Пікірлер

• 
  @albertocardinali513413 сағат бұрын

  Thanks

• 
  @maintenanceman10154 күн бұрын

  Never seen that style of hinge wonder what you might use that on.

• 
  @DGPSUK3 күн бұрын

  @@maintenanceman1015 Hi, it's used on tilt and turn windows and doors. 👍

• 
  @jovandesmond83194 күн бұрын

  🎉

• 
  @johnhealy451110 күн бұрын

  Thanks i opened it the wrong way and was about to take back to the store saying i was given 2 left hinges😂

• 
  @DGPSUK10 күн бұрын

  We hear it all the time 🤣 glad we could help 👌

• 
  @melissaa.77311 күн бұрын

  We can skip ALL THE TIME you're screwing around

• 
  @DGPSUK11 күн бұрын

  Sure you can 😊

• 
  @venividivici140117 күн бұрын

  👌

• 
  @jovandesmond831917 күн бұрын

  Hey, do you guys buy windows already tinted or you do it yourselves ? And is there any difference in quality If one applies it in their own shop?

• 
  @kaitlinmcnulty876221 күн бұрын

  Very helpful , Thankyou

• 
  @DGPSUK21 күн бұрын

  Very welcome 😊

• 
  @jovandesmond831929 күн бұрын

  What window design software do you use ?

• 
  @DGPSUK28 күн бұрын

  www.windowlink.com/

• 
  @jovandesmond8319Ай бұрын

  hello , can a copy router be used to create the water drainage slots?

• 
  @DGPSUKАй бұрын

  Hi, yes it can 👍

• 
  @julianengel492Ай бұрын

  So how do I adjust it if it is too low?

• 
  @DGPSUKАй бұрын

  Hi, you can adjust the door via the hinge adjustment or re-pack the glazing to pull the door back into alignment.

• 
  @seanmck46Ай бұрын

  Thank you

• 
  @DGPSUKАй бұрын

  Very welcome 🤗

• 
  @jovandesmond8319Ай бұрын

  what tool do you guys use to punch the interlock for windows ?

• 
  @DGPSUKАй бұрын

  Can you elaborate on interlock ?

• 
  @jovandesmond8319Ай бұрын

  @@DGPSUK kzread.infoSY9tFDVFp9A?si=j_E0182fc6jMf-RK the top groove that fits into the frame.

• 
  @jovandesmond8319Ай бұрын

  How long would it take someone to learn upvc window manufacturing?

• 
  @DGPSUKАй бұрын

  Around 2-3 months but everyone is different.

• 
  @jovandesmond8319Ай бұрын

  Can you one day show us your shop ? How big is it and what essential areas and tools you have .thanks

• 
  @DGPSUKАй бұрын

  Snap shot... kzread.info3o8KkfGXF_0?si=mXvdrxlbq_CmqEBb

• 
  @urosmadzarev3925Ай бұрын

  tried it, doesnt work my down seal is not even touching the metal part i need to push it down but it doesnt wanna budge at all

• 
  @DGPSUKАй бұрын

  Hi, could you email us some images and we can see if we can help [email protected]

• 
  @naheedayub139Ай бұрын

  Thank you so much

• 
  @DGPSUKАй бұрын

  Very welcome 😊

• 
  @zubkat5196Ай бұрын

  Any tips for when you don’t have a vice?

• 
  @DGPSUKАй бұрын

  Hi, unfortunately not as they are fixed in there solid, sorry.

• 
  @shuyeburrahman3362Ай бұрын

  Why do all this we you can just install a new and open the window

• 
  @DGPSUKАй бұрын

  To gain easier access to repair the window when the lock has failed.

• 
  @TheFakeyCakeMakerАй бұрын

  Hello, thank you for this video and taking the time to answer questions. I'd like to know if the restrictor stops the door from slamming shut. Thank you.

