Great work. I simplified mine by putting the amp under the drivers seat and the line out converter in the drivers side B pillar. Saved a ton of time, money and effort.

I've went oh the JL Fix 86. Works wonders. Had a shop offered me that option to keep my stock head unit.

Very interesting, never seen anything like that bass hub. Thank you for the video!

Even though I'm old and got sea sick watching this, it's full of great info, thank you!

@SEsGarage

Жыл бұрын

Sorry about that! But I’m glad it helped you

I always use a spare battery that I connect my positive and negative to. I keep my inline fuse in the back so that away I can put my wire loom on the red positive cable and it looks OEM.

9:50 was genius! I like the way you think brotha. Subbed !

First I want to say thanks for the video ...and you did a good job it's fun to do your own work and take pride in your work ...one thing that I would highly recommend is don't use a wire coat hanger because you can do damage with it ....buy you a fiberglass rod for future work and thank me later lol

Thank you sir.

Any advice on how to remove the fixed backseat? The rattle that I get in the rear deck is super bad and I can't figure out how to remove the backseat to put some sound deadening in it

Great video this is respectful

Bravo!

That JBL bass unit is a nice stealth fit, but once you have a ported 12 inch sub its hard to go back!

U da man bro. Plan for my 22

@ProdJMO9

10 ай бұрын

Same. Did u get it done to urs? I have a 22 asw

FYI just used the Taco tunes harness with the LC2 and didn’t use jumper wires. Speaker level inputs failed to turn on the amp but the remote wire worked. All good with dual 12s.

@Evangilizer

2 жыл бұрын

Where did u plug the remote wire in?

@vladimirakst7009

Жыл бұрын

@@EvangilizerThe head unit speaker's connector name is 9098012C39 (10-pin black). The easiest way to get a remote wire is to connect it to USB

@TheBoogieMan25

3 ай бұрын

Where do the 2 wires from the harness go into the lc2i

Did you run an extra power line for the audio control?

Can I use a different line output converter? I had one sitting around from a previous car

Hi did the ground connection work on the stock sub bolt??? Obviously it did😅 but wanted to ask before I do mine😂

Can you provide link for the factory head unit jumper cable?

Love your videos, awesome! I have the same car you have but a 2024. I'm trying to find the correct harness for the head unit to install a subwoofer and amp. Your feedback is appreciated?

Is there a video of just the sound of the sub speaker

Trying to run my power cable to my sub got through one side of rubber boot on the driver side can’t get through the other side any suggestions? Afraid I’m going to damage the wiring harness with too much handling

Hello. Did the headunit have distorsion? What volyme level? Thene? And did the headunit have bassrolloff? What volyme level did it start?

Link for the taco tunes harness plz

When you switched out the JBL for the new one you replaced it with in a newer video, how different was the installation? Or was it all the same minus where you placed the speaker?

@SEsGarage

2 жыл бұрын

Everything is the same minus the sub location

Do you have factory jbl?

I’m not sure where I messed up my wiring but I can’t get my amp to run my subs. I have LC2i pro. I have mine wired up the same except I tapped into both the left and right rear speakers. I even tried to use the subwoofer out RCA from the lc2i pro to the RCA’s on my kicker amp.

@SlamryCamry19

5 ай бұрын

These Camry's are smart everything I have had nothing but problems electrical wise I got mine working but I used a fuse tap and put it in an empty spot in the fuse box that turns on and off with the car and haven't had a problem since I will say this though if you are going to run anything more than 1200 watts rms you will need to upgrade everything to 0 gauge big 3 and look into some type of super cap like the ioxus ultra cap battery or a lithium battery that charges at 14.0 volts max I have literally upgraded everything in the car except the alternator I have a 74AH Lev60 pro V2 from jag35 as my battery and the ioxus ultra cap feeding directly to the amp and only after upgrading everything now my kicker CXA 1800.1 is seeing rated power but it cost me a lot of money to get there because of the PCM controlled charging system regulated at 13.8 volts where almost every amp you see is rated for 14.4-14.8 VDC and to answer your question even with tapping the rear speakers like you did I still had to have a remote turn on for the LOC in order for the remote out for the amp to work properly

He were you got the harness and what the part #

That amp makes more than 600, I run it. It was tested at almost 1000

I been looking all over to I upgrade factory speakers now I’m looking wire harness to add amp can u send me the link

Do you have the link for the wiring harness you purchased from taco tunes

How about a video about the strut tower brace installation?

