1999-2004 MUSTANG INTERIOR REFRESH | PAINTED!
Автокөліктер мен көлік құралдары
In this video, we show you how to apply adhesion spray and paint the interior plastic pieces on your car! In this case, we painted a 2002 Mustang GT Patriotic Blue! Hope you enjoy and please check out our SOCIAL MEDIA AND MERCH !!! LINKS BELOW
INSTAGRAM: ratchet_wre...
MERCH: teespring.com/stores/ratchet-...
Пікірлер: 109
Nicely done gentleman
@arkangel113080
Жыл бұрын
They look horrible , 😢 You kill this Mustang Echo Divy
The trims turned out pretty good. That’s crazy the spray paint cans are out in the open. Here in AZ they are locked up in cages and you have to have someone unlock them for you.
@RatchetWrenches
5 жыл бұрын
It depends on the store in jersey but at walmarts here they do lock them away.
@GermanEliteTuning
5 жыл бұрын
Ratchet Wrenches ahh ok cool. Keep up the great work.
@RatchetWrenches
5 жыл бұрын
Thanks!
@nvus6731
4 жыл бұрын
People here use real drugs lol😜
Great paint job! Looking forward to beautify my 2004 V6...
@RatchetWrenches
4 жыл бұрын
joejoezidane thank you and yeah we wanted to spruce the interior up a little bit
Not sure if you did it but make sure you throw some clear on it. Maybe satin clear. It will cut down on the gloss unless thats what you want and would protect it for a bit longer. Eventually that stuff will wear off just through daily handling but the clear would prolong it.
@RatchetWrenches
5 жыл бұрын
Yeah we’re gonna do a clear coat on top of it, we just wanted get them in for the time being. But yeah definitely gotta do that
Nice job im doing it to 2000....luv this vid
@RatchetWrenches
4 жыл бұрын
Thank you so much! And nice I bet it’ll look good
Came out good bro👍🏼
@RatchetWrenches
5 жыл бұрын
Thank you! Stay tuned for the headers we’re putting on this weekend, subscribe for more!
Looks good. Saw this just recently but ya, the vents pop out on the radio bezel and I also taped off the outside trim on the shifter bezel so the lines still match from the dash into the console
Nicely done
@RatchetWrenches
5 жыл бұрын
Tim Hoolio appreciate that!
Vents are super easy to get out, you push them out from the back side. I took mine out to install gauges so let me know if you need replacements
@RatchetWrenches
4 жыл бұрын
Will do thanks for the tip!
@James-es1fg
4 жыл бұрын
Can I buy your vents?
You guys are funny to watch
@RatchetWrenches
5 жыл бұрын
Thanks!
Personally I like the black better but it honestly is well done
@RatchetWrenches
3 жыл бұрын
Thank you. I’m probably going to go back to the black or maybe carbon fiber
I would have done red on the black car personally but it looks good. Just a tip if you ever have to do it again you can pop those vents out and you dont have to mask them
@RatchetWrenches
4 жыл бұрын
Yeah red and black is a killer combo not gonna lie. But yeah originally we were gonna pop them out but when we tried too (off camera) the kept popping and we didn’t want to break anything. We hate plastic lol
@tomnagel8651
Жыл бұрын
P
Did mine in ford blue very close to this
@RatchetWrenches
2 жыл бұрын
Sounds very cool! I'm sure it looks sharp
That blue looks freaking good
@RatchetWrenches
4 жыл бұрын
Thank you! Yeah it’s different and unique
No scuffing or degreasing the trim first for the paint to stick?
@RatchetWrenches
2 жыл бұрын
Nope this was just a temporary thing
My mustang's body color is electric green. Any ideas on what color I should do my interior trims?
@RatchetWrenches
3 жыл бұрын
Hmm that’s a tough one honestly it’s whatever you’re feeling and whatever color your interior seats are etc. I’d google it and that’s what will really give you ideas
@roberthamilton8024
3 жыл бұрын
Yes, do nothing. This video showed clowns wrecking a future collectable. They over sprayed the vents and ruined the interior.
At first i thought it was gonna be tacky but it came out pretty nice!
@RatchetWrenches
Жыл бұрын
Thanks! Yeah not too terrible for a rattle can job
We need more mustang content
@RatchetWrenches
4 жыл бұрын
We plan to deliver it! If you haven’t done so already we just dropped a video the other day about removing the mufflers 😬
@mxlevi8266
4 жыл бұрын
Ratchet Wrenches yea I just watched it I love these mustangs plz do more diy stuff like maybe the brake calipers and the mustang logo paint them that blue 🥶
@RatchetWrenches
4 жыл бұрын
Thanks for watching, and will do! We actually just ordered some gears so we’ll have a video coming soon. But yeah we can do more tutorial DIY videos for sure (calipers and other stuff)
I wanna do mine red what paint did u guys use? N did u have to prime it
@RatchetWrenches
2 жыл бұрын
We used a plastic adhesion promoter to get the paint to stay on the plastic. We didn’t prime it since we used that. But you can prime it if you’d want to. the paint we used was for all types of surfaces including plastic
I'll do white
@RatchetWrenches
5 ай бұрын
Everyone has their color preferences! I'm sure a nice clean white would look great
The vents are stupid easy to get out. They just pop in with a plastic clip. Point them down and pull down until they pop. Then you can pry them out
That looks awesome I did the same? I always get complements
@RatchetWrenches
4 жыл бұрын
Thanks! And yeah it’s something to make the interior pop for sure!