• 
  @DGPSUKАй бұрын

  Hi, it doesn't but we do offer a similar restrictor which does... www.double-glazing-parts-spares.co.uk/Hold-Open-Door-Restrictor

• 
  @user-zf5jj3hq7wАй бұрын

  That's why that side is the inside of the window and now the outside... 🤦‍♂️🤦‍♂️

• 
  @gilesusher72992 ай бұрын

  Excellent thanks ♥

• 
  @DGPSUK2 ай бұрын

  Very welcome 😊

• 
  @meshk1002 ай бұрын

  Hi there, over the last few years a few of my Windows won’t open. The handle turns but the window won’t push open. One by one this has been happening and now I have 3 Windows that won’t open! Is this likely to be that the spindles have worn over time? Can I buy replacement spindles from you, or is it easier just to buy a new handle? I’m thinking of replacing all the handles on my Windows as it’s probably a matter of time before they all ending up going!

• 
  @DGPSUK2 ай бұрын

  Hi, it could be the spindles have worn or the actual locking mechanism is broken, try a good handle in a window that doesn't work to see which is the issue. Send some images over to [email protected] for lock identification if you find it's the lock, but yes easier to replace the whole handle rather than the spindles themselves. Regards Steven

• 
  @meshk1002 ай бұрын

  @@DGPSUK thanks for the reply. Do you need any pictures in particular?

• 
  @meshk1002 ай бұрын

  @@DGPSUK hi there, I’ve emailed some pics over to you now, I think it could be the locking mechanism!

• 
  @SiHumphrey2 ай бұрын

  I'd watched this video about 20 times before I attempted on my windows. I got a 13mm HSS bit especially for the job, but it would sometimes catch in my uPVC and my hand drill struggled, so in the end I used an oscillating multitool which worked much better. I marked out the template on masking tape as my window frames are black, then cut carefully along the lines. I used a smaller drill bit for the rounded edges. Hope someone else finds this useful. Actually quite straightforward once you know what you're doing.

• 
  @DGPSUK2 ай бұрын

  Thank you for the great info, 😊😊

• 
  @pepijarak33932 ай бұрын

  Where can it be bought please?

• 
  @DGPSUK2 ай бұрын

  Hi what size do you need. Steven

• 
  @susancreed84302 ай бұрын

  Thank you, just changed my handle, thank you

• 
  @DGPSUK2 ай бұрын

  Very welcome and thank you for commenting 😊

• 
  @cunniffelove2 ай бұрын

  My screw become blunt as i screw into the door frame as it seems solid. Any suggestions?

• 
  @DGPSUK2 ай бұрын

  Hi, could you send an image of the issue to [email protected] 😊

• 
  @MissMalikaA2 ай бұрын

  Are the end caps removable? I have had mone pop off when my footgot trapped in the door, and trying to reattach it before anyone notices 😂

• 
  @DGPSUK2 ай бұрын

  Yes they are 😊

• 
  @MissMalikaA2 ай бұрын

  @DGPSUK thank you 😂 I didn't know if they were clip once and that's it. I managed to get it off and back on. Thanks again

• 
  @DGPSUK2 ай бұрын

  @@MissMalikaA yes exactly although some suppliers super glue them on 🙄

• 
  @rupertwinston-hayes37902 ай бұрын

  Filmed to far away

• 
  @DGPSUK2 ай бұрын

  Hi, if you need any extra close up shots of a certain detail just let me know 👍 all feedback welcome 🤗

• 
  @Theflowoflove2 ай бұрын

  Tried everything per instructions, yet the mid post structure would not remove. Any suggestions, as I couldn't find any further hidden screws !

• 
  @DGPSUK2 ай бұрын

  Hi, can you see the screws?, send me some images to [email protected]

• 
  @Theflowoflove2 ай бұрын

  @@DGPSUK Hi, many thanks will have a closer look tomorrow.

• 
  @DGPSUK2 ай бұрын

  @@Theflowoflove it could be the type where you need to remove the glass pane to get to the screws, some companies do it that way to conceal the screws.

• 
  @Theflowoflove2 ай бұрын

  @@DGPSUK Thank you so much. You are very helpful. BR

• 
  @DGPSUK2 ай бұрын

  @@Theflowoflove absolutely no problem at all 😊 always happy to help

• 
  @terrymorton99412 ай бұрын

  Thanks the most informative on youtube.

• 
  @DGPSUK2 ай бұрын

  Thank you 😊

• 
  @steveaga46832 ай бұрын

  I can't even remove the cover cap!

