$15 Chainsaw will It work? Maruyama MCZ325
Тәжірибелік нұсқаулар және стиль
I bought this machine from a scrap metal shop for $15. I think I bought it to get some spare parts, I need. After I disassemble it, I realize that it can be repaired because it was made in Japan. I think this machine has already been disassembled. I replaced some parts that I can find in my city. Likewise, I'm sorry for some parts that I could not replace.
I hope you find this video useful and enjoy it!
Furthermore, I am happy to receive feedback, suggestions to improve myself.
!!! I'm sorry for the mistake if I did in this video !!!
Thank you very much for choosing to watch my video!
Have a nice day
Gear Show
Пікірлер: 157
After watching so many of your restorations, I am always amazed that you can wash all those screws and bolts in the same container and they still find their way back to their proper place. Even with video to review it is impressive. Cheers from 🇨🇦!!!
It's amazing how far people will go for content nowadays, it's hard to find something original without the word fake. Though, i appreciate all the hard work you did in this video.
@gear_show
Жыл бұрын
I'm so glad to hear that, thank you!
@user-hu2et3sd1t
Жыл бұрын
Оооооооооооооооооооооооооооооооооооооооооооооооооооооооооооооооооооооооооооооооооооооооооооооооооооооооооооооооооогоооооооооооооооооооогггоооооооооооооооооооооооггггг7ггоооооггггггггггггггггггггггггггггггггггггггггггггггггггггггггггггггггггггггггггггггггггггг7оооооооооооооооооооооооооооооооооооооо́о́ он он она любишь бог блог юг блог Боб знаю почему но ъ не знаю да то эх зэк хз хз что не знаю почему но не могу я знаю щдллллллллллльллллллллллллллшлллшлллллдллллллллллллллллллллллллллллллллллллллллллллллллллллллллллллллллллллллллллллллллллллддлллллдллллллдддддджжджжжжжжжжжжжжжжжжжжжжжжжжжжжжжжжжжжжжжжжжжжжжжжжжжжжжжжжжжжжжжжжжжжжжжжжжжжжжжжээээээээээээээээээээээээээээ́эх
@samsimarni8756
Жыл бұрын
@@gear_show rvfefefcc
The way it turns itself on the table at the end. 🤣 It's like "Look at meee, I am running again!" 😁
@walterruizdiaz874
Ай бұрын
ja ja lo mismo pense
And the Mr. Gearshow is BACK! Thank you for the video!
@gear_show
Жыл бұрын
You're welcome, Thank you for waiting :)
Great job, thank you brother. You are so talented
@gear_show
Жыл бұрын
You're welcome, thank you!
Super work wow wonderful You are awesome Thanks for sharing sir.
@gear_show
Жыл бұрын
You're welcome, I'm glad you like this video, thank you!
Another perfect video..👏
Beautiful restoration mister well done
@gear_show
Жыл бұрын
I'm glad to hear that, thank you!
Fantastic Brilliant job, well done
@gear_show
Жыл бұрын
Lovely comment, thank you sir!
Excellent work, too bad you don't have all the needed spare parts. I think that the chainsaw engine is the same as in your previous video for the restoration of the Ryobi ESK 3500.
@gear_show
Жыл бұрын
Yes, the same engine. The piston diameter is 38 mm while in the market available 34,36,39,40 etc...
i love the happy complete successfully chainsaw spinning at the almost end :D
piston and cyl will be fine, as long as the chrome finish in the cylinder isnt missing chunks. Ive fixed way way worse of bad scoring in 2 strokes and with some honing and new rings, the engine lasted many hard years later
@gear_show
Жыл бұрын
Thank you for sharing!
@ozguronal6253
Жыл бұрын
TRT tek
Excelent work ☺
@gear_show
Жыл бұрын
Thank you!
Como sempre ficou muito bom GearShow! Gratidão
@gear_show
Жыл бұрын
Fico feliz que tenha gostado, muito obrigada!
@juris.m
Жыл бұрын
@@gear_show what is the name of that little drill
Nice video i like the way u restore now a days if something gets old people unlike u only restore them others just trash them
@gear_show
Жыл бұрын
I'm glad you like this video.Thank you!
You are the best
grouse work mate and she,s a lovely runner afterwards and that fuel and oil ratio is pretty much the same one at 25:1 (200mls of 2 stroke aka 2 cycle oil) to 5 litres of Unleaded Fuel and here in the land down under we have that for our famous Victa 2 stroke mowers and cheers from Australia 🐨🐑🦘🌏
@gear_show
Жыл бұрын
Thank you for sharing!
