i didnt fin any information about my question, maybe you can ! Is it possible to do that on a 330 facelift or completley not ? because i see nobody doing that on something else than an M3 e46 !
@colerobinson11877 күн бұрын
what made you think it was evap?
@Ocurrey13209 күн бұрын
Man I take my hat off to you for this job.. Question... For just an expansion valve replacement, is the dash still required to be removed like this?
@maxextz9 күн бұрын
Stupid video
@covak200211 күн бұрын
have you heard were you guys got the side Airbags from 9:05 you say you got the MK5 side airbags from a mk4 which didnt have them come on guys your better than that also the seam sealer WTF do it neatly and that isnt how its applied
@cosolote12 күн бұрын
Please, next time you put them side to side to compare the shape of the pedals!!! great video
@KierranHoffman13 күн бұрын
Absolutely, never hesitated once to use ACL
@marknoir14 күн бұрын
Hi. Thx for the video. I have quite a few of your vids saved into my “E46 M3 repair” playlist. Question: you mention that there’s another purge valve near the gas tank under the large cover. I tried to find it on RealOEM, but only found a leak detection pump there. ? Thx.
@user-lw6sp1dp8k14 күн бұрын
BMW E39는 정말 명차중에 명차~!!
@D8XID16 күн бұрын
is this possible with a non m chasis (04 325ci), seriously considering the swap this is the only question holding me back
@Snappy65017 күн бұрын
I’m dead serious about an e46 s85 wagon. Maybe even in Laguna Seca
@troyr347818 күн бұрын
Any squeaks or rattles from the dash or console after everything was put back together? MY 540 will be gutted soon to perform the same evaporator repair, and I'm nervous it wont be the same afterwards.
@SAAFU-lx5qg20 күн бұрын
Where did you buy the complete rear subframe or did you just remanufacture it?
@joshuamontelongo89920 күн бұрын
Love my M5t as well bro. Have fun!
@faizelphilander693824 күн бұрын
I still like this interior to me it was the best.
@TheNookie81325 күн бұрын
Let the thing warm up Atleast before you go revving it and ripping on it smh
@dagger174926 күн бұрын
6:15 Did you turn the exhaust gear on the passenger side to get the bolts to line up? I’m doing this job right now and passenger side cams aren’t lining up. Found out I can turn the exhaust gear to get them to line up
@YEVSBUILDS24 күн бұрын
I'm not fully understanding what you're trying to say here
26 күн бұрын
Taking off the shroud is stupid
@YEVSBUILDS24 күн бұрын
I know, I put it back on after this video haha
@WhateverItTakesLIVE27 күн бұрын
NOW YOU DON'T HAVE AN M5 NICE
@YEVSBUILDS24 күн бұрын
I'm not complaining. I'll have an M5 touring baby!!
@adi40429 күн бұрын
what is going to happen to the chasis of m5 sedan?¿
@YEVSBUILDS28 күн бұрын
I'll sell it, don't ese a reason of keeping it. Wanna buy?
@adi40428 күн бұрын
@@YEVSBUILDS neah, but someone else will
@alexlloyd9201Ай бұрын
Why no anti-seize for spark plugs?
@YEVSBUILDS28 күн бұрын
Some spark plugs don't require anti-seize, usually says it on the box
@rayrom8219Ай бұрын
It’s impossible to prove you wrong.
@ronejr766Ай бұрын
Mine has been sitting collecting dust. I gotta get her back in shape.
@YEVSBUILDS28 күн бұрын
DO IT!!!!
@ronejr76628 күн бұрын
@@YEVSBUILDS wanna come and help? lol. Jk. Thing that scares me most.. replacing rod bearings. Just preventative.. but it’ll be my biggest challenge doing all my own work on it. I’ve got a timing chain cover leak so new guides coming while it’s apart fixing that.
@YEVSBUILDS24 күн бұрын
@@ronejr766 Bro rod bearings are way less scary than timing chains haha
@xboxmaster8658Ай бұрын
Brother I want you to do this for me so badly... v 10 in a 2012 335, m3 Trans would be awesome. You got a price in mind ?
