How to disassemble your headlights on your dodge ram. 09-12 easy easy easy.
Жүктеу.....
Пікірлер: 62
@robr99058 жыл бұрын
2 years later still very helpful, thank you. I liked that you didn't go on bla bla bla about unrelated items. Direct and to the point, nicely done.
@BBBYpsi8 жыл бұрын
Thanks for this video. I have a 2011 dodge ram 3500 6.7 & use it for hauling travel trailers all over the country to dealerships. My bulb on passenger side just went out at 513,000. So I decided to change both bulbs at same time. With the help of this video I will save $100 labor cost from dealership. I can now do it myself. Hope your truck is still running good.
@michaelgreen13717 жыл бұрын
You dont have to take the grill off to take the headlights out. You will need a long extension. But you can get to the headlight bolts without even taking the plastic peice on top loose.
@monsterslayer4317 Жыл бұрын
Very well done. Watched several other vids before I found yours who didn't say a damn thing about the release tab. Thank you!
@michaeljensen95557 жыл бұрын
This is a great video for anybody who wants to replace or upgrade the headlights. However you don't need to remove the headlight housing to change a bulb. There is an access flap in the wheel well. Open that flap, reach in, twist light harness and pull out. Replace bulb and reverse steps.
@bryanproctor2983
3 жыл бұрын
Oh man! I was watching this video thinking, “All this to change a bulb?” Thank you! If you are correct you just saved me a lot of time Nd effort
@michaeljensen9555
3 жыл бұрын
@@bryanproctor2983 hopefully it's the same for u. I had a 2009 model and it had the flap. But always possible it got changed in later years.
@bryanproctor2983
3 жыл бұрын
@@michaeljensen9555 thanks.
@demonheat729010 жыл бұрын
Thank you, That was very helpful.... Love when people like ur self makes it easy for the rest of us. Thanks again.
@kevinmurphy5315 Жыл бұрын
Thanks ... just makes it easier when you can see it done before you set out to do it!
@MrClem662 жыл бұрын
Thank you very much! Really appreciate your concise tutorial and explaining the rear clip.
@vanbuddha9 жыл бұрын
Thanks very instructional I did mine today both sides in about 20, looks like a lot of work but with the help of this vid its a go.
@brianb72554 жыл бұрын
I got a 2010 ram 1500 almost identical to that one that I love. I’m putting in LED’s. This video helped me greatly! Thanks muchly!
@simplykoda4100
3 жыл бұрын
Well if it gets stolen we can find it
@robertbryson90623 жыл бұрын
No need to take the grill off..just get a long extension to reach the bolt visible from the top. You will need to pop the light out so to get the other end free from under the lip of the grill.
@thebars67007 жыл бұрын
Awesome awesome awesome video. Extremely informative, especially the part about the wheel well with the extra tab. Thank you!
@bryan7054610 жыл бұрын
thanks for the video brother you just saved me a trip the the dealer. I had some trim pieces painted on my 2011 3500 duelly and they had to remove the head lights . well the drivers side light was not working and the dealer wanted me to take it in and drop it off. I found your video and when I got the light out found it was just unplugged . just called the dealer and broke the bad news to them lol. bryan
@waynesbike2 жыл бұрын
Thank you for this, what a pain in the ass to do ESPECIALLY in the dark!!
@mrmgonzster9 жыл бұрын
Nice video helped me upgrade my 2014 low beam bulbs to sylvania zxe. Your PRO dude thanks
@mommasbigboy86566 ай бұрын
Thanks for the video. It really helped me out. 👍
@lylespeed2821 Жыл бұрын
Thanks for posting mine got broke appreciate it 4 sure 😁😁👍👍
@davidtannersr.16702 жыл бұрын
You did a great job n making easy for me
@MsCampos695 жыл бұрын
Great video. Step by step instructions. Thanks.
@frankppagano10 жыл бұрын
Thanks for the video! Really helped me a lot!!
@jbone20071925 Жыл бұрын
Made simple….thanks. I love mine also!
@fireant12722 жыл бұрын
Thanks my ram 1500 has been rock solid 180k miles
@yvandagenais22247 жыл бұрын
thanks.. perfect instructions .. worked like a charm
@Violetmw5311 ай бұрын
Very helpful video however to replace the amber light you dont need to remove the entire headlight. Only if you have to replace actual headlight!
@samtinsley4835 жыл бұрын
Thanks a lot! Big help. By passed dealer and $100 an hour
@erickincaid77282 жыл бұрын
This is so insane to change a headlight I thought it was a prank at first.
@isaeed1178710 жыл бұрын
thank you. you saved me some money..great video
@TrailBlazer52805 жыл бұрын
Excellent instruction, thank you
@jefferyscottporter76933 жыл бұрын
🗣🗣 Appreciate the help brother.....Good job 💯
@dextercollins91182 жыл бұрын
Thanks really appreciate it
@daywalker40711 ай бұрын
Thank you Sir, very helpful
@haventague14842 жыл бұрын
Thank you for the video!
