Every time I watch one of your videos it costs me money ! lol never heard of that router bit before now. Excellent video Spenc!
@keokeoihaia3067 сағат бұрын
amazing
@brianmccafferty147011 сағат бұрын
Wow 29 doors
@DR-um2bvКүн бұрын
Does it have to have drywall behind it for interior ceiling use,? mineral wool insulation also
@masonpaluchniak8015Күн бұрын
I will try this method on the next beams I do but I have one question. Wouldn’t plumbing your ends to get those angles against the drywall only work if your board is level? Thanks Spencer
@jamesmorris1888Күн бұрын
Question couldn’t you just set a bevel to the angle of the walls instead of using the pipe gauge and level?
@brucecomerfordКүн бұрын
Fabulous video. Thanks mate!
@AlfredoAntunez-oo1frКүн бұрын
Man in real life you shut 3 nails and that’s it
@elidcastan4816Күн бұрын
He is annoying like people on TV shows .
@jonhilyer78942 күн бұрын
I've been watching your channel and I'm really impressed. It appears this device works best when you have a little more room to operate. So if you could get the framers to build a perfect opening how much additional space would you add?
@chriscolameco68502 күн бұрын
Have you tried using one of those 3" ""cutoff tool"s Thumb on the shoe gives me more control than the barrel grip jig saw
@jeffweber82442 күн бұрын
Great tips. Would like to know the story how the cans got misplaced.
@NoraS-K2 күн бұрын
What type of wood is that? It's gorgeous.
@estevanvaldez24692 күн бұрын
I did my first professional stair job and I wanted to thank you for helping me make a living with the knowledge you shared
@lukestickney91162 күн бұрын
Where can i source that baseboard from? Can you provide the manufacturer info?
@benhorton17082 күн бұрын
I’m a 4th generation carpenter but no longer work with my tools. I enjoy your videos tremendously. In the commercial world there is zero precision. I am in no way a painter, you couldn’t pay me enough, but I bet those guys love you. It would be even better if you carried at least the trim painting in your number. You probably save them so much labor with your precision I bet they make good money following you.
@authorjackgarrett2 күн бұрын
I needed this video! You summed up everything without any fluff. Thank you and nice work.
@travisgilley37182 күн бұрын
A knee replacement/surgery will cost more than these. Get them before it’s too late
@joelethalcruz44173 күн бұрын
Better than cuthub 4000 dollars
@Matt-qg2nk3 күн бұрын
Could you show how you make the rabbet cuts on the newel posts? I made a post today like yours but I had to use a hand saw and coping saw to get nice cuts. My table saw fence is not the best and I had issues trying to use it to rabbet.
@WilliamOverthrow3 күн бұрын
Is it just circular saw up to the door no guide rail?
@bdm10003 күн бұрын
Great video (I've watched it three times over the last year or two), but I have a question: Preface: You said that you use the Festool ETS EC 150/5 random orbital sander 99% of the time, and you also said you use 120 grit sandpaper 99.9% of the time on both this sander and your Rotex (which you use on the hardest woods like white oak). My question is-for a non-professional whose workflow is less demanding (though still demanding enough)-might it still make sense to forgo the Rotex and instead go down to a 60 and/or 80 grit sandpaper for hardwoods using the ETS EC 150/5, and then finish up with the 120 grit sandpaper? I've never sanded white oak with anything. Thanks for sharing and keep up the great work.
@raulc3983 күн бұрын
Hi Spencer,do you always place the jambmaster on the barrel hinge side?
@jamesclark42703 күн бұрын
You could probably use the rafter hook off the framing nailer
@donproctor34453 күн бұрын
Obviously, it doesn't make a difference but what about the taper of the trim left to RT. In theory, you raise the trim up in the air at the point of the blade. So you have a slight uphill left Rt and tilt front to back?
@albundy62843 күн бұрын
Do you ever use 15ga nails for casing?
@darkdelta4 күн бұрын
Saw this video earlier and followed your lead on the 5/32 Round Over bit, and I'm really glad I did. Thanks for letting us look over your shoulder
@davidkrumrieii89884 күн бұрын
Thanks
@marcoortega52954 күн бұрын
Definitely great trade secret. I’m thinking of doing this to my 16ga. Would it be as effective?
@staceyismine5 күн бұрын
Thats good but how would you do it to open the door outwards so the slats don't hit and stop the door from opening
@louisgaccione77945 күн бұрын
Thank you.. Great video, I've learned something hear today from you ...A material list and sizes would be great to know. Also do you have a video of building this on a staircase wall w/ a raised panel insert. Thank you. Lou
@gustavoteixeirabjj15265 күн бұрын
Im having a hard time finding that inside bead molding. Does anyone have any info on it?
