How to Aim and Align your Headlights Correctly

Автокөліктер мен көлік құралдары

Shop for New Auto Parts at 1AAuto.com 1aau.to/c/19/db/headlight-asse...
This video shows you how to correctly aim your headlights, whether you just installed new replacement headlights, or your headlights just need adjusting.
🔧 List of tools used:
• Ratchet 1aau.to/oVp/1AXAA00016
• Marker / Writing Utensil
• Painter's Tape
• Measuring Tape
Subscribe: / @1aauto
Check out our playlist:
Driveway Diagnostics!: • Driveway Diagnostics!
Rideshare: • Rideshare
Tips & Secrets only Mechanics Know: • Tips & Secrets only Me...
How to Replace Headlights with parts from 1AAuto.com: • How to Replace Headlig...
For More Info visit us at 1aau.to/h/abM/
⚠ DISCLAIMER:
While 1A Auto strives to make the information provided in this video as accurate as possible, it makes no claims, promises, or guarantees about the accuracy, completeness or applicability of the content. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. All do-it-yourself projects entail some risk. It is the sole responsibility of the viewer to assume this risk. 1A Auto is not responsible or liable for any loss damage (including, but not limited to, actual, consequential, or punitive), liability, claim, or any other injury or cause related to or resulting from any information posted in this video.

Пікірлер: 572

  • @1AAuto
    @1AAuto3 жыл бұрын

    √ *Watch the Video* √ *Buy The Part at 1A Auto* 1aau.to/m/Visit-1AAuto √ *Do it Yourself* √ *Save Money*

  • @JDMSMOKEY03

    @JDMSMOKEY03

    3 жыл бұрын

    Wouldn’t u want the headlights at the exact same spot rather than passenger being higher and driver lower to not blind people. I just don’t want my projector headlights even so that at different angles it looks the same and not brighter than the other one. From factory, are the headlights even or one higher than the other like u guys said to do?

  • @1AAuto

    @1AAuto

    3 жыл бұрын

    +Gerald Martin Thank you for your question. We use UPS for shipping our parts.

  • @lialfredcastor4390

    @lialfredcastor4390

    2 жыл бұрын

    @@1AAuto where are your shops located

  • @edwardwaldron7813

    @edwardwaldron7813

    Жыл бұрын

    I have a 2008 Hyundai Santa Fe any idea where the headlight adjustment screw is at. It’s been at dealer twice for minor work but they keep forgetting ​@@1AAuto

  • @1pcmedic
    @1pcmedic4 жыл бұрын

    Every states motor vehicle departments should have a wall that drivers can pull up to with markings so that ANYONE can adjust their own headlights properly. In the past few years there are so many cars out there blinding oncoming drivers........

  • @FrankDracula_

    @FrankDracula_

    3 жыл бұрын

    I'm here specifically because I know im blinding everyone else when I drive lol

  • @loveever89

    @loveever89

    3 жыл бұрын

    @1pcmedic Now that’s a genius idea!! 👍🏼

  • @dancahill9122

    @dancahill9122

    3 жыл бұрын

    The blinding that everyone has experienced the last few years is caused by the Type of lights the automakers have been allowed to use, NOT the adjustment of the lights.

  • @RattyScorpion

    @RattyScorpion

    2 жыл бұрын

    @@dancahill9122 I think it may be both lmao

  • @user-bp4qq7tt1u

    @user-bp4qq7tt1u

    2 жыл бұрын

    @@FrankDracula_ lol it took me awhile to realize my lights weren't too bright, they're in people's faces and that's why they're flashing their brights at me

  • @carrsson
    @carrsson2 жыл бұрын

    Excellent video, detailed, clear, and concise. Very professional and to the point...not full of 'camera-time' trivia about personal life, or what gramma, grandpa, or his buddies do. Thank You.

