Is it better to assemble the hitch on the tractor or put it together and then slip it on? My tractor is out of state, but the hitch just showed up in a box today.
@LSRWvlog18 күн бұрын
I put it together first and slipped it on
@MikeOrazzi17 күн бұрын
@@LSRWvlog Thanks. I didn't get a chance to open the box yet, but maybe today.
@tedburkholder8156Ай бұрын
What's the part?
@tpharo34Ай бұрын
Did you sell it? How much did you get? I’m thinking of selling mine
@LSRWvlogАй бұрын
Yes I did sell it and got $800 for it
@tonynimmons111Ай бұрын
Great video. I’m looking to upgrade my truck now.
@danew637Ай бұрын
10$ part and $200 worth of labor :)
@ajpalomino7780Ай бұрын
This guy sits down the pee
@erikhofmann8261Ай бұрын
My 2024 Road Glide does the same thing. Will that fix work for the M8 motor?
@LSRWvlogАй бұрын
That I do not know
@brettlowery3121Ай бұрын
So do you only need to replace two of those per cylinder???
@kennylavay8492Ай бұрын
That ticking sound is just the heart beat of a Harley.
@mickc46332 ай бұрын
Man, you’re hard on the paint. Holy crap.
@georgepeterhansen2 ай бұрын
Thanks, I could not tell if the holes were threaded or a nut behind that would be difficult to hold. I lowered mine just 1" and will check bed clearances.
@bobsopinions2 ай бұрын
It might be a good idea to switch out the 2 rear manifold bolts on both sides, they will eventually break off. If you do a DPF delete then don't worry about the bolts.
@bobsopinions2 ай бұрын
Also, check for broken exhast manifold bolts. Many of these have the rear two bolts on both sides broken off. If they aren't replaced the truck will develop a loud squealing noise. Expensive problem to solve. That was the case with a truck I bought, it was quiet for the 1st 100 miles but then the squealing kicked in. The truck is unsellable until this is fixed.
@sethshuman60272 ай бұрын
Lol....its how i learned how to weld...i took some classes later on then If you live near okc, ill have yah come by and i will help yah
@LSRWvlog2 ай бұрын
That would be awesome but I am near Austin
@hydejarod2 ай бұрын
everyone who has welded has had a first time this is the kind of stuff you can practice on and it doesn't matter that much if it works great if it breaks do it again. part of the problem is it is a flux core welder.
@krystalcain45552 ай бұрын
Thank you for the video!! It can be done by one person. You must be very strong. Two people would be helpful to lift and remove.
@LSRWvlog2 ай бұрын
I wish I had an extra set of hands, but the job got done
@georgetaylor59422 ай бұрын
Best tip to buy a used 6.4 powerstroke DON’T😂
@NickDemers-rh6dw3 ай бұрын
If you install these make sure to loosen all 4 rocker plate bolts and tighten them evenly! The shims also center the rocker plate!
@TunaCat9293 ай бұрын
Fummins swaps are not simple or cheap
@freakinowned4 ай бұрын
Those brackets that you couldn’t get to line up you need to swap. The bent part in should stick out
@almartinez34154 ай бұрын
Awesome video
@johnlomasney4 ай бұрын
Practice makes perfect ❤
@user-ik5uy3qs9p5 ай бұрын
Why doesn't Harley Davidson do these things at the factory! God knows we pay enough for their bikes! My 44k 2018 CVO is known for the oil scavenging problems. Again, why? I am planning on an aftermarket oil pump and cam plate replacement this year.
@dh-xs9ee5 ай бұрын
I bet the crank split, what does everyone else think
@dh-xs9ee5 ай бұрын
well what happened to the bike
@richarddubois55295 ай бұрын
Replace the engine oil filter and cut open the old one.
@richarddubois55295 ай бұрын
Trans fluid must be a nice red
@richarddubois55295 ай бұрын
Pull a car fax, do a 1 hour road test, get the véhicule at the car wash, check tire pressure before road test, get a complete scan test also remember that most HD pick up trucks are used to pull trailers commercially so the mileage is very likely rolled back. Stay away from deleted trucks.
@fsb_-bf3th5 ай бұрын
Why stay away from deleted?
@gottfriedj16475 ай бұрын
I saw a mechanic using big cutters to cut them and he didn’t have to take out seat fairing or gas tank
@joeyphaze75095 ай бұрын
I have a new to me 14 crew cab, what can I do to get it to sound like this? It’s awesome!
@LSRWvlog5 ай бұрын
Your dpf, cat and muffler need to fall off
@sugmaball53835 ай бұрын
What happened to your f450? I loved that truck.
