Toyota 1HZ Turbo Upgrade Build

Автокөліктер мен көлік құралдары

I’m new to this video editing jazz, this is a build done by Reece Diesel.
Upgrading a Toyota 1HZ to suit turbo, for more of our content please like and subscribe, also check out the Facebook page ReeceDiesel
Cheers.

Пікірлер: 141

  • @spazzar5409
    @spazzar54098 ай бұрын

    They look a treat it's like a handbuilt 1hz probably better than factory

  • @eduardorivas7841
    @eduardorivas78413 жыл бұрын

    Really love this video 😍 my grandfather has a 1991 Toyota Coaster with the 1HZ and I really love it. We're from Costa Rica

  • @petersparkie
    @petersparkie3 жыл бұрын

    I’m impressed with the care and attention to detail

  • @nadheembera9250
    @nadheembera92503 жыл бұрын

    Excellent rebuild of this iconic engine. Great job 👏👏👏

  • @panamafishingtours
    @panamafishingtours3 жыл бұрын

    that should be good for the next 25 years or so .... love those engines

  • @OrlandoBmz
    @OrlandoBmz3 жыл бұрын

    Awesome video guys thanks for taking the time to put it together !

  • @Red-cy4hl
    @Red-cy4hl3 жыл бұрын

    Truly a work of art

  • @halaneahmedofficial822
    @halaneahmedofficial8223 жыл бұрын

    Wow what a lovely fantastic upgrade building 1hzengine

  • @FF-gc7ft
    @FF-gc7ft3 жыл бұрын

    I really enjoy to watch this.

  • @kyefoley2330
    @kyefoley23308 ай бұрын

    “That’s it Tuesday” hahah can’t wait for the next built 1hz vids

  • @evgenynevsky2184
    @evgenynevsky21842 жыл бұрын

    Awesome! I have replaced turbo for my 1hd-t from 1hd-fe. Much better from low.

  • @baywarra
    @baywarra2 жыл бұрын

    Diesel Wizardry right there 👌

  • @markgardiner1767
    @markgardiner17673 жыл бұрын

    Well that was pretty time good I thought.Specially me being a 1HZ Troopie owmer for the last 20yrs🙋‍♂️👍

  • @mt72
    @mt723 жыл бұрын

    Love the build

  • @brendankeppie1495
    @brendankeppie14953 жыл бұрын

    going off your eBay add this is very good and attention to detail, need this done when i hit 500 000km

  • @stevesonyaguitar
    @stevesonyaguitar Жыл бұрын

    great job guys

  • @auladepiano
    @auladepiano3 жыл бұрын

    Very nice. I should take a serious look on my 1hz with 80 series turbo...

  • @ManofCulture
    @ManofCulture3 жыл бұрын

    Love the turbo spin

  • @huckcast7175
    @huckcast71753 жыл бұрын

    Bloody beautiful

  • @jaminthevanuk296
    @jaminthevanuk2963 жыл бұрын

    These guys are the best

  • @MrlandcruiserG
    @MrlandcruiserG2 жыл бұрын

    I want of this engine for my hj45 nice engine man thanks for the video

  • @senile8668
    @senile866811 ай бұрын

    how much for this 1hz rebuild?

  • @angelolovato6494
    @angelolovato6494 Жыл бұрын

    Man this is awesome

  • @oldsklteg
    @oldsklteg4 жыл бұрын

    Awesome soundtrack 👌👌

  • @shadowXe123

    @shadowXe123

    2 жыл бұрын

    Best part of the sound track 7:28 lol 😂

  • @EduardoZerna
    @EduardoZerna Жыл бұрын

    Waoooo excelente video, hicieron un magnífico trabajo 🙏🏽

  • @PaulEglinton
    @PaulEglinton3 жыл бұрын

    Sounds sweet

  • @Parhomenko-B
    @Parhomenko-B3 жыл бұрын

    Thx for vid from Russia!

  • @jenserickson1268
    @jenserickson1268 Жыл бұрын

    I have a Toyota Troopy in Lima, Peru. I'd love nothing more than to have this done to my 1HZ.

