My own flights, plus a few bits i haven't seen elsewhere that might interest others. Business contact [email protected] - feel free to email me if you have any questions.
plz can you give me the osd + regulator for kiss v2? plz plz plz! I still fly analog
@1337plansАй бұрын
Yes Ross! I am going to subscribe to your channel! Thank you for the information! Do you want to be KZread friends? haha =)
@sergioleandroschnorr24492 ай бұрын
can you share the wiring diagram with other digital video systems such as HDZero and Walksnail? and how to set up with these systems?
@maddercat2 ай бұрын
Really interesting. I've been playing around with trying to hack the runcam pro a bit myself. I found that the original one uses a wider lens mount than the wide. The original one has the smaller view, is that the one you're modding then? Which lens would you suggest to get a wider view and make it more like the -w?
@YoungGhillie2 ай бұрын
hey where is this bando i want to go to it? Cheers
@YawataNokamiGaming4 ай бұрын
I need help my fox25 is wobbling
@ForrestJWilson5 ай бұрын
I have a tinyhawk 3 rtf kit. I calibrated the accelerometer, but it will randomly reset itself leaning forward about 15 degrees causing difficulty keeping stable. Then sometimes it will go back to it original settings. Its like it disconnecting from somthing then reconnecting? It's also yawing like a clock, ticking by 10 degrees right until it completes a full rotations. It also sounds like it gets random inputs to 1 prop every 10 to 20 seconds. Tested props in beta flight, they were all fine. All plugs and connections are fine. Any advice?
@YawataNokamiGaming5 ай бұрын
Smooth like butter 🧈🚀🥹.. Can i copy this pid tunes to foxwhoop25 with foxeer reaper aio with datura motor ?
@ethrrr9 ай бұрын
Hello, great flight :)) Very smooth! Is it going to be responsive with 2004 2600KV motors, 1100 or 1000 mah 6s and gopro 8(battery included) ...I am thinking about building my first cinewhoop, and I'm worried that it would fly like a brick :D
@sunnydeshmukh22179 ай бұрын
Is this in acro?
@NoName-dn8nv10 ай бұрын
Good frame excellent hardware perhaps slightly overpriced by20 or 30 bucks
@Chillin-fpv10 ай бұрын
So i dont think the rapidfire module is going through my goggles. So do i still have to be on the same channel with the googles themselves? When i switch channels and band with the module nothing happens. I still have video. It's like I'm flying without antennas on my goggles. Do i need to do something in the menu to get them to run through the module. I have it plugged into the av in. Its like its not working
@andymattock39711 ай бұрын
Beautiful... Ballsy... Great music... Wot's not to like 🫶
@MichaelRogersJesusrules Жыл бұрын
Thank you for sharing, i have nearly finished building mine, used a speedybee f7 stackmini 35a the aio didnt fit same but aio, with hdzero wss 1s mini..same motors, as my 1st build ,noot recomendingg for beginners lol.. still fun to gett frustrated at 50 odd hehe..cheers n tnks again 4 sharing!
@dasoltab.d9257 Жыл бұрын
I lost a few weeks ago and haven't seen your video yet. Can I see the last GPS coordinates of the drone that crashed some time ago with the data in Tango 2 if I set it like in this video? hopefully you can help me, thanks
@CoppertopFPV Жыл бұрын
No. Need to do this first before you lose it
@madladdan Жыл бұрын
This or the gopro session 5?
@gabrielemoro1 Жыл бұрын
Now that runcam thumb has the wider version i think this mod make no sense anymore. Right?
@pbavoni Жыл бұрын
Hi Ross, I'm Peter from Germany, I also bought a Foxeer Foxwhoop 35 last December. That's why I came across your channel and saw the first flight video of you, but I'm still miles away from flying like you and your music selection in the videos is terrific. Check out my youtube channel "peter bavoni" and have fun too. Question: Do you fly in acro or angle mode when you fly through the forest? Maybe you can give me your flight rates to help. We keep in touch, My dad thought I could fly too.... lol. He passed away too. See you soon Cheers Peter
@GenCodeFPV Жыл бұрын
Is there anything you need to do to set home point or will it auto set once you start flying? How will we know we acquired say at least 8 satellites? Love to see a video with more details on what each RTH/GPS menu option means like you did the punch out part of RTH
@softart5235 Жыл бұрын
price check .... something is wrong.