• 
  @DGPSUK2 ай бұрын

  Hi send me an image to [email protected]

• 
  @steveaga46832 ай бұрын

  @@DGPSUK I managed it in the end! However, I appreciate your swift response! Thank you

• 
  @DGPSUK2 ай бұрын

  @@steveaga4683 excellent 👌 and very welcome

• 
  @steveaga46832 ай бұрын

  @@DGPSUK As I said, I managed to remove the handle, but I still can't get the mechanism to work. Window is still shut in the partially open stage! Looks like the whole mechanism inside the window is buggered!

• 
  @DGPSUK2 ай бұрын

  @@steveaga4683 can you email me an image of the lock and I'll identify it for you 👍

• 
  @Delicrunch3 ай бұрын

  I am not skilled at all and was already thinking in paying a handyman to change my window handle but I decided to check youtube for a video that could help me do the job.And yours was by far the easiest and most clear video.Went to the shops bought the handle and in 20minutes the job was done.Thank you for having the time to post such fantastic and helpfull videos.

• 
  @DGPSUK3 ай бұрын

  Many thanks, means a lot. I do these at the weekend on request and a few extra videos of what i think would help people 😊 so these comments make it all worthwhile. Thank you

• 
  @AceGod73 ай бұрын

  is this left or right handle i got a universal one but does turn the other way round

• 
  @DGPSUK3 ай бұрын

  These are non handed so suit both ways. Normally handed handles are a cranked shape.

• 
  @lucylindsay3442Ай бұрын

  ​@DGPSUK I had a daft question - bought a universal handle. I want to open to left, so locked when inline with the mechanism (down) and left and open. Atm it is going to the top to open. Is it upside down? How does it 'know' which way around it is working? Do I need to spin the spindle? Sorry daft I know.

• 
  @DGPSUKАй бұрын

  @@lucylindsay3442 Hi are you installing the handle different to what it was originally, if so you need to remove the lock and reverse it, you will also need to move the locking keeps. Let me know if you would like a video done to show what I mean. 👍

• 
  @lucylindsay3442Ай бұрын

  Thank you - definitely was being daft but I finally have a replaced handle. V. V. Helpful video (although cutting the screws was also 'fun').

• 
  @captainnemo2473 ай бұрын

  My top bathroom window handle was just flopping about with the window locked, the handle not doing anything. Took it off with the two screws.The spindle had almost disappeared into the mechanism. Had to fish it out with some tweezers. Tapped it back in to the handle as it appears to be a friction fit. Refitted it with a bit of difficulty.With the window open fitted the handle in the open position and all is good. Makes you wonder if a longer spindle should have been fittted in the first place. Is it a common thing these spindles working loose?

• 
  @DGPSUK3 ай бұрын

  Hi, yes it's fairly common for the spindles to get stuck in the locks, we see it a lot in our coastal area due to the salt air. The spindle should be long enough to just pop out the other side of the lock when installed.

• 
  @kevinkiernan67283 ай бұрын

  Looks great just what I’m looking for can I use something like “Sticks Like Sh*t” to secure it ?

• 
  @DGPSUK3 ай бұрын

  Yes that works well to stick it down 👍 or even a decent silicone 👍

• 
  @jovandesmond83193 ай бұрын

  are shashes reinforced as well ? example in a 4x4 window

• 
  @DGPSUK3 ай бұрын

  Yes we do

• 
  @Yigpjsy20243 ай бұрын

  Do you have a video on how to adjust door on this particular hinges please

• 
  @DGPSUK3 ай бұрын

  We don't have one at present but I'll put it on my list...This may help kzread.info/dash/bejne/aoajtKtyp7S2nZc.htmlsi=wX0imY6FC4JaOHLv

• 
  @aldavis26924 ай бұрын

  what size screws

• 
  @DGPSUK4 ай бұрын

  Hi, we use 3.9 x 32mm

• 
  @aldavis26924 ай бұрын

  are they self drilling@@DGPSUK

• 
  @DGPSUK4 ай бұрын

  @@aldavis2692 yes self drilling as there should be reinforcement in the frames 👍

• 
  @aldavis26924 ай бұрын

  I can only dfind 4mmx 32 will these do @@DGPSUK

• 
  @aldavis26924 ай бұрын

  @@DGPSUK are the measurements the same for 90 degree oppening 110 from edge thank you

• 
  @jovandesmond83194 ай бұрын

  hey quick question are upvc profiles always reinforced or is it only used at certain lengths ?