  • @carlcasey4177
    @carlcasey41772 жыл бұрын

    Man that was mad!!

  • @JoaquimSantos-lh1vj
    @JoaquimSantos-lh1vj7 ай бұрын

    Adoro fazer este tipo de trabalho

  • @jayallen8529
    @jayallen85294 жыл бұрын

    Love the vid. Rebuilt my fte in the shed at home recently. Hopefully good for another 500k. These 1hz/1hd engine are more truck than car engines, and very heavy.

  • @MrLunithy

    @MrLunithy

    4 жыл бұрын

    200kg

  • @bigoz1734

    @bigoz1734

    3 жыл бұрын

    Crazy how much engineering weny into them. They're well designed

  • @phalanx3803

    @phalanx3803

    3 жыл бұрын

    with good care it will easily do another 500k. i have a 75 and 105 both with 1HZ's hopefully one day i will have grand-kids and they will learn to drive in them like I did. if i get some spare money i am gonna buy another 1HZ and drive train and stick them in my 1990 Toyota DYNA 200.

  • @harveysmith100

    @harveysmith100

    3 жыл бұрын

    @@bigoz1734 Designed in an Era when Toyota was awash with cash. Fortunes could be spent on R&D and often was. Possible the greatest diesel family of them all, the straight sixes

  • @halaneahmedofficial822
    @halaneahmedofficial8223 жыл бұрын

    I very lovely land cruiser 1hz stockengine sounds

  • @shane0yourgod
    @shane0yourgod4 жыл бұрын

    Looks good. What are the specs on the finished product and cost?

  • @peter2679
    @peter26793 жыл бұрын

    They are quick workers.

  • @Tammy-xf4kz
    @Tammy-xf4kz8 ай бұрын

    Sounds beautiful 🥲🥲🥲❤️‍🔥❤️‍🔥❤️‍🔥❤️‍🔥

  • @SyreViper
    @SyreViper3 жыл бұрын

    Mine just shat its self cylinder 2, rebuilding it with the turbo upgrade will feel like a new car 🤙

  • @JackDaniels-hz8tc
    @JackDaniels-hz8tc6 күн бұрын

    That sound!!

  • @mrhemsworth6601
    @mrhemsworth66014 жыл бұрын

    Far out, did you put new crank shaft? also new thicker” pistons for turbo Because you said it will run for 500k, man this is absolute heavy truck engine 👌🏼👌🏼💪🏻💪🏻

  • @SpeKterDesigns
    @SpeKterDesigns3 жыл бұрын

    If thats just a turbo do you do a turbo and supercharger upgrade/rebuild, even though the HD-FTE turbo kicks in pretty low rpm standard, more power faster with super charger and then more power and torque with bigger turbo???

  • @auladepiano
    @auladepiano3 жыл бұрын

    My 75 troopy is 99 model. I read somewhere that the year 99 the 1hz already has the stronger pistons and reduced compression rate... Is this true?

  • @dannovic
    @dannovic10 ай бұрын

    Awesome build! Were all the aluminum bits painted or sand/vaporblasted? Looks very clean

  • @mattluszczak8095
    @mattluszczak80953 жыл бұрын

    Hey guys what is the white assembly lube going on the journals and pistons. Is it lithium or something?

  • @davidhunt5631
    @davidhunt56313 жыл бұрын

    thank you

  • @madrx2
    @madrx23 жыл бұрын

    What a beautiful build guys, what is the rough cost of doing something similar to a 1hdfte (100 series) ? Reason I ask on cold starts i'm getting a bit of big end knock I think.

  • @MadGQ

    @MadGQ

    2 жыл бұрын

    It’s excellent ay

  • @phalanx3803
    @phalanx38033 жыл бұрын

    lol good thing my land cruiser cant see this or it would throw a hissy fit like a toddler in the Target toy section. so how much does this cost? with over 10,000 hours best guess is around 20,000 hours my 1HZ is in need of an over hall and a turbo.

  • @blackie75
    @blackie753 жыл бұрын

    Was it a forged piston upgrade?

