection

@nestorautorepair

4 жыл бұрын

Correct ,, had no problem with all the one I done same spot ,, but thanks for sharing

Nice!

@nestorautorepair

4 жыл бұрын

Thanks for the feedback

My rca converter has two ground wires, do I need to use both?

@nestorautorepair

3 жыл бұрын

Yes both

@matthewsanchez9572

3 жыл бұрын

@@nestorautorepair I’m having some issues, everything is working fine but I get constant humming when my doors are closed, any help?

@nestorautorepair

3 жыл бұрын

Mmm the game only thing that can think is that one your rca is making contact to the car

Will this apply to 2020 Camry with "premium" audio package also?

@nestorautorepair

Жыл бұрын

Yes

@PotatoeChipz

8 ай бұрын

Not for the signal. Colors are different and it's advised to tap into the output harness on the JBL amp.

How many feet is the wire ? I was thinking or ordering 10 feet cable wire

@nestorautorepair

4 жыл бұрын

Hello you need 16 feet

@Bay_Area_john

4 жыл бұрын

@@nestorautorepair awesome thanks a lot

Get the audio control LC2 trust me it sounds better than those budget passive LOC. I had the scosche loc2sl it sounded nice but then I upgraded to LC2 and damn my amp came alive it sounds way better since it has better voltage

@nestorautorepair

4 жыл бұрын

Gracias

@adrianbucio3650

4 жыл бұрын

LC2i is the way to go.

@adrianbucio3650

4 жыл бұрын

julio bello is your lC2i connected to the back or front speakers

@juliobello4561

4 жыл бұрын

Adrian Bucio i have it plug to my front speakers. Don’t plug to rear since the rear channels have less volume because all factory stereos have this front stage thing

@adrianbucio3650

4 жыл бұрын

julio bello. Thanks for your input I’m bringing my car for install tomorrow. So I’ll definitely let them know how I wanna it done. What system is in your car.

Hola mi ermano tu saves cual son los positivos y negativos tengo un Camry 2019 le y los colores k tengo de bisonas son rosa y morado ?? Gracias para la parte de enfrente

@nestorautorepair

3 жыл бұрын

Hola brother ponle un test light y pon musica El positivo the dara Luz El en test light

@soundtech2312

3 жыл бұрын

Muchas gracias

@nestorautorepair

3 жыл бұрын

Dale de nada

@soundtech2312

3 жыл бұрын

Nestor Auto Repair hey bro lo Cale el tester pero los 2 prenden k.ago

@nestorautorepair

3 жыл бұрын

Oh es que tiene que usar un multi miter

just used a clothes hanger? or is there something stiffer you can buy to snake?

@nestorautorepair

Жыл бұрын

This will work

@parall4x

Жыл бұрын

@@nestorautorepair thanks for this bro. fastest i’ve ever gotten thru a firewall. wired a trailer harness on my TRD today

@nestorautorepair

Жыл бұрын

You're welcome boss thanks for your feedback

Cant you just get a adaptor for the factory line that converts it to positive and negative. From there you use the + and - to RCA. Then from AMP new speaker wires?

@nestorautorepair

4 жыл бұрын

Not that I know off

@jamesriddle7793

4 жыл бұрын

If you don't want to cut up the factory wires you could use any kind of splice connectors *posi taps* are a preferred brand. An alternative is the add a sub wiring harness from tacotunes.com that plugs into the connector at the back of the radio and gives you wires with rear speaker signal to use to connect to the LOC

@jamesriddle7793

4 жыл бұрын

kzread.info/dash/bejne/kWdtqpKbktu5c6w.html

@jed8565

4 жыл бұрын

@@jamesriddle7793 Thanks man, your the best!

@nestorautorepair

4 жыл бұрын

Thanks boss ,, thanks for your feedback

My amp isn't turning on. Do I need to use the remote port to turn on the amp. I'm using an lc2i pro

@nestorautorepair

2 жыл бұрын

Ohh I see

@nestorautorepair

2 жыл бұрын

There are video that will show you . This will be hard over text

Why didn’t you just pull the head unit and get your preout inputs from there? Much easier?

@nestorautorepair

4 жыл бұрын

The owner dint want me to remove it

Does it rattle? My Camry rattles everywhere especially in the trunk and dashboard.

@nestorautorepair

4 жыл бұрын

Yes you need to add Dynamite

@IeffedUrMom

4 жыл бұрын

@@nestorautorepair You'll have no rattle at all after that, because you will have blown up your car, lol!

@nestorautorepair

4 жыл бұрын

Lol I work on people cars my is a blue Ford fusion lol,, yes cars this day is all plastic that's what all the rattler

The best place to ground your amp is under the back seat on the left side or right side that is not a good ground on the upper rear deck on the 2018 through 2020 Camry. The output on the stock head unit puts out a very weak signal on the rear channel, you have to tap into the front speakers right and left not from only one side, run a lead from front left positive and negative and front right positive and negative that way your fader works correctly. to find you're positive and negative for right and left use a multimeter, it is very easy. don't go by the digrams out there they are not accurate, they have not come ut with the correct wire diagram for 2018 through 2020 Camry yet.