@LSRWvlog5 ай бұрын
Sold it a few years back. Wish I didn't
@sugmaball53835 ай бұрын
Do you still have it? Update?
@LSRWvlog5 ай бұрын
I do not, unfortunately I sold the truck a few years ago.
@mateomiranda62605 ай бұрын
El que le dió like
@mateomiranda62605 ай бұрын
Eee
@henrykrauss37306 ай бұрын
Boring and terrible sound.
@kevinoneill416 ай бұрын
😢you get that black shit on my clean concrete and we will see what color black turns into when red hits it. Snowflakes 😱
@timteevin45176 ай бұрын
Buy a dead one and Cummins swap it.
@kevinoneill416 ай бұрын
PS on fuel economy just with the DPF and EGR deletes plus getting rid of the stock Cold air filter that just chokes the air to these engines. Get a nice K&R or S&B Cold Air kit will give you noticeable preformce improvements With the deletes and new cold air filter change I improved the MPG by 1/3 that was like better than 5 MPG better and over all performances was like day and night. Also keeep your tunes down I run my tune at stock which is like 30 to 40% mor HP but a I tow a 30ft 5th wheel so I will tap it to tow haul. I know people that will take their tunes to street, but thats just to show off I cant aford to show off. And kicking the tune up to performances mode is just asking for trouble. And trouble on these things is just way😅😅❤
@kevinoneill416 ай бұрын
Just like to say the piston rings in 7&8 are fitted a little loose as well to accommodate the high heat for expansion this is a nother reason that the 6.4 powerstrock has excessive blowby that goes directly through your turbocharger. You you know those highly machined instruments that spin at what 60K or so think of how balance is crucial in there performance and longevity. I have installed a catch can system with baffling, must use 1"tube no kinks I vent to atmosphere with a filtered breather like the veh of 50's and 60's there doesn't seem to be any oil drippings but I can fill up a wisky shot glass of drippings every 5K Serviceing these servings are a must if you want to assure any kind of long life. The next week spot is the rocker arm assembly it just breaks down the plastic parts and wears out the moving parts as there doesn't seem to be enough oil getting in there. But I would have thought someone would have come up with a better after market rocker arm assembly by now. Bill Hewitt rest his sole swore by Arch Oil additives for fuel and oil. But I love my 6.4 Powerstroke. This video has been around for sometime now. Now is Dec.23/2023. My truck has 140K miles on her runs like a fraight train. Stay safe out there. Good video thanks for the info
@hdstubb7 ай бұрын
I’m trying to get my leer camper shell remove too by myself thanks for video
@user-iw8yq5kg6y8 ай бұрын
I seriously need to do this on my 03 Duece. NOT a bike mechanic by any means though
@darryldickson43608 ай бұрын
After an hour and a half I still don't know what happened to the bike😮
@darryldickson43608 ай бұрын
Sounds the same to me 🤔
@gregmurphy61298 ай бұрын
Exhaust pushrod is longest travel
@jsusnicasio13358 ай бұрын
What’s the size of that roll off? 7x14x4? Thanks keep the video coming love the truck too!
@LSRWvlog8 ай бұрын
That is correct and the size is 13yrds
@jsusnicasio13358 ай бұрын
@@LSRWvlog thanks for replying ! Upload more vids when you can I love the look of the ram with the trailer!
@johnblue80298 ай бұрын
You need to wash off your trailer
@outdoorcrazy9 ай бұрын
Doesn’t seem to work on the 5th gen trucks. I press the button and it stays in the exact same height.
@lesliehorton42569 ай бұрын
Excellent video I'll be doing this on my 12 Road Glide 👍
Пікірлер
Sounds the same after all that work to me.
😢
Is it better to assemble the hitch on the tractor or put it together and then slip it on? My tractor is out of state, but the hitch just showed up in a box today.
I put it together first and slipped it on
@@LSRWvlog Thanks. I didn't get a chance to open the box yet, but maybe today.
What's the part?
Did you sell it? How much did you get? I’m thinking of selling mine
Yes I did sell it and got $800 for it
Great video. I’m looking to upgrade my truck now.
10$ part and $200 worth of labor :)
This guy sits down the pee
My 2024 Road Glide does the same thing. Will that fix work for the M8 motor?
That I do not know
So do you only need to replace two of those per cylinder???
That ticking sound is just the heart beat of a Harley.
Man, you’re hard on the paint. Holy crap.
Thanks, I could not tell if the holes were threaded or a nut behind that would be difficult to hold. I lowered mine just 1" and will check bed clearances.
It might be a good idea to switch out the 2 rear manifold bolts on both sides, they will eventually break off. If you do a DPF delete then don't worry about the bolts.