  • @jpeknowbody3649

    @jpeknowbody3649

    Жыл бұрын

    Shit video

  • @JasonTylerRicci
    @JasonTylerRicci4 жыл бұрын

    I wish I had a garage that was 25 feet long, lol

  • @M70ACARRY

    @M70ACARRY

    4 жыл бұрын

    Wish I had a garage.

  • @Sebastian.12

    @Sebastian.12

    4 жыл бұрын

    Mark Stewart I feel you bro 😔😥

  • @delucerrr

    @delucerrr

    4 жыл бұрын

    I wish i had a car

  • @PontiacBandit

    @PontiacBandit

    4 жыл бұрын

    You gave me a good laugh! We were all thinking it, but you said it! Lol

  • @thomasdaum1927

    @thomasdaum1927

    4 жыл бұрын

    I wish my driveway was 25 ft longe !

  • @satxification
    @satxification2 жыл бұрын

    Never knew the driver side headlight needed to be lower than the passenger. Have not seen any other video that mentions this. This is good to know, thank you.

  • @Plekteret04
    @Plekteret048 ай бұрын

    This is the first video of correct aligment for headlight. This is more professional than most videos I have seen!

  • @balor6044
    @balor60442 жыл бұрын

    An excellent video that covers it all in a simple straightforward way and leaves nothing out!

  • @jesusnieto8007
    @jesusnieto80075 ай бұрын

    Thank you so much. I just bought a set LED bulbs to replace a dead pair of halogens and I noticed that the cutoff was a lot higher than before. I did as you advised and I am very happy with the results. My lights are now well bellow the rear window of the cars ahead, nobody has flashed me when coming the other way, and the illumination I get is way better than before. You got a new fan here.

  • @SlavaZone
    @SlavaZone Жыл бұрын

    I wish I could airdrop this video link to every car passing that has one headlight aimed too high 😂 Thank you for the super clear instructions!! Not it makes sense why the left headlight seems lower after service. But after measuring according to your guide, they were still both too low. I also upgraded to brighter bulbs as I was just using OEM bulbs, so hopefully with new bulbs and better alignment, I'll be able to see better at night!

  • @dhtsoaedsdhtnadi9575
    @dhtsoaedsdhtnadi95754 жыл бұрын

    Based on IIHS data and some trigonometry, the following chart should serve well. Back the car 25' away from the wall. First number of each line is headlight height in inches, second number is drop in inches. If you have projectors, measure at the HIGH side of the cutoff. If you have reflectors, measure at the top edge of the "hotspot", and drop the driver's side 2" more than the chart says. 22 1.5 24 1.75 26 2 28 2.125 30 2.25 32 2-7/16 34 2-9/16 36 2.75 38 2-7/8 40 3 44 3.25 48 3-5/8 54 4-1/16 IIHS describes 330" as the optimal distance of illumination for low-beams, and the majority of autos sold in the USA do not shine that far. The chart above should allow your low beam to illuminate the road 330' ahead (assuming your lights aren't embarrassed by a birthday candle). Using the high side of the cutoff as your drop guide will allow you to see the 330' distance in low beam while allowing the low side of the cutoff to do its job protecting oncomers from glare. If you're aimed according to the chart and shining into the passenger cabin in front of you, you're either a tall truck tailgating a pregnant rollerskate, or you forgot to turn off your highs. If you have reflectors, dropping the driver's side a little more than the chart says will accomplish the same goal SORTA. I say sorta because reflectors are scatterbeams and will cause SOME glare no matter what you do. I recommend a retrokit to a GOOD QUALITY projector setup. If that retrokit uses HID bulbs, make sure they have a solenoid cutoff to allow you to switch between high and low beam. In any case, try to get 5500K bulbs, or if you run HIDs with 55W ballasts, the next color temp higher.

  • @nolast3671
    @nolast36716 жыл бұрын

    I've watched several on KZread all day, this is the ONLY one that actually shows it step by step CLEARLY !!!! Thank you so much!!!!!

