Пікірлер

• 
  @pete192711 сағат бұрын

  Did you ever do part 3?

• 
  @williamfarr19689 күн бұрын

  Of course you can bend it easily at the right temperature but as it cools it becomes soo much less malliable , so you gotta be quick. Red hot is good. White hot is too much as it becomes plastic and begins melting.

• 
  @OfficialBlackLabelArtists15 күн бұрын

  Not stupid at all.🎉

• 
  @rikityrik15 күн бұрын

  That’s something else! Great job, man. Looks fantastic.

• 
  @edweirdmassey2 ай бұрын

  Looks great. I would never have thought to use a forge as a heat source for bending. Kudos.

• 
  @fsj1978112 ай бұрын

  I stumbled upon your channel looking for how to form acrylic. Nice video, thanks for sharing.

• 
  @WillPOnya3 ай бұрын

  It's a nice multi-lock system but it's only to keep honest people out.

• 
  @JamesEmeryHill4 ай бұрын

  This way, you know who left the gate open...

• 
  @adlerarmory83824 ай бұрын

  Using Milwaukee SwitchBlade as a Shell Mill in wood...Brilliant! I was brought here while researching using wood die to press aluminum. Trying to recreate an aluminum pressed retainer for Humvee armored windshield laminate glass. Before I went on active duty I worked as apprentice in a machine shop, Fred Schindler, an old school Tool & Die Maker, taught me the trade basics. He said they used high density wood for small or single parts run. He said the old solid oak exterior doors made good material for prototyping, One-Of, etc.

• 
  @itsnot_stupid_ifitworks4 ай бұрын

  I done some other shapes since. Now I make the wood form slightly over size and stamp a piece of sheet zinc. Then laminate the zinc to the wood so the die lasts much longer

• 
  @sharkbaitsurfer4 ай бұрын

  As much as anything I adore the narration AND you got a result, an excellent result in fact - congratulations. Subscription worthy

• 
  @itsnot_stupid_ifitworks4 ай бұрын

  Why thank you

• 
  @samsungtv4u6 ай бұрын

  I want to do the same thing not looking forward to it. Maybe I could buy some brass from you if you still have it

• 
  @itsnot_stupid_ifitworks6 ай бұрын

  I have some 1 inch dia brass . Where are you located?

• 
  @samsungtv4u6 ай бұрын

  @@itsnot_stupid_ifitworks Santa Rosa CA.

• 
  @itsnot_stupid_ifitworks6 ай бұрын

  Let me know what size pieces you need and I can calculate total cost and shipping

• 
  @samsungtv4u5 ай бұрын

  @@itsnot_stupid_ifitworks I wanded to build a set of modern rustic " concrete cowbell weights with brass handles. Not sure what length I would need because I'mnot exactly sure what would be the easiest way to bend it. I was thinking maybe use induction and a 20,000 lb press. A u about 5 inches wide by 7 inches down so 20 inches for each cowbell I guess not sure how much I should add for the bent radius.

• 
  @MMSound-zl4eo7 ай бұрын

  провода подключения компонентов никуда не годятся .нужно сделать из микрофонного провода межблочные провода.

• 
  @darty3677 ай бұрын

  Hi, can you explain how do you apply the veneer for the cabinet at the end of the video ? Do you use contact adhesive, a vacuum bag or another method ?

• 
  @itsnot_stupid_ifitworks6 ай бұрын

  Hi. Sorry just saw this. I used wood glue and strapped and clamped another curved piece of mdf on top

• 
  @ryankydd93488 ай бұрын

  Try insulating the box might help with the heat loss on the ends of the box

• 
  @raysplace65488 ай бұрын

  That's pretty damned cool.. Thanks for sharing..🍻🍻

• 
  @AmbiguousAdventurer9 ай бұрын

  That's a dumb solution. Because you can have just one lock and duplicate the keys for however many users...

• 
  @itsnot_stupid_ifitworks9 ай бұрын

  So when the cell tower repair tech go thru, the oil field crew goes thru and the neighbour going hunting go thru and the gate is left open buy someone and all the cattle leave ....who left it open

• 
  @stevebriant181110 ай бұрын

  Great idea! Could make additional angles to drop in if needing other than 45 deg.

• 
  @valentinflorin768010 ай бұрын

  Acces ,fiecare cu lacatu lui 😅

• 
  @milesgregorash183010 ай бұрын

  Hell of a way to see the math

• 
  @mikep982610 ай бұрын

  Nice!!

• 
  @user-sc5gj2yw5b10 ай бұрын

  We do the same thing in the world fields in Texas only we use the length of chain and hook a bunch of different locks together whenever it's your turn to go in the gate you unlock your lock and since it's basically a length of chain a length of chain open sesame

• 
  @slomotion516510 ай бұрын

  That's alot of people with access to one place

• 
  @thecasualmfer917610 ай бұрын

  Does that cause any foaming in the oil?

• 
  @itsnot_stupid_ifitworks10 ай бұрын

  No...this little bit of movement of the oil is nothing like the action inside an engine that causes foamy oil

• 
  @MVGEN3610 ай бұрын

  it looks like you put all of your faith into that vacuum

• 
  @itsnot_stupid_ifitworks10 ай бұрын

  Imagine if the breaker trips lol

• 
  @davidkrueger309610 ай бұрын

  It's stupidity at its finest because all you have to do is cut one of these padlocks and the gate opens.

• 
  @itsnot_stupid_ifitworks10 ай бұрын

  Is there a farm gate that is impossible to cut open?

