‘Oil Reservoir’? Man, ‘goodbye’ sounds so much fancier in French. :)

@fernandoqueirozpopovic7024

3 жыл бұрын

I see what you did there

Wow. I was highly impressed with your idea of remaking the hand knobs with Bondo. Excellent method- I doubt I would have thought of it myself. I was thinking you would laminate circles of black plastic and cut them down with a ball cutter on the lathe and then insert the brash thread boss with epoxy in an oversized hole. I actually stopped the video when you smashed the old ball and began trying to think up how I would have replaced it. I even thought of using billiard balls! Your method was simple, direct tough and worked out quite nicely. I make small movie props for movie productions and am surprised I did not think of using the Bondo trick. Very entertaining and instructive. However, I believe I would have turned and polished the commutator on the armature. I would have also shaped the brush contact ends. But, that turned out not to be overly important. You did, after all, break-in the brushes and the motor ran just fine. Also, I would have likely used lithium grease rather than Preparation-H, a vaseline based, low temp lube. But, holy crap- look at your results. Fantastic. Excellent rebuild. Congratulations on a job very well done.

@frankierzucekjr

2 жыл бұрын

Billiard balls is actually a great idea. He definitely make this look easy lol.

Wow, I have one of these, it was my Grandfathers, then my Fathers, now mine, its in great shape as we take great care of all our tools!! Very nice restore!!

What made the cutawl special was that the blade could rotate in 360* With the chisel blade, a lot of lexan material could be cut (even the middle of the letters) w/o picking up a drill. Inside corners could be cut TIGHT.

@joehunt3512

4 жыл бұрын

I trust an old farts recollection better than a manual

@suep9445

3 жыл бұрын

I noticed that - and now I want one...

@DeannaEarley

2 жыл бұрын

Yeah, much more flexible than the current “fixed forward” jigsaws!

These videos are so fun to watch. Great job!

@HandToolRescue

6 жыл бұрын

Thanks! They are fun to make.

@drummer_1315

6 жыл бұрын

yes

@davisjames8484

6 жыл бұрын

Hand Tool Rescue great job keep it up proud of you

@mr_paakjaergamlegmail8594

6 жыл бұрын

john papple iBook

In a world of throw away stuff it is a pleasure to see these items brought back to life. Just shows the craftsmanship that went into them. A little TLC and they still work.

I have a Cutawl K-11 in the shop, I use it to cut gaskets with a circle cutter attachment. They're great tools. Great restoration!

When you smashed that ball with the hammer, I almost spit coffee all over my monitor. That was not just a surprise, but hilarious as well. Love your channel. Thank you for the content!

Thanks for not putting some free crap background music on, it is much nicer to watch a video without that constant audio harassment.

@VHflyboy

6 жыл бұрын

You mean you don't listen to royalty-free youtube music for fun?

@nicklaussen54

6 жыл бұрын

VHflyboy hahahha

@RHBengal

6 жыл бұрын

ditto!

@MrDanbecker

6 жыл бұрын

Agree

@CiscoWes

6 жыл бұрын

You don't like Kevin Macleod - Scheming Weasel? It's on a whole lot of videos as background music.

Another beautiful tool brought back to life. Awesome!

@k.mydeenk.mydeen7076

6 жыл бұрын

Hai

@SUMANGUPTA-xm7jd

5 жыл бұрын

NOT beautiful

@SVTJD

5 жыл бұрын

If your profile pic is of you, you look like a serial killer

If I had not seen it with my own 2 eyes, I would not have believed how you fashioned that ball. Amazing. Thanks for another great video!

I think you did an amazing job, and that's a wonderful tool with the blade rotation rather than rotating the body of the tool! The only thing I wished you'd done was run a ground wire to the base plate (inside the switch box). With all that metal, a ground is really a good idea. Thanks for doing this one!

@gabrielsyme4180

2 жыл бұрын

I bought one to rebuild. Planning on adding a ground.

Well done mate, we need more people like you in this world!

I have to admit, using bondo to make new knobs was a fantastic idea - Kudo's to you

@GetItDoneProjects

5 жыл бұрын

Yah, blew my mind. I"m gonna rewatch this with my kids just for that moment.