  • @user-xn2wl5pc4n
    @user-xn2wl5pc4n3 жыл бұрын

    excellent 1hd toyota [talimpan] no1

  • @lusilk7954
    @lusilk79543 жыл бұрын

    top marks

  • @richardgrognard6394
    @richardgrognard63943 жыл бұрын

    bravo !!!!a less speedy video assembly

  • @Gemidrift
    @Gemidrift3 жыл бұрын

    What’s a full service like that worth ?

  • @FF-gc7ft
    @FF-gc7ft3 жыл бұрын

    I wonder, what is the gross cost for this type of engine?

  • @rudolpharya1907
    @rudolpharya19074 жыл бұрын

    Dyno?

  • @ianmoone2359
    @ianmoone23593 жыл бұрын

    What I saw was great. I would however question the wisdom of all that time effort & $ - but at the start you didn’t replace the core/Welch/freeze/expansion plugs in the block & head? Would be a real shame to have to pull the whole engine back out prematurely, to replace a rusted / corroded leaking original plug?

  • @touring1hz459
    @touring1hz4593 жыл бұрын

    Hey enjoyed the vid. Got a 1hz in 80series with 600000klm on it what would a rebuild like this be worth?

  • @phalanx3803

    @phalanx3803

    3 жыл бұрын

    how well is it running? if its running rough or lacks a lot of the power it use to have then it may be time for an overhaul. just make sure to go to some one with good reputation if its done properly and you take care of it easy 500k more.

  • @markmarkofkin
    @markmarkofkin2 жыл бұрын

    что за смазка,которую наносят на кольца и поршни?

  • @gonzalo4to
    @gonzalo4to4 жыл бұрын

    Awesome video! Subscribed. I would like your advice: I am looking to put a turbo on my Mitsubishi Montero 2.8 (4M40, N/A), rebuilt 2 years ago using internals for a 4M40T, including head gasket. Question is, do I have to change the injection pump to a turbo one, or can I get by using the stock N/A pump? Thanks mate.

  • @reece-diesel

    @reece-diesel

    4 жыл бұрын

    gonzalo4to the most important thing to do is to upgrade to injection pump and injectors for the turbo. So definitely upgrade them.

  • @bogged2theeyeballs695
    @bogged2theeyeballs6954 жыл бұрын

    Do these pistons use a 29 or 33mm pin?

  • @reece-diesel

    @reece-diesel

    4 жыл бұрын

    bogged2the eyeballs these pistons use standard sized gudgeon pins.

  • @karimdahab9082
    @karimdahab90823 жыл бұрын

    How much boost??

  • @mental2424logger
    @mental2424logger3 жыл бұрын

    Indirect injection engines are not really designed for turbo charging .. we know so this . So I’m wandering what did you redesign for this to be a turbo engine? Great vid 🤙

  • @thunderball1407

    @thunderball1407

    3 жыл бұрын

    Are you ignoring turbo petrol engines?

  • @jimmy2824

    @jimmy2824

    3 жыл бұрын

    The Nissan TD42 engines are all indirect injection, Obviously direct injection is a superior design though. One reason the Toyota's 1hd engines are so good!

  • @MrBmw323turbo
    @MrBmw323turbo3 жыл бұрын

    so what was actually upgraded????

  • @robertkopalakarate9620
    @robertkopalakarate96206 ай бұрын

    So can a 1hz cylinder head work on a 1hdt block with the pistons for 1 hdt

  • @reece-diesel

    @reece-diesel

    6 ай бұрын

    unfortunately not

  • @davidhunt5631
    @davidhunt56313 жыл бұрын

    ive got a toyota landcruiser with a 1hz diesel motor in it i was just wonding how much for this motor would be

  • @routeaustralia7000

    @routeaustralia7000

    3 жыл бұрын

    10-12k probably

  • @robertkiboi4325
    @robertkiboi43254 жыл бұрын

    Fantastic build. One question though: can standard 1hz pistons fair well with a turbo upgrade?

