If enyone is looking hpd performance do have a spike when I did my gu wagon I just used same grease an a drill it an then taped it an dropped the oil an sent it 30000km an it's running sweet

Hi Adam I turbocharged my 1hz with a DTS kit 10 years ago and it’s now done 600,000 kms on a stock engine keep it de-tuned as you have and it just may outlive all of us, loving your videos and will hopefully see you around sometime

@samul7482

2 жыл бұрын

How much psi are you running

@njpw1402

2 жыл бұрын

@@samul7482 12 psi

@Raven-cf5qd

2 жыл бұрын

@@njpw1402 what sort of power are you making tho?

@njpw1402

2 жыл бұрын

@@Raven-cf5qd not sure it’s been more than 10years since being on a dyno and I can’t for the life of me remember

@Raven-cf5qd

2 жыл бұрын

@@njpw1402 it probably isn't worth it. $3000+ and I've seen guys do a detuned dyno and they only increased 73rwhp to 89rwhp that a terrible gain for $3000+ you'd gain more with extractors. He then had it tuned and it made 110rwhp. It he planned on adding more boost. I wouldn't bother turboing without a tune. A non tune turbo may increase torque better I'm not sure but yeah

For not being very mechanically minded, kudos to you for giving it a shot. There’s nothing better than fitting stuff like this to your own car and being able to reap the benefits as well. Keep up the great work 🍻👍

Sounds bloody amazing mate you’ve done well!

Very responsible build 👏 no unnecessary things

i just brought a hzj75 ute nearly a month ago and i think it might of been one of my best purchases they definitely no race cars n/a but they get the job done not to mention you kind of made me want one

Just a tip, left handed drill bits for drilling out snapped bolts and studs. 👌

That’s a big hard job done well there. You should be proud of what you have achieved.

Mate ive been soo keen for this vid U domt under stand 🤠🥳🤯

You have done well, right up to the point where you played with the fuel screw. If you want to keep it reliable and not destroy your engine, get an injection shop to fit an aneroid and tune the pump properly. Pointer for you, if you take injector lines off put caps on the injectors to keep crud out. Not a keyboard expert, diesel mechanic that has installed a lot of DTS kits. I personally have had the same system on my 100 series for 15 years. The only issue I have had was the rubber inlet elbow getting soft, replaced with silicon no dramas. Notice that your indicator was flashing really fast in the road test so I assume your running LED indicators on the back, there is a load resistor that you can get to slow the indicators down to normal. They can be tucked away neatly in the front indicator housing.

@rsixsta

Жыл бұрын

Hey mate I had a full rebuild in jb turbo on mine but zero boost. My sons a fitter and turner and he suggested very slight turns of the wastgate rod? Thoughts

Ya mate Mitch is a legend, great vid, good job 👍🏻

Sounds awesome mate 👌

That troopy has come along way since you got it and it is lookin like one capable car, sounds mean aswell, keep up the good work man yewww

Bloody hell your rigs lookin good adam and got a turbo now haha sweet

LOVE THE GEAR shifting 😍🤙

A lot of the spikes diesel shops use which you are referring about, are bits of steel rod turned down on a lathe to receive the spike effect. They just match the diameter of the rod to the diameter of the fitting.

Great video - thanks mate. Can't wait to turbo my 1HZ Troopy :thumbsup

Well done bud sounds awesome

Good Stuff Adam, My son and I love the channel. Well done with Turbo install, keep to reasonable tune, not too sic We are running 105 1hz Safari turbo & HJ60 with 12HT Safari turbo. see ya on the tracks with our merch 👍

Finally, that's awesome man.

Love the vids keep it up good surprise on a Wednesday night

Well done mate, enjoyable moovie, thanks for sharing 👍🏻

cant get enough of toyotas amazing engines

Another mint video man 👍👍

Sounds so good!