@caseysmith54785 күн бұрын
I enjoyed your video. I have been contemplating doing a very similar detail with the mortises at floor rail. My balusters are 1" solid stock turned on a diamond rather than square to the floor rail. My railing is 25lb. railroad. Which will the balusters will be welded to the bottom of the rail. I would like your take on this plan. Thanks Casey
@Gallo9035 күн бұрын
Thank You for sharing your knowledge and experience!!! Priceless…. Blessings to you!!!
@tomwiggins12256 күн бұрын
What is the wing setup you have with your miter saw
@ManuelVCano6 күн бұрын
Very informative. Thank you for the content sir.
@domf-ez4ml6 күн бұрын
Such great tips! Re mortising treads: I found it very difficult to line up the ½" mortiser chisel perfectly on the ½" hole. I switched to a 7/16 forstner bit which enabled me to look down through the top of the mortise chisel and align it perfectly centered. I then cleaned up the mortise with a "pig sticker" mortise chisel. I also bought the mortiser chisel through your link and it needed quite a lot of honing (of the flat sides) to get it sharp, once I did that it was a lot easier to mortise my oak treads. Thanks again for all your great videos!
@martintaylor9846 күн бұрын
Dewalt is for the serious DIYer and Milwaukee is for professional tradesman. Personally I use dewalt and home and Milwaukee on the job. I install water utilities so I am rough on stuff with water mud ice etc. and Milwaukee always gets the job done. But at home where I’m not working g as hard dewalt does me just fine
@plankedwoodworking10986 күн бұрын
What's the preferred blocking location for 6-8 doors? I do behind bottom hinge, below middle and then above and below top hinge. Preference?
@bobhunt2496 күн бұрын
Just watched this and never knew it, but found out the hard way about center pivot point changing when using an auxiliary fence.
@TheBenjammin6 күн бұрын
I remodeled my bathroom and used shiplap around the new tub surround instead of drywall. Saved me a bunch if time and looks great
@keithdygert11206 күн бұрын
What’s the specific hardware you used from Lowe’s to make the drawer latches and what did you use to cut it down? I’m looking at doing the same type of thing on my new van build out that was significantly inspired by your video! Thank you.
@mxdadNZ7 күн бұрын
I learn more from this channel than any other. I can’t believe I get these tips for free.
@TuanBui-yp7oz7 күн бұрын
So is there something in the shelf itself that the rod goes into? Or it just goes in with the PL in general area.? Thx for all the vids!! Love em all and learn a ton!
@michaelhoch45357 күн бұрын
This is so helpful to me. I’m having this exact problem. What do you do if the jamb is proud at the top and not the bottom of the window frame?
@marciafirst22717 күн бұрын
This was an incredibly thorough lesson on how to build beautiful beams. I watched it because I want to add beams to my basement family room. Your attention to detail is amazing, and your step-by-step instructions, make me feel like I can do this. Beautiful work, and an excellent lesson! Thanks for the inspiration!❤
@customcreations80377 күн бұрын
I put brad nails because the contractor I work for is to cheap. You get what you pay for, remember that contractors 🥱🥴
@ormonde967 күн бұрын
Hi Spencer,you’re a top,top carpenter and I have learned a lot ,and that’s just the way you explain things.much appreciated 👍
Пікірлер
Every time I watch one of your videos it costs me money ! lol never heard of that router bit before now. Excellent video Spenc!
amazing
Wow 29 doors
Does it have to have drywall behind it for interior ceiling use,? mineral wool insulation also
I will try this method on the next beams I do but I have one question. Wouldn’t plumbing your ends to get those angles against the drywall only work if your board is level? Thanks Spencer
Question couldn’t you just set a bevel to the angle of the walls instead of using the pipe gauge and level?
Fabulous video. Thanks mate!
Man in real life you shut 3 nails and that’s it
He is annoying like people on TV shows .
I've been watching your channel and I'm really impressed. It appears this device works best when you have a little more room to operate. So if you could get the framers to build a perfect opening how much additional space would you add?
Have you tried using one of those 3" ""cutoff tool"s Thumb on the shoe gives me more control than the barrel grip jig saw
Great tips. Would like to know the story how the cans got misplaced.
What type of wood is that? It's gorgeous.
I did my first professional stair job and I wanted to thank you for helping me make a living with the knowledge you shared
Where can i source that baseboard from? Can you provide the manufacturer info?
I’m a 4th generation carpenter but no longer work with my tools. I enjoy your videos tremendously. In the commercial world there is zero precision. I am in no way a painter, you couldn’t pay me enough, but I bet those guys love you. It would be even better if you carried at least the trim painting in your number. You probably save them so much labor with your precision I bet they make good money following you.
