Ok guys what does it mean if your Fuse is fine and you got a new flasher module and still nothing
@sfm2422 ай бұрын
Great video! I would’ve liked to have seen you go further into the engine with the cam and lifters, timing chain and guides
@Hendogg282 ай бұрын
The only way they can get you for milage tempering is if you take say a car with 200k and add a cluster with 175 or 150k and try to pass it off with lower miles. You can however add a cluster with 205k or more and you will be fine. You can add more miles to a car and not have to disclose that the car has less miles than the cluster shows. Just not the other way around..
@majidali44373 ай бұрын
Really helpful, thanks for sharing, saved money.
@jorgepomales74564 ай бұрын
My brother got to tell you what a great idea I was on my way to AutoZone to get brake cleaner which everybody says that's the best thing to use then I checked out your video while I was driving and you mentioned the gas and I made a quick u-turn went back home I had some gas in can , did it and it worked perfect thank you 😁
@aloneranger39805 ай бұрын
Forget the music..... talk to me.
@zackgaming90865 ай бұрын
you are the man, thank you!!
@prospexican6 ай бұрын
were did u get the head from?
@dontibbitts94906 ай бұрын
Good video.. but I definitely would have just pulled the engine out. You pretty much did all the work to do that anyway.. then inspect the whole engine. You got REALLY lucky there wasn't any metal valve seat pieces in the block..
@gynnbox7 ай бұрын
Hello, what is the cost to rebuild that engine?
@ronoswalt61617 ай бұрын
AWESOME video Sir! Excellent narration and some very good tips. Count me in as a subscriber!
@HemiSRT7 ай бұрын
Nice video, just wondering why didnt you change the coolant tank because it looks very rusty
@spongebobsquarepants64708 ай бұрын
Thank you 🙏
@sonnykozeyah81569 ай бұрын
do you have to reprogram cluster ?
@TheWoundedNinja9 ай бұрын
The forums said bsck it off 1/3but the fact that he did 6 clicks, full tighten is genuis
@mihaiserbanescu867610 ай бұрын
I just bought a miata that stood for 3 years. Now it sits in my driveway waiting for parts, however, I do have this part. It looks like a project for this afternoon, especially since it now has no petrol in it. I'll fill some after and hopefully it will run a little better.
@wertbe171810 ай бұрын
Excited to try this. I don't understand why people put tinting on, it usually never looks good.
@dr.professordan12610 ай бұрын
BRING IT BACKKKK
@dr.professordan12610 ай бұрын
Make some more content my guy!!!!!!!!!!!!!!!!!!!!!!!
@izaacsilva914810 ай бұрын
At least on the 300 C that I know of
@izaacsilva914810 ай бұрын
The cooling fans don’t exactly have to go up through the bottom you just gotta remove the upper radiator hose and turn the fans on. It’s on its side it’ll come right up.
@billvickers553410 ай бұрын
My 2011 Ram HEMI 5.7 at 93k miles broke a valve spring and my #3 intake valve hit the piston. Dealer wanted $13k to replace the engine. Will do what you did to save money. Thanks for the video. My only feedback is why didn't you replace the lifters and cam while you were there? They cause the same failure modes.
@jameschuke410411 ай бұрын
The bushing need to be replaced or your wasting you time
@sneakermancano11 ай бұрын
Where can I buy all the parts you ordered I wanna go your route
@posford11 ай бұрын
smart ass . . its easier when you have 3 hands 🤣😂🤣😂🤣
@posford11 ай бұрын
hi.. your link is of course dead now, can you tell what brand you installed ? i need one for my NB Thanks - -
@kyleg147411 ай бұрын
Thank you so much! Was dreading having to spend the money on a new set of tail lights for my RX-8. Previous owner put the tint spray on thick.
@53prime Жыл бұрын
Might wanna get that exhaust leak checked out ;)
@bensilvy4826 Жыл бұрын
What are you putting it in?
@kellypotter8759 Жыл бұрын
I installed LED side markers and I need to change out my flasher RELAY I can't find any videos to help me. its a little black box, not this grey thing
@OsloCosmo Жыл бұрын
Works! Thumbs up!
