Пікірлер

• 
  @IlkaH-y9q5 күн бұрын

  Good evening from Germany! Many thanks for your videos. I was able to replace the new dfi-sensor, the pinches and the globe liner! Everything works! 👍

• 
  @Catevolution14 күн бұрын

  A purrleasure! The Litter-Robot 3 is an awesome appliance and self repairable for great longevity! Just wonderful!

• 
  @mistyrious1111starseed8 күн бұрын

  This isn't a deep clean. A deep clean would be taking out the liner and cleaning under it.. no one does it and mine smells

• 
  @Catevolution18 күн бұрын

  Quite an old video but whisker does not show deep cleaning as globe liner removal required. If your liner is smelly, removal of the black bolt underside of entry lip allows access to underside of the liner if needed. Use Whisker spray cleaner with enzymes to spritz the liner after wash and dry. Light spray, leave on to dry. The enzymes chase down lingering odours. The fence accessory also keeps the entry lip in place to stop soiled material getting under the liner too.😻

• 
  @champagne4All10 күн бұрын

  Thank you, just did it. the video made it faster

• 
  @Catevolution110 күн бұрын

  A purrleasure to assist!

• 
  @user-bn8mj9no6f14 күн бұрын

  I purposely looked for this in July! I needed the hysteria!

• 
  @Catevolution114 күн бұрын

  a purrleasure

• 
  @ericarose197917 күн бұрын

  The fact that this had 17,000 veiws is not a good sign. I loved it at first. Now look where we are.

• 
  @Catevolution116 күн бұрын

  with over 1,000,000 sold, its actually a great sign, plus the Litter-Robot 3 is self repairable so you get longevity after warranty - big bonus now when most appliances are throw away and buy another one!

• 
  @BoomBoom-xn7ud18 күн бұрын

  Were do I stick the piece of foam that's included with the liner?

• 
  @Catevolution118 күн бұрын

  where the original one was, usually located left side mid way around 😻

• 
  @shanthegamer2128 күн бұрын

  “Life Comes At You Fast. Invest with Nationwide. Investments, Retirement, Insurance” -Nationwide Mutual Insurance, unrelated but I thought a nostalgic reference could be expected for this situation.

• 
  @pasqualemignano277Ай бұрын

  Office Xmas party 🥰🥰🥰🥰🥰

• 
  @schoolsgirlАй бұрын

  As others have stated, you are a life saver and much better video than Litter Robot's. I was hesitating on getting a new liner and now I am confident I can do this on my own. They should pay you a commission :)

• 
  @Catevolution1Ай бұрын

  Thank you! We are Australia and NZ authorized distributors of the amazing Litter-Robot by whisker

• 
  @ellenclark7137Ай бұрын

  This did not correct my issue. My cats don’t understand their box is not working. Help!!

• 
  @Catevolution1Ай бұрын

  colour of light and flash rate are needed purrlease

• 
  @michelereg1590Ай бұрын

  I couldn't have done it without his instructions. Thank you so much.

• 
  @Catevolution1Ай бұрын

  A purrleasure to assist!

• 
  @nickyniku72802 ай бұрын

  you are amazing!

• 
  @Catevolution12 ай бұрын

  A purrleasure to assist. Nathan did a great job shooting for Cat Evolution ❤

• 
  @trapevelys13913 ай бұрын

  Pan the camera out when you do these.

• 
  @Catevolution13 ай бұрын

  Thank you!

• 
  @trapevelys13913 ай бұрын

  @@Catevolution1 just coming from therapy and I am understanding I say stuff well intentioned but not nicely worded. I loved your video, it was most helpful to me and my cat. I realize you can’t please everyone on the internet but I also feel many people might better enjoy and feel assisted by your videos. Keep up the stellar work!🫡

• 
  @Catevolution13 ай бұрын

  @@trapevelys1391 purrfectly ok, taken as intended 😻feedback is always welcome to try and make the experience better!

• 
  @SuperIrishDiva3 ай бұрын

  Thank you for this amazing video! You showed so much detail, and that made all the difference in the world. Trying to figure out how to install the DFI would have been a nightmare without this video. Charlotte, Dutchess, Bittle and Tigger thank you a million times over for saving the day!😊

• 
  @Catevolution13 ай бұрын

  A purrleasure! Nathan did a wonderful job shooting the video and it helps to see more detail when installing. Its not that its too hard, but it needs to be done step by step and takes a little while. Well done on your installation and you can now be confident on self installing if needed for good longevity, as the DFI is the longer of repairs due to accessing both motorwell and base. Well done YOU!!