@SEsGarage

2 жыл бұрын

The TRD comes with that rear brace from the factory, I do have a video up on the front strut tower

Did you find a harness that works with the factory head unit or are you gonna have to splice into the factory wires

@vadimvarkentin3120

2 жыл бұрын

Tacotunes sells one that connects to the head unit, it’s like $40

How did you wire your twisted pair of + and - wires to your single pair of speaker wire from the amp? Trying to run similar setup with the basshub stadium and trying to figure out that connection between the one strand and two to the sub

@SEsGarage

10 ай бұрын

Both positive twisted together. Both negative twisted together. Into one channel of the amp

Are you running your rca cables just from the LC2i to the aftermarket amp?

@SEsGarage

2 жыл бұрын

Correct

I was going to get the taco tunes wire harness but only one channel tapped into for the sub channel is not normal. That works for 99% of the produced music out there, some rare live recordings will have stronger bass in the left or right channel only. So depends on what you listen to I guess.

@SEsGarage

6 ай бұрын

I ended up tapping the other channel to have both channels going to the LC2i

@practicalguy973

5 ай бұрын

@@SEsGarage Good I would do the same. The LC2i would be normal to use both channels. I like keeping the power balanced rather than half hooked up and cranking the gain higher to make up for it.

Loved the video! I have a 2023 Camry with the stock radio and would like to upgrade it.....problem is I'm in my 60s with health issues.....Can the Toyota dealer do any upgrades to my car ( reasonable....under 1k) ? I love my car but the stock stereo is very lame......

@mafosa9563

9 ай бұрын

the magics in that audio control lc2i or the one with bass management. the stock head unit doesnt put out enough signal. that lc2i will add up to 6volts if i recall. that would go into a external amp. matching its max input (probably 5 volts) and you can change how early the voltage rises (volume sound). also that harness he added to the tweeters. you can jump into those wires for your subwoofer. rear doors are a lost cause. there just "fill in" and some door sound dampening will really help. hardest partis. fishing that amp wire through the firewall. try to do it in sections. one day just run your power wire and mount the amps. couple days later swap out your rear door speakers and ad door treatment. couple more days later use all weekend to swap out front door speakers, tweeters and run all your wiring. couple days later, do all the tuning. sometimes i do things like that... larry

Nice how u did your remote wire these Camry don’t hv remote

@SEsGarage

Жыл бұрын

The LC2i provides the remote signal to the amp

Two questions- why not just send the power wire through a drain plug in the spare tire pan and then run the wire on the outside of the car up to the battery, That's how I did these 20 years ago. Second doesn't the JBL basshub have a 200 watt amp already integrated? 3rd is the wire harness for the JBL system sub still in the car even though you don't have the JBL system?

@MrSneakyGunz

6 ай бұрын

The BassPro Hub has the amp, and is 200W RMS. This one is passive and can handle 600W RMS.

Do you remember where the rubber gromet was on the inside of the car? I am trying to do this in my 23 Camry and cannot for the life of me find the inside gromet.

After you installed everything, have you had issues with any of the doors unlocking by themselves after locking the car?

