Mr Fred’s DIY Garage School
Mr Fred’s DIY Garage School
Welcome to Mr Fred's DIY Garage School! Your KZread source for fixing, fabricating and DIY projects! Watch along as I repair and build all kinds of stuff. If you don't see a video for a topic you are looking for be sure to drop me an email with your suggestions! Thanks for watching!
🙂Full disclosure here, I do receive a small commission from traffic that I drive to my affiliate links.
-----------------------------------------------------------------------------
🙏Help me fund future projects!
$❤️$ Use the "Thanks" Button on any of my videos
OR
☕️ www.buymeacoffee.com/mrfredsdiy
--------------------------------------------------------------------------------
For Businesses Inquiries please Email:
[email protected]
Mr Fred
505 E Windmill Lane
STE 1C -217
Las Vegas NV
89123
Пікірлер
Mate, great tips but I'm not too sure that it's a good idea to be doing it so close to a gasoline can (that appears to be sitting on a car battery?)
I wonder if using a block of ice would last longer ?
Interesting idea!
could i row this upstream on a river for 1 kilometer with 300lbs worth of load ? (2 people and camping gear) or will the current prevent me from advancing
This dude is the real life resident alien.
Why change thr spark plug out of the box?
Insulate and burn up your generator for only 30 bucks? Wow. Yo, you need a install a fan or something for cooling...
We did a heat testing video with surprising results! kzread.info/dash/bejne/hq1sw6xrdcvFh6w.htmlsi=pwiEiUtqb41LXjmp
great video!
Did you honestly really get the garage door tension springs readjusted? How much does that cost? I'd be willing to best most people don't go that far and I'm curious if it's really required.
Thanks for checking out the video! My springs definitely needed to be adjusted. There are videos all over KZread for how to adjust your springs, but I wasn’t comfortable doing it at the time. My garage door guy is super reasonable and a friend. Whatever a service call would cost is what they would charge plus, they would probably lube everything up for you!
All equipment runs smoother with the smoke still inside. Once you let let the smoke out it gets expensive 😂
Line the inside with soft egg create foam
Thank you for this video. Is the burner tube supposed to loosely fit onto the valve assembly?
Ours fits loose. It just slides over the valve assembly.
lol brunt is trash
I love my Brunt boots! I’ve been wearing them for a year and they are great.
Why 2 separate ground wires?
Because the trailer “folds on hinges” using the frame as the ground was challenging. The frame is pained very well, including the bolt holes. Running a ground wire to every lamp just made sense.
Cost of project?
Great question! The project is not completely finished yet. When the full video publishes there will be a cost breakdown.
Full video coming soon! Questions? Comments? Concerns? Let me know and I will try to answer!
what is the link or name of that adjustable circular tool to drill the big hole? thanks
That is an adjustable hole saw. They can be a little challenging to use. Here is a link amzn.to/3LclpmN
Thank you for link!
Try rubber sheets from McMaster in hardnesses then vent the cover both sides with intake and exhaust. Great ones on yours
This is awesome. Definitely makes me want one
Thanks for checking out the video! Here is a playlist for a new trailer I have:kzread.info/head/PLN1CtBYDO93QRLWBz9EYQiLCTUErjC94K&si=_JYiWn3vqhS2AL_m
Thank you so much for this video!! This saved my Q1000 from being thrown into Mutiny Bay I was so darn mad at it. Your process and the parts listed in the description were absolutely the perfect fix for my grill that I knew worked, but I could not get the regulator do not pop into bypass mode no matter what I tried. I spent about 10 minutes on this and the flame kicked right up. Thank you again!
I’m just trying to figure out how to do what the instructions say with what’s already given in the package…..
So is it a total of 16 hours?or do you change it every time you hit the hours?
I'm trying to figure out if this Chinese sink I purchased off ebay is worth installing. I purchased it for less then $200 and it's a nice looking sink however the darn thing doesn't come with clips or anything to clip them to if I had them. The only way to install would be to simply drop in with either silicone which is what I usually do or construction adhesive which I've never used for a sink but I'm concerned it may move. If I install it I can't return the darn thing. Anyone ever just use adhesive and not use the clips? I could use some ideas. I would not had bought the thing knowing it doesn't have clips
Glad I watched this, I personally don't want color changing rock lights under the trailer. But I do want to build a box on the trailer to hold fishing gear and have lights inside that box. Then build two kayak frames on top of the box. These videos walking through this trailer are top notch!
