My build - Foxwhoop 25 frame Mamba F722 35amp MK1 AIO flight controller T Motor 1404 3800kv Caddix vista with nebula pro nano ELRS receiver EP1 Foxeer micro lollipop Dal new cyclone 2.5"
Жүктеу.....
Пікірлер: 60
@ididitfinallythankyou2 жыл бұрын
This is a fantastic flying👍👌! Thank you for sharing.👍
@markstevensfpv37222 жыл бұрын
Great video and flying mate 🔥
@keithc1562 Жыл бұрын
thank you very much for sharing your PID tune, it works for BNF of cinelog25 and migrated to this frame
@MichaelRogersJesusrules Жыл бұрын
Thank you for sharing, i have nearly finished building mine, used a speedybee f7 stackmini 35a the aio didnt fit same but aio, with hdzero wss 1s mini..same motors, as my 1st build ,noot recomendingg for beginners lol.. still fun to gett frustrated at 50 odd hehe..cheers n tnks again 4 sharing!
@flipfpv Жыл бұрын
Foxeer just dropped a 3.5" version of this frame! I never got around to building the 2.5" but I'm definitely getting the 3.5". Should make a great winter project now that it's getting crappy outside.
@CoppertopFPV
Жыл бұрын
Yeah I'm waiting for uk stock of the frame. Looks great:)
@AirviewDroneScotland Жыл бұрын
I need one!
@YawataNokamiGaming5 ай бұрын
Smooth like butter 🧈🚀🥹.. Can i copy this pid tunes to foxwhoop25 with foxeer reaper aio with datura motor ?
@jasflyfpv9655 Жыл бұрын
Hi, nice build and review. Also, nice rip even for a small cinewhoop. I'm thinking to swap my cinelog 25 for this frame. Can u post ur 3d print file for the camera tpu mount and antenna mount. It would be much help. Thanks.
@sonnivega67392 жыл бұрын
Nice flying. Great review. Also question. Where do you mount a 20x20 stack ?
@CoppertopFPV
2 жыл бұрын
There are 20x20 holes on bottom plate
@sonnivega6739
2 жыл бұрын
@@CoppertopFPV what's I thought. But wasn't sure. Seems to be able to fit a whoop board also
@kuyapeng92102 жыл бұрын
Very nice video👏🏻👏🏻👏🏻 sir do you have a video of how you built it?
@CoppertopFPV
2 жыл бұрын
No build video for this sorry :)
@peternguyen37322 жыл бұрын
Nice vid! I've got an old Taycan 25 I want to strip and put on this frame. However it has mamba 1404 -5000kv motors, do you think it would work well on this frame ? Many thanks
@CoppertopFPV
2 жыл бұрын
Yeah be fine. Can always cap throttle
@flipfpv2 жыл бұрын
Looks like a winner to me! I've got the parts laying around for this build so it would be irresponsible of me not to order the frame 😁
@CoppertopFPV
2 жыл бұрын
I agree. Told my Mrs the same 😉
@dronemacha
Жыл бұрын
@@CoppertopFPV we all tell them the same 🤣🤣🤣🤣
@skydiverfpv
Жыл бұрын
@@dronemacha lol 🤣
@neilfpv Жыл бұрын
Great video! I also have a Foxwhoop 25. I removed all the parts from Cinelog25 and transferred it to the Foxwhoop frame. Anyways, I'm looking for a great external camera. Should I get GoPro Bones or Insta360? I want the video to look high quality since I'll be using it for house real estate indoors. Do you recall what camera you used at 14:40?
@CoppertopFPV
Жыл бұрын
I used a stripped hero 8. Gopro quality is miles better than insta so if you want the best quality it's either stripping one or using the bones.
@neilfpv
Жыл бұрын
@@CoppertopFPV Thank you so much for sharing your thoughts about it. I will not think about other brands anymore other than Gopro. Again, thank you so much!