  • @bfpierce

    @bfpierce

    2 жыл бұрын

    Also, without a camera being held in one hand-wrench in the other and a lot of ummms and uhhhhhs and repeatedly admiring how nice the lights look, miscellaneous stories about their brother-in-laws truck. Etc

  • @JoeB3477

    @JoeB3477

    2 жыл бұрын

    A1 is the number one source for the best vehicle info and tutorials.

  • @jeff199999
    @jeff199999 Жыл бұрын

    I just installed new headlights in a 2003 Subaru Forester and aligned them using this procedure. Used a 55” TV box for creating the light beam map. Was easy, fast and accurate. Thank you for creating this superb video. I’m in your debt. “ATTABOY!!!”

  • @1AAuto

    @1AAuto

    Жыл бұрын

    +jeff199999 Thanks for watching, we're glad this video helped!

  • @Ken-zl1jf
    @Ken-zl1jf Жыл бұрын

    This was worth watching. Other videos on headlight adjustment miss key parts like the passenger light will be higher than the left to elliminate blinding other drivers, and that you need to do this on a level surface. This got my lights finally correct. Thanks!

  • @chrisbenefiel5212
    @chrisbenefiel52125 жыл бұрын

    Perfect, thank you for the clear and concise information. I will share with all my friends and family.

  • @1AAuto

    @1AAuto

    5 жыл бұрын

    Thank you for the great reply. We love to empower our customers by showing you how-to perform your own auto repairs while installing our high quality auto parts. Have a great day! 1aauto.com +Chris Benefiel

  • @ryoumans7780

    @ryoumans7780

    3 жыл бұрын

    He never states use hi or low beams

  • @AVB2
    @AVB25 жыл бұрын

    Well I followed your instructions to a T and it worked wonderfully. Thanks a million!

  • @1AAuto

    @1AAuto

    5 жыл бұрын

    +Ben Jones Thank you for the great reply. We love to empower our customers by showing you how-to perform your own auto repairs while installing our high quality auto parts. Have a great day! 1aauto.com

  • @andromeda6937
    @andromeda69374 жыл бұрын

    Really clear and instructive video, thanks!

  • @T410ce
    @T410ce3 жыл бұрын

    This is absolutely a precise and professional way of aligning headlamps and is not inferior to a headlamp aiming tool.

  • @1AAuto

    @1AAuto

    3 жыл бұрын

    +T410ce Thanks for checking us out! 1aau.to/m/Shop-1AAuto-c

  • @edwardgilby509
    @edwardgilby5092 жыл бұрын

    Good job explaining the system set up an showing how to basically adjust. I never heard about adjustment on passenger side higher then driver side but it does make sense. Thankyou sir.

  • @ericmedina8669
    @ericmedina86693 жыл бұрын

    Thanks for the headlight bulb replacement video for my 2003 Alero,did it in under five minutes!

  • @williemosier2092
    @williemosier2092 Жыл бұрын

    Watching these videos help me be prepared to do any repair on my van. Very helpful

  • @herculespoopable
    @herculespoopable4 жыл бұрын

    Thank you! Just got new projector headlights on my Trailblazer and driver side is pointed at the ground about 5 ft in front of the truck lol. I'm not mechanically inclined but feel more comfortable doing this myself after watching your video.

  • @1AAuto

    @1AAuto

    4 жыл бұрын

    +Slow Down Move Over Thanks for checking us out! 1AAuto.com

  • @guloguloguy
    @guloguloguy3 жыл бұрын

    THANK YOU, FOR DEMONSTRATING THIS VERY HELPFUL TUTORIAL!!! AWESOME!!

  • @ronniewofford8310
    @ronniewofford8310 Жыл бұрын

    I haven't hit 60 yrs old yet and when I entered the auto repair world we had equipment to aim lights as part of our annual vehicle state inspection. I aimed my share. I can't count how many times I wish I had one available

  • @amjadmlk
    @amjadmlk3 жыл бұрын

    Perfect and precise instructions 👍. I will share with my f&f about aiming headlights.