@Adalemex863

Жыл бұрын

Just changed out my door speakers and this happened to me took it back apart all it was was the wire that hooks to the locking mechanism it fell off the guide.

i have a very specific problem and i would like too see if u could help me out, i have a toyota Camry 2021 XSE i have no experience with audio systems but ive always been a fan on my birthday a few months ago some friends bought me a full system and we got it in stalled i got the kickr comp R dual 12 set up with a kicker 2400w max 1200w rms cxa1200.1 got other cables and such that i needed i believe 4gage amplifier wire, and i got everything installed and everything was cool could play my music sounded good and everything i also want to note i have a gain controller which i have never maced out or put more than 60% of the way up to ensure i never blew and speakers, so after about a month of having the speakers playin music casually one night im driving and and the audio cuts out and i cant hear anything i try to turn the volume up and down and nothing shows up on the displays i was confused unplugged my phone thinking it was a apple car-play problem and pugged it back in and nothing no audio music is still playing my car is just not playing any audio i have to restart my car multiple times to get my music to play it happens randomly and at first i was told could be a over heating issue, but it doesn’t make sense because i can wake up to go to work and turn on my car and the music wont play and the car hasn’t been running im over 12 hours and nothing no audio and sometimes it works for days but then will randomly start cutting out again, i need help i am not sure what is the problem and i would like some help

@ProdJMO9

10 ай бұрын

U figure it out? Any updates?

The Taco harness, that's required for any installs with amp/line output converter?

@SEsGarage

2 жыл бұрын

Not at all, you can easily wire it yourself but the harness makes it so you don’t need to mess with factory wiring

@sindelm7437

2 жыл бұрын

@@SEsGarage so without it, I'd have to splice into the original harness? Trying to get everything I need before install. Going with LC7i and a 5 channel amp for front and rear door speakers, and a sub

How did you remove the dash to gain acces to the factory harness for the sub output

@SEsGarage

Жыл бұрын

I have a video up on removing the radio to gain access. Check it out

@Ninija96

Жыл бұрын

Thanks

Mine have a jbl system xse v6 22 from were can I tap the signal also have lc2i pro tia

@PotatoeChipz

9 ай бұрын

Front left speaker wires at the JBL amp under the driver's seat. Output harness (has thicker wires than the input harness): Light Green + PIN 13 White - PIN 28 Wouldn't recommend tapping into the sub signal because it seems crossed around 60hz (sub bass only).

Should’ve went sundowns😊

If the subwoofer somehow gets damaged, do you know if JBL sells the actual driver separately?

@SEsGarage

Жыл бұрын

I’m honestly not sure, as I’ve since returned the unit and went a different route

My reverse camera isn’t coming on after installing subwoofer and amp with tacotunes harness

@SEsGarage

Жыл бұрын

Double check your install. Make sure you have all the connections connected behind the radio. The harness that you’re tapping into with the tacotunes harness isn’t the camera harness

Hey boss, loving the videos! I know you got rid of the Camry but would you still recommend this set up? I replaced my speakers but still lacking in the bass department. Just curious to see if you would still recommend running this set up or look into something else? Thanks in advance!

@SEsGarage

6 ай бұрын

DO NOT use the bass hub! I didn't like the way it sounded at all. If you look at my later videos I ended up going with a Kicker wedge style box and it worked fantastically!

@Adam__B

6 ай бұрын

@@SEsGarage Hey, thanks for the update! Did everything else stay the same? Just changed the sub? I’m inclined mechanically but I have no idea when it comes to working with audio… 😅

@SEsGarage

6 ай бұрын

@@Adam__B yes the rest of the setup was exactly the same, just different sub

@Adam__B

6 ай бұрын

@@SEsGarage Alright! Thanks! I’m thinking about doing this, as the speakers are good now, just literally no bass. I think a sub and amp will complete the setup. Thanks again!

@Adam__B

6 ай бұрын

@@SEsGarageAlso did you end up leaving it running from the rear channel or changing it to the front?

How did you get signal to the amp?

@SEsGarage

Жыл бұрын

The LC2i provides it via signal sensing

How did that wire harness from tacotunes do? Im thinking about getting that one

@SEsGarage

Жыл бұрын

Worked well!

@subiyota

Жыл бұрын

@@SEsGarage damn ok i just dont know about the 2 cables and being jump wired like that? do you lose any features? Like fade?

@SEsGarage

Жыл бұрын

@@subiyota no you don’t lose fade or anything. It’s only used to give a signal to the subwoofer amp

@subiyota

Жыл бұрын

@@SEsGarage what about when you install a 4 channel amp?