@jeffclassics Жыл бұрын
Can I have a copy of your cli? I messed up mine so bad when I transitioned to 4.3. I fly it with 850mah approx 100g. Thanks
@Likehunter88 Жыл бұрын
Nice fly! What The flight time this drone?
@CoppertopFPV
Жыл бұрын
3-6 mins depending on what your doing
@rororobu1241 Жыл бұрын
What camera was filmed in the beginning of the video? amazing spans, delight
@CoppertopFPV
Жыл бұрын
Naked hero 8
@rororobu1241
Жыл бұрын
@@CoppertopFPV Thnx, what u think about insta360 camera? normal weight for this drone?
@CoppertopFPV
Жыл бұрын
@@rororobu1241 haven't got one. Runcam thumb pro coming out which looks similar for half the price
@CoppertopFPV2 жыл бұрын
Foxeer have said they are changing the cam mount to the same material as the action cam mount.
@markstevensfpv3722
2 жыл бұрын
I’ll hold off for that then! 👍
@CoppertopFPV
2 жыл бұрын
@@markstevensfpv3722 why? You'll design a new one straight away anyhow 🤣
@aerialphotons237
2 жыл бұрын
I just got my Foxwhoop25HD (Apollo cam) in the mail. I can confirm the camera mount is the same material as the GoPro mounts (clear plastic). Nonetheless, why in the world did I just pay $400usd for a drone with NO TUNE!!!!! Wtf hahahaha. By the way, the Apollo cam is complete dog crap😂.
@CoppertopFPV
2 жыл бұрын
@@aerialphotons237 🤣
@InertiaFPV Жыл бұрын
Nice mate. I just built my Foxwhoop 25 with the same mamba aio and motors but I went for the 1404 4600kv instead. I flashed Bluejay and ran both the 96k and 48k PWM frequency and I noticed at 96k it runs a way smoother. Definately worth flashing so you can turn on bidirection Dshot on in Betaflight mate. You sound like northerner lad? I'm based in Cheshire, where abouts are you from?
@CoppertopFPV
Жыл бұрын
Originally blackburn but live in Norfolk :)
@Bmeadowz
Жыл бұрын
I'm using the same motors & same fc finding it shakes like crazy on half throttle & above? Have either of you guys experienced this?🙃
@InertiaFPV
Жыл бұрын
@@Bmeadowz I have mate. This FC runs blheli_s so I flashed it with Bluejay with PWN frequency of 96k and it's way smoother. The lower frequency of 48k had a lot more vibrations.
@InertiaFPV
Жыл бұрын
@@CoppertopFPV I forgot to ask mate... what flight times are you getting? I'm running the 650mah 4s batteries and I like to fly fairly fast and rip it around my property. I'm only getting about 3 minutes but that's because I'm getting a lot of battery sag. I'm brining it in when it reaches 14V but then it can bounce back up to nearly 15V. Are you also getting a lot of battery sag? If so are you running it down lower than 14V because you know it will jump back up? Thanks.
@CoppertopFPV
Жыл бұрын
@InertiaFPV haven't flown in ages. If I remember I got around that with the action cam on. Tend to go hard on little batteries so fly till 14v then do some closer stuff to 13.7 or so. Foxwhoop 35 frame just arrived so will be playing with that Soon
@roystevenson9632 Жыл бұрын
Curious to know how it might perform with a TransTEC beetle drivetrain (1106 4500kv) and 3s.
@CoppertopFPV
Жыл бұрын
The beetle was a similar weight and mine flew well so I'd imagine it's viable.
@pixelcomet2 жыл бұрын
did you fly a full gopro8 on that little thing?