Somehow I had missed this fantastic restoration! There is so much good here, in the history, the technical aspect, and you are telling the project through video which you do so well. The best part for me was the peek-a-boo surprise near the end when you show the steam-engine style cam action which is such beautiful movement, but certainly envisioning and executing the Bondo handles was impressive. As a fellow restorer, I appreciated all the embedded tips. Thank you!

These are just so satisfying to watch! Especially at the end when you get a working antique.

@daviddonaghy6494

3 жыл бұрын

tim kenney I’m a working antique.

truly a beauty, a bonny and a joy for all

@JDevine687

6 жыл бұрын

Hello uncle bumblefcuk!

The best 23 minutes on KZread

Incredibly satisfying and relaxing watching someone restore

Very good, and thanks for showing the machine being used at the end too.

I like to see your work ... how you handle old mashines and how they look after you had them in you Hands ... awesome Job ... again ... 👍🏽

@karloherceg7514

6 жыл бұрын

Joe Kerr true

These is one restoration masterpiece I ever watch. It's not easy to do it. You are like Picasso doing art!

@franciscosalamanca8174

5 жыл бұрын

Joe Galaxy Harun Que buen trabajo saludes🇨🇴

@kuplung22

5 жыл бұрын

Not bad,but you must see this guy kzread.info/dron/MrMVIBtqFW6O0-MWq26gqw.html

@ptyo3892

5 жыл бұрын

Yeah...I am agreed. Not only a highly skill, he also have magnificent sense of art....👍👍

Really liked the body filler knob. It was a simple solution instead of a "over worked clear epoxy/wood with a real scorpion in it" knob. Great video!

@BARTeNARUTO

4 жыл бұрын

Plastic... I have been think to comment about this ... To be plastic free he had to make knob whit wood...

@DasShaten

4 жыл бұрын

Look if you know where to get an epoxy handle with a scorpion in it.... I need links is all i'm saying....

@KR-hg8be

4 жыл бұрын

@@DasShaten first one must catch a scorpion. Then the journey may begin....

That is really splendid how you restored that rotary jigsaw to working order. You got it looking a lot better as well. Great work.

Hows great & nice sharing this video thanks!!

Every single time you getting better and better love it thanks bro great job keep it up!!!

@HandToolRescue

6 жыл бұрын

Thank you! This one took a lot of work.

@TheKNOTTYMAN

6 жыл бұрын

PrepH?

@lar10101

6 жыл бұрын

shark's liver oil

@RFDeadKey

6 жыл бұрын

Lol I was just watching waterjet cutting when they had a prewar mechanical press can you fix that😀

@robbaiahsu

6 жыл бұрын

G o

This is one of my favorites of yours. Just a great little machine.

Now there is a tool that I'd probably use several times on just about every project I get into. Really a clever, unique and useful tool for detail cutting. Well Done.

Foam ear plugs... Why did I never think of using that. Thank you! Bet it creates a much better seal then what I was using often to plug holes before painting, Toilet paper.

Beautiful

I love watching these old tools have their souls restored.

Love it. Great example of a restoration. Especially liked the bondo Knobs. 👍

Was falling asleep to this video and the "fragile alert" about killed me!

@HandToolRescue

6 жыл бұрын

+Cloudslinger You have no idea how much pleasure comments like this give me.

@jurjanatimmermans

6 жыл бұрын

I had same problem lol greetings from Belgium

@IvayloMarkovski

6 жыл бұрын

almost died lol

@gile849

6 жыл бұрын

I have mini stroke

@gianbattista

6 жыл бұрын

ritorna a dormire tanto quello sai fare

Beautiful job! That’ll last another 100 years!

@SUMANGUPTA-xm7jd

5 жыл бұрын

It won't make past one of it's used

@csorrows

5 жыл бұрын

Not with Preparation H in the crank case it won't. WTF.

@larrypostma2866

5 жыл бұрын

csorrows better than that Nutella that can e out of it

This is one of the coolest little machines i've ever seen!

