What's going on everyone!! Here is a video of a custom sleeve hitch install on old grass hopper. Hit that like and subscribe button!! get in contact with me at Lonestarroadwarrior@gmail.com
Жүктеу.....
Пікірлер: 22
@flaircraft Жыл бұрын
"I had to go run some errands. I bought a welder." Awesome. When I run errands to finish a project it's for 2 dollars worth of bolts or something similar.
@jcholman2801 Жыл бұрын
I love how we all have to give disclaimers and apologize before we let people watch us try to weld LOL I feel your pain.
@LSRWvlog
Жыл бұрын
We have to, the keyboard warriors always have their 2 cents to throw in haha
@overlandtoshore2 жыл бұрын
Grinder and paint makes me the welder i aint. Just lay a thick bead in a circular motion. Should become a rhythm. On those mig welders, turning up wire speed helps sometimes. Take a little bit to learn. Good luck! Nice video.
@hydejarod2 ай бұрын
everyone who has welded has had a first time this is the kind of stuff you can practice on and it doesn't matter that much if it works great if it breaks do it again. part of the problem is it is a flux core welder.
@nevadabadger7925 Жыл бұрын
Greetings from Reno, Nevada. I appreciate the fast unboxing.
@johnlomasney4 ай бұрын
Practice makes perfect ❤
@sethshuman60272 ай бұрын
Lol....its how i learned how to weld...i took some classes later on then If you live near okc, ill have yah come by and i will help yah
@LSRWvlog
2 ай бұрын
That would be awesome but I am near Austin
@MustangsTrainsMowers Жыл бұрын
Walking through my local Fleet Farm in summer 2021 they had a sign for an NOS Murray sleeve hitch $50, no box. It was back in their warehouse. I bought it and I’m saving it to adapt to one of my Toro 5xi tractors.
@MustangsTrainsMowers
Жыл бұрын
It was on a shelf for 20-25 years but all the paint looks fine like it was brand new.
@jerrymartin4693 Жыл бұрын
You will learn but next time use a face shield when grinding it will save your eyes
@freakinowned4 ай бұрын
Those brackets that you couldn’t get to line up you need to swap. The bent part in should stick out
@chriscornett314410 ай бұрын
Word of advice.. weld outside.. so you don’t burn the house down
@MikeOrazzi22 күн бұрын
Is it better to assemble the hitch on the tractor or put it together and then slip it on? My tractor is out of state, but the hitch just showed up in a box today.
@LSRWvlog
22 күн бұрын
I put it together first and slipped it on
@MikeOrazzi
21 күн бұрын
@@LSRWvlog Thanks. I didn't get a chance to open the box yet, but maybe today.
@POLOAZTECA10 ай бұрын
Any updates on the final install?
@nevadabadger7925 Жыл бұрын
Reverse your welder polarity.
@LSRWvlog
Жыл бұрын
With this welder you cannot reverse the polarity, I need a little more heat and faster wire speed
@60Oldfart10 ай бұрын
you're wire speed is too slow.. speed it up a bit and adjust your amp higher..
@khrisyeet8022 Жыл бұрын
The only thing that got me fired up was you spent $200 on something that you had to modify. $200 you should have zero issues.
Пікірлер: 22
"I had to go run some errands. I bought a welder." Awesome. When I run errands to finish a project it's for 2 dollars worth of bolts or something similar.
I love how we all have to give disclaimers and apologize before we let people watch us try to weld LOL I feel your pain.
@LSRWvlog
Жыл бұрын
We have to, the keyboard warriors always have their 2 cents to throw in haha
Grinder and paint makes me the welder i aint. Just lay a thick bead in a circular motion. Should become a rhythm. On those mig welders, turning up wire speed helps sometimes. Take a little bit to learn. Good luck! Nice video.
everyone who has welded has had a first time this is the kind of stuff you can practice on and it doesn't matter that much if it works great if it breaks do it again. part of the problem is it is a flux core welder.
Greetings from Reno, Nevada. I appreciate the fast unboxing.
Practice makes perfect ❤
Lol....its how i learned how to weld...i took some classes later on then If you live near okc, ill have yah come by and i will help yah
@LSRWvlog
2 ай бұрын
That would be awesome but I am near Austin
Walking through my local Fleet Farm in summer 2021 they had a sign for an NOS Murray sleeve hitch $50, no box. It was back in their warehouse. I bought it and I’m saving it to adapt to one of my Toro 5xi tractors.
@MustangsTrainsMowers
Жыл бұрын
It was on a shelf for 20-25 years but all the paint looks fine like it was brand new.
You will learn but next time use a face shield when grinding it will save your eyes
Those brackets that you couldn’t get to line up you need to swap. The bent part in should stick out
Word of advice.. weld outside.. so you don’t burn the house down
Is it better to assemble the hitch on the tractor or put it together and then slip it on? My tractor is out of state, but the hitch just showed up in a box today.
@LSRWvlog
22 күн бұрын
I put it together first and slipped it on
@MikeOrazzi
21 күн бұрын
@@LSRWvlog Thanks. I didn't get a chance to open the box yet, but maybe today.
Any updates on the final install?
Reverse your welder polarity.
@LSRWvlog
Жыл бұрын
With this welder you cannot reverse the polarity, I need a little more heat and faster wire speed
you're wire speed is too slow.. speed it up a bit and adjust your amp higher..
The only thing that got me fired up was you spent $200 on something that you had to modify. $200 you should have zero issues.