The vents for the ac pop out so you don’t have to tape over it it made it a lot easier for me
@RatchetWrenches
3 жыл бұрын
Interesting thank you for that input!
Hey man quick question what was the first can you sprayed ?
@cristianmarchante3592
3 жыл бұрын
And what kind of paint did you use
@RatchetWrenches
3 жыл бұрын
We used first an adhesive promoter to help the paint stick to the plastic finish. And I can’t remember which paint we used tbh. It was from Lowe’s tho
@cristianmarchante3592
3 жыл бұрын
@@RatchetWrenches thanks man just need to figure out that first spray I appreciate bro 👌🏻
hey man hows this holding up? and where did you get that cup holder piece please? thanks
@RatchetWrenches
Жыл бұрын
The blue paint held up okay. I ended up removing it and hydro dipping it a carbon fiber a few months later. The cup holder piece came with the car when I bought it
@Fiddler90s
Жыл бұрын
@@RatchetWrenches thanks man!
Since it’s been a while, how is the finish holding up? Any regrets or things you’d do different?
@RatchetWrenches
2 жыл бұрын
We ended up hydrodipping everything carbon fiber. Looks better. Wasn't a fan of the blue and it started chipping
Wait what’s the clear paint he sprayed firsts
@RatchetWrenches
4 жыл бұрын
It’s a adhesive promoter to help the paint stick properly to the plastic
Cmon man ! Please change it back !
@RatchetWrenches
3 жыл бұрын
Haha don’t worry it’s either going back to black or carbon fiber. This was just to change it up and see how it looked
hi, guys, I am going to buy a v6 mustang. please suggest me best model 2004 or 2005
@RatchetWrenches
3 жыл бұрын
Those are 2 different body styles of mustangs so it is really up to your preference
@Peachee32
3 жыл бұрын
V8 4.6L 40th anniversary 2004 mustang or get a Mach 1 2004
Graphite grey or dark silver
@RatchetWrenches
4 жыл бұрын
I actually like the graphite grey idea, was thinking of wrapping these parts so maybe I’ll do it those colors
bro what the vents are mad easy on the new edge they just pop right out. atleast you masked them
@RatchetWrenches
2 ай бұрын
I know we were being stupid 😂 ended up coming out alright but ill probably end up buying some nice carbon pieces eventually
I popped mine off to install a new head unit last weekend, and my trim panel was pretty old and crusty, and it broke into 5 or 6 pieces, they’re expensive as hell on LMR…
@RatchetWrenches
Жыл бұрын
Yeah Ford really cheaped out on the interior trim of this generation mustang. Might as well go carbon fiber!
I’d do red for sure
@RatchetWrenches
4 жыл бұрын
Yeah everyone has a certain taste for sure, red wouldn’t be a bad choice tho
Black interior or grey?
@RatchetWrenches
3 жыл бұрын
Grey
Good days when you ain’t had to wear a mask when walking in
@RatchetWrenches
3 жыл бұрын
Right the hood ole days 😬
Wouldn’t the paint come off easy?
@RatchetWrenches
4 жыл бұрын
You would think yes but surprisingly it hasn’t yet 🙏
That's what I did to mine lol I also did the front defrost vent under the front windshield (pops right out) and the dash gauge cover (comes out with just a few screws)...I like how you guys work together to get a job done, no matter how hard or simple...kzread.info/dash/bejne/d5qBz9qzo6bTcag.html
@RatchetWrenches
5 жыл бұрын
Appreciate that once again! And I’ll check the video out now!
Doing this. I have the tan conv and interior. Anyone fav video.
why blue i dont mean to hate on it just why not a darker blue
@RatchetWrenches
Жыл бұрын
I honestly wanted a darker blue but the color in the store was a little deceiving. It's hydrodipped carbon fiber
Paint job was good no over spray or anything nice 👍🏽, but that does not look cool on the interior looks funny
@RatchetWrenches
Жыл бұрын
Thank you! And honestly yeah we realized it after we painted it, we currently have the interior carbon fiber now
Shoulda kept it black
@RatchetWrenches
5 жыл бұрын
I can always change it back
Tacky and ricey
@steverichardson7417
4 жыл бұрын
Especially with the overspray and runny paint.
The first customization on the way to the junkyard. Oh, you kids.
@RatchetWrenches
3 жыл бұрын
It was a cheap solution to spruce up the interior. You should watch our latest videos we installed headers, cams, gears etc. it isn’t going to the junkyard anytime soon😬. Soon to not be NA. I don’t appreciate the negative comment. It’s our own car we have our own vision for it.
This the opposite of how to paint plastic pieces...
@RatchetWrenches
2 жыл бұрын
Noted
I ain’t goin lie it’s not it bro sorry
@RatchetWrenches
3 жыл бұрын
Yeah I know haha we already changed it back
horrible done....jesus
@RatchetWrenches
4 жыл бұрын
Matt Gigante turned out great so. Also your spelling is horrible. If you knew proper grammar it would be spelt “horribly done”
@hyltenn
3 жыл бұрын
Y’all always got sum to say about something that ain’t even yours that shit is pathetic