Now I knew about first 20's century equipments. Great!! Thank for your videos

Oh I love the colours. It looks like it came directly from the factory. It is so beautyful. Really good job sir 😊😊😊❤

@HandToolRescue

5 жыл бұрын

Thank you!

Nice job, I used to use a very similar Cutawl (albeit a newer model). It was the rotary diemakers saw of choice way before lasers were affordable. Great to see it back in action 👍

One of the greatest videos ever! Your skills are sublime!

This turned out beautiful...you are truly gifted! Brilliant workmanship...especially on the guiding knobs...that was just plain cool 😎👍🏻

I really enjoy your videos. Taking something old and making it look new AND functional again is just awesome. Keep it up :-)

I have never seen one of those before. Fantastic job!!!

This was amazing! I love history and love old tools! Just found your channel and quickly subbed! Thanks for the hard work!

G’day another fantastic job the making of the balls was something else. Good one John😊😎

Very nice restoration! One thing I would have liked to have seen is the use of braided cloth covered wire instead of the lamp cord, but all in all very nice!

I wouldn't have given that thing a second look in the trash. If I had it after you restored it I would never let it go.

I've just discovered these restoration videos and MAN are they relaxing and satisfying. Yours are some of the best, as are "my mechanics" (although he only has a few).

That is so friggen cool! Just got into resterations and been hooked on the old tools. Very inspiring veeeery fun looking. Epic tool epic work.

применение в мастерской под сомнением ,вот в музей загнать...респект мастеру!

@ogiahuy8378

5 жыл бұрын

BÔN12310🖒🖒🖒🖒🖒🖒🖒🖒🖒🖒🖒🖒🖒🖒🖒🖒🖒🖒🖒🖒🖒

@Yadryon_Bobyor

4 жыл бұрын

эл. лобзик.

Nice machine, Nice job, i love the method of making the new knob, the preparation H helps the machine do piles of work. excellent. Tony, Australia.

@DavidFlores-cz4vu

3 жыл бұрын

How flammable is this guy's workbench at this point?

Of all the work you did on this, I love the two black ball handles you made.

Very satisfying watching your videos. Great to see old tools given a new life. Excellent work.

great job. I really like watching your videos as there is no talk, just action and you are very skilled. I have a 1970s hilti hammer drill lying in the corner of my shed if you want it?

@elshaghol9432

6 жыл бұрын

James Healy i want it 😂

I allways wanted a sewing machine that could cut wood

@lemau8458

3 жыл бұрын

amazing stuff buddy

As usual your attention to detail is second to none great work.

By all means, this thing looks like a transformed sewing machine. Very nice job, good that this kind of history do not rots away in a barn or gets thrown away. Thanks for sharing

And I thought lighting on power tools were a relatively new thing. Learned something new today! Thank you! BTW that jigsaw is amazing. Why don't they have something like that today?

@snelgrave101

2 жыл бұрын

Because no-one cares these days, the buyer doesn't care if he gets crap items so the manufacturer doesn't care about churning out utter shite, no quality control anywhere these days, sad but very very true.

An absolute delight to watch.

@HandToolRescue

6 жыл бұрын

+Ed Op Thank you!

@SUMANGUPTA-xm7jd

5 жыл бұрын

NOT

I was very impressed at your ability to put it all back together... I was lost after the first 3 minutes. Great Job!

@edswift4124

4 жыл бұрын

He's got it on video! So he can go back and look at it to see how it came apart!!

Excellent. A real restoration is why I really like watching your work. In restoration a thing should look like it just came out of the shop, no improvements, just the honest truth of this how it was before it got into the mess it's in now. A pleasure to behold your work, sir. Thanks.

You really deserve more subs these are great videos.

@HandToolRescue

6 жыл бұрын

+scyther1 Thank you! I already have way way more subs than I ever thought possible.

@mrhutt857

6 жыл бұрын

And now you have another. That was amazing. I restore antique locks as a hobby, and your video gave me some great insight into restoration techniques that do no harm. Thank you!

yay HTR uploaded!

I watch a lot of these videos with my husband, and most are pretty interesting to me. But what I was really excited about it I was born and raised in the small town of kent ohio!! I live down south now, but it always fansanates me the time and effort you put in to your work!! Thanks for the continuous great watch!!!!