@STORMIESHERO10 жыл бұрын
Did you ever get the new headlights you mentioned at the end of your video? I purchased the same headlights only they're blacked out where the chrome is on the original ones.
@DSPaczosa4 ай бұрын
Good video. Thanks much
@bucktaylor917810 ай бұрын
Great video🙏🏾🙏🏾
@robertogarza76102 жыл бұрын
Great video 👍🏽
@meglehman1622 жыл бұрын
This is the only video I found so far with the exact same headlight as mine, I ordered an aftermarket headlight that seem to be fine for most peoples 2012 Dodge ram, but my headlight looked Exactly like yours with two plugs and lights attached. Do you know what the model is for this headlight?
@christophercarson5783 жыл бұрын
It will all become more clear when you have the assembly out and in hour hands; and you see how you've snapped off every plastic connection point. I know. Time for 2 part epoxy for me.
@ColinBunston3 жыл бұрын
no need to remove the grille if you have long extensions for your sockets. The grille has nothing to do with headlight assembly other than easing access if you don't have long sockets. otherwise good info.
@mikel.laughridge94809 жыл бұрын
good job. thanks for the information on this. It is hard to remember but these trucks are now called RAM. The Dodge name was dropped several years ago. Keep up the good work on your Ram.
@__lil_mex__1381
4 жыл бұрын
Mike L. Laughridge the 2010 is Dodge Ram
@michaeljensen9555
3 жыл бұрын
2009 was when Chrysler announced that Ram would separate from Dodge. "Ram Trucks" was founded in 2010. Since 2010 models were being sold starting in late 2009, a 2010 model could still be called a "Dodge Ram", however late built 2010s could just be called "Ram Truck". It just depends on when they were built and sold. Every truck built for 2011 to present is 100% "Ram Truck". So you're not completely wrong, but you're not completely right either.
@arnoldsaunders57484 жыл бұрын
great video just a question I find my duel headlights are not to bright my truck is a 2009 ram just wondering how your is ?
@2mkholley
3 жыл бұрын
I have a 2010 the headlights suck!
@bryanproctor2983
3 жыл бұрын
@@2mkholley I just bought a used 2010 Ram 1500 4x4. I love this truck, but you’re right, the headlights are terrible! Click to bright and it’s worse. I’m watching this video to replace with some new Sylvania Silverstar Ultra. I hope I’m not wasting my time?
@jamiejackson39224 жыл бұрын
Thank uuuuuu!!!!!!!!!!
@anthonygochez3045 Жыл бұрын
Thanks I did that shit so fast
@natebrock97534 жыл бұрын
Got all the way to pulling the little clip behind the light down and the headlight is still stuck in there... just my luck.
@jeremylakenes68594 жыл бұрын
7:30 would be great to show that clip once it is out.
@davecpgh
3 жыл бұрын
He did........ 8:40
@thomasperusi78542 жыл бұрын
does anyone ever show the drivers side its different or my is messed up?
@Halko-nf8vv4 жыл бұрын
Clean your Motor up a little...!
@ballchamp5683
4 жыл бұрын
Find something else to to do
@dustymorris84444 жыл бұрын
Bro. Work on you camera skills.
@davecpgh
3 жыл бұрын
Kinda tough to hold the camera still when you need both hands to work. If you can't get the just of the video, well I feel sorry for you.
Пікірлер: 62
2 years later still very helpful, thank you. I liked that you didn't go on bla bla bla about unrelated items. Direct and to the point, nicely done.
Thanks for this video. I have a 2011 dodge ram 3500 6.7 & use it for hauling travel trailers all over the country to dealerships. My bulb on passenger side just went out at 513,000. So I decided to change both bulbs at same time. With the help of this video I will save $100 labor cost from dealership. I can now do it myself. Hope your truck is still running good.
You dont have to take the grill off to take the headlights out. You will need a long extension. But you can get to the headlight bolts without even taking the plastic peice on top loose.
Very well done. Watched several other vids before I found yours who didn't say a damn thing about the release tab. Thank you!
This is a great video for anybody who wants to replace or upgrade the headlights. However you don't need to remove the headlight housing to change a bulb. There is an access flap in the wheel well. Open that flap, reach in, twist light harness and pull out. Replace bulb and reverse steps.
@bryanproctor2983
3 жыл бұрын
Oh man! I was watching this video thinking, “All this to change a bulb?” Thank you! If you are correct you just saved me a lot of time Nd effort
@michaeljensen9555
3 жыл бұрын
@@bryanproctor2983 hopefully it's the same for u. I had a 2009 model and it had the flap. But always possible it got changed in later years.