  • @reece-diesel

    @reece-diesel

    4 жыл бұрын

    Robert Kiboi I don’t recommend that, but some people are lucky. :)

  • @robertkiboi4325

    @robertkiboi4325

    4 жыл бұрын

    @@reece-diesel I'll take your word. Keep the videos coming.

  • @danielr6599

    @danielr6599

    3 жыл бұрын

    I’ve had turbo on mine for almost 70,000 miles with no issues. My next job is to redo the entire fuel system. 77 series

  • @phalanx3803

    @phalanx3803

    3 жыл бұрын

    depends on the turbo upgrade if its just a moderate boost standard will be fine as long a you dont flog it hard if its heavy boost or a moderate boost + more fuel its well worth the piston upgrade. its normally the more fuel part that catches people off guard even with upgraded pistons some people think its ok to just dump more fuel and end up blowing there engines.

  • @julianvelay5260

    @julianvelay5260

    2 жыл бұрын

    Pretty sure i saw standard looking pistons go in ?!??

  • @aarondowney5110
    @aarondowney51104 жыл бұрын

    Awesome work, what dose something like this cost

  • @reece-diesel

    @reece-diesel

    4 жыл бұрын

    Hey man, enquire on our Facebook page and we will be able to sort you out.

  • @nammmy1
    @nammmy14 жыл бұрын

    What brand of pistons are they ?

  • @reece-diesel

    @reece-diesel

    4 жыл бұрын

    reece cole mate there a complete custom piston. Can’t be bought like that.

  • @sajidhasan34
    @sajidhasan343 жыл бұрын

    Where inter cooler?

  • @one_final_cast6161
    @one_final_cast61613 жыл бұрын

    👍

  • @zero_to_1000
    @zero_to_1000 Жыл бұрын

    What can you use to upgrade the fuel system?

  • @reece-diesel

    @reece-diesel

    Жыл бұрын

    We can upgrade both fuel pump and injectors.

  • @brandonlopez5289
    @brandonlopez52893 жыл бұрын

    friend that needs to be changed or modified on the 1hz naturally aspirated engine to convert it to turbo

  • @ianmoone2359
    @ianmoone23593 жыл бұрын

    Because of video editing, you dont see what con rods are fitted to the new pistons? New rods, original rods? 1HD-T (FT/FTE) Rods? Why does that matter? The MAJOR difference between the Factory Turbo Motors from Toyota & the stock standard 1HZ is the Con Rods! The turbo motor, 1HD-T / FT & FTE, & the 1HZ difference - is that the turbo motors have con rods with a special oil gallery that the 1HZ’s DONT have. The Oil Gallery runs all the way up through the con rod to the top where the con rod wraps around the gudgeon pin that connects the piston. This gallery continues out the top of the con rod in what is called an oil squirter nozzle. Oil squirts out of the top of the con rod upwards onto the underside of the piston crown. The standard 1HZ’s DONT have this oil squirter feature to squirt oil under the piston crown. What is the purpose of the oil squirter con rod on the factory turbo HD/FT &FTE motors? That oil wicks heat of combustion on top of the piston, away into the sump, where the oil gets pumped out to an oil cooler & the excess heat is shed back to the atmosphere. The turbo motors, produce a heap more heat on top of the piston crown than the naturally aspirated 1HZ and it’s the job of the oil squirters to wick that heat away into the sump oil to cool it through the oil cooler before the aluminium in the piston crown starts to first distort, then melt! When you turbo a standard 1HZ and you don’t put 1HD-T / FT or FTE con rods with oil squirters in, you don’t get this under piston crown cooling. The heat of combustion under high boost pressures from a turbo under load can exceed 650Degrees C which is the point at which the alloy in the piston crown starts to “creep” then deform just prior to melting. This is why turbo motors you run EGT (Exhaust Gas Temperature) gauges to monitor the temperatures in the combustion chamber. If you rebuild a 1HZ without adding oil squirter con rods from a 1HD-T / FT or FTE, then you run the risk of melting pistons with high boost numbers once you get under load on a long uphill run with a load on. You need that oil under the piston crown, to wick away that excessive temps to prevent piston damage from excess heat. It’s NOT just as simple as bolting a turbo onto a 1HZ, they just don’t last like the factory turbo 1HD-T/FT & FTE’s that have the oil squirters. Seemingly the first thing many tyros do the moment they bolt a C26 turbo kit on their 1HZ is put it in to be tuned on a dyno & go for Max boost (40 pounds) to try and increase the fuel input to match and get Max HP. And for a short while it works, but it doesn’t last! The 1HZs were never designed or built to run turbo boost pressures and temps. Without oil squirter rods, oil cooler & a intercooler to keep temps down inside the combustion chamber, you will just destroy a 1HZ by adding a turbo. My 2C

