Пікірлер

• 
  @KRIZINKGRINКүн бұрын

  Nice one my friend.

• 
  @skullfucker3381Күн бұрын

  This is my approach to textures and labels in Rhino but man its a pain in the az sometimes 😂

• 
  @shawncrocker70372 күн бұрын

  My problem currently is my geometry looks blocky. My texture size if 1.5 in and I bring the triangle size down to 0.01in and nothing really changes. I am using a baked texture from blender using the open exr file. Is that a good file to use?

• 
  @DuterqueStudio2 күн бұрын

  I don’t think the exr is the problem but maybe try with pnj. Also it can be the hight of your displacement maybe. When you say blocky you mean the texture displacement has some sort of steps?

• 
  @shawncrocker70372 күн бұрын

  @@DuterqueStudio sort of looks like the triangle size is too big. But also looks like the edges of the triangles are being smoothed over. So, it seems to look like low poly geometry with some smoothing which makes it more baffling to me what could be my problem. For context, I'm displacing a diamondplate pattern on aluminum material. Even one of the default Dimondplate key shot materials does this when I bring down the scale.

• 
  @DuterqueStudio23 сағат бұрын

  @@shawncrocker7037 can it be the scale of your object which is bigger when you imported it? Like one unit is 1meter instead of 1cm. And also is your object a closed mesh/polysurfce, if not keyshot my struggle understanding which direction the normal’s direction should be orientated

• 
  @KRIZINKGRIN5 күн бұрын

  Also i have a question is it possible on a Sub D object i tried but seems theres no way had to convert my Sub D to surface am still new to GH but its a must learn thanks again.

• 
  @DuterqueStudio4 күн бұрын

  You have to convert it into a surface with subD to nurbs, but you're likly to have a surface with lots of patchs, and this method of doing pattern only works on single surface. There are work around that but it really depends on the shape your trying to apply a pattern onto

• 
  @ivanmelnikovabramov21775 күн бұрын

  Finally someone is doing good tutorials for Rhino, great video, you got a new sub

• 
  @DuterqueStudio4 күн бұрын

  Thanks!

• 
  @aqeelahmed54847 күн бұрын

  Great tutorial. I want to know how do I make the point staggered or hexagon formation instead of UV square

• 
  @DuterqueStudio6 күн бұрын

  Thanks, yes was thinking of doing a video about it actually. A short answer is you can shift 1 row out of 2 by half the distance there is between points

• 
  @KRIZINKGRIN11 күн бұрын

  That is awesome keep up the great works and thanks.

• 
  @DuterqueStudio10 күн бұрын

  @@KRIZINKGRIN thanks!

• 
  @sidekick3rida18 күн бұрын

  does it export triangles or quads?

• 
  @DuterqueStudio17 күн бұрын

  @@sidekick3rida a bit of both.

• 
  @daveson3D23 күн бұрын

  how can I reset the scale inside blender once imported obj

• 
  @DuterqueStudio23 күн бұрын

  Ctrl A --> scale

• 
  @daveson3D23 күн бұрын

  @@DuterqueStudio thanks! Starting to learn blender this is very useful.

• 
  @cjacobs62728 күн бұрын

  Didn't work... everything is exploded...

• 
  @DuterqueStudio26 күн бұрын

  It could be that the welded is not toggle. Or that your polysurface is not join in rhino (sometimes it’s grouped and not joined)

• 
  @johnmanosalva2546Ай бұрын

  4 years using rhino , and never use this before, Thankss

• 
  @DuterqueStudio27 күн бұрын

  Glad it was helpfull 👍🏻

• 
  @jennythufu7676Ай бұрын

  smart tip!

• 
  @DuterqueStudioАй бұрын

  Thanks

• 
  @vinay0artsАй бұрын

  what's the material for buttons is it subsurface

• 
  @DuterqueStudioАй бұрын

  subsurface yes

• 
  @jorgenunez56512 ай бұрын

  Use command Copy/in place instead of Ctrl C + Ctrl V to save ram

• 
  @DuterqueStudio2 ай бұрын

  Yes, great tip 👍🏻

• 
  @postman_in_red2 ай бұрын

  this was very helpful. Thank you

• 
  @hinduspl3 ай бұрын

  How do you make that xyz arrows show when you select your object? To have that posiblities to move them by dragging ? I dint see that one in my rhino. 07:45 for example

• 
  @DuterqueStudio3 ай бұрын

  You need to click on “gumball” at the bottom of the window to toggle it(if you are on windows), and and at the top if you’re on mac

• 
  @jennythufu76763 ай бұрын

  Great tutorial, thank you for sharing

• 
  @DuterqueStudio3 ай бұрын

  Thanks

• 
  @GeoBuca3 ай бұрын

  Wow! excellent video. Please make more content of product animation in blender. Thank you!

• 
  @DuterqueStudio3 ай бұрын

  Thanks, any specific typology of product?

• 
  @GeoBuca3 ай бұрын

  @@DuterqueStudio It doesn't matter what type of product it is, but I am mainly interested in products with a more technological appearance. Even so, I am also interested in learning more about animation and lighting. thank you!.