• 
  @missysjas4 ай бұрын

  Great video. It didn’t solve my problem sadly

• 
  @Catevolution14 ай бұрын

  If the problem persists, its best to replace the DFI and pinch detectors. Review here kzread.info/dash/bejne/eZ1no8Z7c6zTpdI.html (new version of DFI now available, installation is very similar).

• 
  @Plain_Simple_N4 ай бұрын

  Hi there, I was wondering if you can help me out in finding a replacement globe liner. I can't seem to find them anywhere, any ideas?

• 
  @Catevolution14 ай бұрын

  If you are in Australia, please email [email protected] and I can update. Register to be notified as we are sold out but will be restocking asap, end of April anticipated. We can provide assistance for temp repair until we restock if you email.

• 
  @ms.ashley5 ай бұрын

  First, the instructions on any video related to this are off because the wires and even the plastics pieces shown are not what’s in the newer versions of the LR3. So that took time figuring out. They need to update the videos. Second, I went through all of this to have the same issue; nothing has changed. At this point, I am highly dissatisfied with this product I’ve had less than 8 months.

• 
  @Catevolution15 ай бұрын

  Thank you for your feedback. I suggest you contact where you purchased the Litter-Robot as this video was created in Australia in 2021, with the process for the DFI version 1 similar but not the same for the revised (new version ) of DFI v2. Whisker.com is the manufacturer and can assist you further if you are not able to contact the company you purchased from (it appears you are USA based). If nothing has changed following installing the new DFI successfully, and you still have a flashing blue light, check you installed the DFI mainboard plug the correct way up. There is channel and groove to assist that need to be checked when installing. WE trust this assists.

• 
  @ms.ashley5 ай бұрын

  @@Catevolution1 yes I called them and they are sending a new base, free under warranty

• 
  @Catevolution15 ай бұрын

  Good to hear. Whisker is a great company who fully support their products@@ms.ashley

• 
  @sandrinegypteau9725 ай бұрын

  merci beaucoup votre vidéo m'a sauvé la vie c'est tellement facile grâce a vous

• 
  @Catevolution15 ай бұрын

  A purrleasure to assist!

• 
  @agentkkerryhoagland48015 ай бұрын

  I have a pet cat. I have a question the litter robot is it battery operated? Or do I have to plug it in at all

• 
  @Catevolution15 ай бұрын

  mains power required. You can add a battery backup but not for full time operation.

• 
  @agentkkerryhoagland48015 ай бұрын

  @@Catevolution1 thank you for getting back to me I don’t have the little robot. I do have a regular cat box and I take care of her every time she uses it. I was just curious. So I would have to plug it in thank you very much for your information

• 
  @Catevolution15 ай бұрын

  @@agentkkerryhoagland4801 a purrleasure!

• 
  @lukegagorik24745 ай бұрын

  Is there an issue with cleaning it with a wet wipe? Also while on? I'm afraid I might have fried it..

• 
  @Catevolution15 ай бұрын

  the green board can be cleaned with moist qtip but needs to be unplugged (no power). wiping the clear cover with a baby wipe should not be an issue unless you wet the green board with the unit plugged in.

• 
  @bab5panky5 ай бұрын

  Thanks for the clear instructions and pictures. It's all very well telling people to clean the sensors but if you aren't sure where they are or what they look like, it's no help at all. Your explanation is the best I have found. I've subscribed.

• 
  @Catevolution15 ай бұрын

  You're welcome! Glad it helped with your issue 😻

• 
  @landshark12116 ай бұрын

  This video is a lifesaver. We tried everything to get the DFI sensor working, and this finally did the trick!

• 
  @Catevolution16 ай бұрын

  great to hear it's helpful!

• 
  @hateterrorists2 ай бұрын

  real pity that it even came to that. I've found this litter robot to be the cheapest, most poorly engineered thing I've ever wasted $800 AUD on. Mother of god what a piece of garbage. It was less fuss to just scoop litter then by this thing that faults out every day with some new nonsense.

• 
  @Marshacrt6 ай бұрын

  I cannot stand the lip on the litter box!!! I cannot keep it threaded… once I get it the cats undo it by scratching it… do you have any ideas??? I tried glue but that didn’t work either!!! Help

• 
  @Catevolution16 ай бұрын

  the fence accessory is designed to pin down and protect the entry lip if your cats scratch or kick it off.kzread.info/dash/bejne/dHWqw8WraauZoZc.html kzread.info/dash/bejne/dHWqw8WraauZoZc.html

• 
  @naesanhurley6 ай бұрын

  Awesome video.