• 
  @DGPSUK4 ай бұрын

  Hi, we prefer to reinforce all our windows, some companies only use it at certain lengths as you mention, more so with white. All colour/foiled frames should be reinforced.

• 
  @jovandesmond83194 ай бұрын

  thanks a million @@DGPSUK

• 
  @DGPSUK4 ай бұрын

  @@jovandesmond8319 no problem at all 👍👍👍

• 
  @jovandesmond83194 ай бұрын

  @@DGPSUK do you know the cost of upvc profile systems from suppliers ? cost per tonne or length ?

• 
  @DGPSUK4 ай бұрын

  @@jovandesmond8319 all suppliers/extruders price differently, we have our own tailored price list from our profile supplier.

• 
  @lardy70s4 ай бұрын

  My screw centres are 165mm. Can't find any handles anywhere?.

• 
  @DGPSUK4 ай бұрын

  Hi, we can supply them but only in Chrome, they were discontinued around 8 years ago.

• 
  @19blox4 ай бұрын

  Excellent thankyou 😃

• 
  @DGPSUK4 ай бұрын

  Very welcome 😊

• 
  @ChrisTheSparky4 ай бұрын

  This is great but try this on my brown door that's right up against the wall...

• 
  @DGPSUK4 ай бұрын

  Ah yes not so easy 😞

• 
  @ChrisTheSparky4 ай бұрын

  @@DGPSUK Thanks for the great vid, I managed to get a torch down the wall to see things and now the key turns like silk 👍🏽

• 
  @DGPSUK4 ай бұрын

  @@ChrisTheSparky excellent I'm glad these videos help, even just to point anyone in the right direction 😊

• 
  @jovandesmond83194 ай бұрын

  When it comes to the cutting of glass ? What type of glass is used and is it done with hand tools or machine only?

• 
  @DGPSUK4 ай бұрын

  We no longer manufacture our own glass, it's all bought in ready made but there are very many options of glass to choose from. We did hand cut all of our glass. The standard DGU we use is: 4/20/4 (28mm overall) 4mm clear float 20mm warm edge spacer bar 4mm clear float Low e Argon filled

• 
  @jovandesmond83194 ай бұрын

  @@DGPSUK what's tools do you use for cutting the 4mm float glass ?

• 
  @DGPSUK4 ай бұрын

  @@jovandesmond8319 diamond tipped cutter and a long set square designed for glass

• 
  @davykeenan4 ай бұрын

  Yeah that's crazy bro. Explains a lot 😂😁😂 Each to their own though, if it makes you happy 😊

• 
  @MissArdenUK4 ай бұрын

  Yes, definitely odd 😂😂😂

• 
  @jovandesmond83194 ай бұрын

  whats the best way to go about leaning to fabricate windows? are there teaching sessions available to your knowledge ?

• 
  @DGPSUK4 ай бұрын

  Hi, I don't believe there is such a thing as teaching sessions for specifically fabrication, but you could maybe try offering a company some of your free time in a factory that manufactures windows and doors to gain extra knowledge 🤷

• 
  @jovandesmond83194 ай бұрын

  is there a tool to drill the three handle holes without a huge machine ?

• 
  @DGPSUK4 ай бұрын

  Hi, not one that I've seen but I suppose you could easily rig up a small template and use an 8mm & 10mm drill bit

• 
  @jovandesmond83194 ай бұрын

  @@DGPSUK ok thanks 👍🏿

• 
  @jovandesmond83194 ай бұрын

  are your mullions welded to the upvc frames or drilled into it ? thanks

• 
  @DGPSUK4 ай бұрын

  Hi, we manufacture both options welded and mechanically jointed. I personally prefer the mechanically jointed look 👍

• 
  @ghengis4305 ай бұрын

  My back door opens outwards, and gets battered against the sill in the wind. Would this be strong enough to withstand a gust?

• 
  @DGPSUK5 ай бұрын

  Hi, it will stop the door going by 90 degrees but doesn't hold the door open.