@overlordisgoogle8431 Жыл бұрын
Noice
@m.worthy Жыл бұрын
⛽ *"DIESELGATE"* ⛽ _"As part of a legal settlement with California, VW is required to spend $800 million in the state on electric vehicle infrastructure and promoting "awareness"..._ and _"another $1.2 billion outside California promoting electric vehicles."_ Across the USA, for instance, _"the Volkswagen settlement helps pay for installing electric charging stations."_ 📖 *DANIEL YERGIN* , _'The New Map' (New York: Penguin Press, 2020), p335-336 and p340._
@deveauxgauger6896 Жыл бұрын
This was extremely helpful, thanks! I saw the comments about the excessive fuel runoff. I went through the full fuel system depressurization process (disconnecting fuel pump electrical and starting it, plus opening fill cap) and still flowed out non-stop. I think it’s more that the filter is below the tank and gravity/siphon causes this. If I had to do it again, would use some kind of clamp on the hose. Appreciate the work that went into this and that it made it easier for me to do this repair!!
@cgonedfishing Жыл бұрын
How did you determine this was bad? How do you test it?
@alexchumbarskiy4313 Жыл бұрын
good job only thing is never spin the crankshaft on the bears befote putting the caps on. yeah never do that again. can actually damage the bearings an scratch the shaft like that, i am actually suprised you did that because you seem very skilled. very good job tho. good comunication. thanks for the video
@cardesinr Жыл бұрын
When you have good machine work and measure the block, your main bearings sit in the block very close to perfect. They may not be perfectly round at the stage before the main caps are torqued down, but they shouldn't be more than 5 thousandths of final spec which will not harm any parts. I spin the crank as a quick sanity check at every assembly stage to check for issues as I build. Main bearings see far more abuse from normal use that anything I would put on it during the build. Thanks for watching!
@BobBobber-pi3dc Жыл бұрын
You deserve way more subs. Awesome content!
@CarguyPOV Жыл бұрын
You lost me at gasoline
@michaelseal1107 Жыл бұрын
Great job I did it all by myself, LOL
@rexgratteaux8655 Жыл бұрын
The BUICK 3800 series 3 is an excellent engine , I've owned a couple of them and they run great withe M90 EATON roots type supercharger , I love the fuel economy and decent power it puts out , great video your car should scoot along nicely for sure , nice job 👍
@l042987 Жыл бұрын
Any concerns rebuilding the bottom of a 3800sc going to do one now..
@Scorpio-tn4vy Жыл бұрын
So was it the overheating or the backfire?
@Scorpio-tn4vy Жыл бұрын
I'm halfway through the exact process. I'm doing all the pistons and rings since I'm in there. They're che as a set.
@heroknaderi Жыл бұрын
nice job man i enjoyed it keep them coming.
@RobertMartin-wg7nu Жыл бұрын
Hope this works...looking at buying a used Civic from a dealer, but the previous owner spray tinted the taillights, looks like crap...love the car otherwise
@ethancapesauto179 Жыл бұрын
anyone know if you can buy those two fuel lines anywhere?
Пікірлер
dang 6 years later and it cost me $800 for heads.
How did you repair the dropped valve seat?
Ok guys what does it mean if your Fuse is fine and you got a new flasher module and still nothing
Great video! I would’ve liked to have seen you go further into the engine with the cam and lifters, timing chain and guides
The only way they can get you for milage tempering is if you take say a car with 200k and add a cluster with 175 or 150k and try to pass it off with lower miles. You can however add a cluster with 205k or more and you will be fine. You can add more miles to a car and not have to disclose that the car has less miles than the cluster shows. Just not the other way around..
Really helpful, thanks for sharing, saved money.
My brother got to tell you what a great idea I was on my way to AutoZone to get brake cleaner which everybody says that's the best thing to use then I checked out your video while I was driving and you mentioned the gas and I made a quick u-turn went back home I had some gas in can , did it and it worked perfect thank you 😁
Forget the music..... talk to me.
you are the man, thank you!!
were did u get the head from?
Good video.. but I definitely would have just pulled the engine out. You pretty much did all the work to do that anyway.. then inspect the whole engine. You got REALLY lucky there wasn't any metal valve seat pieces in the block..