• 
  @Catevolution16 ай бұрын

  Thank you, glad it's helpful!

• 
  @dailydistruction6 ай бұрын

  Cleaning of these sensors saved my litter robot. Flashing blue light error started after 3yrs. They were very dirty, cleaned drum roller area too.

• 
  @Catevolution16 ай бұрын

  Great to hear. Litters have varied in quantity since Covid supply disruptions and at times are dustier or not clumping as well. Always have a quick look at the waste drawer for how well the litter, and your kitties output, is going, when changing a full liner 😻

• 
  @ryanchan23586 ай бұрын

  1:05/1:06 tree falls

• 
  @user-tc9cl5cn3g7 ай бұрын

  Mine doesn’t go back to the home setting 🤷🏻‍♀️🤔

• 
  @Catevolution17 ай бұрын

  Do you mean it does not go back to solid blue light, or does it finish without returning the globe to the home or waiting position? Do you have 3 flashing lights? If you have unscrewed the globe, you may have lost the globe magnets. If you are not using the original power supply, you may not have enough power (15volt). Feel free to provide more information as there is not enough on the initial comment.

• 
  @chicloso7k7 ай бұрын

  Wow, that was a great commercial. 😸

• 
  @shawnmichael81907 ай бұрын

  Thank you! You made replacing my DFI sensors for the 1st time not so difficult. My 2 Sphynx cats told me to thank you as well. I found out this a very common issue with these sensors going bad.

• 
  @Catevolution17 ай бұрын

  Great to hear you have self installed, with the Litter-Robot 3 designed to DIY providing good longevity. The DFI Has been redesigned so the green boards are fully encased to provide durability with varied quality litters, as Whisker.com are excellent in continuing to make improvements if reasonable, even with a new version released. Its a big uptick for the LR3 ;o)

• 
  @user-kl4rq6ch6q7 ай бұрын

  What a great commercial 😂and true too! Shake that package, 😊and they can't come fast enough.❤

• 
  @Catevolution17 ай бұрын

  An oldie now but a goodie! Wishing you well for the festive season!

• 
  @Eleos867 ай бұрын

  Cats ❤

• 
  @Raycheetah7 ай бұрын

  This tells me almost *nothing* about the product. ='[.]'=

• 
  @Catevolution17 ай бұрын

  Thank you and it was done as a bit of influencer fun. You can check out the actual product on the website. For Australia its www.catevolution.com.au. The manufacturer is whisker.com ;o)

• 
  @Raycheetah7 ай бұрын

  @@Catevolution1 Thanks. I'll take a look. =^[.]^=

• 
  @natefitz778 ай бұрын

  Yesterday I changed my router setup, and had a difficult time reconnecting the whisker app, but I did get it to work. Here's the details: - went in the app and deleted the device (somewhat desperate after failing to update the wifi in the app) - made sure wifi was 2.4GHz (turned off dual 2.4/5G wifi for the duration of this procedure) - my wifi SSID & password don't have exotic characters - TURNED OFF CELL DATA ON MY PHONE (the wifi connection got past the place it previously froze) - Followed the procedure above, press 2-buttons to get blue light, add litter robot 3, scan the QR code, bluetooth almost immediately errored, choose wifi pairing, connected to the litter robot wifi with password 'neverscoop' - back to the app, hit next, got the prompt to choose my wifi network and password in seconds (this step hung for >15 minutes several times before I tried turning off cell data) - selected my 2.4GHz SSID & entered the password - hit next - TOGGLED ON CELL DATA - brought the app back up, within 1 minute it was successfully added (it had hung up here for >5 minutes before trying to turn on cell data) Maybe some of this is was luck and small sample size. I also tried various steps that seemed to have no effect, including app re-install, switching devices (Apple & Android), power cycling the device (when the procedure above worked, it had been 10+ hours since I pulled the cord, waited 15 seconds - or some other random/long time, plugged back in, etc.). I really think the cell data toggling was part of the magic for me, but here are some things I tried near the time it finally worked: Waited overnight (perhaps notable since the device was deleted from the account and then re-added), reset the router (my router setup is a bit DIY, and the wifi access point is separate, it doesn't get happier with reboots like consumer units I've had in the past). It's not very scientific, but I was still hung up at certain points in the app connection routine until the cell service off / on toggling at specific points.

