Today I clean and rebuild the weirdest carb i’ve ever seen. I’ll show you how to take it apart.
Жүктеу.....
Пікірлер: 53
@D0u61a57 ай бұрын
Great Video. I know this is old, but for anyone looking at it, it is also worth removing the quarter shaped cover on primary carb, held on with Phillip heads for cleaning and inspecting. Under the cover is a spring and diaphragm that squirts extra fuel on quick acceleration.
@LOOKOUT2012
2 ай бұрын
I think you're referring to the Coasting Enricher / Afterburner Diaphragm, this is Not for extra fuel on quick acceleration... It's the exact opposite - when shutting off from full throttle it adds a richer fuel mix back to the primary carb.👍
@gordonmcrobbie42203 жыл бұрын
Excellent. Very clear, descriptive commentary.
@thepursuit844
3 жыл бұрын
Thank you for taking the time.
@Shibbybooboo Жыл бұрын
You didn't do the second diaphram
@joeycottontail9433 ай бұрын
Amazing video. Rebuilding one for a neighbor and this helps immensely. Looks like we need a better rebuild kit because the one we have is junkshit.
@niconine268 Жыл бұрын
Thankyou. Great tutorial bro. You're a highly efficient tech & top quality video & instructions
@matibork3 жыл бұрын
Awesome work, thank you from Poland!
@thepursuit844
3 жыл бұрын
You are welcome.
@danbarbot26393 жыл бұрын
Efficient report for our favorite bike, thank you a lot . you have a very high equipment , but anyway a splendid open mind...thks again
@kratsz82652 жыл бұрын
Thanks for the vid! Rebuilding my XT’s carb next week.
@deathcogunit1062 жыл бұрын
Funny, I had to use an extractor on the secondary main jet as well. I'm pretty sure it has to do with that cross drilled port that supplies fuel. I used an m8-1.0 tap after I removed it to clean everything up.
@niconine268 Жыл бұрын
This is a brilliant detailed tutorial. Thankyou. Just struggling with low def pic quality. A little blur. I have this XT as well
@anthonytaylor185511 ай бұрын
Thank you! This was an awesome tutorial.
@joeycottontailakajoeschmo33663 ай бұрын
My choke won't pull out out of the carb body no matter how hard I yank it. anyone else having this issue? Something is definitely odd with that because yours came out like you could have did it with your toes. i would just leave it alone but it isn't functioning properly. Also my diaphragm is torn.... anywhere you can get those besides dealership?
@thepursuit844
2 ай бұрын
I wouldn’t use brute force. Play around with it. I’m sure you’ll get it. Any good bike shop can get them or search online.
@niconine268 Жыл бұрын
Thanks. I've got the same bike
@joseyamidgomezatehortua59943 жыл бұрын
Esa moto se ve como nueva, muy poco uso, buen trabajo
@jr73923 жыл бұрын
Hey, thanks for this video. I'm currently trying to revive a TT350 carb that is trashed. Not exactly the same as the XT350 carb but close enough that it's helped me figure out where exactly the o-rings go (the manual shows that an o-ring goes in the primary jet circuit but not exactly where) Also, one I was missing entirely (around the pickup tube in the carb bowl). I wish mine was as clean as your "dirty" one, it's a mess! It looks like someone was in it before and just plain didn't put o-rings back where they were supposed to go, then jetted it way down because it was running rich. I wonder why?!
@deyjahellington7945
2 жыл бұрын
Good attention to detail 🤗
@jr7392
2 жыл бұрын
@@deyjahellington7945 Update on this. I have the carb running perfectly now. The best rebuild kit for this carb is Keyster 0720N. It's expensive but has all parts that wear for this carb, including jets, emulsion tubes, needles, pilot jet and all gaskets including the coasting enricher diaphragm. The only part it doesn't have is the diaphragm for the secondary carb, but that is available through JBM Industries.
@niconine268
Жыл бұрын
I have 94 XT 350. Trying to do the carb as wel
@jr7392
Жыл бұрын
@@niconine268 Definitely get the Keyster kit for your year, either 0720N or 0621N. It's expensive but worth it as the cheapo $15 kits simply do not work or have the correct parts. Good luck.
@KamenKachev3 жыл бұрын
Hello, is it possible to remove the primary carb needle without separating the carbs?
@thepursuit844
3 жыл бұрын
I don’t recall since it has been so long since i’ve done this job but I would guess that it is possible. Give it a try!
@deborahchesser7375
3 жыл бұрын
Yes, if you can keep from separating them then that’s the way to go. Good luck from 🇺🇸
@deborahchesser73753 жыл бұрын
How do you like the dual carb setup ? I was thinking a custom intake boot and a pumper would really wake it up.