Hello, what is the cost to rebuild that engine?
AWESOME video Sir! Excellent narration and some very good tips. Count me in as a subscriber!
Nice video, just wondering why didnt you change the coolant tank because it looks very rusty
Thank you 🙏
do you have to reprogram cluster ?
The forums said bsck it off 1/3but the fact that he did 6 clicks, full tighten is genuis
I just bought a miata that stood for 3 years. Now it sits in my driveway waiting for parts, however, I do have this part. It looks like a project for this afternoon, especially since it now has no petrol in it. I'll fill some after and hopefully it will run a little better.
Excited to try this. I don't understand why people put tinting on, it usually never looks good.
BRING IT BACKKKK
Make some more content my guy!!!!!!!!!!!!!!!!!!!!!!!
At least on the 300 C that I know of
The cooling fans don’t exactly have to go up through the bottom you just gotta remove the upper radiator hose and turn the fans on. It’s on its side it’ll come right up.
My 2011 Ram HEMI 5.7 at 93k miles broke a valve spring and my #3 intake valve hit the piston. Dealer wanted $13k to replace the engine. Will do what you did to save money. Thanks for the video. My only feedback is why didn't you replace the lifters and cam while you were there? They cause the same failure modes.
The bushing need to be replaced or your wasting you time
Where can I buy all the parts you ordered I wanna go your route
smart ass . . its easier when you have 3 hands 🤣😂🤣😂🤣
hi.. your link is of course dead now, can you tell what brand you installed ? i need one for my NB Thanks - -
Thank you so much! Was dreading having to spend the money on a new set of tail lights for my RX-8. Previous owner put the tint spray on thick.
Might wanna get that exhaust leak checked out ;)
What are you putting it in?
I installed LED side markers and I need to change out my flasher RELAY I can't find any videos to help me. its a little black box, not this grey thing
Works! Thumbs up!
Noice
⛽ *"DIESELGATE"* ⛽ _"As part of a legal settlement with California, VW is required to spend $800 million in the state on electric vehicle infrastructure and promoting "awareness"..._ and _"another $1.2 billion outside California promoting electric vehicles."_ Across the USA, for instance, _"the Volkswagen settlement helps pay for installing electric charging stations."_ 📖 *DANIEL YERGIN* , _'The New Map' (New York: Penguin Press, 2020), p335-336 and p340._
This was extremely helpful, thanks! I saw the comments about the excessive fuel runoff. I went through the full fuel system depressurization process (disconnecting fuel pump electrical and starting it, plus opening fill cap) and still flowed out non-stop. I think it’s more that the filter is below the tank and gravity/siphon causes this. If I had to do it again, would use some kind of clamp on the hose. Appreciate the work that went into this and that it made it easier for me to do this repair!!
How did you determine this was bad? How do you test it?
good job only thing is never spin the crankshaft on the bears befote putting the caps on. yeah never do that again. can actually damage the bearings an scratch the shaft like that, i am actually suprised you did that because you seem very skilled. very good job tho. good comunication. thanks for the video
When you have good machine work and measure the block, your main bearings sit in the block very close to perfect. They may not be perfectly round at the stage before the main caps are torqued down, but they shouldn't be more than 5 thousandths of final spec which will not harm any parts. I spin the crank as a quick sanity check at every assembly stage to check for issues as I build. Main bearings see far more abuse from normal use that anything I would put on it during the build. Thanks for watching!
You deserve way more subs. Awesome content!
You lost me at gasoline
Great job I did it all by myself, LOL
The BUICK 3800 series 3 is an excellent engine , I've owned a couple of them and they run great withe M90 EATON roots type supercharger , I love the fuel economy and decent power it puts out , great video your car should scoot along nicely for sure , nice job 👍
Any concerns rebuilding the bottom of a 3800sc going to do one now..
So was it the overheating or the backfire?
I'm halfway through the exact process. I'm doing all the pistons and rings since I'm in there. They're che as a set.
nice job man i enjoyed it keep them coming.
Hope this works...looking at buying a used Civic from a dealer, but the previous owner spray tinted the taillights, looks like crap...love the car otherwise
anyone know if you can buy those two fuel lines anywhere?
Whats mpg?
Valve covers are backwards