  • @Ottonic6
    @Ottonic68 ай бұрын

    When you were bringing your left headlight down, I would have lowered it to where it was too low, then bring it back up for a better visual. I know that's a little overkill but that;s just my OCD kicking in... Thank you for this, it was very detailed and easy to understand.

  • @arthurgillian7467
    @arthurgillian74675 жыл бұрын

    Great video and I used my garage door and works great, best instructional video I have ever seen. Thanks.

  • @1AAuto

    @1AAuto

    5 жыл бұрын

    +Arthur Gillian Thank you for the great reply. We love to empower our customers by showing you how-to perform your own auto repairs while installing our high quality auto parts. Have a great day! 1aauto.com

  • @Spfinator
    @Spfinator6 жыл бұрын

    Best guide for this on KZread. Thanks a ton.

  • @1AAuto

    @1AAuto

    6 жыл бұрын

    +Chris Brillhart Thanks for checking us out. Shop here for high quality auto parts: 1aau.to/m/Shop-1AAuto-c

  • @KO-pk7df
    @KO-pk7df Жыл бұрын

    Thanks. As simple as this sounds your method actually works pretty easy. I remember my 1971 Yamaha Enduro motorcycle had this same method diagramed with instructions in the owner's manual. I must say owner's manuals are not what they used to be.

  • @stephenhagen234
    @stephenhagen2347 ай бұрын

    And in states where this is part of the check for Vehicle Safety Inspection for license plate renewal this is very important. The phrase "Watch where you are driving. Keep your eyes on the road" come to mind. You have to see the roadway and conditions in advance to be safe. It's also true, you can 'overdrive' your headlights if the vehicle speed is greater than what you can see in advance to take evasive/precautionary action. All impacted by headlight aim. Thanks for the excellent presentation of this facet of motor vehicle safe operation!

  • @meliashe1873
    @meliashe1873Ай бұрын

    I was doing this all wrong. I was making the two beams meet in the middle crossing over one another (supposedly to make it easier to see down the road farther) which wasnt working. As soon as its dark outside today you can bet im doing this technique you showed. Thank you for showing this video!!

  • @52griz
    @52griz Жыл бұрын

    Followed your video to aim a new set of Auxbeam GX's in my '01 Sebring convertible. Test drove and everything is right on the money. Thanks!

  • @GP-fv2br
    @GP-fv2br6 жыл бұрын

    Excellent tutorial. Thanks!

  • @Rocketyt
    @Rocketyt5 ай бұрын

    What a most excellent video. I was just getting ready to take it to our trusty dusty repair shop and came across this video and I'm sure you just saved me a lot of Moola!! Thanks Bro!! 1A Auto will now be my first Stop to Shop!!

  • @roguepetunia
    @roguepetunia6 жыл бұрын

    Your video is the most informative compared to others on same topic on KZread.

  • @1AAuto

    @1AAuto

    6 жыл бұрын

    Thanks for checking us out! 1aauto.com

  • @richardbristol452
    @richardbristol4523 жыл бұрын

    Exactly what I was looking for. Thank you!

  • @glennyparham3848
    @glennyparham38482 жыл бұрын

    Excellent presentation. Good job. Easy to follow instructions. Thanks. G.Parham

  • @jamiestamand4840
    @jamiestamand48406 жыл бұрын

    Thank you, that just saved my butt big time. I used my garage door as a reference now I can do this for my friends if need be.

  • @ryans413

    @ryans413

    5 жыл бұрын

    Jamie St Amand Yea me too back my car in the garage so the front was facing the door closed the door cause I did it during the day but with garage door closed it made it dark adjusted my lights now looks good

  • @davidshek606

    @davidshek606

    3 жыл бұрын

    @@ryans413 Yeah, but doesn't your car have to be 25 feet from the garage door?

  • @jimmystecher5214
    @jimmystecher52146 жыл бұрын

    This rally helped me out, thank you so much.