@thepursuit844
3 жыл бұрын
I’ve never ridden the bike. I just fixed it for someone.
@niconine268
Жыл бұрын
For real Deborah. Sounds like an interesting setup. I'd like to know more please
@thepursuit844
Жыл бұрын
It is the stock arrangement. Don’t ask me why, i have no idea as it is super strange.
@PureVenomthe1
16 күн бұрын
Ydis carbs offer good low end torque, and are now efficient as they use less fuel to do so. The top end is not bad either but obviously after 2/4-3/4 if the throttle it will use more fuel.
@svankervej2 жыл бұрын
That carb is not that dirty imo
@dawnpatrol42563 жыл бұрын
Great work! Which carb rebuild kit did you use and where did you get it?
@thepursuit844
3 жыл бұрын
Thanks. The brand is All Balls Racing. I got it from a small independent shop in my home town. Its not high end stuff, oe replacement, but you can find them everywhere.
@mackandchezz
3 жыл бұрын
Wish I knew that earlyer I had to by my kit piece by piece
@thepursuit844
3 жыл бұрын
For future reference you can buy an aftermarket carb rebuild kit for basically any bike if you look hard enough. Range $30-90 depending on what it comes with.
@artbentley8594
3 жыл бұрын
Would you rebuild my same carb if I sent it to you?
@thepursuit844
3 жыл бұрын
Sure. I’m in Alberta Canada. Where are you!
@johnnywishbone9323 жыл бұрын
Mastercraft tools. Get the job done!
@kwasidanso6219 Жыл бұрын
My fire also go off
@gabedearmon Жыл бұрын
where can i find a replacement carb for this bike please help 😭
@thepursuit844
Жыл бұрын
Unfortunately i do not know. Id ask a local bike shop.
@gabedearmon
Жыл бұрын
@@thepursuit844 the only one i can find is an oem on that’s $700 and out of stock, it hurts my brain
@thepursuit844
Жыл бұрын
Check old used bike shops and wreckers.
@artbentley85943 жыл бұрын
Hello, I have the exact carb. Are you in the states?, and would you be willing to clean and or rebuild mine?
@thepursuit844
3 жыл бұрын
I suppose you did not see my other reply from when you asked before. Yes, I would clean and rebuild your carb for you. I am in Alberta Canada so i’m not sure what shipping would be like. Please contact me at twbolder@gmail.com and we can discuss details in private.
@deborahchesser7375
3 жыл бұрын
@@thepursuit844 ill give you a hint, buy all the carbs you can and rebuild/clean them up and sell them here and there,they are good $, people love plug and play. Carburetors are a lost art to most people so take advantage of it, I do. 👍🇺🇸
@niconine268
Жыл бұрын
@@deborahchesser7375 Good advice again. You seem to be on top of your game. Im in South Africa though
Пікірлер: 53
Great Video. I know this is old, but for anyone looking at it, it is also worth removing the quarter shaped cover on primary carb, held on with Phillip heads for cleaning and inspecting. Under the cover is a spring and diaphragm that squirts extra fuel on quick acceleration.
@LOOKOUT2012
2 ай бұрын
I think you're referring to the Coasting Enricher / Afterburner Diaphragm, this is Not for extra fuel on quick acceleration... It's the exact opposite - when shutting off from full throttle it adds a richer fuel mix back to the primary carb.👍
Excellent. Very clear, descriptive commentary.
@thepursuit844
3 жыл бұрын
Thank you for taking the time.
You didn't do the second diaphram
Amazing video. Rebuilding one for a neighbor and this helps immensely. Looks like we need a better rebuild kit because the one we have is junkshit.
Thankyou. Great tutorial bro. You're a highly efficient tech & top quality video & instructions
Awesome work, thank you from Poland!
@thepursuit844
3 жыл бұрын
You are welcome.
Efficient report for our favorite bike, thank you a lot . you have a very high equipment , but anyway a splendid open mind...thks again
Thanks for the vid! Rebuilding my XT’s carb next week.
Funny, I had to use an extractor on the secondary main jet as well. I'm pretty sure it has to do with that cross drilled port that supplies fuel. I used an m8-1.0 tap after I removed it to clean everything up.
This is a brilliant detailed tutorial. Thankyou. Just struggling with low def pic quality. A little blur. I have this XT as well
Thank you! This was an awesome tutorial.
My choke won't pull out out of the carb body no matter how hard I yank it. anyone else having this issue? Something is definitely odd with that because yours came out like you could have did it with your toes. i would just leave it alone but it isn't functioning properly. Also my diaphragm is torn.... anywhere you can get those besides dealership?