I honestly just like to have the white light under the trailer. The fact that they change colors was incidental lol. Thanks for checking out the videos. I have a few more to make with this trailer, i.e. flooring system, handrail, 13 inch wheel upgrade & spare tire mount on the tongue.
@@MrFredsDIY I've subbed! Can't wait to see future mods! You'll probably be done by the time I get around to buying the trailer (I'm just now pinpointing exactly what kayak I want to purchase lol). It's also very helpful you link all the products you use. Now that I think of it, some rock lights underneath may not be a bad idea while camping/fishing at night. So I may end up needing 2-3 switches on that 7-pin box.
What's the name of that tool in the first scene?
You should wear long gloves and eye protection at least , had to rush a guy to the er part of the blad went through his wrist So, temp is the least of my concerns
Is this too hot for an angle grinder under normal use? Leave a comment and tell me your thoughts! I think it’s a bit warm…
Does this work for the traveler????
Electrical tape made me feel better too when I used it😊
Excelent.
this tutorial was so easy to follow! my gf is so happy with her new easel, thanks for posting this!
That’s fantastic! I use mine all of the time making videos. Thank you for watching.
You should try fixing the 2 sheets together with a continuous hinge so you can fold them together, and they won't come apart. Also, the carpet should be enough if you folded it over the edges so the noodles probably wouldn't be needed. Great video.
I’m working on either a hinge or some kind of steel bracket to better join the two pieces of floor. I have modified the edges of the floor with great stuff expanding foam! I show that in my latest video for this boat. You can watch it here kzread.info/dash/bejne/gH931NBvc6bVd7g.htmlsi=G0zL7wWS7nxJVZLS
If you do the flooring structure correctly you can mount a gas motor to it I have done it
I don't have a swamp cooler but found this video very useful. 8:00 Step 2 should have been to use The Works Toilet Bowl Cleaner. It eats rust fast. Will leave it very clean in anywhere from 3 seconds to 3 min. Use a plastic pan under just in case there are holes. I will make a frame of 2x4 and use either plastic from a roll or cut a contractor bag, for large items. For long items I have various sizes of PVC with just a cap on one end. Some I have a clean-out adapter on the other end. Then a male adapter on another section of PVC with another clean-out adapter on the other end. So 2' base, then 2' extender, 1' extender, or 6" extender. Don not cap the end and seal. There are gasses that are barely noticeable when doing this outside in open air but they are there. Wear glasses if brushing off. A face shield would be good too. I tend to just rinse off with hose. When brushing off is needed, I wear mask and glasses min.
do they sell one adapter that work instead of getting three?
Ok how did you find where the holes are for the radiator to screw it down to the lid?
i’m so confused, why not just use the official weber attachment to connect to the 20lb propane tank?
Worth saying again to have a pro adjust your springs. Those things are extremely dangerous
It’s not really $69 if you don’t have all the tools as well.
I have the 8amp rat tail grinder. I wonder what the performance difference if any is betwen both 8amp grinders.
Great question! So many grinders… so a little time! lol
You used an inverter for this test? Why? 🤨
i like the boat as much as i like the xterra!!!!
Sometimes if a batt wont recharge, try different chargers. I don't know why but some chargers work better on restarting a lifepo4 than others.
Awesome video. I learned a lot and appreciate the time you took going over each step.
Glue some egg carton foam on the inside four surfaces
Excellent!!! Just what I needed to know!!🌹
why wouldn't you show us a side by side comparison with and without the cage?
52.5db to 49db is not really worth it. I measured my Preditor 5,000 watt generator at 1 foot, and the db was 87db, not the 60db that Harbor Freight claims. They would not post my review. I have used db meters for years in aviation for aircraft p.a. checks and adjustments.
Love the concept. 8 dB is not that much though.
I have 2.0.7 but still doesn’t work on 2011 4runner any advice
Same but for Acura to 2012
Which cooler design lasted the longest and is your best ?