@nestorautorepair

4 жыл бұрын

Sure thanks for your tips

@adrianbucio3650

4 жыл бұрын

Michael Anthony how do you know about the back speakers don’t have a strong signal

@Michael_Anthony05

4 жыл бұрын

@@adrianbucio3650 I used the rear and the front on my line out converter and you can see a difference in the bass. It hits harder using the front left and right. It has to do with the stock head unit and the factory eq curve. But if you use the rear left and right for aftermarket door speakers you get better sound quality from your mids and highs. It has to do with the factory eq curve on the rear speakers. Try it and you will see what I’m talking about.

@adrianbucio3650

4 жыл бұрын

Thanks man. My car is going to a car audio shop for install. And I’m gonna ask them about it and if they don’t know I’m gonna request to be done how you told me. And are you using the lC2i converter

@Michael_Anthony05

4 жыл бұрын

@@adrianbucio3650 I was using the lc2i, I am using a dsp now to get rid of the factory eq curve because I want that clarity and good mid bass from my door speakers. With the lc2i I was getting crappy mids and highs because taping the front speaker is only good for the subs because of the factory eq. if you are only going to run door speakers tap into the rear it has a better eq curve for mids and highs or just run two lc2i’s one for the front and one for the rear. I don’t know what Toyota was thinking with that factory eq curve. Make sure they use a scope or a smd dd1 to tune your system; most places do it by ear. I purchased a smd dd1 and the cc1 to tune my system.

its weird because i put my remote turn on wire on the left side of the fuse 15A and my amp doesnt turn off when i turn off my car, is that normal?

@nestorautorepair

3 жыл бұрын

Mmm no that's not normal are you sure is not touching the other fuse?

@apexbeats8443

3 жыл бұрын

@@nestorautorepair okay i adjusted the wire and now its working💯thanks

@nestorautorepair

3 жыл бұрын

Your welcome boss

Thank you

very nice.

@nestorautorepair

2 жыл бұрын

Thanks

Were is your shop at how much would you charge for the same exact work on my Toyota?

@nestorautorepair

2 жыл бұрын

Yes sir I'm in Sterling va $120

@silviocorea5920

2 жыл бұрын

Sterling California ? Antioch or were exactly if you don't mind me asking

@nestorautorepair

2 жыл бұрын

Sterling Virginia , next to Dallas airport

when he tried to open the trunk 🤣

@nestorautorepair

2 жыл бұрын

Right

Currently have a 12in sub installed In my 2018 Camry and i'm trying to find whats making the rattling noise in the back of the car when playing music. Anybody have any idea?

@crazytech5755

4 жыл бұрын

It's the shity rear speaker plastic cover. That long grey cover in the back of your car. It's really flimsy. It rattles against the windows, and shakes like crazy. Also the license plate, put some doubel sided tape behind it, all behind it so it doessn't rattle. Also for the trunk buy these. Put just a few pieces on the inside (remove the fabric shit, put it back when done.) www.amazon.com/Noico-deadening-Automotive-Insulation-dampening/dp/B01KZ5X7KO/ref=sr_1_2_sspa?crid=9WPKTXEJW6CI&dchild=1&keywords=sound+deadening+mat&qid=1593385477&s=electronics&sprefix=sound+deade%2Celectronics%2C131&sr=1-2-spons&psc=1&spLa=ZW5jcnlwdGVkUXVhbGlmaWVyPUFQVzNHNjdCWFFNQkwmZW5jcnlwdGVkSWQ9QTEwMjM3MzAxVFoyN0tOUFRRSjdXJmVuY3J5cHRlZEFkSWQ9QTA0MzU4NzUzVVM1VThMVTlVWDM2JndpZGdldE5hbWU9c3BfYXRmJmFjdGlvbj1jbGlja1JlZGlyZWN0JmRvTm90TG9nQ2xpY2s9dHJ1ZQ== So, get these, put them under the back plastic piece, and the sides pannels. Also put some foam where the piece may touch the window. Line your trunk, and put doubel sided take on the license plate, or this same shit. Enjoy.

@danielcastaneda3017

4 жыл бұрын

David Boggs by any chance do you have pictures of the trunk after you put the insulation in? Just so I can see how you did it

@MyaThoo

3 жыл бұрын

@@crazytech5755 does this completely get rid of the rattling

How do u get past the miswiring code it throws?