  • @TheAgentAaron
    @TheAgentAaron5 жыл бұрын

    Excellent demo. Thanks for the video. I feel good about leveling my own headlights after this. Since this video addresses vertical adjustments to low beams are there any specifics to the horizontal adjustments? Specifics regarding high beams? Thank you again & merry Christmas!

  • @bigcarlherdt4681

    @bigcarlherdt4681

    8 ай бұрын

    Same question I had.

  • @sethaliee4370
    @sethaliee43703 жыл бұрын

    You guys are great for helping people ☺️

  • @richarddavidson9768
    @richarddavidson97682 жыл бұрын

    Thank you. Appreciate the thought behind the actions. Excellent!

  • @HeliMicky
    @HeliMicky6 жыл бұрын

    Wow best video I've seen on adjusting head lights :-)

  • @1AAuto

    @1AAuto

    6 жыл бұрын

    +HeliMicky Thanks for watching. Hope this helped you out. Have a great day! 1aauto.com

  • @user-zt6bt8dp2c
    @user-zt6bt8dp2c6 жыл бұрын

    Nice vid. All I did was park behind one of my cars and adjusted the cut off line just below the door mirrors. No more blinding car in front

  • @dillonh321

    @dillonh321

    4 жыл бұрын

    My only other car is a truck 😞

  • @satishbahuriya3334
    @satishbahuriya33344 жыл бұрын

    This video very helpful to me thanks sir, you doing great work thanks once again.

  • @OilDonkey
    @OilDonkey5 жыл бұрын

    So helpful, thanks!

  • @Joeelectronicschematicsforauto
    @Joeelectronicschematicsforauto Жыл бұрын

    Your videos are so informative they should appear in every automotive School to teach students You're simply the best

  • @daveyvane9431

    @daveyvane9431

    Жыл бұрын

    Yes! And in every country! Even Poland!

  • @oscarcuevassn95saleemzr12
    @oscarcuevassn95saleemzr124 жыл бұрын

    Thanks a lot for the vid. And also for A1 parts , I'm a customer, a happy one thanks a lot .✌

  • @1AAuto

    @1AAuto

    4 жыл бұрын

    +Oscarcuevassn95 Saleemzr1 Thanks for checking us out!

  • @rafaeldiazus
    @rafaeldiazus6 жыл бұрын

    Thanks! This is one of the best instructional videos I have seen on the subject matter. Well done.

  • @1AAuto

    @1AAuto

    6 жыл бұрын

    +Rafael Diaz Thanks for watching. Please keep us in mind in the future if you need parts for your vehicle. 1aauto.com

  • @videomaniac108

    @videomaniac108

    6 жыл бұрын

    Thanks, very interesting and informative.

  • @nbdysfool3

    @nbdysfool3

    6 жыл бұрын

    Just curious, I weigh 220 how do I factor me being in the car? Won’t that change the driver side?

  • @William1866

    @William1866

    5 жыл бұрын

    @@nbdysfool3 If your car has a front window, you should be able to see the adjustment board while sitting in the driver's seat. Check every day before and after eating.

  • @klancimcavoy7307
    @klancimcavoy73074 жыл бұрын

    Good explaining and showing can u say y its set at that height and is there any info on high beam headlamps also horizontal? Thx appreciate ur vid and info.

  • @billcoley8520
    @billcoley85204 жыл бұрын

    Very well explained. Thanks

  • @royantillon6786
    @royantillon67862 жыл бұрын

    Exelent video!! great explanation works great for my vehicle 👍 thanks for sharing!!

  • @WR_CTorch
    @WR_CTorch9 ай бұрын

    Very helpful! Thanks for sharing and taking the time to make this video.

  • @lancecameron9123
    @lancecameron91238 ай бұрын

    This was an awesomely educational video, thank you for your time and knowledge !!!

