2016 Buick Enclave valve body replacement. In the car!! (6T70 Transmission)
Welcome to our latest tutorial! In this step-by-step guide, we'll walk you through the process of replacing the valve body in your 2016 Buick Enclave equipped with the 6T70 transmission. Say goodbye to transmission woes and hello to smooth shifting! Follow along as we dive into the nitty-gritty of this essential repair. Don't let transmission issues slow you down-let's get your Enclave back on the road with confidence!
Пікірлер: 13
@doingstuffwithdylan4367 Thanks for this helpful video! Educated guess, its a Gen2 6T70? I Have a 2014 Lacrosse with 120k. For the last 25K it has a bad shudder in the 2-3 upshift, only when up to op temp. If i manual shift 1-2 and 2-3 taking the Rs above 4 it rarely happens. I bought a 50k Tranny from the same car. I have never torn into a tranny before. I am mechanical and my BiL is very mechanical, works on cars for lots of folks including motor and trannt swaps. I have serious questions. Q1: Should i use orig tecm and put new seals in the solenoids or should i use the new one, reseal and reprogram? Q2: Valve body...when i look at these online they stipulate an upper and or lower valve body. Is is a sandwich or are there actually 2 in separate locations? Q3: Valve body... i want to put a kit in it, clean and replace wear parts, there are several out there by several makers. Can you tell me if this is easy or difficult for someone who has never done it, whats the best choice here? Q4: the torque converter: my guess is use the new on with lower miles, can it be drained and filled before i swap these trannies?
is this to address the TSB for shudder GM put out a while ago?
@doingstuffwithdylan4367
2 ай бұрын
No, this was just to try to verify the transmission had to come back out.
Hi, the seals on the TEHCM are blowened so I'm replacing with the latest GM TEHCM, Computer included. Will I need to program with a Tech 2? Or will it just plug and play? Ty
@doingstuffwithdylan4367
2 ай бұрын
Programming will be required!
@DMR730
2 ай бұрын
Thanks for the quick reply... So I should reuse the same computer to avoid the programming??
@doingstuffwithdylan4367
2 ай бұрын
You can try to reuse the techm if you can’t program. If it is good, it should work, but they do have problems with us sometime.
@DMR730
2 ай бұрын
Thank you for the tips... I'm hoping my Autel will be able to marry the system.
At what point do you just do this, my car is shuddering at 40 and 60 mph. Everyone is wanting to simply replace my transmission and not just certain components?
@doingstuffwithdylan4367
4 ай бұрын
Probably need a transmission rebuild. At least maybe a used one will work
@doingstuffwithdylan4367
4 ай бұрын
Your problem is probably the converter or a broken wave plate
Promo>SM
@doingstuffwithdylan4367
3 ай бұрын
What?