@jasflyfpv9655 Жыл бұрын
Hi, nice build and review. Also, nice rip even for a small cinewhoop. I'm thinking to swap my cinelog 25 for this frame. Can u post ur 3d print file for the camera tpu mount and antenna mount. It would be much help. Thanks.
@aylenstudios Жыл бұрын
is it possible to change the t pro to be stick mode 3? If it is possible, how hard is it
@falconfpv9467 Жыл бұрын
Great review but a bit damming in parts. As already mentioned you can get the top plate with the countersunk screws. Not sure if this was a really early design but I’ve had mine about a year and there’s no nut under the rear GoPro mount. I built the frame with the parts Chris Rosser suggested and it’s definitely the best frame I’ve flown by far. You can definitely push the tune further than other frames and obtain an incredible feel. I think a basic tune and slightly wrong motor/prop set up will give what you have. A quad that flies the same as any other.
@CoppertopFPV Жыл бұрын
Early frame. He's amended it multiple times and took on the points I mentioned and a lot of others. I think part of why I was harsh is because frankly there is so much nonsense going on with these frames and the reality is they're fine but imo nothing special. If you go back to my apex frame review you'll find similar views although in fairness build issues aside that frame later grew on me and proved to be a sturdy well designed frame which goes to show these 'reviews' are just one person's view based on experience and yours may well be different
@BlueHairPronouns Жыл бұрын
Testament*
@IDriveAnAudi Жыл бұрын
I have one being delivered today. I really like flying heavier quads for the flight dynamics.
@ashd1930 Жыл бұрын
I thought the idea with TPU mounts was to have a fair bit of flexibility to filter out the high frequency vibrations that are harder for software to deal with. Yours looks rock solid - may as well be ABS! I don't have the Thumb Pro yet but am looking to order very soon. Thanks for your video!
@sticky_ricebowl Жыл бұрын
came for the camera test. Stayed for the adventure time feels
@markstevensfpv3722 Жыл бұрын
Looks great bud!
@Dav2112 Жыл бұрын
Nice flight mate, I haven't flown in ages neither, going to make a point of getting back into it this year, too much crap going on in my life atm. This is the style of flights I enjoy the most these days, got fed up with the floppy flops, I find it way more relaxing flying a quad around like this.
@CoppertopFPV Жыл бұрын
Yeah was nice to float around in some sunshine. Different sort of skill but very relaxing. Get back at it :)
@Dav2112 Жыл бұрын
@@CoppertopFPV I will be mate, I think I flew maybe 7 times in total last year, have got a lot going on and still do, but I know getting out and flying some packs will help me pull my head out of my arse and stop dwelling on the past!
@blackterminal Жыл бұрын
What's it like with inav?
@jeffclassics Жыл бұрын
Can I have a copy of your cli? I messed up mine so bad when I transitioned to 4.3. I fly it with 850mah approx 100g. Thanks
@keithc1562 Жыл бұрын
thank you very much for sharing your PID tune, it works for BNF of cinelog25 and migrated to this frame
@The-Bogey-Man Жыл бұрын
Cannot bind this thing to my TX16S to save my life. Tried the CLI bind_rx first, didn’t work. Drone is flashed to latest 4.3 firmware. Radio is running version 2.7.1. Please help, I’m a newb!
@Nostrologyy Жыл бұрын
Funny I've seen countless clips with the ThumbPro and don't seem to see any jello or notable issues with their footage.
@InertiaFPV Жыл бұрын
Nice mate. I just built my Foxwhoop 25 with the same mamba aio and motors but I went for the 1404 4600kv instead. I flashed Bluejay and ran both the 96k and 48k PWM frequency and I noticed at 96k it runs a way smoother. Definately worth flashing so you can turn on bidirection Dshot on in Betaflight mate. You sound like northerner lad? I'm based in Cheshire, where abouts are you from?