@CoppertopFPV
2 жыл бұрын
Stripped hero 8
@pixelcomet
2 жыл бұрын
@@CoppertopFPV ok thx. then I need a 3.5" rig
@CoppertopFPV
2 жыл бұрын
@@pixelcomet it'll carry a hero but won't be fun. Give it a month or so and I reckon there'll be a bigger one
@fenuaenata Жыл бұрын
Can u share the stl of your camera mount? Please🙏🙏 brilliant idea
@CoppertopFPV
Жыл бұрын
www.thingiverse.com/thing:5454617 if I was building this again I'd probably add the cap holder to the rear antenna mount as this thing got more and more complicated 😅
@fenuaenata
Жыл бұрын
Do it ahahah do the cap holder like this it will get better anyway awsome job thanks i ll print it soon
Пікірлер: 60
This is a fantastic flying👍👌! Thank you for sharing.👍
Great video and flying mate 🔥
thank you very much for sharing your PID tune, it works for BNF of cinelog25 and migrated to this frame
Thank you for sharing, i have nearly finished building mine, used a speedybee f7 stackmini 35a the aio didnt fit same but aio, with hdzero wss 1s mini..same motors, as my 1st build ,noot recomendingg for beginners lol.. still fun to gett frustrated at 50 odd hehe..cheers n tnks again 4 sharing!
Foxeer just dropped a 3.5" version of this frame! I never got around to building the 2.5" but I'm definitely getting the 3.5". Should make a great winter project now that it's getting crappy outside.
@CoppertopFPV
Жыл бұрын
Yeah I'm waiting for uk stock of the frame. Looks great:)
I need one!
Smooth like butter 🧈🚀🥹.. Can i copy this pid tunes to foxwhoop25 with foxeer reaper aio with datura motor ?
Hi, nice build and review. Also, nice rip even for a small cinewhoop. I'm thinking to swap my cinelog 25 for this frame. Can u post ur 3d print file for the camera tpu mount and antenna mount. It would be much help. Thanks.
Nice flying. Great review. Also question. Where do you mount a 20x20 stack ?
@CoppertopFPV
2 жыл бұрын
There are 20x20 holes on bottom plate
@sonnivega6739
2 жыл бұрын
@@CoppertopFPV what's I thought. But wasn't sure. Seems to be able to fit a whoop board also
Very nice video👏🏻👏🏻👏🏻 sir do you have a video of how you built it?
@CoppertopFPV
2 жыл бұрын
No build video for this sorry :)
Nice vid! I've got an old Taycan 25 I want to strip and put on this frame. However it has mamba 1404 -5000kv motors, do you think it would work well on this frame ? Many thanks
@CoppertopFPV
2 жыл бұрын
Yeah be fine. Can always cap throttle
Looks like a winner to me! I've got the parts laying around for this build so it would be irresponsible of me not to order the frame 😁
@CoppertopFPV
2 жыл бұрын
I agree. Told my Mrs the same 😉
@dronemacha
Жыл бұрын
@@CoppertopFPV we all tell them the same 🤣🤣🤣🤣
@skydiverfpv
Жыл бұрын
@@dronemacha lol 🤣
Great video! I also have a Foxwhoop 25. I removed all the parts from Cinelog25 and transferred it to the Foxwhoop frame. Anyways, I'm looking for a great external camera. Should I get GoPro Bones or Insta360? I want the video to look high quality since I'll be using it for house real estate indoors. Do you recall what camera you used at 14:40?
@CoppertopFPV
Жыл бұрын
I used a stripped hero 8. Gopro quality is miles better than insta so if you want the best quality it's either stripping one or using the bones.
@neilfpv
Жыл бұрын
@@CoppertopFPV Thank you so much for sharing your thoughts about it. I will not think about other brands anymore other than Gopro. Again, thank you so much!
Can I have a copy of your cli? I messed up mine so bad when I transitioned to 4.3. I fly it with 850mah approx 100g. Thanks
Nice fly! What The flight time this drone?