Simply wow😀 ,This restoration 👏👏well done !

For me it's like an old movie... One, that you saw dozen or maybe hundred of times... You already know how it will ends... but you can't simply stop watching.

Amazing transformation from back when Black & Decker was a quality brand.

@jxavier3876

4 жыл бұрын

Greg Hanlon I mean this is a a useless tool nowadays

@Impreza_S206

4 жыл бұрын

now its just crappy cheapo plastic sold at target

You're an incredible person! I've been following your work, and it would drive me nuts trying to remember where everything went! Lol.

@calinguga

2 жыл бұрын

that's what recording yourself is for

I think it’s amazing how you don’t forget how to put it back together. Good job

@lurezpe8655

5 жыл бұрын

The video...

In reference to you being told not to remove the fragile wheel, I can attest that many "experts" deal with idiots constantly, so have become accustomed to telling everyone not to do this or that because only someone with their expertise and skill can accomplish such a delicate task. I've learned that an equal percentage of them are idiots themselves and have broken things they arrogantly believed only they could work on successfully. The moral to that story is, you always need to know the source of your information. That's especially true with the current methodology of education doled out at the university level. Trade schools are where you actually learn useful life skills. I guess that's why Mike Rowe is giving scholarships to those who attend trade school instead of the university. So, keep fixing things the experts can't fix, because it's just too difficult for them to do. We love watching you do the impossible. At least the impossible to those who can't think and don't understand the physics behind what they are doing. Thank you for sharing your gift with us. Oh, and my wife thinks I can fix anything. Just yesterday she told me I could fix the plastic lid to her mixer that broke in two pieces. I might, but is it worth it? To help her be happy with her husband of 43 years, it might be, but frankly, the time it would take me will cost more in lost revenue were I to work a little overtime than the price of a new mixer. Now to sell her on that idea. Not an easy sell... The type of plastic they make those lids out of requires more than I wish to worry about, especially since we lost the piece that broke off, and it contains half of the hinge. One thing I do is buy old, broken grass rakes if they are steel. Why? Because the steel "teeth" in the rakes can be used to make smaller tools, such as locksmith rakes, which I need now and then (hobbyist, not professional) and for this project, new blades.

@bashkillszombies

3 жыл бұрын

Nah this guy is deffo an idiot. Check all his content, 20-50% downvotes because he ruins antiques and calls it 'restoration'.

Nice, it looks like it might of have been a pattern cutter from the clothing/leather good industry where they stacked multiple layers and it's razor sharp blade could follow contours easily.

Bravo.... Great job! It almost looks like an older sewing machine!

That looks Tight! Nicely done.

i hardly ever watch anything longer than 10 mins on utube. but this is amazing from beginning to end.

AvE are you here? Look at this man, he is fixing stuff !

@stanleyroberts801

6 жыл бұрын

Green. Air. Denailer

That was an awesome restore and looks like a handy little tool, nicely done

Everything about your video productions is perfect. Lighting, camera work, pacing, graphics, and sound are all spot on. Please don’t change a thing. Thanks for taking the time to make such entertaining content.

Finally. A practical solution to cutting cardboard.

@ramabary

5 жыл бұрын

I use scissor.

@dmandc

5 жыл бұрын

He was joking

@drwhoscumrag

5 жыл бұрын

r/whoosh

@3-body-problem

5 жыл бұрын

I'm still using my pet piranha, Chompy.

@wray1104

5 жыл бұрын

While I expect that was intended as sarcasm, you're absolutely right - The CutAwl was intended for exactly that kind of use - on a scale that you couldn't accomplish easily with scissors or a hand-held knife: Think set and prop-making for theaters, stencils for painted billboards, etc. It's impractical to cut that kind of thing with hand-powered tools, and, it's also impractical to elevate them on stands to make clearance for a long penetrating blade like a normal jig-saw uses. The CutAwl can be adjusted so that you can just lay a sheet of material on the floor and drive it around to cut your design, without damaging the floor underneath.