@CoppertopFPV Жыл бұрын
Originally blackburn but live in Norfolk :)
@Bmeadowz Жыл бұрын
I'm using the same motors & same fc finding it shakes like crazy on half throttle & above? Have either of you guys experienced this?🙃
@InertiaFPV Жыл бұрын
@@Bmeadowz I have mate. This FC runs blheli_s so I flashed it with Bluejay with PWN frequency of 96k and it's way smoother. The lower frequency of 48k had a lot more vibrations.
@InertiaFPV Жыл бұрын
@@CoppertopFPV I forgot to ask mate... what flight times are you getting? I'm running the 650mah 4s batteries and I like to fly fairly fast and rip it around my property. I'm only getting about 3 minutes but that's because I'm getting a lot of battery sag. I'm brining it in when it reaches 14V but then it can bounce back up to nearly 15V. Are you also getting a lot of battery sag? If so are you running it down lower than 14V because you know it will jump back up? Thanks.
@CoppertopFPV Жыл бұрын
@InertiaFPV haven't flown in ages. If I remember I got around that with the action cam on. Tend to go hard on little batteries so fly till 14v then do some closer stuff to 13.7 or so. Foxwhoop 35 frame just arrived so will be playing with that Soon
@AirviewDroneScotland Жыл бұрын
I need one!
@Derickandlannyfpv Жыл бұрын
nice sir does rippith
@thewhitedillard Жыл бұрын
Shame it's not a Stretched X or at very least True X, though I'd change a lot for this design overall. Nice design.
@thewhitedillard Жыл бұрын
vitally zero capacitors on that board 💥
@droneincolombiainternational Жыл бұрын
Wow very good video my friend that hero 7 camera is very good have a great day and a very big greeting from Colombia 😀
@flipfpv Жыл бұрын
Foxeer just dropped a 3.5" version of this frame! I never got around to building the 2.5" but I'm definitely getting the 3.5". Should make a great winter project now that it's getting crappy outside.
@CoppertopFPV Жыл бұрын
Yeah I'm waiting for uk stock of the frame. Looks great:)
@HaveFaithInGod Жыл бұрын
For less than $100 bucks you got a half empty glass of camera...mine was half full for the same price ! Cheer up buddy!
@rMidnight Жыл бұрын
3 years have passed, and my question is: Which battery survived better?
@CoppertopFPV Жыл бұрын
Cnhl black series have been good too me and are my preferred battery
@rMidnight Жыл бұрын
@@CoppertopFPV Thank you so much for answering me! I just bought 6 cnhl black batteries even before your reply. Thank you very much!
@sethnorton8332 Жыл бұрын
Nice build and I love those motors
@achristofides Жыл бұрын
Had similar issues with the camera with small vibrations I think mainly due to the lightness of it making footage unusable. Got much better footage from my Caddx peanut on same quad (cinelog 25) although this does seem a bit sharper for raw footage. Might try making a heavier mount to see if that helps.
@ApappieK Жыл бұрын
I suggest to use Gyroflow 1.2 and Runcam ThumbPro firmware 1.2.4, together with the new Runcam Android app. Jellow standard setting and std lens. They improved missing frames and jellow a lot. I noticed quite a big difference in your sync times (around 9min50sec). Try to delete the -22ms and -55 ms and add manual syncpoints on places where you see a lot of vibrations. Since I used the new software and good brand V3 SD card (can write 75MB/s), I got more consistent sync times (only a few ms difference, if difference is larger than 10ms, I delete that point and look for a better place to sync), less jellow and nearly no missing frames.