Good job 👍👍👍Thank you for sharing. Be safe 🇨🇦
@gear_show
Жыл бұрын
You're welcome, I'm glad you like it.
Really nice work and interesting video 😎
@gear_show
Жыл бұрын
I'm glad you like this video.
Unbelievable work
10:50 ну да, шлифовка поршня это прям то, что даст ему лучше работать. На поршне задиры. Держу пари и на цилиндре задиры. Цилиндр нужно расточить, поршень поменять на новый.
Wish I could find a chainsaw that need a little love to get it back running
Nice restoration, wish I was closer to you, I have one about the same condition.
@larrykelly2838
Жыл бұрын
@@E-hab I might try but I lack a lot of the tools.
@gear_show
Жыл бұрын
I'm glad to hear that, thank you!
xem đến quả dép lào và ghế nhựa em đoán anh là ng Việt, em xem rất nhiều vieo của a và luôn có cảm giác thân thuộc như thế, video rất tuyệt vời, chúc anh ngày càng thành công!
I am missing your video so much, where are you from ? I am hopping to can watch your new videos every day 😁🙏 Have a good day Mr. Gear Show
@gear_show
Жыл бұрын
I'm so happy that you love my videos, I will try to upload video much as possible. Thank you!
@MYs0708
Жыл бұрын
@@gear_show thank you so much Lord Gear Show, I'll waiting your new video 🔥🔥🔥
Business card is perfect for mag gap
@gear_show
Жыл бұрын
Yes, you're right, thank you for sharing!
wot sort off creatares wile you do sugary on wif dis big spining nife ?
Dobra robota👍
@Zedd44
Жыл бұрын
Polska Górą pozdrawiam z Mazowsza
@gear_show
Жыл бұрын
Thank you!
Perfect Video, Thanks!
@gear_show
Жыл бұрын
You're welcome, thanks!
Chainsawman pochita reference? 😝
@gear_show
Жыл бұрын
:) is it help?
Baggus bro 👍
Nice job!
Wow comgratulation
Very nice work G.S..
@gear_show
Жыл бұрын
Thanks
Ну да, ну да, задиры на поршне шкурочкой шлифанул и довольны в двигатель поставил. Хорош!!!
@user-ll3ud7zj8z
Жыл бұрын
А вы как делаете в таких случаях?
Impressed.
@gear_show
Жыл бұрын
Thank you!
It’s perfect
@gear_show
Жыл бұрын
Thank you!
Excellent video. In my experience the crankshaft oil seals should always be replaced when you have the engine apart. That makes a big difference to the running of the motor.
@gear_show
Жыл бұрын
Okays, I got it, thank you so much for sharing.
Beautiful restoration 👍
@gear_show
Жыл бұрын
Thank you!
Лучший спасибо за потраченное время!!!
@gear_show
Жыл бұрын
Не за что, я рада, что тебе понравилось.
@user-gu7kl9eq4j
Жыл бұрын
@@gear_show вы за шлифовали задиры на поршне наждачной бумагой, а так зачем вы его вставили его в цилиндр, вставьте это отшлифованый поршень себе в очко
Всё вроде нормально, но нахрена было лезть наждачной бумагой в цилиндр? Его и кольцо жрать же теперь будет.
What do you think caused the piston damage? Could it be because someone used straight gasoline instead of mixed fuel?
@gear_show
Жыл бұрын
Yes, It may be like that.
Would someone please tell me what happened to the gas tank I didn't even see that come out or go in and what about the oil tank I think I've seen enough of these
Nice to see a properly done saw rebuild. Nearly as I learned at trade school 40 yrs ago. Regardless if the saw had been used much (which it showed little signs of) and/or had been sitting for yrs (ie the spider web) the second thing I had done (after replacing the carb membrane and the plug) would have been to replace the gas pick up filter/weight + the gas line inside the tank. It notoriously clogs up. I'd also checked/cleaned the entire oil line to the sword/chain, and would have split the carb more and checked/changed/cleaned the valves and small internal filters. Finally, I had also taken apart, cleaned and greased the starter's spring coil. The housing always get full of debris and easily stops returning the cord.
@gear_show
Жыл бұрын
Thank you for sharing!
You are very brave! I'm sure, You didn't see flying clutch straight in head.
Muito bom
@gear_show
Жыл бұрын
Thank you!
good👍👍😘😘
@gear_show
Жыл бұрын
Thanks
That red thick he put on the end of the bolts when assembling the engine, was it grease or glue for bolts?