  • @smack9299
    @smack92996 жыл бұрын

    Excellent video guys. Just upgraded my bulbs to the new Philips x-treme Vision Gen 2 and was unimpressed...until i adjusted them. Thank again

  • @1AAuto

    @1AAuto

    6 жыл бұрын

    +Steve Mackenzie Thanks for watching. Keep us in mind in the future if you need parts for your vehicle. 1aauto.com

  • @ryans413

    @ryans413

    5 жыл бұрын

    With reflector housing people say you can’t use LEDs and you can you just have to re adjust the headlights to the new bulbs

  • @SMOKEATER850

    @SMOKEATER850

    4 жыл бұрын

    @@ryans413this was true a year or two ago, but you can use LED as long as they have the correct beam pattern, most modern LED bulbs have an adjustable base so it's not really an issue any more. Its HID that shouldn't go into regular reflectors. You'll see better with HID bulbs, but you'll be emitting tons of glare and blind oncoming traffic. HID bulbs should be in projectors, LED bulbs perform poorly behind a projector, so for the most part, a standard reflector is the only sensible option for an LED bulb. I recently heard these 4 sided LED bulbs do well in projectors but have not tried them because the 55w HID bulbs I'm running are amazing.

  • @markstephan2304
    @markstephan23042 жыл бұрын

    Excellent presentation, thank you!

  • @chilledoutpaul
    @chilledoutpaul5 жыл бұрын

    I have been a (UK mot test assistant) exactly the same thing as your (american) health test. when er do our headlight checks we have to use a beam setter and we do not have to set the o/s down 2". In our beam setter box we have a red line and provided the center of the beam "just where it kicks up" is below the red line the light is set okay, but we are allowed to pass the car provided it does not go more than 1" (2.5cm) below the red line. there is more adjustments that we can also preform with the beam setter

  • @kfdaddy
    @kfdaddy Жыл бұрын

    I read somewhere the ideal distance ANY headlight should reach out is 200 feet in front of your vehicle, for your DRIVER SIDE headlight. Using 200 feet is not practical so they settled on 25' as a good practical distance for measuring the drop. The ideal distance for the passenger side, I believe, is 400', but I won't do the numbers on that one since it generally doesn't blind oncoming drivers. If you have an average headlight height of say 32" and you want your beam to reach 200', or 2400", then you have to calculate the proportional drop between 25' or 300", and 200' or 2400". The formula would be as shown below, where you're solving for X, the drop at a distance of 25', or 300" 32"/2400" = X/300", 2400X=9600, X=9600/2400, X=4" drop at 25' distance. An even simpler way to calculate the drop is to take the height of your headlight and multiply by 1/8, or .125. This simplified method is for when the distance is 25 feet to the wall. You can substitute your own headlight height, but the rough numbers are going to be around 4" for an average car.

  • @fisher9276
    @fisher92765 жыл бұрын

    I usually adjust both my headlights high left, Youre welcome people. ha Very informative video

  • @1AAuto

    @1AAuto

    5 жыл бұрын

    +TPfisher92 P Thank you!

  • @JleeA314
    @JleeA3143 жыл бұрын

    Mines a 2015; pretty much the same. Thank you. Nice voice

  • @paulcarter2907
    @paulcarter29072 жыл бұрын

    Great video thank you..Clear and concise...

  • @ScrewballMcAdams
    @ScrewballMcAdams4 жыл бұрын

    Well done. Thank you.

  • @judgeleeder638
    @judgeleeder63810 ай бұрын

    Many thanks from the UK 😊

  • @damionfritz5881
    @damionfritz58815 ай бұрын

    Thanks so much your video was very helpful in adjusting the headlines on my 2008 Infiniti qx56 ...I was blinding other drivers and I know its dangerous both for them as well as myself...😢..thanks a million.😊😊

  • @dwoodog
    @dwoodog2 жыл бұрын

    clear and to the point. Thanks.

  • @dannewtonful
    @dannewtonful2 жыл бұрын

    Excellent video. Thank you!