@Shauny_D Жыл бұрын
I've been used the caddx ratel lens it's wider like the gopro but it's a lot sharper
@popperkidpaps656 Жыл бұрын
Do not buy this drone I repeat do not buy this drone I've already had to spend $300 in repairs and that's not an exaggeration. The frame is strong I will give them that but absolutely nothing else on the drone is built properly There aren't even screws holding the vista in place so so one little crash and your vista might fall out and rip the wire. The camera broke on my 1st crash because there's absolutely no protectionIn the camera sticks out about 2" from the drone therefore any head on crash will break your camera As well, The wires inside the drone phone ripped causing the controller the controller to lose function and and the video to vanish. When I emailed the company they responded with an email accusing me of lying lol . They said their is no way it was a minor crash because the drone in indestructible. If you are going to call a drone unbreakable you'd here belive people are going to crash it yet they accused me of lying. I could not believe it but I should have known , Foxeer had and has no business making drones and they should go back to making antennas or whatever else they make
@dabfpv Жыл бұрын
RTF purchased directly from the manufacturer in October. It came with the newest FC in version V3 (ICM gyro) but the settings were for the previous version with a different gyro! Bad tunnig caused extremely hot engines. A novice pilot could burn the engines. After reset pids and filters, im use preset UAV tech for cinewhoops, wich works great. The Reaper VTX died on its second flight for no apparent reason. One of the bolts on the bottom plate was damaged during factory assembly, it was difficult to unscrew. It is a pity that the set did not include spare screws, as do for example Diatone or IFilight. After replacing the VTX, I was happy to fly, but after a slight impact, I noticed damaged cables from the motor, which were incorrectly fitted at the factory. After all, it is a great quad that I liked very much.
@mode2fpv Жыл бұрын
i have the same issue with jello and different tpu mounts ( classic gopro 2 pieces plus some others i made ) with my 5" quads , i am gonna try a solid one piece mount that i made today ...im very disappointed atm !
Пікірлер
plz can you give me the osd + regulator for kiss v2? plz plz plz! I still fly analog
Yes Ross! I am going to subscribe to your channel! Thank you for the information! Do you want to be KZread friends? haha =)
can you share the wiring diagram with other digital video systems such as HDZero and Walksnail? and how to set up with these systems?
Really interesting. I've been playing around with trying to hack the runcam pro a bit myself. I found that the original one uses a wider lens mount than the wide. The original one has the smaller view, is that the one you're modding then? Which lens would you suggest to get a wider view and make it more like the -w?
hey where is this bando i want to go to it? Cheers
I need help my fox25 is wobbling
I have a tinyhawk 3 rtf kit. I calibrated the accelerometer, but it will randomly reset itself leaning forward about 15 degrees causing difficulty keeping stable. Then sometimes it will go back to it original settings. Its like it disconnecting from somthing then reconnecting? It's also yawing like a clock, ticking by 10 degrees right until it completes a full rotations. It also sounds like it gets random inputs to 1 prop every 10 to 20 seconds. Tested props in beta flight, they were all fine. All plugs and connections are fine. Any advice?
Smooth like butter 🧈🚀🥹.. Can i copy this pid tunes to foxwhoop25 with foxeer reaper aio with datura motor ?
Hello, great flight :)) Very smooth! Is it going to be responsive with 2004 2600KV motors, 1100 or 1000 mah 6s and gopro 8(battery included) ...I am thinking about building my first cinewhoop, and I'm worried that it would fly like a brick :D
Is this in acro?
Good frame excellent hardware perhaps slightly overpriced by20 or 30 bucks
So i dont think the rapidfire module is going through my goggles. So do i still have to be on the same channel with the googles themselves? When i switch channels and band with the module nothing happens. I still have video. It's like I'm flying without antennas on my goggles. Do i need to do something in the menu to get them to run through the module. I have it plugged into the av in. Its like its not working
Beautiful... Ballsy... Great music... Wot's not to like 🫶
Thank you for sharing, i have nearly finished building mine, used a speedybee f7 stackmini 35a the aio didnt fit same but aio, with hdzero wss 1s mini..same motors, as my 1st build ,noot recomendingg for beginners lol.. still fun to gett frustrated at 50 odd hehe..cheers n tnks again 4 sharing!
I lost a few weeks ago and haven't seen your video yet. Can I see the last GPS coordinates of the drone that crashed some time ago with the data in Tango 2 if I set it like in this video? hopefully you can help me, thanks
No. Need to do this first before you lose it
This or the gopro session 5?
Now that runcam thumb has the wider version i think this mod make no sense anymore. Right?