  • @harveysmith100

    @harveysmith100

    3 жыл бұрын

    Excellent info

  • @beejoutbush3322

    @beejoutbush3322

    3 жыл бұрын

    I’ve heard this before. Very helpful. Cheers.

  • @BartSuykerbuykElbartos
    @BartSuykerbuykElbartos5 ай бұрын

    whats up wit the 20 passes on the block?

  • @andretorben9995

    @andretorben9995

    4 ай бұрын

    taking the block down to raise the compression.

  • @luiscastro3791
    @luiscastro3791 Жыл бұрын

    Which one is better the 1hz or the 1hd?

  • @reece-diesel

    @reece-diesel

    Жыл бұрын

    Thats a highly debateable matter! I like 1HZ's personally.

  • @zonavarbondagoo4074
    @zonavarbondagoo4074 Жыл бұрын

    How do you determine the point at which a 1hz is too old/worn to make adding a turbo viable?

  • @reece-diesel

    @reece-diesel

    Жыл бұрын

    The engine should be upgraded before turbo charging, but if your running on a budget I would suggest doing a compression test and atleast upgrading pump and injectors to suit also.

  • @andretorben9995

    @andretorben9995

    4 ай бұрын

    I had over 400 000 when i fitted my turbo kit. Up to 650 000 now and no issues at all. Original motor, never had the head off.

  • @EdgarSamoGudo
    @EdgarSamoGudo3 жыл бұрын

    RD? Are you from South Africa??

  • @reece-diesel

    @reece-diesel

    3 жыл бұрын

    No, we are from Sydney Australia. :)

  • @charlynkidiaka5493
    @charlynkidiaka54933 жыл бұрын

    Sais pas ce que la technologie futur nous réservera mais Toyota après son moteur 2H "6 cyl en ligne" rien de plus meilleur avec la venue il y a de celà plus de 30 ans le # 1HZ toute version jusqu'à ce jour par son régime, son accouplement, tour/din rien à redire un moteur magique. Depuis la RDCongo

  • @khairiebinsamad3118
    @khairiebinsamad31182 жыл бұрын

    I think my alarm,then in this video😆

  • @reece-diesel

    @reece-diesel

    Жыл бұрын

    HAHA not sure how that ended up in the video!

  • @MIGUELGOMEZ-og4yn
    @MIGUELGOMEZ-og4yn6 ай бұрын

    SALUDOS SOY DE VENEZUELA Y TENGO UNA TOYOTA FJ60 CON MOTOR 2F Y QUISIERA COLOCARLE UN MOTOR 1HDT O 1HZ

  • @reyes5407
    @reyes54073 жыл бұрын

    le cambia el sonido el turbo ahahhah

  • @JhonVargas-ql8bw
    @JhonVargas-ql8bw3 ай бұрын

    DESEO EL TRABAJO TENGO UN MOTOR 1HD FT TOYOTA

  • @nikhilchand7125
    @nikhilchand71253 жыл бұрын

    Just wanting to know if 1hdt turbo mani fits 1hz ?

  • @reece-diesel

    @reece-diesel

    3 жыл бұрын

    Sure does mate 👍

  • @markshort9098

    @markshort9098

    3 жыл бұрын

    You can get a adapter or make an adapter to fit a turbo also, apparently they are surposed to flow just as good as a genuine turbo manifold.. the adapters are available on eBay and it's just a piece of plate with holes to bolt to the stock manifold with bugle head bolts and studs to bolt the turbo on.. they are a couple of hundred bucks but cheaper than a new manifold but I'm cheap and will make my own and make it thicker to have room for a egt sensor fitted into the side of the adapter plate to get before turbo egt..