@thepursuit844
2 ай бұрын
I wouldn’t use brute force. Play around with it. I’m sure you’ll get it. Any good bike shop can get them or search online.
Thanks. I've got the same bike
Esa moto se ve como nueva, muy poco uso, buen trabajo
Hey, thanks for this video. I'm currently trying to revive a TT350 carb that is trashed. Not exactly the same as the XT350 carb but close enough that it's helped me figure out where exactly the o-rings go (the manual shows that an o-ring goes in the primary jet circuit but not exactly where) Also, one I was missing entirely (around the pickup tube in the carb bowl). I wish mine was as clean as your "dirty" one, it's a mess! It looks like someone was in it before and just plain didn't put o-rings back where they were supposed to go, then jetted it way down because it was running rich. I wonder why?!
@deyjahellington7945
2 жыл бұрын
Good attention to detail 🤗
@jr7392
2 жыл бұрын
@@deyjahellington7945 Update on this. I have the carb running perfectly now. The best rebuild kit for this carb is Keyster 0720N. It's expensive but has all parts that wear for this carb, including jets, emulsion tubes, needles, pilot jet and all gaskets including the coasting enricher diaphragm. The only part it doesn't have is the diaphragm for the secondary carb, but that is available through JBM Industries.
@niconine268
Жыл бұрын
I have 94 XT 350. Trying to do the carb as wel
@jr7392
Жыл бұрын
@@niconine268 Definitely get the Keyster kit for your year, either 0720N or 0621N. It's expensive but worth it as the cheapo $15 kits simply do not work or have the correct parts. Good luck.
Hello, is it possible to remove the primary carb needle without separating the carbs?
@thepursuit844
3 жыл бұрын
I don’t recall since it has been so long since i’ve done this job but I would guess that it is possible. Give it a try!
@deborahchesser7375
3 жыл бұрын
Yes, if you can keep from separating them then that’s the way to go. Good luck from 🇺🇸
How do you like the dual carb setup ? I was thinking a custom intake boot and a pumper would really wake it up.
@thepursuit844
3 жыл бұрын
I’ve never ridden the bike. I just fixed it for someone.
@niconine268
Жыл бұрын
For real Deborah. Sounds like an interesting setup. I'd like to know more please
@thepursuit844
Жыл бұрын
It is the stock arrangement. Don’t ask me why, i have no idea as it is super strange.
@PureVenomthe1
16 күн бұрын
Ydis carbs offer good low end torque, and are now efficient as they use less fuel to do so. The top end is not bad either but obviously after 2/4-3/4 if the throttle it will use more fuel.
That carb is not that dirty imo
Great work! Which carb rebuild kit did you use and where did you get it?
@thepursuit844
3 жыл бұрын
Thanks. The brand is All Balls Racing. I got it from a small independent shop in my home town. Its not high end stuff, oe replacement, but you can find them everywhere.
@mackandchezz
3 жыл бұрын
Wish I knew that earlyer I had to by my kit piece by piece
@thepursuit844
3 жыл бұрын
For future reference you can buy an aftermarket carb rebuild kit for basically any bike if you look hard enough. Range $30-90 depending on what it comes with.
@artbentley8594
3 жыл бұрын
Would you rebuild my same carb if I sent it to you?
@thepursuit844
3 жыл бұрын
Sure. I’m in Alberta Canada. Where are you!
Mastercraft tools. Get the job done!
My fire also go off
where can i find a replacement carb for this bike please help 😭
@thepursuit844
Жыл бұрын
Unfortunately i do not know. Id ask a local bike shop.
@gabedearmon
Жыл бұрын
@@thepursuit844 the only one i can find is an oem on that’s $700 and out of stock, it hurts my brain
@thepursuit844
Жыл бұрын
Check old used bike shops and wreckers.
Hello, I have the exact carb. Are you in the states?, and would you be willing to clean and or rebuild mine?
@thepursuit844
3 жыл бұрын
I suppose you did not see my other reply from when you asked before. Yes, I would clean and rebuild your carb for you. I am in Alberta Canada so i’m not sure what shipping would be like. Please contact me at twbolder@gmail.com and we can discuss details in private.
@deborahchesser7375
3 жыл бұрын
@@thepursuit844 ill give you a hint, buy all the carbs you can and rebuild/clean them up and sell them here and there,they are good $, people love plug and play. Carburetors are a lost art to most people so take advantage of it, I do. 👍🇺🇸
@niconine268
Жыл бұрын
@@deborahchesser7375 Good advice again. You seem to be on top of your game. Im in South Africa though