  • @counciousstream
    @counciousstream3 ай бұрын

    Thanks for a great video. You guys are really good at getting to the point while providing both what to do and some background as to why. I've been turning wrenches for quite a long time yet still jump on KZread for pointers. Glad I came across your channel. Subscribed. I just replaced the headlamps in both a Buick and a Toyota. I'm going to use my garage door as the aiming board. The precision with which to assess and make adjustments is going to pretty much lost on the Buick, meaning I can pretty much do that one with a little bit of winging because it really doesn't project a horizontal transition line. The Toyota on the other hand is a very distinct horizontal line and I'll stick closer to the book, er uh the video.

  • @riconaka
    @riconaka4 жыл бұрын

    Thank you for this video! Very thorough!

  • @MrBestworkerone
    @MrBestworkerone2 жыл бұрын

    Well done. I have it down now. Thanks for the video. Again "Well Done".

  • @yves9893
    @yves98932 жыл бұрын

    Althought this an awesome video I cannot see how most people will be able to find a floor that is perpendicular to the wall that lights are shinning on. IF you are inside a garage AND you have 25 feet plus the car lenght inside then sure, inside walls are perpendicular to the floor BUT if your are in any driveway, a parking lot, and facing any exterior wall then you are screwed because any ground surface around a building has to have a slope, even if minimal so rain moves away from the building. Been searching for a good location for a while and never found one. Still an excellent video and gives me all I need to know.

  • @durgeshnandansingh9004
    @durgeshnandansingh90043 жыл бұрын

    Wonderful video, full of knowledge

  • @davidrobins4025
    @davidrobins40254 жыл бұрын

    Clear information and directions. Thank You

  • @1AAuto

    @1AAuto

    4 жыл бұрын

    +David Robins Thanks for the feedback!

  • @wm3293
    @wm32934 жыл бұрын

    Great learning video!! Now only if other drivers would stop high beaming For my LED low beams mine are level and are not aimed high and my light housing is projector type so there's a straight line cut off they learn the hard way when i High Beam them back got the upgraded Halogens in the high beams

  • @treal512

    @treal512

    3 жыл бұрын

    Newer lights have more output and as a result the spill is greater than standard halogens. I blame DOT regulations because ecode > dot

  • @appalachianapparition1398
    @appalachianapparition13985 жыл бұрын

    Awesome info, thanks!

  • @stealthslide
    @stealthslide5 жыл бұрын

    Excellent video .... thanks...... I will be using the tape on my garage door method to do this....

  • @1AAuto

    @1AAuto

    5 жыл бұрын

    +James Stahl Thank you!

  • @Michael-pl6tf
    @Michael-pl6tf5 жыл бұрын

    Very nicely done. It was clear and precise. I had No unanswered questions THX

  • @1AAuto

    @1AAuto

    5 жыл бұрын

    +Michael Thank you for the great reply. We love to empower our customers by showing you how-to perform your own auto repairs while installing our high quality auto parts. Have a great day! 1aauto.com

  • @foxfordcatguy2283

    @foxfordcatguy2283

    5 жыл бұрын

    1A Auto Parts What about horizontal adjustment?

  • @leeboggs269
    @leeboggs2693 жыл бұрын

    Thx guys for useful videos!

  • @pleuratgashi3665
    @pleuratgashi36655 жыл бұрын

    best video and very thanks :)

  • @J3unG
    @J3unG6 жыл бұрын

    Very helpful. Thank you!!

  • @1AAuto

    @1AAuto

    6 жыл бұрын

    +El Mission Thanks for checking us out. 1aauto.com

  • @PatricksDIY
    @PatricksDIY Жыл бұрын

    Thank you for this, I knew I was right that my passenger side needed to be higher, I had someone telling me that they needed to be the same height, but that did not make sense to me, I would have blinded oncoming traffic!

  • @TheCoastalMariner
    @TheCoastalMariner5 жыл бұрын

    Very informative

  • @thatstrami
    @thatstrami6 ай бұрын

    Excellent video Thank you very much

  • @markhodgkins9593
    @markhodgkins95934 жыл бұрын

    very nice demo. thanks!