I needed this video! You summed up everything without any fluff. Thank you and nice work.
A knee replacement/surgery will cost more than these. Get them before it’s too late
Better than cuthub 4000 dollars
Could you show how you make the rabbet cuts on the newel posts? I made a post today like yours but I had to use a hand saw and coping saw to get nice cuts. My table saw fence is not the best and I had issues trying to use it to rabbet.
Is it just circular saw up to the door no guide rail?
Great video (I've watched it three times over the last year or two), but I have a question: Preface: You said that you use the Festool ETS EC 150/5 random orbital sander 99% of the time, and you also said you use 120 grit sandpaper 99.9% of the time on both this sander and your Rotex (which you use on the hardest woods like white oak). My question is-for a non-professional whose workflow is less demanding (though still demanding enough)-might it still make sense to forgo the Rotex and instead go down to a 60 and/or 80 grit sandpaper for hardwoods using the ETS EC 150/5, and then finish up with the 120 grit sandpaper? I've never sanded white oak with anything. Thanks for sharing and keep up the great work.
Hi Spencer,do you always place the jambmaster on the barrel hinge side?
You could probably use the rafter hook off the framing nailer
Obviously, it doesn't make a difference but what about the taper of the trim left to RT. In theory, you raise the trim up in the air at the point of the blade. So you have a slight uphill left Rt and tilt front to back?
Do you ever use 15ga nails for casing?
Saw this video earlier and followed your lead on the 5/32 Round Over bit, and I'm really glad I did. Thanks for letting us look over your shoulder
Thanks
Definitely great trade secret. I’m thinking of doing this to my 16ga. Would it be as effective?
Thats good but how would you do it to open the door outwards so the slats don't hit and stop the door from opening
Thank you.. Great video, I've learned something hear today from you ...A material list and sizes would be great to know. Also do you have a video of building this on a staircase wall w/ a raised panel insert. Thank you. Lou
Im having a hard time finding that inside bead molding. Does anyone have any info on it?
I enjoyed your video. I have been contemplating doing a very similar detail with the mortises at floor rail. My balusters are 1" solid stock turned on a diamond rather than square to the floor rail. My railing is 25lb. railroad. Which will the balusters will be welded to the bottom of the rail. I would like your take on this plan. Thanks Casey
Thank You for sharing your knowledge and experience!!! Priceless…. Blessings to you!!!
What is the wing setup you have with your miter saw
Very informative. Thank you for the content sir.
Such great tips! Re mortising treads: I found it very difficult to line up the ½" mortiser chisel perfectly on the ½" hole. I switched to a 7/16 forstner bit which enabled me to look down through the top of the mortise chisel and align it perfectly centered. I then cleaned up the mortise with a "pig sticker" mortise chisel. I also bought the mortiser chisel through your link and it needed quite a lot of honing (of the flat sides) to get it sharp, once I did that it was a lot easier to mortise my oak treads. Thanks again for all your great videos!
Dewalt is for the serious DIYer and Milwaukee is for professional tradesman. Personally I use dewalt and home and Milwaukee on the job. I install water utilities so I am rough on stuff with water mud ice etc. and Milwaukee always gets the job done. But at home where I’m not working g as hard dewalt does me just fine
What's the preferred blocking location for 6-8 doors? I do behind bottom hinge, below middle and then above and below top hinge. Preference?
Just watched this and never knew it, but found out the hard way about center pivot point changing when using an auxiliary fence.
I remodeled my bathroom and used shiplap around the new tub surround instead of drywall. Saved me a bunch if time and looks great
What’s the specific hardware you used from Lowe’s to make the drawer latches and what did you use to cut it down? I’m looking at doing the same type of thing on my new van build out that was significantly inspired by your video! Thank you.
I learn more from this channel than any other. I can’t believe I get these tips for free.
So is there something in the shelf itself that the rod goes into? Or it just goes in with the PL in general area.? Thx for all the vids!! Love em all and learn a ton!
This is so helpful to me. I’m having this exact problem. What do you do if the jamb is proud at the top and not the bottom of the window frame?
This was an incredibly thorough lesson on how to build beautiful beams. I watched it because I want to add beams to my basement family room. Your attention to detail is amazing, and your step-by-step instructions, make me feel like I can do this. Beautiful work, and an excellent lesson! Thanks for the inspiration!❤
I put brad nails because the contractor I work for is to cheap. You get what you pay for, remember that contractors 🥱🥴
Hi Spencer,you’re a top,top carpenter and I have learned a lot ,and that’s just the way you explain things.much appreciated 👍
Really enjoy your videos! Very talented.
I love this. "A strong 32nd of an inch."