Boi that whistle at 30:30, so smooth

The whole stainless snorkel with a turbo is interesting. Fair play to anyone who wants to cop that noise in their ear for long drives touring. More so the landcruiser guys who have the turbo on the driver's side. Having owned skylines and the like as track cars with their intakes and turbo noises I couldn't imagine wanting to make the intake any louder, especially putting it right into my ear.

That first start, you had a turbo-charged smile on your face....

Sounds great from in.the cab

Mate that thing sounds awesome. What’s next for it mate. Great video mate keep it up 👍

If you're not keen on spiking the sump look up the instructions for the 1hz Safari turbo kit, there is an option of drilling the drain into the block, way more secure and definitely the way to go. I did it this way and went pretty easy just need the right drill bits and a right angle drill. Make sure to coat the bits with grease to avoid metal shavings in the engine. Happy days

Nice work bro

Good to see u giving it a go, if that barbed hose fitting fails or its make u sleep uneasy, buy a steel barbed hose fitting and a steel nut to suit, use some 3mm steel plate, drill a hole large enough in the steel plate for the oil to flow, weld the nut to the steel plate, line it up with the hole u made then weld the steel plate to the sump , then screw it all together ect

Nice mate go the Troopy

Good job! I've heard people recommending to get the injectors replaced or reconditioned. Might be an idea if you don't know the history of the motor.

Sounds mint

Wouldn't mind more onboard shots of you driving it tbh. She sounds mint haha. Maybe even incorporate onboard shots when you go out wheeling as well.

Great job

Holy demon that sounds good in cab

Hello, thanks for the video. I'm in Costa Rica. I just installed this motor with a turbo in my JB40 1980 Landcruiser and I love it. May I ask, whats the turbo psi that you run and whats the highest rpm you accelerate to?

Lol enjoy it while it lasted brother !

Nice build young felah,turbos go well in those motors. The trade of is overheating when towing vans,seen many people try to fix the problem with bigger radiators,boost conpensator,adjusting mixture, reco injection pump,new injectors,and they say the head could be faulty. Simple they have non turbo pistons and no oil squirters to cool the piston.

@Yuriy_Piter

2 ай бұрын

you are right, but if the head and pistons from 1hdt are installed, then all these problems are absent

where did you get your oil feed pick up point?

Yewww 🤙 sounds too good in cab

Been waiting for this! Now I’ve got something to do tonight… : l

I got a 1hz with 456789km on it. Thinking about turbo it. Had a new head at 305k. Very good video

whooo hooo bout time

Uh oh you jinxed, “will probably find weak points in the drive line” Ahhhh definitely think you did 😂😂😂😂😂😂😂

Yewwww. What a title hey 😏

Feel free to do more build vids - sick. Ps. Can you please help cure my OCD? Straighten up your steering wheel or panhard rode. So it’s level when going straight haha & Maybe get an LED relay for your flasher (I’ve got one spare or just get one from Jaycar)

Love it

Been waiting for this one... sheeeesh, she sounds sickkkk

@toms_gupooe

3 жыл бұрын

sheeeeeeesh

@jyeburns3335

3 жыл бұрын

Sheeeeeeeeeeeeeeeeeesh

@CleepyJoeOfficial

3 жыл бұрын

LZ GANG

@CleepyJoeOfficial

3 жыл бұрын

Sheeeeeeesh

hey mate, does water ever get in through the stainless snorkel into ur air box ?

Just go to a metal shop and get a 600mm length of whatever size rod you need to suit your fitting and sharpen a point on it. But make sure to drill a start point and weaken the sump so it doesn't wanna bend when you hit it. Then just use tons of grease on the tap then screw the fitting in.

Uppa the turbo 1hz

I used a piece of round bar that I ground to a point on my bench grinder🤣

Ahahaha as if I buy a turbo for my car and 20 minutes later you post this 😂

Sounds like a td42 🥶

Induction noise is fun at first but gets annoying after a while. I had an aftermarket pre filter on the snorkel but changed it back to standard because of the noise.

Does it blow any soot? Water temp holding steady?