@YEVSBUILDS28 күн бұрын
Haha let's chat once mine is done
@chrisward7038Ай бұрын
I remember cursing that plastic 17mm bolt. Laid on my back, in the street, in winter 🥶 Did that job and the thermostat change on the same weekend 🥴
@lukerichard8747Ай бұрын
Thanks for the video was really helpful, got the part from BMW and fixed it easily.
@mio-robloxgodАй бұрын
I have 2 of them now. One for the wife (525i) and one for me (540i). We love these cars including our son 🤙🏽
@jonathangruiz127Ай бұрын
Mine just went bad would like to send them to get rebuilt
@alexz7245Ай бұрын
Bed cars BMW
@ThedavidsavageАй бұрын
Are you the douche leaving burnout marks everywhere?
@YEVSBUILDSАй бұрын
HAH! No way dude! I would never
@albania2664Ай бұрын
When you have to much money 🔥🔥🔥😂😂😂
@YEVSBUILDSАй бұрын
Bro you have no idea how broke I am hahaha
@thesilentscreamsАй бұрын
Direct Drive Pedals...only drummers will understand.
@YEVSBUILDSАй бұрын
That thought crossed my mind so many times - would be so sweet (I'm a drummer for over 15 years now, I do understand haha Type in Eugene Novik on KZread, you'll see my covers)
@joshuamaharaj8140Ай бұрын
can you share the process docs for the timing chain guide service, looking to do mine soon on my m5
@YEVSBUILDSАй бұрын
I made a whole step by step series on this job, just look through my channel, you'll find em
@joshuamaharaj8140Ай бұрын
@@YEVSBUILDS saw the video but was looking more for the torque specs. You referenced the TIS in the video but I wasn’t able to find it when I searched. Was hoping to get some insight before I paid for it again
@YEVSBUILDSАй бұрын
@@joshuamaharaj8140 torque specs for what exactly?
@joshuamaharaj814028 күн бұрын
@@YEVSBUILDS you mentioned a bolting pattern on the vanos so I was looking for documentation on the process and if there was any specifics for reassembly
@madhunter6420Ай бұрын
How much did this project cost you so far? did u buy a total m3 or just an e46 and modded it?
@YEVSBUILDSАй бұрын
Oh boy, too much bro. It's a financial money pit but it'll all be worth it. I bought a clean title M3 that was parted out before I got my hands on pretty much the shell (not eve a rolling shell). Check out my instagram @yevsbuilds and you'll see the photos of the car when I got it. All I'll tell you is that I'm well over 40k into this build so far...
@MRM5JАй бұрын
Why? Was something wrong? I've not heard of this before.
@YEVSBUILDSАй бұрын
These ones in particular had a lot of wear on the plastic gears. That's a very common failure point on these engines.
@McCarthyism_by_YoutubeАй бұрын
wack content annoying music ignores questions averaging 1 view every 2 days unsubscribed
@AAJandfamАй бұрын
I think that everyday I see mine
@ItsPainnzАй бұрын
they got kings bearing for supercharged 5sfe lmao
@BenFennerАй бұрын
Engine is out and you're doing bearings. Why in the world did you not do the main bearings as well?
@ItsPainnzАй бұрын
right
@YEVSBUILDSАй бұрын
I'll tell you exactly why: because I'm not loaded with cash and this is a little side project. Main project car is a V10 M3. The S62 I pulled out of my M5 for this wagon swap, I know is very solid since I've had it for several years already. If I do the main bearings, I won't have a choice but to do a refresh on the whole motor and that'll be spendy. The plan with this is to supercharge it down the line after the V10 M3 is complete - that's when I'll do everything on this engine. For now, this thing has zero leaks, and runs perfectly fine. I promised myself I wouldn't get carried away with this project and I wont. Not yet at least. I wanna drive it by the end of summer so those are the reasons. Makes sense?
@propergarage4249Ай бұрын
No need for it man this sure race engine where they are a problem
@propergarage4249Ай бұрын
Yes sir 🔥
@YEVSBUILDSАй бұрын
Yeah baby!!!
