Пікірлер

• 
  @sbcns5 сағат бұрын

  Thanks for this video. Considering buying this. How's is she holding up so far?

• 
  @Vehiclesupportedtravel5 сағат бұрын

  So far I like the quality I haven’t gotten to camp in yet it’s been to hot

• 
  @sbcns5 сағат бұрын

  @@Vehiclesupportedtravel got it. When you get to use it, would you mind measuring the dimension of the sleeping area? Wanted to see if it matches the description in Amazon. Thanks in advance sir. 🙏🏽🙏🏽🙏🏽

• 
  @Vehiclesupportedtravel4 сағат бұрын

  Yes I actually have the dimensions from when I was looking at upgrading the mattress the length is 78” front to back and there’s two widths towards the back it’s wider and gets narrower towards the the front so the wide part is 57 and 1/2 wide and the narrower part is 44 and 1/2

• 
  @happy_hartshornes12 күн бұрын

  Hell yes! I love Jameson!

• 
  @happy_hartshornes12 күн бұрын

  Set those logs down instead of upright and split them.

• 
  @happy_hartshornes12 күн бұрын

  Cool video man. I subscribed. Florida here. Don’t do a lot of car camping.

• 
  @dhmoss7515 күн бұрын

  Where is Jim Smola located?

• 
  @Vehiclesupportedtravel15 күн бұрын

  South Carolina

• 
  @dhmoss7515 күн бұрын

  @@Vehiclesupportedtravelfound him, thanks!

• 
  @jmenterprise376428 күн бұрын

  Thing looks bad ass!!🍻🍻🍻

• 
  @gonzalez780529 күн бұрын

  Try to aim the lights out to the side a bit , could fix the hood reflection..

• 
  @Ten.drilsTheYoutuberАй бұрын

  Sooo cool

• 
  @matthuffman8418Ай бұрын

  These are what im going with. What brand is your front bumper? Looks real good!

• 
  @VehiclesupportedtravelАй бұрын

  Thanks! It’s a poison spyder bumper

• 
  @matthuffman841819 күн бұрын

  Thanks! I'm doing the wiring right now

• 
  @overlanddriven6346Ай бұрын

  Could you please recommend a switch pod on the grab handle that is compatible with the low and high settings of these lights? I currently have the RC 6, and I understand that it is not suitable. I would appreciate your guidance in finding a better alternative that works effectively. Thank you for your assistance.

• 
  @VehiclesupportedtravelАй бұрын

  The switch panel I have is called voswitch it should be available on Amazon

• 
  @willng34Ай бұрын

  Great review and install video. Looks really nice for the price. Can both low and high beams be on at the same time?

• 
  @VehiclesupportedtravelАй бұрын

  Thank you! Yes when you turn on high beam it turns all the lights on at the same time. Only the low beam when on is 2 of the lights and is the flood pattern

• 
  @jasonoh5489Ай бұрын

  Think it will sleep two adults and one 5 year old?

• 
  @VehiclesupportedtravelАй бұрын

  Probably not it’s pretty small I would think 2 adults max

• 
  @jasonoh5489Ай бұрын

  @@Vehiclesupportedtravel thanks for the response. Wish I saw this video last week lol I ordered one last Thursday.

• 
  @Overland_ATLАй бұрын

  Matches well and I like the texture too! Let’s set up a 1 nighter!

• 
  @exsixАй бұрын

  toyota tech here ... there is a trick to walk out the upper control arm ... i just use my fingers to walk them off . never needed to bend any metal just move the harness out of the way a little

• 
  @gerard0l6569Ай бұрын

  They look dull

• 
  @VehiclesupportedtravelАй бұрын

  Not sure what that means

• 
  @gerard0l6569Ай бұрын

  @@Vehiclesupportedtravel when you turned them on they looked dull, not bright.

• 
  @VehiclesupportedtravelАй бұрын

  @@gerard0l6569 maybe just the camera but they are very bright!

• 
  @gerard0l6569Ай бұрын

  @@Vehiclesupportedtravel very possible

• 
  @JoseSalazar-bw7ohАй бұрын

  Nice review. Did you wired through the voswitch or separate?

• 
  @VehiclesupportedtravelАй бұрын

  I went through the Voswitch for the actual switching but I ran the power wire directly to the battery

• 
  @jmenterprise3764Ай бұрын

  🙌🙌🙌🙌🔥🔥🥃🥃🥃🍻🍻🍻

• 
  @mikemcdaniel1910Ай бұрын

  Just put a set on my xj. The backlight has the most natural amber I have seen yet. It really mimics the oem amber marker lights. And they are very bright. For the price and size, definitely a great way to go

• 
  @vegasxventuresАй бұрын

  Don’t sell the gator… 👀 trade for my bright white diesel? 😂

• 
  @VehiclesupportedtravelАй бұрын

  lol I’ll probably be keeping it I love the Gator color!