  • @1AAuto

    @1AAuto

    4 жыл бұрын

    +Mark Hodgkins Thanks for the feedback!

  • @jeffreychavey4161
    @jeffreychavey41616 жыл бұрын

    Very good. Thank you

  • @robertodebeers2551
    @robertodebeers25512 жыл бұрын

    Good job. Excellent video.

  • @baptistedfr2734
    @baptistedfr2734 Жыл бұрын

    Excellent explanations thanks

  • @DeGENERAL936
    @DeGENERAL936Ай бұрын

    Great tutorial… thnks man

  • @cbouchez
    @cbouchez Жыл бұрын

    Great video - thank you for sharing

  • @vjmacintyre
    @vjmacintyre Жыл бұрын

    finally, a proper explanation. I'd still like to know the reference height that HIGH BEAMS should be at.. mine look to be right on top of my low beams' focal point..

  • @user-we2qc8lh5h
    @user-we2qc8lh5h6 ай бұрын

    Good information, Thank you

  • @luke_8_17
    @luke_8_175 ай бұрын

    Lived most of my life in Texas, where car inspections are mandatory and lights get yearly adjustments. Now I live in Oklahoma, where cars never get inspections. When a drivers lights are misaligned, they never gets adjusted unless the driver feels up to it.

  • @josephdesilva9400
    @josephdesilva94003 жыл бұрын

    Awesome thank you only real helpful video on this subject 👍

  • @1AAuto

    @1AAuto

    3 жыл бұрын

    +Joseph Desilva Thanks for the feedback!

  • @tomparker7126
    @tomparker71263 жыл бұрын

    Great information........now to adjust my headlights

  • @1AAuto

    @1AAuto

    3 жыл бұрын

    +tom parker Thanks for checking us out! 1aau.to/m/Shop-1AAuto-c

  • @t_train3796
    @t_train3796 Жыл бұрын

    Good stuff. Thanks guys.

  • @drizzy9126
    @drizzy91263 жыл бұрын

    I love these guys!

  • @1AAuto

    @1AAuto

    3 жыл бұрын

    +Drizzy Thanks for checking us out! 1aau.to/m/Shop-1AAuto-c

  • @johngalt1931
    @johngalt19315 жыл бұрын

    Excellent video. I've book marked your site. If your part sales are handled as complete and professionally as this video I'm sure I'll find satisfied when I come back to purchase parts.

  • @1AAuto

    @1AAuto

    5 жыл бұрын

    +John Galt Thank you for the great reply. We love to empower our customers by showing you how-to perform your own auto repairs while installing our high quality auto parts. Have a great day! 1aauto.com

  • @TheAgentAaron

    @TheAgentAaron

    5 жыл бұрын

    I'm happy to have this knowledge so that I can level my own headlights. But, I still haven't figured out who John Galt is. Who is John Galt?

  • @leonardohuerta7937
    @leonardohuerta79372 жыл бұрын

    Good video and informative tips 👍

  • @minniep77
    @minniep776 жыл бұрын

    Great job. Thanks

  • @1AAuto

    @1AAuto

    6 жыл бұрын

    +Matt Premo Thanks for checking us out. 1aauto.com

  • @ronwedmore5637
    @ronwedmore56372 жыл бұрын

    Great help u just saved me a lotto money

  • @TIG2MAN0
    @TIG2MAN05 жыл бұрын

    great video. lots of help

  • @1AAuto

    @1AAuto

    5 жыл бұрын

    +TIG2MAN0 Thank you for the feedback!

  • @bizzito
    @bizzito4 жыл бұрын

    Great video! I have one question. If my headlights are marked as 1.3% inclination, for 25 feet it is exactly 4 inches. But if they are marked 1% or 2% the number will be different. Am I thinking right, is this the right way to calculate the inclination? Thank you!

Келесі