@YEVSBUILDSАй бұрын
Make sure to like / share / subscribe! You know the drill
@carrier7676Ай бұрын
Another great build video! P.S. Whats the link to buy the bearings and the bolts?
@YEVSBUILDSАй бұрын
@@carrier7676 Appreciate you. I'll put Guys' email in the description for anyone else interested. If you order directly from him, make sure to mention me and let him know who sent you!!
@Snappy650Ай бұрын
Legend ❤❤
@jamalljohnson2487Ай бұрын
Jesus Christ. I think I’m about to do this now 🥲
@YEVSBUILDSАй бұрын
Good luck captain!
@jakefarm4694Ай бұрын
Was just looking at buying both actuators brand new until I saw this. This is doable ! Appreciate the video !
@YEVSBUILDSАй бұрын
Happy to help!!
@jadenhittle7988Ай бұрын
How’s this clutch flywheel set up feel 4yrs later?
@YEVSBUILDSАй бұрын
It's amazing! Love everything about it besides the chatter noise haha
@Cepera540Ай бұрын
BMW's literally start leaking oil at birth :) That nervous feeling mixed with excitement is 2nd to none. Had that when I rebuild my S62. Great video! congrats!
@YEVSBUILDSАй бұрын
Hahaha they do don't they?🤣Yes and all the worry goes away right at the moment one realizes the engine runs great!! Appreciate you bro!
@ahmedabusalem3568Ай бұрын
I have been following your work for years on the car, creative and genius
@YEVSBUILDSАй бұрын
Appreciate you so much for sticking around!!! Thank you
Пікірлер
Thats in such bad condition😢
Love the build bro
Valve didn’t fix mine
i didnt fin any information about my question, maybe you can ! Is it possible to do that on a 330 facelift or completley not ? because i see nobody doing that on something else than an M3 e46 !
what made you think it was evap?
Man I take my hat off to you for this job.. Question... For just an expansion valve replacement, is the dash still required to be removed like this?
Stupid video
have you heard were you guys got the side Airbags from 9:05 you say you got the MK5 side airbags from a mk4 which didnt have them come on guys your better than that also the seam sealer WTF do it neatly and that isnt how its applied
Please, next time you put them side to side to compare the shape of the pedals!!! great video
Absolutely, never hesitated once to use ACL
Hi. Thx for the video. I have quite a few of your vids saved into my “E46 M3 repair” playlist. Question: you mention that there’s another purge valve near the gas tank under the large cover. I tried to find it on RealOEM, but only found a leak detection pump there. ? Thx.
BMW E39는 정말 명차중에 명차~!!
is this possible with a non m chasis (04 325ci), seriously considering the swap this is the only question holding me back
I’m dead serious about an e46 s85 wagon. Maybe even in Laguna Seca
Any squeaks or rattles from the dash or console after everything was put back together? MY 540 will be gutted soon to perform the same evaporator repair, and I'm nervous it wont be the same afterwards.
Where did you buy the complete rear subframe or did you just remanufacture it?
Love my M5t as well bro. Have fun!
I still like this interior to me it was the best.
Let the thing warm up Atleast before you go revving it and ripping on it smh
6:15 Did you turn the exhaust gear on the passenger side to get the bolts to line up? I’m doing this job right now and passenger side cams aren’t lining up. Found out I can turn the exhaust gear to get them to line up
I'm not fully understanding what you're trying to say here
Taking off the shroud is stupid
I know, I put it back on after this video haha
NOW YOU DON'T HAVE AN M5 NICE
I'm not complaining. I'll have an M5 touring baby!!
what is going to happen to the chasis of m5 sedan?¿
I'll sell it, don't ese a reason of keeping it. Wanna buy?
@@YEVSBUILDS neah, but someone else will
Why no anti-seize for spark plugs?
Some spark plugs don't require anti-seize, usually says it on the box
It’s impossible to prove you wrong.
Mine has been sitting collecting dust. I gotta get her back in shape.
DO IT!!!!
@@YEVSBUILDS wanna come and help? lol. Jk. Thing that scares me most.. replacing rod bearings. Just preventative.. but it’ll be my biggest challenge doing all my own work on it. I’ve got a timing chain cover leak so new guides coming while it’s apart fixing that.