@bryanproctor2983
3 жыл бұрын
@@michaeljensen9555 thanks.
Thank you, That was very helpful.... Love when people like ur self makes it easy for the rest of us. Thanks again.
Thanks ... just makes it easier when you can see it done before you set out to do it!
Thank you very much! Really appreciate your concise tutorial and explaining the rear clip.
Thanks very instructional I did mine today both sides in about 20, looks like a lot of work but with the help of this vid its a go.
I got a 2010 ram 1500 almost identical to that one that I love. I’m putting in LED’s. This video helped me greatly! Thanks muchly!
@simplykoda4100
3 жыл бұрын
Well if it gets stolen we can find it
No need to take the grill off..just get a long extension to reach the bolt visible from the top. You will need to pop the light out so to get the other end free from under the lip of the grill.
Awesome awesome awesome video. Extremely informative, especially the part about the wheel well with the extra tab. Thank you!
thanks for the video brother you just saved me a trip the the dealer. I had some trim pieces painted on my 2011 3500 duelly and they had to remove the head lights . well the drivers side light was not working and the dealer wanted me to take it in and drop it off. I found your video and when I got the light out found it was just unplugged . just called the dealer and broke the bad news to them lol. bryan
Thank you for this, what a pain in the ass to do ESPECIALLY in the dark!!
Nice video helped me upgrade my 2014 low beam bulbs to sylvania zxe. Your PRO dude thanks
Thanks for the video. It really helped me out. 👍
Thanks for posting mine got broke appreciate it 4 sure 😁😁👍👍
You did a great job n making easy for me
Great video. Step by step instructions. Thanks.
Thanks for the video! Really helped me a lot!!
Made simple….thanks. I love mine also!
Thanks my ram 1500 has been rock solid 180k miles
thanks.. perfect instructions .. worked like a charm
Very helpful video however to replace the amber light you dont need to remove the entire headlight. Only if you have to replace actual headlight!
Thanks a lot! Big help. By passed dealer and $100 an hour
This is so insane to change a headlight I thought it was a prank at first.
thank you. you saved me some money..great video
Excellent instruction, thank you
🗣🗣 Appreciate the help brother.....Good job 💯
Thanks really appreciate it
Thank you Sir, very helpful
Thank you for the video!
Did you ever get the new headlights you mentioned at the end of your video? I purchased the same headlights only they're blacked out where the chrome is on the original ones.
Good video. Thanks much
Great video🙏🏾🙏🏾
Great video 👍🏽
This is the only video I found so far with the exact same headlight as mine, I ordered an aftermarket headlight that seem to be fine for most peoples 2012 Dodge ram, but my headlight looked Exactly like yours with two plugs and lights attached. Do you know what the model is for this headlight?
It will all become more clear when you have the assembly out and in hour hands; and you see how you've snapped off every plastic connection point. I know. Time for 2 part epoxy for me.
no need to remove the grille if you have long extensions for your sockets. The grille has nothing to do with headlight assembly other than easing access if you don't have long sockets. otherwise good info.
good job. thanks for the information on this. It is hard to remember but these trucks are now called RAM. The Dodge name was dropped several years ago. Keep up the good work on your Ram.
@__lil_mex__1381
4 жыл бұрын
Mike L. Laughridge the 2010 is Dodge Ram
@michaeljensen9555
3 жыл бұрын
2009 was when Chrysler announced that Ram would separate from Dodge. "Ram Trucks" was founded in 2010. Since 2010 models were being sold starting in late 2009, a 2010 model could still be called a "Dodge Ram", however late built 2010s could just be called "Ram Truck". It just depends on when they were built and sold. Every truck built for 2011 to present is 100% "Ram Truck". So you're not completely wrong, but you're not completely right either.
great video just a question I find my duel headlights are not to bright my truck is a 2009 ram just wondering how your is ?
@2mkholley
3 жыл бұрын
I have a 2010 the headlights suck!
@bryanproctor2983
3 жыл бұрын
@@2mkholley I just bought a used 2010 Ram 1500 4x4. I love this truck, but you’re right, the headlights are terrible! Click to bright and it’s worse. I’m watching this video to replace with some new Sylvania Silverstar Ultra. I hope I’m not wasting my time?
Thank uuuuuu!!!!!!!!!!
Thanks I did that shit so fast
Got all the way to pulling the little clip behind the light down and the headlight is still stuck in there... just my luck.
7:30 would be great to show that clip once it is out.
@davecpgh
3 жыл бұрын
He did........ 8:40
does anyone ever show the drivers side its different or my is messed up?
Clean your Motor up a little...!
@ballchamp5683
4 жыл бұрын
Find something else to to do
Bro. Work on you camera skills.
@davecpgh
3 жыл бұрын
Kinda tough to hold the camera still when you need both hands to work. If you can't get the just of the video, well I feel sorry for you.
omg please dont make videos