It's exciting to see really big parts like that being machined. Thanks very much, James.

@jamespark_85machiningtv

3 жыл бұрын

Thank you for always watching my video.

You know it’s big chips when it sounds like you dropped your keys

Pretty cool that people are still able to be profitable running these ancient machines

@kisspeteristvan

Жыл бұрын

ancient ?

This brings back some memories from 1980's. That's a *small* vertical boring machine with a small part. No CNC in those days. The really *BIG* items went on a horizontal boring machine. Biggest I remember was a bearing for a NASA gantry tower. Very tight tolerances.

Nice work on that steel mill bearing chock. Koreans are hard workers! Keep up the good work.

So either you have tiny baby hands or those inserts are Absolutely massive!!! 🤯

@MrBen527

3 жыл бұрын

Lol

Good job! I realy like look on these old controller interfaces. Especially rotary knobs.

Oddly pleasing to watch. Many thanks!

Cool video! Inspiring to see your process.

That old version of Fanuc is the best they ever made. So easy to use. Got it on our Victor lathes

Beautiful work! It looks great! :)

Love those oldie but goodie fanuc controllers, very easy to change the program on them as needed, also thats one mighty big bearing block, seen similar ones on aluminum cold rolling machines and cardboard box corrigators. 🤓

Great video! im still new to the trade and at my current work we also have those older Fanuc controllers. Great to see how cool some of the g-code can be since we dont really use any inbuilt functions or anything, let alone manually program it in g-code as usually we have models and CAM....kinda want to figure that out sometime though as it seems to be a good thing to know. (im usually on milling rather than turning sadly as we dont have any CNC lathes)

MTC 😁 Neat part though, thank you as always for sharing.

@jamespark_85machiningtv

3 жыл бұрын

Thank you for always supporting me. I will always remember you.

Is that radius groove for an o ring seal ? No chatter marks either , nice job!

Охлаждение - игрушка диавола ежже!

Was wondering where my cheater bar went lol cool video 👍🏻

the amount of metal remove in one cut is impressive

Heh Good One... MTC makes my day :) Greetings

So how many used carbides have you launched into the wall on night shift with the bad boy blower and ball valve....? I worked on a twin head scheiss that would take 48mm cut (twin offset 16mm and a single)

isn't that control interface on a cabinet door? only asking cause I see it swinging slightly whenever you interact with it.

Looks like a gigantic bearing block

i'm assuming that these cuts are childs play for this mill and if surface finish didn't matter it could really take a much bigger bite as long as the fixturing could hold it.

I like how the chips fall out of the machine by the centrifugal force

@travistucker7317

3 жыл бұрын

Same thing that keeps them in there causing that bad finish at the bottom

Sheared bolt in the toolholder ? 🤔

잘보고갑니다.

No heat worries, coolant?

you have such skills, me I'm a builder of small ships we bend frames manually and form plates by eye, but what is this part for

i use to run an old Bullard VTL that was converted to cnc a few years back. We called it The Widow Maker bc like 3 operators beforeme were killed on it. Scary, stay safe around your machine while doing your camera work and that spindle is turning!!! That machine has no concious.

Sir, does that Richards have a rectangular tag on the frame with a USG ID Number? The machine doesn't look like it in the pictures, but was it made in the frame CNC? Just idle curiosity? I sent many very similar to the DRMO for sale only to be sent overseas. Fine looking work by the way.

Allen keys are never long enough, always need a pipe. The largest ball nose I used was 42 mm diameter.

@swamppifi6186

Жыл бұрын

Arry Who did you get a 42mm inserts from, we have been getting custom 40mm & 42mm made as a trial from two different insert suppliers for our process, we currently us 50.8mm (2inch) buttons.

@arry4264

Жыл бұрын

@@swamppifi6186 I’m afraid I don’t know. The company I was at was dormer engineering in Middlesbrough UK and the tips and tool were quite dated.

It was a nice part to machine but overall surface finish disappointed me a bit.Unless there is other operations for final machining or grinding that I'm not aware of.

Aren't we at Fanuc 5 now lol. That is some 90s CRT stuff there.

@randombuilds8336

3 жыл бұрын

Lol, I'm still running 2 lathes with Fanuc 0-T controls and a HAAS with a CRT. They still work, so we don't get upgrades.

@irishwristwatch2487

3 жыл бұрын

My old place used to load up wire eroder programs by 3.5" floppy disks haha, I feel your pain

City endures brief brown out

Карусель-карусель :)

Ever do milling on the newer Hankook VTL?

@jamespark_85machiningtv

2 жыл бұрын

Not yet😅

I'm steel wondering what this thing is. Looks like a vertebrae for a giant robot.

Wonder what this monster part was..

i just looked up cnmg 250924 and holy....expinsive

@user-yi1rv4jr2r

3 жыл бұрын

You could try our CNMM190624,maximum cutting depth ：12mm maximum feed：0.8mm/r and nice price.

Someone welded one corner.

except lifting with that bad looking crane belt nice machining on that old lady

Would that part be for a pipeline or drilling rig perhaps?

@jamespark_85machiningtv

3 жыл бұрын

The bearing is assembled inside. Part of steelmill.

@claytondennis8034

3 жыл бұрын

It's a bearing chock for a roll used to "squeeze" hot steel into shape in the rolling mill.

Nostromo computer :D

That is an ancient controller along with the machine, I guess okay still for that kind of bull work.

I make finished parts about the size of your turning tools.

@mehmettemel8725

3 жыл бұрын

I tell you what I used to machine large parts like that years ago working for an engineering company use to enjoy it.Large parts are generally easier to machine and access for tools usually not a problem.These days I work for myself machining small to medium parts and nothing pisses me off more than very small parts hard to hold sometimes can't get a tool to suit and measure so don't under estimate your small parts machining skills.

for some reason, display screen reminds me of "alien 1" computers

쌌다..

I can't imagine crashing this thing.

@DarioDavide

3 жыл бұрын

Even outside soviet russia, this thing crash YOU.

Why on lathe, why you usent a multibore with a big Diameter, no work for two machines

Bist du sich ein deutscha?

You had a scratchy because of no coolant

Ya...i would've screwed that up...

Please switch the crane belt to an intact one, would be a shame if someone get's hurt because of faulty equipment.

Rare insight into Chinese manufacturing. Machining without coolant: A Documentary

@jamespark_85machiningtv

3 жыл бұрын

Chinese manufacturing? Who are you talking about?

@patrickcrabb6212

3 жыл бұрын

@@jamespark_85machiningtv No one, just being a dick.

И внутренний размер ушел