Somebody needs to tell the Evapo-Rust folks that you're in the pocket of Big Bondo ;)

Gunk. I cleaned the engine bay of my car with the stuff, and the results were amazing, but it was few months before the smell finally disappeared! Great video! *****

Wow! You must know a lot of stuff to be able to restore such a cool old machine! Impressive! You have such talent. I wish I could learn these skills. Very fascinating.

в хорошее время живём, современный инструмент, химия всякая разная, молодец дядька дай бог тебе здоровья.

@Ness1279

4 жыл бұрын

Фёдор Мурзов - In English, please

That has an amazing amount of little parts and machine holes and dealies for a 1930's tool.

Excellent job! On the restoration of the cutall!

I’ve seen you do a lot of ingenious things while watching your videos but the way you made those two handles out of Bondo was just over the top fantastic.seeing that confirms it for me that you can fix anything.

Все таки,до середины 70х годов прошлого века,инструменты делали не только вечные,но и красивые. Мастеру-респект и уважуха!

👍🇪🇸 La máquina ha quedado muy bonita, y además de esa funciona muy bien has hecho un gran trabajo. Bravo👏👏👏

La cura con cui tieni pulito ed in ordine il tuo tavolo da lavoro è commovente! Ottimo lavoro

Esta es una restauración de las mejores que he visto. No como algunos que ensucian un ventilador,lo limpian y listo....... Enhorabuena,me quito el sombrero...

Just stumbled upon your channel by total accident, so glad I did. You're an embodiment of what makes youtube great as a medium, thank you. Modern power tools are great and all and offer great flexibility due to battery power, often offer more options that old tools etc, but realistically speaking they are mostly "plastic crap" and tools won't be around in 85 years (and wouldn't be worth/impossible to restore then). Very different story for a tool like this cutawl. Also, will you be my friend when the zombie apocalypse comes?

@MegaQuadguy

5 жыл бұрын

I hate these comments about all tools being plastic crap, you know what nothing has changed the covers went from tin to plastic and stoppers went from leather to rubber. You want a good quality tool spend good money.

Preparation H as a substitute for grease!!?? That's a first for me. Nice video by the way.

@wilsoncalhoun

4 жыл бұрын

The cooling and anti-inflammatory properties help keep high-speed, high-friction machine parts well within tolerances.

@tommypetraglia4688

4 жыл бұрын

It's an emoillient with lubricating properties, really any similar "preparation" would do but he was just messin' with us knowin some would think it's special then go tell their machinist old uncle ... lol👍😃

@ChuckHickl

4 жыл бұрын

Well you sound fortunate enough to have never had to use it. Otherwise, you'd know. Lots of maintenance wipes during a day of usage.

You are, if nothing else, insanely thorough.

Outstanding job!

seriously my favorite youtube channel to watch. keep up the awesome vids man

@HandToolRescue

6 жыл бұрын

Thank you! Maybe one day I'll restore my life.

@nicholastriana5803

6 жыл бұрын

+Hand Tool Rescue all you need for that is Nutella👍

@coxie230179

6 жыл бұрын

Nicholas Triana i may have to agree with you on that one.

@nicholastriana5803

6 жыл бұрын

+stuart cox hahaha hey can't get any better than Nutella

If only you had repaired the lamp holder as well.. such a great restoration effort, and then you stop five minutes before the masterpiece is finished..

Nice job! Love the bondo handle!!

Preparation H , that was funny as hell. great restoration!

How flammable is this guy's workbench at this point?

@76thMarauder

6 жыл бұрын

Very...

@dreadmireironbound8418

6 жыл бұрын

Mauro Molinero Its more likely to explode into a giant fireball

@tpobrienjr

6 жыл бұрын

SHH, it's a secret offshore site unknown to EPA or OSHA, or EU. He keeps it warm by burning MSDS.

@Panda-qs1sh

6 жыл бұрын

Its over 9000

@tiheich

6 жыл бұрын

9:47 Well that's dangerous enough

I'm surprised you didn't restore or replace the lamp holder. Still, excellent job.

@milanradak269

5 жыл бұрын

Lamp holder, seems like it's not finished without it

This is easily the second-best sewing maching router on KZread

Thank you for your superb Restoration of Jigsaw. It gets better life from your hands. 👌🙏