Hi Ross, I'm Peter from Germany, I also bought a Foxeer Foxwhoop 35 last December. That's why I came across your channel and saw the first flight video of you, but I'm still miles away from flying like you and your music selection in the videos is terrific. Check out my youtube channel "peter bavoni" and have fun too. Question: Do you fly in acro or angle mode when you fly through the forest? Maybe you can give me your flight rates to help. We keep in touch, My dad thought I could fly too.... lol. He passed away too. See you soon Cheers Peter
Is there anything you need to do to set home point or will it auto set once you start flying? How will we know we acquired say at least 8 satellites? Love to see a video with more details on what each RTH/GPS menu option means like you did the punch out part of RTH
price check .... something is wrong.
Hi, nice build and review. Also, nice rip even for a small cinewhoop. I'm thinking to swap my cinelog 25 for this frame. Can u post ur 3d print file for the camera tpu mount and antenna mount. It would be much help. Thanks.
is it possible to change the t pro to be stick mode 3? If it is possible, how hard is it
Great review but a bit damming in parts. As already mentioned you can get the top plate with the countersunk screws. Not sure if this was a really early design but I’ve had mine about a year and there’s no nut under the rear GoPro mount. I built the frame with the parts Chris Rosser suggested and it’s definitely the best frame I’ve flown by far. You can definitely push the tune further than other frames and obtain an incredible feel. I think a basic tune and slightly wrong motor/prop set up will give what you have. A quad that flies the same as any other.
Early frame. He's amended it multiple times and took on the points I mentioned and a lot of others. I think part of why I was harsh is because frankly there is so much nonsense going on with these frames and the reality is they're fine but imo nothing special. If you go back to my apex frame review you'll find similar views although in fairness build issues aside that frame later grew on me and proved to be a sturdy well designed frame which goes to show these 'reviews' are just one person's view based on experience and yours may well be different
Testament*
I have one being delivered today. I really like flying heavier quads for the flight dynamics.
I thought the idea with TPU mounts was to have a fair bit of flexibility to filter out the high frequency vibrations that are harder for software to deal with. Yours looks rock solid - may as well be ABS! I don't have the Thumb Pro yet but am looking to order very soon. Thanks for your video!
came for the camera test. Stayed for the adventure time feels
Looks great bud!
Nice flight mate, I haven't flown in ages neither, going to make a point of getting back into it this year, too much crap going on in my life atm. This is the style of flights I enjoy the most these days, got fed up with the floppy flops, I find it way more relaxing flying a quad around like this.
Yeah was nice to float around in some sunshine. Different sort of skill but very relaxing. Get back at it :)
@@CoppertopFPV I will be mate, I think I flew maybe 7 times in total last year, have got a lot going on and still do, but I know getting out and flying some packs will help me pull my head out of my arse and stop dwelling on the past!
What's it like with inav?
Can I have a copy of your cli? I messed up mine so bad when I transitioned to 4.3. I fly it with 850mah approx 100g. Thanks
thank you very much for sharing your PID tune, it works for BNF of cinelog25 and migrated to this frame
Cannot bind this thing to my TX16S to save my life. Tried the CLI bind_rx first, didn’t work. Drone is flashed to latest 4.3 firmware. Radio is running version 2.7.1. Please help, I’m a newb!
Funny I've seen countless clips with the ThumbPro and don't seem to see any jello or notable issues with their footage.
Nice mate. I just built my Foxwhoop 25 with the same mamba aio and motors but I went for the 1404 4600kv instead. I flashed Bluejay and ran both the 96k and 48k PWM frequency and I noticed at 96k it runs a way smoother. Definately worth flashing so you can turn on bidirection Dshot on in Betaflight mate. You sound like northerner lad? I'm based in Cheshire, where abouts are you from?
Originally blackburn but live in Norfolk :)
I'm using the same motors & same fc finding it shakes like crazy on half throttle & above? Have either of you guys experienced this?🙃
@@Bmeadowz I have mate. This FC runs blheli_s so I flashed it with Bluejay with PWN frequency of 96k and it's way smoother. The lower frequency of 48k had a lot more vibrations.
