Richard makes all this transmission rebuilding look easy!!!!!!!!!!

I absolutely adore this channel, the family and I obviously cannot forget tje beautiful Miss Annie! This particular tear down and build I find especially fascinating. It is giving me a bit of an inside as to what tje C6 auto to my 66 bird. I continue to learn with each video... THANK YOU!🙏💜

Richard is,a wealth of knowledge. Actual transmission rebuilders are getting more rare. Kind of like raidiator shops.

I rebuilt a C4 for a friend of my dad and it last two weeks, because the wife totaled the car.

First C4 I’ve seen since 1984.

Good to see Richard back on the KZread. I got help from his videos some time ago, just enjoying the content and learning since. A+

Awesome thank you, can we have an C4 assembly video PLEASE

I did a c4 on my kitchen floor years ago when I was broke It lasted until Isold th e truuk

Pretty enjoyable watching an expert work his craft. Thank you!

I just finished my first C4 rebuild

Also the 67 c4's were all screw in modulators from the factory. Again push in started around 72.

At 36:50, the bellhousing that bolted to the case,(not to the pump at all), was originally for a truck or van application. The wider bolt stance and not being attached to the pump made them stronger in 2 regards,(pumps leaked less and motor connection was stronger). Then they made the C-5 (lock-up torque converter version) that also had the bellhousing bolted to the case.

@richardteresacricheducatio3542

26 күн бұрын

@@johnrussell6620 a lot of people didn’t know the C5 transmission even existed

@johnrussell6620

26 күн бұрын

I wish you would have read my 46 minute mark comment as well, about the parking pawl and the 42RLE transmission.

Saw you and the Dirty Bird at the flashlight races on 7/6 your car looked great the track wasn’t great but you managed to get that monster down we went to the semi finals in true street and crossed over for a loss but it was a good day car has had some pretty major changes and still managed to make some passes

@richardteresacricheducatio3542

23 күн бұрын

Yes it was good day of racing

@hotrods4x4s18

22 күн бұрын

@@richardteresacricheducatio3542 I was the guy by the track shop on the return road in the Mack Toter silver fox body that the Turpen’s own you gave me a thumbs up been wanting to meet you for a while but we were too busy that day

@richardteresacricheducatio3542

22 күн бұрын

@@hotrods4x4s18 lots of things going on for sure

Takes me back to the good old days. Again I Love your content. Keep up the good work ❤❤😊

Nice shop. Lots of us could use one of those to work on some of our old vehicles with TLC.

If there is one thing that impresses me is someone who can blow apart an automatic transmission and rebuild it like Richard does. I’ve always wondered how the engineers came up with the design for the automatic transmission. I know it’s just fluid and pressure but all of those check balls and assorted spring loaded parts make my head spin lol

Thank You - very Basic_ Clear_Thorough_&_Educational ⚡

🎉I love you 2 and Annie as well, keep up thevgreat stuff uall❤

I had a 1964 Farlane 500 Wagon (Inherited from my parents) 289 and C-4 they had it rebuilt and it went out again. never ran rightafter that the Traz shop said the wagon was to big for the Tranz. I never bought that. My parents bought it new and only rebuilt the tranz once two years before I got it. it didn't make since to me 14 year after the car was bought new trans rebuilt I got the car in 1976 and it went out about two months after I got it. lost $500 on that car. love it.

Alway a pleasure to watch you guys work. Awsome to see an old Mustang brought back!!!

Thank you for the great videos! Learn something new every time.

@richardteresacricheducatio3542

Ай бұрын

Glad to hear that

Who can't help but admire the transmission knowledge that you possess. Not to mention all the tricks you have learned that are not in any books. Best wishes to your mother, hope she has a swift and complete recovery. I went thru a similar situation with my 94 year old father. I need some advice. I have a 71 Cutlass with a TH400. It's not exhibiting any problems, but I think it's time for a filter change. What type of gasket do you recommend ? Keep up the good work, see you in the next video. BTW, your camera person does a great job!

@richardteresacricheducatio3542

Ай бұрын

Thank you very much

Great video enjoy seeing the tear downs and finding the issues!

Sending along thoughts and well wishes for your ma! Thank you for taking the time to help teach others.

Nice video Richard and Teresa.

In the aerospace industry, we heilicoil everything from day one new.

Hi Richard and Teresa, good to see you're "back at it". hope the healing goes well._Dino

Enjoying your videos!