  • @gustavohidalgo6219
    @gustavohidalgo6219 Жыл бұрын

    Este topo de motor usa computadora

  • @iosiv.Stalin.
    @iosiv.Stalin.3 жыл бұрын

    Вечный двигатель

  • @user-qz3ei9ps6l
    @user-qz3ei9ps6l3 жыл бұрын

    А чойта поршня родные оставили? На шдт другие идут - с выемкой

  • @user-qz3ei9ps6l

    @user-qz3ei9ps6l

    3 жыл бұрын

    И ГБЦ родную. Тьфу а не турбовка

  • @craigcicolini3256
    @craigcicolini32564 жыл бұрын

    Wonder what that would've costed 🤔😳😂

  • @davetunbridge6637

    @davetunbridge6637

    3 жыл бұрын

    Had mine done 12 months ago. Had the turbo upgrade kit fitted. Pistons with thicker crowns, bigger n thicker conrods, bigger Gudgeon pins and had the pistons ceramic coated. New head, oil pump, alternator, 3inch exhaust from dump pipe back. All up around $8500.. Had the fuel pump rebuilt 2yrs ago so add another $2000. Also replaced the clutch for a heavy duty and an exchange gearbox from 360 gearboxes in Melbourne, it’s an upgrade box for towing. This is in a 105 cruiser. I’m comfortable with the spend as we own the vehicle which is set up for touring and to replace would have been out of our budget.

  • @ondrejmarko01

    @ondrejmarko01

    3 жыл бұрын

    Wow. If i would have to spend $8000+ I would like to have EACH AND EVERY bolt torque to specs.

  • @davetunbridge6637

    @davetunbridge6637

    3 жыл бұрын

    Ondřej Marko It was, my mechanic has been looking after my truck for nearly 15 yrs. I wouldn’t keep going back if he didn’t do things right. To replace the vehicle with a latter model, ie 200 series, with all the mods I’ve got on mine would have been way out of my budget comfort zone.

  • @davetunbridge6637

    @davetunbridge6637

    3 жыл бұрын

    @Henrich Muller it’s the old saying, you get what you pay for.

  • @PJ-James80

    @PJ-James80

    7 ай бұрын

    @@davetunbridge6637 did you have this rebuilt at Reece Diesel? How has it been over the last 3 years? Looking for honest feedback, I'm in Syd and think my HDT may need a rebuild

  • @alexanderk3490
    @alexanderk34903 жыл бұрын

    Охуенно!

  • @beaconflix6390
    @beaconflix63904 жыл бұрын

    1HZ no more, its now 1HDT

  • @cruza1289

    @cruza1289

    4 жыл бұрын

    no its not a 1hdt has complete different fuel system and is not pre combustion chamber like the 1hz are

  • @davetunbridge6637

    @davetunbridge6637

    3 жыл бұрын

    Cruza 1 correct, Toyota released a 1HZ-T in Japan so the upgrade kit is from Toyota

  • @Hitman-ds1ei
    @Hitman-ds1ei3 жыл бұрын

    Well that was anticlimactic, no detail on any engine upgrades or anything, basically watched someone rebuild a motor and bung a turbo on, excuse me if I don't get excited

  • @abdonmorales7361
    @abdonmorales73613 жыл бұрын

    As soon I hear that ugly music I stop watching instead make some tools noise its better or some explanation

  • @reece-diesel

    @reece-diesel

    3 жыл бұрын

    Use the volume control

  • @abdonmorales7361

    @abdonmorales7361

    3 жыл бұрын

    @@reece-diesel nope if I want to hear music I watch music videos

  • @reece-diesel

    @reece-diesel

    3 жыл бұрын

    Fair enough. I’ll see what we can do.

  • @jayromas5385
    @jayromas5385 Жыл бұрын

    Not showing any content on how .total bushit

  • @khadaryusuf3397
    @khadaryusuf33972 жыл бұрын

    I need this engine Please contact me

Келесі