@@CoppertopFPV I forgot to ask mate... what flight times are you getting? I'm running the 650mah 4s batteries and I like to fly fairly fast and rip it around my property. I'm only getting about 3 minutes but that's because I'm getting a lot of battery sag. I'm brining it in when it reaches 14V but then it can bounce back up to nearly 15V. Are you also getting a lot of battery sag? If so are you running it down lower than 14V because you know it will jump back up? Thanks.
@InertiaFPV haven't flown in ages. If I remember I got around that with the action cam on. Tend to go hard on little batteries so fly till 14v then do some closer stuff to 13.7 or so. Foxwhoop 35 frame just arrived so will be playing with that Soon
I need one!
nice sir does rippith
Shame it's not a Stretched X or at very least True X, though I'd change a lot for this design overall. Nice design.
vitally zero capacitors on that board 💥
Wow very good video my friend that hero 7 camera is very good have a great day and a very big greeting from Colombia 😀
Foxeer just dropped a 3.5" version of this frame! I never got around to building the 2.5" but I'm definitely getting the 3.5". Should make a great winter project now that it's getting crappy outside.
Yeah I'm waiting for uk stock of the frame. Looks great:)
For less than $100 bucks you got a half empty glass of camera...mine was half full for the same price ! Cheer up buddy!
3 years have passed, and my question is: Which battery survived better?
Cnhl black series have been good too me and are my preferred battery
@@CoppertopFPV Thank you so much for answering me! I just bought 6 cnhl black batteries even before your reply. Thank you very much!
Nice build and I love those motors
Had similar issues with the camera with small vibrations I think mainly due to the lightness of it making footage unusable. Got much better footage from my Caddx peanut on same quad (cinelog 25) although this does seem a bit sharper for raw footage. Might try making a heavier mount to see if that helps.
I suggest to use Gyroflow 1.2 and Runcam ThumbPro firmware 1.2.4, together with the new Runcam Android app. Jellow standard setting and std lens. They improved missing frames and jellow a lot. I noticed quite a big difference in your sync times (around 9min50sec). Try to delete the -22ms and -55 ms and add manual syncpoints on places where you see a lot of vibrations. Since I used the new software and good brand V3 SD card (can write 75MB/s), I got more consistent sync times (only a few ms difference, if difference is larger than 10ms, I delete that point and look for a better place to sync), less jellow and nearly no missing frames.
I've been used the caddx ratel lens it's wider like the gopro but it's a lot sharper
Do not buy this drone I repeat do not buy this drone I've already had to spend $300 in repairs and that's not an exaggeration. The frame is strong I will give them that but absolutely nothing else on the drone is built properly There aren't even screws holding the vista in place so so one little crash and your vista might fall out and rip the wire. The camera broke on my 1st crash because there's absolutely no protectionIn the camera sticks out about 2" from the drone therefore any head on crash will break your camera As well, The wires inside the drone phone ripped causing the controller the controller to lose function and and the video to vanish. When I emailed the company they responded with an email accusing me of lying lol . They said their is no way it was a minor crash because the drone in indestructible. If you are going to call a drone unbreakable you'd here belive people are going to crash it yet they accused me of lying. I could not believe it but I should have known , Foxeer had and has no business making drones and they should go back to making antennas or whatever else they make
RTF purchased directly from the manufacturer in October. It came with the newest FC in version V3 (ICM gyro) but the settings were for the previous version with a different gyro! Bad tunnig caused extremely hot engines. A novice pilot could burn the engines. After reset pids and filters, im use preset UAV tech for cinewhoops, wich works great. The Reaper VTX died on its second flight for no apparent reason. One of the bolts on the bottom plate was damaged during factory assembly, it was difficult to unscrew. It is a pity that the set did not include spare screws, as do for example Diatone or IFilight. After replacing the VTX, I was happy to fly, but after a slight impact, I noticed damaged cables from the motor, which were incorrectly fitted at the factory. After all, it is a great quad that I liked very much.
i have the same issue with jello and different tpu mounts ( classic gopro 2 pieces plus some others i made ) with my 5" quads , i am gonna try a solid one piece mount that i made today ...im very disappointed atm !
I used the caddx ratel lense 1.66, its quite nice