@nestorautorepair

3 жыл бұрын

I did show it how to do it , pock it and fish a line in them attach your wire to it and pull it

Also for anyone that does not have wiring schematics white and green is negative on the right side blue and pink is positive

@nestorautorepair

2 жыл бұрын

Thanks

I just want to add my experience I also agree with the person that commented go ahead and run some speaker wire from the right side to that converter you get way better sound quality out of it if you go the extra mile also it is unnecessary to ground to a ground wire on the 18 and 19 there is a bolt right above where he’s working that will suffice as a ground do not tap into the alarm wire it’s black and yellow I swear if you tap into that wire you will never get your lock and unlock right again

@nestorautorepair

2 жыл бұрын

Thanks for sharing boss

@aarongarza225

2 жыл бұрын

I used a different loc on my 2020 camry le and for some reason when my car is off my amp stays on and when I close the driver rear door my subs thump and also when I tap on the side panel where my loc was installed , would any of you be able to help with some info??

@nestorautorepair

2 жыл бұрын

Yes you need to add tape to the RCA connection there at the panels .. you need to connect the amp blue remoter wire to a fuse that’s off key off ON key ON

@aarongarza225

2 жыл бұрын

@@nestorautorepair thanks alot will try that tomorrow

@nestorautorepair

2 жыл бұрын

Yes sir

Could this process work for a 4channel amp for my doors ?

@nestorautorepair

4 жыл бұрын

Yes

@nestorautorepair

4 жыл бұрын

Yes you just need a splitter for your RCA

@alejandrozambrano5568

4 жыл бұрын

Nestor Auto Repair well i am going to connect the rca to an 7band equalizer and then send the rca to my 4channel amp and subwoofer amp. Does this work ?

@nestorautorepair

4 жыл бұрын

Yes it will work but you still need a splitter at the amp

@nestorautorepair

4 жыл бұрын

For the amp to work you need the 4 RCA to be connected

Why is your negative terminal not disconnected!? Hopefully that ground is bare metal.

@nestorautorepair

4 жыл бұрын

Hey thanks for your concern , but this was a bran new car I believe it was 2 weeks old when I did this so one this car been so new if I disconnect the battery and then the radio get lock/block then more work for me ,, two you don't need to disconnect the battery to do a sound system , that's your choice,, the system still working like day one ,, this is not the first sound system that I done , but like I say if you want to put everything out of wack got for it

Hi got my amp installed but I connected the blue wire to the fuse like you said and now it can’t detect my key and constant power left side or right side ? My Camry is a XSE

@nestorautorepair

4 жыл бұрын

I don't clearly understand but here is my question check at the amp and make sure you got good growd and power on red and the blue,, and let me know

@nestorautorepair

4 жыл бұрын

I have done 5 Camry just like this and all work,, make sure you follow my video good

@dalej1923

4 жыл бұрын

1NITIDO I have the amp works and all just for some reason the amp stays on and when I close the door my key fob doesn’t work and says Key Not Detected . The blue wire is connected to the left side of the fuse power outlet 15a blue fuse like you said . I tried the blue wire on the right side does the samething . When I remove the blue wire Key Fob works !

@nestorautorepair

4 жыл бұрын

Mmm that's estranged what year is your camrry?

@dalej1923

4 жыл бұрын

1NITIDO 2019 XSE

Buen video me motivaste a ser el mío

@nestorautorepair

4 жыл бұрын

Dale gracias

Was it easy getting through the firewall on the 2018 camry? I've been trying for the past hour and half

@nestorautorepair

3 жыл бұрын

Yes very easy

@etzelwilliams5752

3 жыл бұрын

@@nestorautorepair mannnn it took me 2.5 hours to get through the firewall 😫😫 but I was able to get it through because of your video. Thanks

@nestorautorepair

3 жыл бұрын

Wow lol thanks God you got it ,, thanks for your feedback boss

@winningsince85

3 жыл бұрын

I went to the hardware store and bought a long screwdriver for 5 bucks and made it work. Also I took the small plastic cover in the door jam to easily see where it was coming from.

@nestorautorepair

3 жыл бұрын

Nice!! Thanks for sharing

My amp won't turn off. I wired in the remote wire the same way you did, and I even tried the other 15a fuses. I tried both sides too. Idk what to do

@antoniolemus1117

Жыл бұрын

Mine either and the stereo won’t turn off either did you figure out the problem

@elementzyg9309

5 күн бұрын

@@antoniolemus1117Did you guys figured this out?? I’m having the same issue

Is there another fuse I can use? I am already using that fuse for my aftermarket fog lights

@nestorautorepair

3 жыл бұрын

Yes just test a fuse that will go off when key off

@FarFrom_Puken

3 жыл бұрын

@@nestorautorepair the only other 15amp fuse in that box is the radio fuse. I havent checked to see if it's on the accessories. But I cant image its not

@nestorautorepair

3 жыл бұрын

Oh ok if not then change the one you have your fog to a 20amp and put both there

@djacemoney2449

3 жыл бұрын

I just installed fog lights too...was wondering which set did you get..? I have an install question..

@nestorautorepair

3 жыл бұрын

I did a sound system not fog lights ,, but ask me your question I may have an answer for you