2021 Toyota Camry XSE Amplifier and Subwoofers Upgrade!!! Big Ba Da Boom!!! 😎
Жүктеу.....
Пікірлер: 11
@enosem1 Жыл бұрын
Show how you put the spoiler
@captainredmanz10 ай бұрын
Can you make a video explaining the wire harness you used to connect factory radio and where you hooked up the lc2i?
@TheDowPad369
10 ай бұрын
I had Bestbuy install my original input converter so the warranty wouldn't be voided on the car. I know that all they had to do was connect a speaker wire to the subwoofer speaker wire coming out of the factory amplifier under the driver's seat. When I upgraded to the LC2I I just used the subwoofer speaker wire that Bestbuy tapped to the oem subwoofer speaker wire. I coupled 2 wires to the positive subwoofer speaker wire and 2 wires to the negative subwoofer speaker wire. Connect those to the left and right speaker wire terminal inputs of the LC2I Converter. Then run a small jumper wire to your aftermarket power amplifier for the Positive and Ground wires. You can run a remote power wire if you want to, but you don't have to. There is a removable jumper on the LC2I to use the speaker wire inputs as the remote turn on. I have the upgraded JBL system with a subwoofer.
@jeromelee40985 ай бұрын
Where did you get all the carbon fiber accessories in your camry
@TheDowPad369
5 ай бұрын
eBay, AliExpress, and Amazon.
@zeeshanhaider5933 Жыл бұрын
did u end up changing your battery or alternator at any point for higher output?
@TheDowPad369
Жыл бұрын
I didn't upgrade anything. The amplifier that I'm using is only 1500 watts RMS, and I used 4 Gauge wire for power and ground. Each subwoofer is rated at 800 watts RMS. THE LC2I converter definitely adds a lot of extra boost without drawing a lot of extra electrical current. I'm very pleased with the amount of bass and the sound quality. The lights aren't dimming either while driving. 🤓
Пікірлер: 11
Show how you put the spoiler
Can you make a video explaining the wire harness you used to connect factory radio and where you hooked up the lc2i?
@TheDowPad369
10 ай бұрын
I had Bestbuy install my original input converter so the warranty wouldn't be voided on the car. I know that all they had to do was connect a speaker wire to the subwoofer speaker wire coming out of the factory amplifier under the driver's seat. When I upgraded to the LC2I I just used the subwoofer speaker wire that Bestbuy tapped to the oem subwoofer speaker wire. I coupled 2 wires to the positive subwoofer speaker wire and 2 wires to the negative subwoofer speaker wire. Connect those to the left and right speaker wire terminal inputs of the LC2I Converter. Then run a small jumper wire to your aftermarket power amplifier for the Positive and Ground wires. You can run a remote power wire if you want to, but you don't have to. There is a removable jumper on the LC2I to use the speaker wire inputs as the remote turn on. I have the upgraded JBL system with a subwoofer.
Where did you get all the carbon fiber accessories in your camry
@TheDowPad369
5 ай бұрын
eBay, AliExpress, and Amazon.
did u end up changing your battery or alternator at any point for higher output?
@TheDowPad369
Жыл бұрын
I didn't upgrade anything. The amplifier that I'm using is only 1500 watts RMS, and I used 4 Gauge wire for power and ground. Each subwoofer is rated at 800 watts RMS. THE LC2I converter definitely adds a lot of extra boost without drawing a lot of extra electrical current. I'm very pleased with the amount of bass and the sound quality. The lights aren't dimming either while driving. 🤓
What paddle shift extenders are you using
@TheDowPad369
Ай бұрын
www.ebay.com/itm/186370173521?mkcid=16&mkevt=1&mkrid=711-127632-2357-0&ssspo=q7r6-r3cqwe&sssrc=4429486&ssuid=NvLNd_6vRpe&var=&widget_ver=artemis&media=COPY
Did you keep the factory jbl door speakers?
@TheDowPad369
Ай бұрын
I kept the factory speakers for now. Changing them will void the factory warranty.