After watching many of your teardowns on the chryslers and ford's, I've always found it interesting how similar they were

Thank you, Thank you, Thank you... for sharing a life's time of hard earned knowledge. P.S. I love the way you dote on Theresa. You are truly a good man.

Hi to both of you. Another cracking video, good to see you back in action, simply the best!

New sub here! Thanks for the video!!

@richardteresacricheducatio3542

20 күн бұрын

@@Daves_adventures4315 thank you we are very excited to have you board. Stay tuned for some more excellent videos. Richard

Been a while since I've been inside a C4. Cool little trans indeed. Best wishes for your mom. Thanks for the video.

Glad I found the new channel. I have a C6 that leaks the fluid out when the car sits for an extended period. Some say the convertor is draining back into the case and just start the car once a week. Sounds like a band aide to me. Seen this before ?

I have plenty of time to watch videos, I'm retired lol. Good to see another video...starting to have withdrawls lol.

Great video for us Ford guys. I would love to see you build one of these all out, like trans brake, aftermarket planetary’s killer everything. Might have to add it to the list I some day will have to drop off to you on my way to Kansas from Phoenix 😜

I love the c4 and c6 easy simple and effective transmissions. Isn’t there a filter in the valve body in the supply hole. Great bracket race transmissions imo. Great to see you got a c4 in keep it up love your videos.

I watch all this guys videos and I haven’t a clue what he’s doing

That is not the original transmission to that car. The 1967 C4's all had the vent tube on the side fastened with a little bracket to the servo cover. When the vent is on the tail housing I think that started around 71-72 somewhere in there.

@GaryH-pw9cm

Ай бұрын

The push in modulator was used in the later transmission case. Also, the snap ring is not the correct snap ring. Should check the torque converter as it may not be the correct one for this transmission. There was an early 65-69 and late 70 and up torque converter. Also I would check the locator pins in the engine for the bell housing. They may be missing. Also the blocking plate may be missing causing converter problems. There are different blocking plates. There were several different flex plates used over the years also to add to the confusion. 🤔

Thank you bud

I've experienced those vacuum modulators failing with huge huge clouds of smoke from burning transmission fluid also there's no way that thing only has 77000 miles... lol

Thanks for the C4 video👍

at 46:10, the rooster comb pushes a pin on the park pawl linkage. On newer units I have found a bushing on that pin to make it fatter causing more 'push' while in park. There is a lot of room for the linkage to move away during drive selections so no problem for the pawl being too close while moving. Thanks for this video! I have never seen you do a 42RLE, Can you soon? Please!?

start off with 6 or 8 I put a c4 in my 63 xke jag olds flexplate to space out to the starter then ford 6 and converter, shelby valve body bought from Art Carr. Early jag non synchro low the faster you went the longer to shift. kept loosing clutches, had to pull the front end and engine to change and wife did not like stik anywy. worked good

Richard lovessss to get the check balls and fan the clutches

I can put you a ductless mini split in that garage and keep you cool. You buy it and I'll install it.

Cn you do an assembly video on an older unit like a C4, powerglide or Turbo 350 ? That would be very interesting to watch

I like you’re a book guy too. I wonder what Teresa would think stinks worse burnt trans or burnt up starter. I rebuild starters and alternators and man I’ve had some bad ones, that burnt electric motor smell gets stuck in your nose all day.

@robertwest3093

Ай бұрын

Me too! Computers will never beat books when it comes to older cars.

a mad scientist !!!!!

HEY Richard, , i just got a 1976 F150. Upon checking the fluids i thought tranny was low idling warm, off the fluid was only about 3/8 inch up the dipstick, , so i added a couple maybe 3 quarts . It shifts into gear very hard/positively but after a 30 minute testdrive on a hot day it now seems to be possibly a quart overfull. is this a serious problem to remedy asap before i damage it somehow?

@richardteresacricheducatio3542

13 күн бұрын

A quart is quite bit so I would definitely be getting it removed always check hot

Yes I have changed fluid and filter on one back in the 80's and no problem with it. Got involved with a FMX transmission and what a nightmare. So the neighborhood kids decided to set the '74 Torino on fire 🔥 so I didn't have to deal with it anymore 😂.

Hello, are you by chance still rebuilding customers transmissions? looking to get some work done.