@roberts1938
Жыл бұрын
@@E-hab Thanks!
Reminds me of pochita 👍
great !
SUPER 💯💯💯💯💯👍👍👍🤝🤝🤝
Damn near the same as the Ryobi saw u did.
you have far more patience for that than I do. I’d have simply gotten a new one. I’m sure it will work again.
@gear_show
Жыл бұрын
It took me over a month to restore it. Finally it works. Thank you!
Один из не многих который реально реставрирует и восстанавливает.
Nice job, master!honestly, I thought you are Japanese. How old is this one? I own a modern one. From Ukraine with respect.
Super I'm from India
@rockykartik787
Жыл бұрын
Best video
@louiswetzel1578
Жыл бұрын
@@rockykartik787 who?
@gear_show
Жыл бұрын
Thank you!
Ремонт качественный, но роршень надо было менять!
Kato cqlo mashinata e dobre zglobena , no ne se izchaka da zagree , che da se regulirat niskite oboroti , i izbshto ne sa regulirani visokite oboroti !!!.
Zeliwny cylinder?
😊😊😊😊😊😊😊
Chain shouldn't move at idle. Idle is set too high at the end.
@gear_show
Жыл бұрын
Yes, you're right, thank you!
Husqvarnyama 😄
that is a carb issue so it just needs a carb adjustment.
How much brother?
Nice work brother. Can you please tell which tool ( drill) is that ? Where you bought it from ? Can you share the link ?
@gear_show
Жыл бұрын
It is makita 7.2V impact driver.
how do you tink is da best playar at a werld cup is it fill phoden or a look shaw ?
What is that small driver you use a lot? I'd be interested to know as it looks useful
@gear_show
Жыл бұрын
It is 7.2V makita screwdriver.
how did you find out that the gap was too close and it wasn`t an air leak or any problem with L screw when it was running erratically because I would have never thought of that?
@gear_show
Жыл бұрын
I asked professional repair man
@Ex-fk4nr
Жыл бұрын
@@gear_show He is very skilled....thanks for reply and nice video
Süper bir iş çıkarmış
6:38 what is that powder you use for cleaning? regular detergent?
@gear_show
Жыл бұрын
It is regular detergent powder.
👌👍👏
how can he do that 👍👍👍👍😘😘😘😘
Как новая!
@gear_show
Жыл бұрын
Благодарю вас!
At 15:30 what is that yellow hole for? Does it let lubricant out for the chain?
@gear_show
Жыл бұрын
The chain oil from flow from that yellow hole.
Your idle is too high. Either that or your clutch is in need of a new spring.
please next is Milwaukee tools
@gear_show
Жыл бұрын
I hope I meet milwaukee product next time.
@nelchan2421
Жыл бұрын
@@gear_showand ryobi too
Корявый ремонт. Поршень весь в задирах, его необходимо не наждачной бумагой царапать, а менять на новый.
Can I have this machine please?
To niesamowite że ludziom chce się naprawiać stare graty zamiast kupić nowy. Co prawda ten nowy sprzęt popsuje się szybciej niż stary ale przynajmniej jakaś azjatycka korporacja sobie zarobi 😂
ông ng VN hả
덴지쿤...왜 머리만 오셨소
Trabalho lindo parabéns 👏👏👏👏👍👍🇧🇷🇧🇷
@gear_show
Жыл бұрын
Muito obrigado!
Ваши видео сродни медитации.
👍😎🍺🍩🛠️🗜️
Motosierra de poda nafta caro y aceite caro $$$$$$$$ carisimo gasolina pirata a falta de batería y cargador en paraguay
Sir very late video
@gear_show
Жыл бұрын
Yes, because I spent time to find spare parts.
@fxcracker381
Жыл бұрын
@@gear_show Nice sir you are very close to my heart I am also getting education in this field
Родила царица в ночь, не то сына, не то дочь...
@gear_show
Жыл бұрын
ты очень разговорчивый
Sorry du chasch kei vergaser istelle men jung
Vjxhfef
👎👎👎
First pin me
@gear_show
Жыл бұрын
You're lucky.
@lanunhlimaraltekawlni5678
Жыл бұрын
Thank you🥰🥰🥳🥳
Nn o tempo di giocare a pallina 🥎
Такой себе ремонт...🤦 Стоило вообще её полностью разбирать, если собирать на старом говне...!?🙊🤦
CHEERS✨!! Boost your stats = 'Promosm' .