@CoppertopFPV
Жыл бұрын
3-6 mins depending on what your doing
What camera was filmed in the beginning of the video? amazing spans, delight
@CoppertopFPV
Жыл бұрын
Naked hero 8
@rororobu1241
Жыл бұрын
@@CoppertopFPV Thnx, what u think about insta360 camera? normal weight for this drone?
@CoppertopFPV
Жыл бұрын
@@rororobu1241 haven't got one. Runcam thumb pro coming out which looks similar for half the price
Foxeer have said they are changing the cam mount to the same material as the action cam mount.
@markstevensfpv3722
2 жыл бұрын
I’ll hold off for that then! 👍
@CoppertopFPV
2 жыл бұрын
@@markstevensfpv3722 why? You'll design a new one straight away anyhow 🤣
@aerialphotons237
2 жыл бұрын
I just got my Foxwhoop25HD (Apollo cam) in the mail. I can confirm the camera mount is the same material as the GoPro mounts (clear plastic). Nonetheless, why in the world did I just pay $400usd for a drone with NO TUNE!!!!! Wtf hahahaha. By the way, the Apollo cam is complete dog crap😂.
@CoppertopFPV
2 жыл бұрын
@@aerialphotons237 🤣
Nice mate. I just built my Foxwhoop 25 with the same mamba aio and motors but I went for the 1404 4600kv instead. I flashed Bluejay and ran both the 96k and 48k PWM frequency and I noticed at 96k it runs a way smoother. Definately worth flashing so you can turn on bidirection Dshot on in Betaflight mate. You sound like northerner lad? I'm based in Cheshire, where abouts are you from?
@CoppertopFPV
Жыл бұрын
Originally blackburn but live in Norfolk :)
@Bmeadowz
Жыл бұрын
I'm using the same motors & same fc finding it shakes like crazy on half throttle & above? Have either of you guys experienced this?🙃
@InertiaFPV
Жыл бұрын
@@Bmeadowz I have mate. This FC runs blheli_s so I flashed it with Bluejay with PWN frequency of 96k and it's way smoother. The lower frequency of 48k had a lot more vibrations.
@InertiaFPV
Жыл бұрын
@@CoppertopFPV I forgot to ask mate... what flight times are you getting? I'm running the 650mah 4s batteries and I like to fly fairly fast and rip it around my property. I'm only getting about 3 minutes but that's because I'm getting a lot of battery sag. I'm brining it in when it reaches 14V but then it can bounce back up to nearly 15V. Are you also getting a lot of battery sag? If so are you running it down lower than 14V because you know it will jump back up? Thanks.
@CoppertopFPV
Жыл бұрын
@InertiaFPV haven't flown in ages. If I remember I got around that with the action cam on. Tend to go hard on little batteries so fly till 14v then do some closer stuff to 13.7 or so. Foxwhoop 35 frame just arrived so will be playing with that Soon
Curious to know how it might perform with a TransTEC beetle drivetrain (1106 4500kv) and 3s.
@CoppertopFPV
Жыл бұрын
The beetle was a similar weight and mine flew well so I'd imagine it's viable.
did you fly a full gopro8 on that little thing?
@CoppertopFPV
2 жыл бұрын
Stripped hero 8
@pixelcomet
2 жыл бұрын
@@CoppertopFPV ok thx. then I need a 3.5" rig
@CoppertopFPV
2 жыл бұрын
@@pixelcomet it'll carry a hero but won't be fun. Give it a month or so and I reckon there'll be a bigger one
Can u share the stl of your camera mount? Please🙏🙏 brilliant idea
@CoppertopFPV
Жыл бұрын
www.thingiverse.com/thing:5454617 if I was building this again I'd probably add the cap holder to the rear antenna mount as this thing got more and more complicated 😅
@fenuaenata
Жыл бұрын
Do it ahahah do the cap holder like this it will get better anyway awsome job thanks i ll print it soon
I need help my fox25 is wobbling
where the PIDs?
@CoppertopFPV
2 жыл бұрын
In the vid