Also, check for broken exhast manifold bolts. Many of these have the rear two bolts on both sides broken off. If they aren't replaced the truck will develop a loud squealing noise. Expensive problem to solve. That was the case with a truck I bought, it was quiet for the 1st 100 miles but then the squealing kicked in. The truck is unsellable until this is fixed.
Lol....its how i learned how to weld...i took some classes later on then If you live near okc, ill have yah come by and i will help yah
That would be awesome but I am near Austin
everyone who has welded has had a first time this is the kind of stuff you can practice on and it doesn't matter that much if it works great if it breaks do it again. part of the problem is it is a flux core welder.
Thank you for the video!! It can be done by one person. You must be very strong. Two people would be helpful to lift and remove.
I wish I had an extra set of hands, but the job got done
Best tip to buy a used 6.4 powerstroke DON’T😂
If you install these make sure to loosen all 4 rocker plate bolts and tighten them evenly! The shims also center the rocker plate!
Fummins swaps are not simple or cheap
Those brackets that you couldn’t get to line up you need to swap. The bent part in should stick out
Awesome video
Practice makes perfect ❤
Why doesn't Harley Davidson do these things at the factory! God knows we pay enough for their bikes! My 44k 2018 CVO is known for the oil scavenging problems. Again, why? I am planning on an aftermarket oil pump and cam plate replacement this year.
I bet the crank split, what does everyone else think
well what happened to the bike
Replace the engine oil filter and cut open the old one.
Trans fluid must be a nice red
Pull a car fax, do a 1 hour road test, get the véhicule at the car wash, check tire pressure before road test, get a complete scan test also remember that most HD pick up trucks are used to pull trailers commercially so the mileage is very likely rolled back. Stay away from deleted trucks.
Why stay away from deleted?
I saw a mechanic using big cutters to cut them and he didn’t have to take out seat fairing or gas tank
I have a new to me 14 crew cab, what can I do to get it to sound like this? It’s awesome!
Your dpf, cat and muffler need to fall off
What happened to your f450? I loved that truck.
Sold it a few years back. Wish I didn't
Do you still have it? Update?
I do not, unfortunately I sold the truck a few years ago.
El que le dió like
Eee
Boring and terrible sound.
😢you get that black shit on my clean concrete and we will see what color black turns into when red hits it. Snowflakes 😱
Buy a dead one and Cummins swap it.
PS on fuel economy just with the DPF and EGR deletes plus getting rid of the stock Cold air filter that just chokes the air to these engines. Get a nice K&R or S&B Cold Air kit will give you noticeable preformce improvements With the deletes and new cold air filter change I improved the MPG by 1/3 that was like better than 5 MPG better and over all performances was like day and night. Also keeep your tunes down I run my tune at stock which is like 30 to 40% mor HP but a I tow a 30ft 5th wheel so I will tap it to tow haul. I know people that will take their tunes to street, but thats just to show off I cant aford to show off. And kicking the tune up to performances mode is just asking for trouble. And trouble on these things is just way😅😅❤
Just like to say the piston rings in 7&8 are fitted a little loose as well to accommodate the high heat for expansion this is a nother reason that the 6.4 powerstrock has excessive blowby that goes directly through your turbocharger. You you know those highly machined instruments that spin at what 60K or so think of how balance is crucial in there performance and longevity. I have installed a catch can system with baffling, must use 1"tube no kinks I vent to atmosphere with a filtered breather like the veh of 50's and 60's there doesn't seem to be any oil drippings but I can fill up a wisky shot glass of drippings every 5K Serviceing these servings are a must if you want to assure any kind of long life. The next week spot is the rocker arm assembly it just breaks down the plastic parts and wears out the moving parts as there doesn't seem to be enough oil getting in there. But I would have thought someone would have come up with a better after market rocker arm assembly by now. Bill Hewitt rest his sole swore by Arch Oil additives for fuel and oil. But I love my 6.4 Powerstroke. This video has been around for sometime now. Now is Dec.23/2023. My truck has 140K miles on her runs like a fraight train. Stay safe out there. Good video thanks for the info
I’m trying to get my leer camper shell remove too by myself thanks for video
I seriously need to do this on my 03 Duece. NOT a bike mechanic by any means though
After an hour and a half I still don't know what happened to the bike😮
Sounds the same to me 🤔
Exhaust pushrod is longest travel
What’s the size of that roll off? 7x14x4? Thanks keep the video coming love the truck too!
That is correct and the size is 13yrds
@@LSRWvlog thanks for replying ! Upload more vids when you can I love the look of the ram with the trailer!
You need to wash off your trailer
Doesn’t seem to work on the 5th gen trucks. I press the button and it stays in the exact same height.
Excellent video I'll be doing this on my 12 Road Glide 👍