• 
  @vegasxventuresАй бұрын

  @@Vehiclesupportedtravel honestly man… trade in is probably low to mid 30’s at this point. I love mine too much to move on. It just keeps chugging.

• 
  @VehiclesupportedtravelАй бұрын

  @@vegasxventures exactly I love trying different setups but just not worth it right now plus it’s built out already and can go most places

• 
  @vegasxventuresАй бұрын

  Just picked up a set for my dad’s XJ. I’ve already got $1,000 in BD lights on my JT so I guess I’ll have to splurge on the BD LP4’s or LP6’s. Too bad these came out just recently. Love the gator JT, I held out for a diesel and ended up not being able to get one.

• 
  @papakormitАй бұрын

  Nice! 👍

• 
  @inthecaveperspective4527Ай бұрын

  I would be more concerned about the frame rust than anything surface wise

• 
  @SunShyne_CultureАй бұрын

  Wow that was close with the spacer issue. Glad there was no injuries. I run spacers on my 06 too. I recently added a second main leaf (minus the eyes) and thinking which shocks absorbers to use all round now. Hence me watching your build. You did a great job ❤

• 
  @soundjockyАй бұрын

  I could use your help.... You did such a great job with this video I’m trying to follow your lead for my Jeep. I purchased the same Harbor Freight items, however I’m not sure how to connect the wiring harness to my VOSwitch. When you cut the switch off the wiring harness, you have 5 wires (#1 RED, #2 RED/BLK, #7 BLK, #5 WHT and #6 WHT/BLK). Can you share the color wire configurations you use for each of the VOSwitch relays to control the Flood and the Spot. I see the VOSwitch has two wire connections per relay with one being the ground. I called Harbor Freight Support…but they didn’t know. Thank you in advance for your help! This will be my first real Mod for my jeep, and I want to thank you for the inspiration.

• 
  @VehiclesupportedtravelАй бұрын

  I’ll take a look later today and let you know which wires I wired where

• 
  @soundjockyАй бұрын

  @@Vehiclesupportedtravel Thank you!

• 
  @soundjockyАй бұрын

  @@Vehiclesupportedtravel Just checking back, did you have a chance to check and share your wiring harness to VoSwitch connections? Again, I appricate the support.

• 
  @VehiclesupportedtravelАй бұрын

  @@soundjocky ok looking at it now since I ran the main power and ground straight to the battery I just ran the power for low beam solid red to my switch one and the power for high beam white and black to switch two. The other wires i just taped off. I guess you can run the grounds to the switch also but not needed. Since the power is connected direct to the battery the switch is just completing the circuit to turn the lights on off that’s why you only need to wires going into the vosswitch

• 
  @soundjockyАй бұрын

  @@Vehiclesupportedtravel Thank you. Just to confirm. VOswitch Aux 1 (Low Beam) 1 Red wire (+ terminal) Only. Aux 2 (High beam) White/black striped (+ terminal) Only. All other wires taped off and did not use. Do I have that correct? I appricate you taking the time to walk me through this...

• 
  @Fifteen52WheelsАй бұрын

  Excellent choice! 😉 Welcome to the #52family Good to hear the feedback on the potential annoyance of water puddling in the rock ring.

• 
  @VehiclesupportedtravelАй бұрын

  Thanks! I’m loving them so far!

• 
  @danoverland4996Ай бұрын

  Those wheels look great on your color jeep!

• 
  @jmenterprise3764Ай бұрын

  Machine is coming out great dude cheers 🍻🍻🍻

• 
  @papakormit2 ай бұрын

  The video is good and I subscribed. Gladiator is a tourist's dream. Unfortunately I can’t afford it, it’s very expensive. Greetings from Russia Far East.

• 
  @pjfan1732 ай бұрын

  Both wheels look great. I just bought a 2023 Gladiator Rubicon and had an AEV 2” leveling kit installed. As for wheels and tires. I’m going with Yoko X-AT 25-12.50R17 and the Fuel Cycle in black.

• 
  @FiveBoroNative2 ай бұрын

  Very VERY helpful video. I was trying to decide between these and the Roadshock 6s, but these seem like more than enough...!

• 
  @Vehiclesupportedtravel2 ай бұрын

  Yes the light output is very good on these!

• 
  @noelorea956822 күн бұрын

  @@Vehiclesupportedtravelare they legal for driving? Or strictly off-road only

• 
  @michaelpatton84272 ай бұрын

  Great vid, get some fluid film and spray it on your frame. Also you could try deflating a basketball or football and then inflate it to push that dent out.