I noticed your oil filter said 491k and you said the car has 502k. Now it’s turbod I highly recommend doing oil and filter services every 5 thousand, 1 because there’s a turbo now that loves clean oil, 2 the turbo is gonna make the engine run a lot hotter than before even under normal operating conditions like cruising st highway speeds and this will push the oil close to its temperature break down.

Use Inconel exhaust manifold studs, when bolting the manifold, turbo n exhaust back together.

How did u put coils suspension on the front

Yeah that in cab sound with the window down will annoy you after a while 😂 I got over it really fast and my snorkel is on the passenger side

which turbo and manifold i could put on my 5Le engine

Hey I saw you guys at the snow .Remember the Nissan patrol gu with the maxxies treps 37s

Sounds mint espescially from inside tuned beast me likey

No egr Adam, so no carbon crap. Good spray of brake clean and hose will clean it up nice

Boost addiction is real. Find yourself shifting more than normal now😂

What fuel consumption do you have now with the turbo installed? increase??

25.20min "And Adam heard every thing that he had made, and, behold, it was very good."

With spiking the stump use a small bottle jack or the one in the vehicle and make a spike out of rod and either tack weld or stack a couple sockets inside each other so it doesn't slip

Where you get your bull bar ?

Any chance I can get a couple livin 4x4 stickers to put on my cruiser?

Any engineering supply’s like hare & Forbes in Danny o get or any engineering supplys

Good video. Just the no bs How to I needed to bite the bullet on mine!

Send it, fuel pump wound up, 20psi send it boysh!

My 80 series now has 700 k km's on it's original 1hz motor that has no turbo so thinking of doing pretty much what you're doing although i'm hoping to get a new DTS kit. I have no intention of intercooling though - just turbo motor and make it breather better.

The merch link in the video description is broken.

I’ve done 4 1hz sumps drill and tap 1/2bsp barn and they work mint use loctite 577 never had one leak I had a mate did the same and he landed on top of a railway iron post in the ground went thru the sump and the barb stayed the same I wouldn’t do it any other way

The turbo will come in handy turning 35's

Awesome work! Fix ya steering wheel orientation haha my ocd is going over time

the spike you have in the video is just a spot center punch, i can find it all over for sale in different tapers and sizes

Spike details down the bottom here, thanks to some old school safari install notes - www.safarisnorkel.com/turbo/guides/sthzj70w/sthzj70w_guide_new.html - that gearbox is obviously smoooth too, still the r151?

ls turbo when it blows 😈

Can I replace 1hz engine instead of 1kz?

How’s that steering alignment 😂

Dropping it down to 3rd for hills is BAD MATE! 🤣

@xaviermann6803

Жыл бұрын

better to drop gears and rev higher mate

What exhaust is that

How much can quotation for turbocharger

I got my 1hz turboed and i got it done by a professional in sale i got the turbo injectes and it got tuned for 4 grand i got it at mmp turbos

My dad snapped the timing belt pulley on his 80 and it took us a week trying to get it out and had we had to re time the motor but we did it wrong the first time and the valves hit the pistons😶 we got it running though ( it was a big mess)

that oil mark on your intercooler is most likely a boost leak

Just go to a machine shop and tell them to spin you up a spike to the exact outside size you need and heat and oil quench the tip so it doesn't blunten straight away ive made a couple for fellas working on vl turbos and gqs

Tip for you mate, if you want that gearbox to survive a while. Get your hand off that gearstick so much 👍🏻 awesome sound though

My 1HZ running garret red wheel bad boy fatz 4” air box intercooler but 12mm injector pump Ceramic top pistons ARP head bolts 3.5” SS exhaust twin stacks Running 35” tyres Dyno 150 hp @ 1,400 rpm 500 nm torque @ 2,050 rpm Boost 21psi A joy to drive even towing the 3.7m tinny

Yeeeessss my dude been having real bad withdrawals.. now they’ve finally been fixed 😂

cheeky old gibby road

Getta led relay from jaycar, will stop your led indicators from hyperflashing

Hell 😈 Yes 👍🏼, open up the lungs 🫁 🐌