• 
  @vickylopez81978 ай бұрын

  Thank you 🙏🏽 so much for this tutorial ! it was step by step and really easy to follow

• 
  @Catevolution18 ай бұрын

  Great to hear! Nathan does a wonderful job, and its a purrleasure to help keep your Litter-Robot 3 in good working order ;o)

• 
  @gracielasantana9 ай бұрын

  I ♥️♥️ it…!!🐾🥰👍🏻😻

• 
  @jaegee16679 ай бұрын

  Thank you:) hopefully mine stays working:)🙏🏼👏🏼

• 
  @Catevolution19 ай бұрын

  A purrleasure !

• 
  @eboneesmith68279 ай бұрын

  Thanks for @garretthecarrot

• 
  @disneydweeks17159 ай бұрын

  Do you have a direct link for the liner? The link you have is not working for me

• 
  @Catevolution19 ай бұрын

  To purchase or to see how to install? If purchase, we are Australia and New Zealand distributors, and the liners are available on our websites for those countries (catevolution.com.au and catevolution.co.nz). If you are elsewhere, visit whisker.com the USA manufacturer for your distributor.

• 
  @disneydweeks17159 ай бұрын

  @@Catevolution1 thank you so much🙏🏼💯

• 
  @Catevolution19 ай бұрын

  A purrleasure! Note the fence can also be a good accessory to keep your globe liner in good order, if you have scratchers and heavy footed cats that pull of the lip area. Check it on the distributors website when you get your liner organised.

• 
  @logang10619 ай бұрын

  Still says 95%full

• 
  @Catevolution19 ай бұрын

  Likely you need to clean the DFI specifically, or possibly replace if damaged. See if this helps For the left DFI, the silver chip pins located left side of the midboard black square (chip) may have damage, likely from litter dust or drop. Try cleaning these, stroking along the pins outwards from the black square, with an earbud or qtip lightly damp or if you have contact cleaner, using that. Make sure you are unplugged completely by removing the power supply from the back of the base first. Essentially, you are working to separate the pins by removing all debris from between, and on them. As its litter related, moisture to soften first is needed. You can also use a wood toothpick or similar to help clean between the pins if needed. When done, ideally returning the pins to silver like the right side set, wipe over again with the dry end to ensure you have removed all debris. The pinch detectors may have dirt/debris where they touch together. Push on the cover (DO NOT PULL) to open a small gap and wipe the touch point area with a qtip or earbud. Its tight but thats good as you need a clean surface for good power flow. Please take another set of pictures of these 2 parts, and send, and update with outcome of test after cleaning. Note that sign of a good litter is solid clumping, low dust, and you can review this in both globe (not sticking) and waste drawer (solid clumps). Litters seem to have changed formula a little this year, likely from Covid supply issues, and you are best to review and if needed, change litter, to keep your appliance in good order. It also helps reduce odour by locking up the uric acid or cat pee smells.

• 
  @RenateJr8 ай бұрын

  Might need to repace it for the version 2.. we had the same problem..95% all the time..even after reset it told us it was full (but almost nothing was in it) ..Put the bag as far down as possible, deep cleaned it, cleaned the dfi sensor thorougly, even tried recalibrating the sensor .. but after checking with a phone the lasers just didnt work anymore, a common problem (we learned) with the version 1. Buying the v2 fixed the problem for us.

• 
  @Catevolution18 ай бұрын

  Version 2 is now supplied, but the instalation is similar@@RenateJr

• 
  @kortniewithak588510 ай бұрын

  Thank you for this video! Helped A lot! My liner came with a new screw and nut installed in the liner to use... I didn't realize that until after I had it all together 😂 Had to take the liner off the front to remove it to use it 😅 The liner seemed to be too big when I was installing in along the rim. I found it helpful to have the front all installed, then kept essentially massaging the liner front to back along both sides until it all finally appeared to be well into the groove without bunching. I also found it helpful to start with screwing it back together starting from the very back and working forward. Initially I started up front... but the back end wound up popped out a bit... much easier to pop the front into place with the back held in properly than the back when when the front is held in place.

• 
  @kortniewithak588510 ай бұрын

  My goodness what's going on with my typing on my phone? 😅

• 
  @Catevolution110 ай бұрын

  All good and glad it was helpful!

• 
  @KiLLAHiLLEST4 ай бұрын

  This comment helped me more than the video 😂🙌🏽🫶🏽 jk jk lolol 😏

• 
  @shayybey10 ай бұрын

  Where can i buy another globe liner? I cant find it on the website 🤦‍♀️

• 
  @Catevolution110 ай бұрын

  It’s under accessories for www.catevolution.com.au if you are in Australia 🇦🇺 or try whisker.com for overseas or USA.