• 
  @its_me_voltron63942 ай бұрын

  I go to h t and I never see this sh....

• 
  @gerrypalomo12 ай бұрын

  $100 is not budget.

• 
  @Vehiclesupportedtravel2 ай бұрын

  Yes they are budget not cheap

• 
  @jayare8952 ай бұрын

  Cheap ass. Up your game or get out 😂

• 
  @andrewskaterrrАй бұрын

  If that’s not budget, then you’re too poor to own a car.

• 
  @aaronlearn7688Ай бұрын

  Considering my ditch lights were $400 I’d say they are budget

• 
  @gonzalez780529 күн бұрын

  It really depends on the performance and durability, a less expensive light that only last one winter would not make my budget list ... Now a $100 light that competes with lights 3 or 4 times the price ... Sounds like a sweet deal to me...

• 
  @braddopp59032 ай бұрын

  Did you do the big brake upgrade from the gx460’s if not what calipers are those? Stock rotor and caliper size?

• 
  @Vehiclesupportedtravel2 ай бұрын

  I didn’t I wish I had researched more before I did the breaks but I did them first thing. They are stock size rotors and calipers from powerstop

• 
  @olered77602 ай бұрын

  They hold up i think it’s money well spent

• 
  @jk_wrangler132 ай бұрын

  I've heard that if you leave the slives on your shocks, then water can get in there and cause rust.

• 
  @Vehiclesupportedtravel2 ай бұрын

  I guess that could happen I may just check them every once in a while to see if

• 
  @maddhatter40772 ай бұрын

  What Amp fuse did you wire them to? Both the lights and the amber backlight.

• 
  @Vehiclesupportedtravel2 ай бұрын

  I used the fuse that came with the wiring harness I think it’s a 20 amp fuse

• 
  @maddhatter40772 ай бұрын

  Thanks

• 
  @UncleFjester2 ай бұрын

  *How important is it to light up the top of the hood? How dark could it of been?* 🤣🤣 *That has to be the worst place to add additional lights.*

• 
  @mikewalker75512 ай бұрын

  So I bought the 6-in put them on my tundra. I love them. I do hate the inner side light. Don't know how to lock that off. How are you going to do yours?

• 
  @Vehiclesupportedtravel2 ай бұрын

  I’m thinking maybe just a piece of black tape for now

• 
  @mikewalker75512 ай бұрын

  I was thinking a sticker. Just wasn't sure how to do it. Thanks for responding but I definitely am happy with the lights for the price

• 
  @BlazingFaith194512 күн бұрын

  Another video comment said black vinyl tape works great

• 
  @RolexDSSD2 ай бұрын

  Solid

• 
  @mattbrew112 ай бұрын

  I was gonna buy these but then found the Nacho lights and went with them. I like that voswitch you have but it appears they’ve discontinued that type

• 
  @r35tmanbash2 ай бұрын

  Thanks for the review. I wish they had a 7".

• 
  @Vehiclesupportedtravel2 ай бұрын

  They make a 6 light version that's a little larger

• 
  @jmenterprise37642 ай бұрын

  Can't wait to see the progress 🔥🔥💪💪💪

• 
  @danoverland49962 ай бұрын

  Great video cant wait to see the new wheels and tires

• 
  @JERRYR7082 ай бұрын

  Do you need to wire brush the rusty areas before coating them?

• 
  @Vehiclesupportedtravel2 ай бұрын

  Yes

• 
  @joseceja89082 ай бұрын

  What was the price on the spindles?

• 
  @Vehiclesupportedtravel2 ай бұрын

  I believe I paid $600 for them installed

• 
  @lespaulguitarist922 ай бұрын

  So you don't need to adjust the dobinsons for ride height?

• 
  @Vehiclesupportedtravel2 ай бұрын

  I bought them already set from exitoffroad but you can adjust them if needed

• 
  @haydenbierig89972 ай бұрын

  So when you were showing the old rear axle I saw an FPL bag. Do you work for FPL?

• 
  @Vehiclesupportedtravel2 ай бұрын

  I don’t but my dad did for like 40 years

• 
  @joshuaware33042 ай бұрын

  So you did the spindle gussets. How does that affext the brake line braket that originally attaches to the spindle? I want to do the same the same upgrade but nobody seems to talk about what they had to do for the hardline to fit bacl properly, or what they had to do to the braket on the spindle to make it work.

• 
  @Vehiclesupportedtravel2 ай бұрын

  I didn’t do the gussets myself but when we installed the spindles back I believe we just zip tied the lines I don’t think we had to change anything with the hard lines

• 
  @adventureoverland19602 ай бұрын

  Great job. Love exploring that area. Thanks for sharing.