• 
  @davidkrueger309610 ай бұрын

  @@itsnot_stupid_ifitworks no there probably isn't but making something as stupid as this and spending a couple hundred on rocks is pretty ridiculous. And it's even more ridiculous that he couldn't seem to figure out that all you have to do is cut one lock and the gate will open. Next time just want some steel on there and put a Master Lock Puck lock on there like they do on the back of work vans to lock the doors from the outside. You can still pick that lock but you won't be able to cut it.

• 
  @littlehills7393 ай бұрын

  why would u cut a harden steel hasp --- when u cut the end of the low carbon / mild steel pin just below. stupidity at its finest going for the lock

• 
  @itsnot_stupid_ifitworks3 ай бұрын

  Is it possible there's a factor that you're not considering?

• 
  @Ch33ssie10 ай бұрын

  I thought it was gonna be rocket

• 
  @jdodgebagpiper803610 ай бұрын

  I need some fire crackers for my shop now!!! Hell yeah!!!

• 
  @reigndrops409010 ай бұрын

  That was awesome 😂

• 
  @millertime4204610 ай бұрын

  I need to hear the whole parody of this,who made this it is so far gold.

• 
  @itsnot_stupid_ifitworks10 ай бұрын

  It's from There I Ruined It @ThereIRuinedIt...fun channel👍

• 
  @millertime4204610 ай бұрын

  @itsnot_stupid_ifitworks thank you, these videos made my day

• 
  @ad-scaff289710 ай бұрын

  Orrrrrr just 1 lock and everyone with access gets a key.

• 
  @itsnot_stupid_ifitworks10 ай бұрын

  Yawn

• 
  @c1hd74610 ай бұрын

  i want something like that but for guns

• 
  @skypigeon546210 ай бұрын

  1000 locks later hey guys

• 
  @itsnot_stupid_ifitworks10 ай бұрын

  It's one lock per person

• 
  @itsnot_stupid_ifitworks10 ай бұрын

  Go to @dettmore101 on KZread or Instagram if you want to purchase one and get on the waiting list 👍

• 
  @invisible_sniper10 ай бұрын

  About as awesome as it gets 👍🏻

• 
  @dipinmylip117110 ай бұрын

  Stupid.

• 
  @Khichuri_n_gosht10 ай бұрын

  That’s not just a smart move-it’s a *boss* move

• 
  @WillPOnya3 ай бұрын

  It's a nice multi-lock system but it's only to keep honest people out.

• 
  @Bart_Depestele Жыл бұрын

  Nice job amigo

• 
  @guglielmodicarlo4139 Жыл бұрын

  although you do a great job, this video does the average do it yourselfer no good whatsoever

• 
  @itsnot_stupid_ifitworks Жыл бұрын

  Heat source and a form

• 
  @fabiosouza5906 Жыл бұрын

  Mr. Row are you selling the rack you built, I would love to purchase one if your are selling, also be very interested in the tray you made along with the face handles. Thank you Sr

• 
  @snowman333- Жыл бұрын

  too bad, you could make the threaded hole in the Tee to accept the 1/4 pipe nipple from the valve, thread the inside of the 1/4 pipe for 1/8 npt then bushing that down to 1/16 npt for your orifice (mig tip). This allows for changing the orifice for potential future uses. This could allow more efficient use of your fuel in the different configurations. OR just make multiple burners.

• 
  @aaronschmuker6925 Жыл бұрын

  Where do you get a solid brass brush wheel? Every one I find seems to be brass coated!

• 
  @itsnot_stupid_ifitworks Жыл бұрын

  hmmm...i will have to look and get back to you

• 
  @itsnot_stupid_ifitworks Жыл бұрын

  Ordered it from McMaster Carr. Product #48955A78

• 
  @Gokhan_B Жыл бұрын

  Hello, can you help me if possible about components hook setup? I have SA7800 + SG9800 + TX9800 + CTF900 + SR303 and RG2. if possible can you help me; how can I connect these? Thank you very much.

• 
  @itsnot_stupid_ifitworks Жыл бұрын

  i would suggest looking for a pioneer manual online. they have hook up instructions

• 
  @NMETSGChan Жыл бұрын

  WTF? This video is Titled bending Acrylic on Curved MDF Form! NOT BENDING MDF!

• 
  @itsnot_stupid_ifitworks Жыл бұрын

  MR ALL CAPS apparently you didn't listen to the first two sentences, see the link in the description, see the link in the very first comment above or the link in the video ffs

• 
  @NMETSGChan Жыл бұрын

  @@itsnot_stupid_ifitworks Attracting people with misleading title doesn’t make it right!

• 
  @itsnot_stupid_ifitworks Жыл бұрын

  I'm considering changing the title to "You are a Moron" . What do you think?

• 
  @drscruggs9830 Жыл бұрын

  why not just buy or get a sickle bar attachment for the machine.....the mower idea is rediculas.

• 
  @itsnot_stupid_ifitworks Жыл бұрын

  Sickle bar attachment for a forklift....sure...sold everywhere

• 
  @alexilamoon409 Жыл бұрын

  Only modern panel saws are built with these features

• 
  @1waukesha Жыл бұрын

  All my grinders have their wrenches attached to the cords end. Then I don’t forget to unplug it as an added bonus if im feeling extra safety that day. 🤣

• 
  @jonlanier_ Жыл бұрын

  No, not all hand saws come like that.

• 
  @itsnot_stupid_ifitworks Жыл бұрын

  Ya.. i don't know why the first guys said that, because obviously they all don't..i'm the second guy.... guess i should've corrected it/him

• 
  @MrJeb707 Жыл бұрын

  you should go get one of those wrenches, throw it on the bench and try to use it the next couple times. I wonder if it would get used 😂

• 
  @jobrady2009 Жыл бұрын

  thank you

• 
  @baggins1 Жыл бұрын

  That backing music tho