@subiyota

Жыл бұрын

@@SEsGarage those 4 speaker wires would be useful to run a amp to the speakers.

Where do I get the harnest for the oem radio that goes to the line output converter??

@SEsGarage

11 ай бұрын

I have one I can sell you. I just took my stereo out of the car. Let me know

@amazingwireless2

11 ай бұрын

​@@SEsGaragewhat else you got for sale?

@SEsGarage

11 ай бұрын

@@amazingwireless2 for the Camry? I have the line out converter, the fitcam dash cam for 2021+ cars. And I have the front and rear door speakers and adapters I used

I cant find that grommet to pull the wire through. There wasn't enough light to see where you were pulling through

@douglashoag122

2 жыл бұрын

Tj it’s behind a rug easy to pull down and put back up. Top left.

@TJsVette

2 жыл бұрын

@@douglashoag122 all good I went through the one on the passenger side, it was so much easier to get to. Ill finish up tomorrow and can't want to have some bass back in my ride.

@TJsVette

2 жыл бұрын

Thanks for replying!!

What do you think about adding this is to compliment the stock jbl system ?

@SEsGarage

Жыл бұрын

That install would be even easier, as all you’d need to do is tap right into the JBL subwoofer

Where did u plug the remote wire in?

@SEsGarage

2 жыл бұрын

To the LC2i

@Evangilizer

2 жыл бұрын

From where? The head unit? If so do you splice in? I currently am trying to reproduce this setup with a 22 camry. Have everything you have, i have remote out going from the l2i to the amp. What about remote in on the l2i?

@SEsGarage

2 жыл бұрын

@@Evangilizer the LC2 doesn’t need remote in its signal sensing. Just be sure to have smart turn on enabled

is that 10" cutout on the rear deck a place where you can mount a boxless subwoofer?

@SEsGarage

Жыл бұрын

That where the factory JBL sub would be mounted if you had a JBL equipped vehicle

@PolkStreet44

Жыл бұрын

@@SEsGarage thanks!

@user-rp6yo2mv7o

Ай бұрын

@@SEsGaragecan you mount one there yourself if you don’t have the JBL audio in it

Where is everyone mounting amp at?

@SEsGarage

2 жыл бұрын

I covered where I mounted mine in this video

@sindelm7437

2 жыл бұрын

@@SEsGarage thanks for the response! I saw that. Looks clean! I was seeing if anyone else had it somewhere else.

@donovandeponte8187

2 жыл бұрын

i mounted my highs and mids under my seat and my sub amp is attached to the backseat

There is no way i would oonly use one input channel

its bored

I DO NOT INSTALL ANY CAR AUDIO WITH A AFTER MARKET HEADUNIT PERIOD. FAILURE TO UNDERSTAND WHY THAT IS IMPORTANT WILL RESULTS IN MIX MATCH SOUND MEANING BASS WILL BE HIGHER THEN THA MIDS AND HIGHS PLUS YOU HAVE A HALF OF A SOUND SYSTEM WITH OUT THE 4CH AMP THIS INSTILL IS INCOMPLETE SORRY BUT IT IS THE TRUTH

@SEsGarage

2 жыл бұрын

You’re entitled to your opinion. Between the bass restoration of the LC2i, and properly setting the gain on your amp, it’s 100% possible to get everything level matched and working together. I’m not looking to compete in any sound system competitions, for someone that is simply looking for a little more bass there is nothing wrong with this type of installation.

@lhughes2015

2 жыл бұрын

@_1_ Bruh calm down lmao

@samuraijohn1260

2 жыл бұрын

Yes good install thats what the lc2i is for. Some LC2i come with a bass knob. Unless your entering a bass competition this install is good. Average joe usage.

@mafosa8519

Жыл бұрын

What do you mean? Your statement doesn’t make sense to me? I have 3 amps all new component speakers and a 10” sub in the truck. I didn’t wire mine up like his. But it sounds great!! So.. what is it that we’re not suppose to do?? Larry

@manaburrn

Жыл бұрын

@@lhughes2015😂😂😂😂