Someone has been in there , being a 70+ type. Definitely not a 67 Some one already removed the servo release checkball Shift lever fitted on wrong also Awesome tip on testing sealing rings

Mmmm the smell of money lol!

👍

Richard, would you do a video on how to r&r bushings?

I heard about one old Transmission Mechanic, who had an odd way to unstick Ford governors. He would drive the vehicle up to about 40 mph, then try to engage Park, the rattling would dislodge any crud in the governor. Me, I would never try that!

is the spline count the same at both ends of the out put shaft? I think they are but can't remember any more.. How is your shoulder doing.. I am looking at the same situation.. but I have left it so long they both need work.. as always great show.. you should be a teacher.. if I was running and Auto class your vid's would be mandatory material.. thanks Rich.. you make the old days come alive again..

@richardteresacricheducatio3542

Ай бұрын

No sir, they’re different count

@richardteresacricheducatio3542

Ай бұрын

This one was actually 26th spine going into the converter and different count on going in the forward drum

@tinkmarshino

Ай бұрын

@@richardteresacricheducatio3542 It has been so long.. I was of the old hot rod 50-70's fan group.. refreshing and rebuilding all I could get.. until I had to make up my mind if I wanted to be a mechanic or a carpenter.. Being a carpenter won out.. I final had to quit cars all together when I reached 69 because of my shot body the pain wasn't worth the fun any more.. thanks guys for all you do.. I truly love this show of yours.. it brings back memories of some of the good times in my life.. Carry on!

They an old trans now, parts be getting light on the ground.

Fluid leaking through the Vacuum hose through the modulator control and a busted speedo gear. Already been out at least once. Only 77000?

Title says 1976, that is a 1967

So, what does the colored band indicate on the modulator? Shift point? Shift strength, etc?

We're we can get this books and these books have also new model transmission and valve body data

Smells like money !!!

Where is your shop located? Can we ship our transmissions to you to get rebuilt?

what fuild do you run in your performace builds ??

@richardteresacricheducatio3542

Ай бұрын

I went with the Dexton six fully synthetic Sonnax recommended it for my new gear train

@RussellCompton-fh3gr

28 күн бұрын

@@richardteresacricheducatio3542 thanks

Hmmm. looks like a bit like an A4LD precursor. Was it built in France? I don't know where the C4s were actually built but their carry-ons were French. I'm too young at 55(LOL) to know the history of the C4. But I do know the A4LD. Was it Livonia? Doubt it but not sure. Where were those things made? Ford based the E4OD on the center support bearing(the tiny, little, insufficient bushing in the output shaft on the A4LD. Did it work? Nope! It is so much fun to see the originals and know how things evolved for better or worse. Ford borrowed way too much from the old to make the new. Respect to the old and regret that they based the new on it. 25 Year retrospect. :)

@GaryH-pw9cm

Ай бұрын

I think the C3 was made in France. It was an odd small automatic transmission.

76? 67? oh we'll...

Dont most fords have forward motion issues 😂🤣👍🙀

76 or 67 ?

Richard, back in 67' who made a better AT? Ford or Chevy?

@Garth2011

Ай бұрын

When GM started their TH350 and TH400 is when they were king of transmissions. Even so, many liked the 2 speed Powerglide automatics from GM but I always preferred the 3 speeds.

@jackwells1452

Ай бұрын

Chrysler the 727 and the 904

@awesomearizona-dino

Ай бұрын

I put my Ford C6 into reverse at 60 mph, beside my tires hopping around, Zero damage to trans. (not intentional-sloppy shifter)

@waterloo123100

Ай бұрын

@@Garth2011I hate to break it to you but Ford Dodge and Gm had equally good transmissions back in the day

@Garth2011

Ай бұрын

@@waterloo123100 I believe the preferred make in the 1960's was the torque flight. Police and CHP vehicles preferred them as they could go from D to R without a lot of failures.

Ain't no doubt 💯. Teresa could rebuild a transmission ❤

I’ve never heard of a C-5 transmission??

@johnrussell6620

26 күн бұрын

Then you ain't been around son!

@user-zw7ww7kw9c

26 күн бұрын

@@johnrussell6620 You call me son because I’m so bright!!

@johnrussell6620

25 күн бұрын

@@user-zw7ww7kw9c I said son, not sun.

Where is your son at? Does he no longer work for the family business?

@jamesmedina2062

Ай бұрын

Summer vacation!?