• 
  @Catevolution110 ай бұрын

  Sorry, components catevolution.com.au/products/lr3-globe-liner-html

• 
  @noellepetach936810 ай бұрын

  Finally a video that showed, explained, and solved my problem for me! Thank you!

• 
  @Catevolution110 ай бұрын

  Thank you! Nathan does a wonderful job!

• 
  @noahmeme210 ай бұрын

  I'm having trouble with it. Mine seems to be too long. I put it on tight and it's not laying flat.

• 
  @Catevolution110 ай бұрын

  The globe liner usually has waves or folds in it. When fitting, start at the rear middle and work forward, not stretching anything. When you have about half done, move to the front left and right and fit the pockets over the shell casing, so that you know you have it pretty much lined up. The folds are in the bottom 2/3 not in the actual fitting at the top in the channel.

• 
  @kiki8590011 ай бұрын

  I cleaned it and made sure my bag was right but it still is flashing blue slowly and says it's full..

• 
  @Catevolution111 ай бұрын

  Review your DFI (green board) and pinch detectors for dirt and/or corrosion. This video is for installing replacement parts. You can clean your sensors, with helpful comment by @joegatnah1498 8 months ago Thank you for the great advice. The chip on the board on the pinch sensor side looked discolored on the left side of its pins that solder into the board. I had literally done everything else that I had found on their website but nothing worked. Then I found your video. After watching, I cleaned the board as recommended , waited for it to dry, and the reassembled. Success! Thanks again.

• 
  @kodyharris467011 ай бұрын

  I just want to encourage anyone, I have a litter 3 and it had flashing blue and then flashing yellow if I pressed reset. I took off the bonnet, the ball, the litter drawer, removed the screws from bottom, slip apart bottom to access the drawer sensors and pinch sensor. Removed the right and left drawer sensor boards, cleaned clear lenses, green board, and pinch metal contact with alcohol very well, replaced clear lenses in reverse, reassembled and the issue is fixed!

• 
  @Catevolution111 ай бұрын

  Awesome to hear Kody, and yes, cleaning can be really restorative, particularly if there is material on the silver rows of chip pins next to the black square on the left side green board. Ensuring debris is removed from on and between the pins can get the issue resolved. You can also swap over position of the pinch detectors for a new head and tip contact to help with extending use.

• 
  @christopherjackson360911 ай бұрын

  Is it possible that the sensors themselves, not the plastic covering, is the issue? If so, is there a reliable way to clean them? I cleaned the covering for the sensors and even removed the liner from the drawer, but I am still getting the dreaded blinking blue light

• 
  @Catevolution111 ай бұрын

  Yes. The green boards have a thin resin coating. The area to check is the silver chip pins or rows of small bars located on the left side board (not the control panel side). Review for any discolouration, dust or deposit on the pins. Clean by softening up with a damp qtip, and stroking along to remove debris front on the pins, and between them, so they are separated. A toothpick can also help.

• 
  @9caide11 ай бұрын

  Better than the whiskers video ive just done this but it wont power on now . Great video though

• 
  @Catevolution111 ай бұрын

  Thank you, purrleased to hear the video is helpful. For no power, check you have the plugs plugged in still in the motorwell, sometimes they can come loose when refitting the cover. You can also test if you open the motorwell, if you add the bonnet to complete the circuit. It can be helpful to unplug each plug to see if you can isolate the sensor that maybe the issue. Also check your power supply is correct. If needed you can send photos to [email protected] and I can take a look. DFI, pinch, motorwell, underside are all good photos for review if needed.

• 
  @anabeltre431611 ай бұрын

  Oh no what very naughty cats 😂😂😂😂😂😂😂😂😂😂😂😂😂😂😂😂😂😂😂😂😂😂😂😂😂😂😂😂😂😂😂😂😂😂😂😂😂😂😂😂hahahahahahahahahahahahahaha so funny

• 
  @jadziaschillzone Жыл бұрын

  This video is way better than the brand account video Ty ❤

• 
  @Catevolution1 Жыл бұрын

  Thank you!

• 
  @edwardvelez9031 Жыл бұрын

  When I removed my liner 2 small magnet came out. I don't know where it belongs. Any help would be appreciated.

• 
  @Catevolution1 Жыл бұрын

  check here community.robotshop.com/blog/show/litter-robot-iii-open-air-the-secret-behind-the-globe