@@ronejr766 Bro rod bearings are way less scary than timing chains haha
Brother I want you to do this for me so badly... v 10 in a 2012 335, m3 Trans would be awesome. You got a price in mind ?
Haha let's chat once mine is done
I remember cursing that plastic 17mm bolt. Laid on my back, in the street, in winter 🥶 Did that job and the thermostat change on the same weekend 🥴
Thanks for the video was really helpful, got the part from BMW and fixed it easily.
I have 2 of them now. One for the wife (525i) and one for me (540i). We love these cars including our son 🤙🏽
Mine just went bad would like to send them to get rebuilt
Bed cars BMW
Are you the douche leaving burnout marks everywhere?
HAH! No way dude! I would never
When you have to much money 🔥🔥🔥😂😂😂
Bro you have no idea how broke I am hahaha
Direct Drive Pedals...only drummers will understand.
That thought crossed my mind so many times - would be so sweet (I'm a drummer for over 15 years now, I do understand haha Type in Eugene Novik on KZread, you'll see my covers)
can you share the process docs for the timing chain guide service, looking to do mine soon on my m5
I made a whole step by step series on this job, just look through my channel, you'll find em
@@YEVSBUILDS saw the video but was looking more for the torque specs. You referenced the TIS in the video but I wasn’t able to find it when I searched. Was hoping to get some insight before I paid for it again
@@joshuamaharaj8140 torque specs for what exactly?
@@YEVSBUILDS you mentioned a bolting pattern on the vanos so I was looking for documentation on the process and if there was any specifics for reassembly
How much did this project cost you so far? did u buy a total m3 or just an e46 and modded it?
Oh boy, too much bro. It's a financial money pit but it'll all be worth it. I bought a clean title M3 that was parted out before I got my hands on pretty much the shell (not eve a rolling shell). Check out my instagram @yevsbuilds and you'll see the photos of the car when I got it. All I'll tell you is that I'm well over 40k into this build so far...
Why? Was something wrong? I've not heard of this before.
These ones in particular had a lot of wear on the plastic gears. That's a very common failure point on these engines.
wack content annoying music ignores questions averaging 1 view every 2 days unsubscribed
I think that everyday I see mine
they got kings bearing for supercharged 5sfe lmao
Engine is out and you're doing bearings. Why in the world did you not do the main bearings as well?
right
I'll tell you exactly why: because I'm not loaded with cash and this is a little side project. Main project car is a V10 M3. The S62 I pulled out of my M5 for this wagon swap, I know is very solid since I've had it for several years already. If I do the main bearings, I won't have a choice but to do a refresh on the whole motor and that'll be spendy. The plan with this is to supercharge it down the line after the V10 M3 is complete - that's when I'll do everything on this engine. For now, this thing has zero leaks, and runs perfectly fine. I promised myself I wouldn't get carried away with this project and I wont. Not yet at least. I wanna drive it by the end of summer so those are the reasons. Makes sense?
No need for it man this sure race engine where they are a problem
Yes sir 🔥
Yeah baby!!!
Make sure to like / share / subscribe! You know the drill
Another great build video! P.S. Whats the link to buy the bearings and the bolts?
@@carrier7676 Appreciate you. I'll put Guys' email in the description for anyone else interested. If you order directly from him, make sure to mention me and let him know who sent you!!
Legend ❤❤
Jesus Christ. I think I’m about to do this now 🥲
Good luck captain!
Was just looking at buying both actuators brand new until I saw this. This is doable ! Appreciate the video !
Happy to help!!
How’s this clutch flywheel set up feel 4yrs later?
It's amazing! Love everything about it besides the chatter noise haha
BMW's literally start leaking oil at birth :) That nervous feeling mixed with excitement is 2nd to none. Had that when I rebuild my S62. Great video! congrats!
Hahaha they do don't they?🤣Yes and all the worry goes away right at the moment one realizes the engine runs great!! Appreciate you bro!
I have been following your work for years on the car, creative and genius
Appreciate you so much for sticking around!!! Thank you