• 
  @c.g.c20673 ай бұрын

  I would have generated the 3d curves by crossing the extrusion of each bidimensional curve rather than adjusting each point. Maybe I'm wrong.

• 
  @DuterqueStudio3 ай бұрын

  There are different ways to do, and I think yours would have probably worked too. The important is to find/use the workflow that allows you to achieve the result you are looking for

• 
  @tgs17663 ай бұрын

  Adding the color invert and then changing the displacement to negative cancel each other out. You need one or the other in this case, not both.

• 
  @martina53284 ай бұрын

  Project does not work. Flow along surface does not work. Hey, here is a suggestion - specify what is special about the surface of the medallion that makes all this work !

• 
  @martina53284 ай бұрын

  How about starting with showing how to put the text on a fking box or similar, so that the text does not "fall though" to the bottom, regardless of how you try to create a surface or whatever... Rhino is a bloated fking joke. Or the people making tutoprials are fking retared, or why the f is there no fking tutorial showing how to put simple text on a simple surface - there are houndreds showing how to do it on a curved surface. A SIMPLE TEXT ON A SIMPLE BOX THAT YOU CREATED IN RHINO. But no.... When the simplest thing becomes impossible - then you know that you have bloated software in front of you.

• 
  @martina53284 ай бұрын

  What a joke...

• 
  @martina53284 ай бұрын

  Since it is Rhino (i.e. no logic and nothing makes sense, and every move is a trick question), I would like to know the properties of the 3D circle that you start with. Doing the exact same thing with a box will not work. So there is something very specific, some very specific properties that the 3D circle has that you have left out. You cannot simply make a 3D box or 3D circle an repeat the procedure. (That would make too much sense)

• 
  @DuterqueStudio3 ай бұрын

  doing the exact same thing with a box will work, you probably missed a step

• 
  @martina53283 ай бұрын

  @@DuterqueStudio No , the text will fall through the surface if put on top of it. Rhino always places the text at the bottom. I wish you could arrange the order as layers, similar to photoshop. And projection gives the error message, - projection missed its target or similar. I did manage to project text on a curved surface following a clip on that - by creating a strip from the curved surface matching its length. Then turning that strip i to a surface. Put text on that surface, and project it back on to the curved surface. But I cannot create the same strip from an already flat surface with the same command. This software is bloated junk.

• 
  @billygraham55894 ай бұрын

  Volume too low, can't hear what you are saying.

• 
  @goktugmert4 ай бұрын

  Do you think modelling in rhino and rendering in blender is a good workflow or should i learn keyshot

• 
  @DuterqueStudio4 ай бұрын

  Modelling in rhino and rendering in blender is a great workflow. However it still worth learning keyshot as lots of design studios use keyshot

• 
  @goktugmert4 ай бұрын

  @@DuterqueStudio thank you for the answer. Your tutorials are awesome btw

• 
  @whothewho8221 күн бұрын

  @@DuterqueStudiohi! I am a student and don’t have money for Keyshot at the moment. Could I substitute Keyshot with Blender for now?

• 
  @DuterqueStudio21 күн бұрын

  @@whothewho82 Yes definitly, you'll be able to achieve the same level of render

• 
  @anontogazi15854 ай бұрын

  please create this in blender 3d

• 
  @user-sh3sv8wm1u4 ай бұрын

  parfaitement expliqué et démontré!

• 
  @iajhy4 ай бұрын

  Thank you so much! You have a new subscriber sir :)

• 
  @chrisgreenwell34044 ай бұрын

  Excellent , thank you :)

• 
  @hiepcongnguyen5 ай бұрын

  Great ❤

• 
  @caribbeanchild5 ай бұрын

  Do this again with jpg's with white backgrounds. It's not the same at all.

• 
  @caribbeanchild5 ай бұрын

  Thank you. Very helpfull but needs more volume. Next time listen to other videos then listen to your own. If I turn my speakers up to hear this propelry then the next video I watch is going to wake the entire house. KZread volume is flat out and windows volume is flat out.

• 
  @meganesouchet88565 ай бұрын

  Great tips as usual, thank you

• 
  @liquidvampz5 ай бұрын

  i think the video's audio is a bit low compared to your other vids! but thank you so much for this tutorial!

• 
  @ViktorAdriaansens5 ай бұрын

  this! if you''re putting any vid through editing software just slap on an audio compressor and check the levels

• 
  @DuterqueStudio5 ай бұрын

  Thanks for the feedback, yes I added a denoise without cranking up the volume afterwards…

• 
  @cast67545 ай бұрын

  I think Rino is so good! Can you model the electric kickboard in detail?

• 
  @DuterqueStudio5 ай бұрын

  Yes rhino is great, you can check one of my other video where I go step by step on how to model the tx in rhino

• 
  @ricbattaglia69765 ай бұрын

  Perfect, thanks! With rtx 4090?🇮🇹

• 
  @DuterqueStudio5 ай бұрын

  Rtx 3070

• 
  @ricbattaglia69765 ай бұрын

  V-ray seems not necessary.​@@DuterqueStudio

• 
  @isiclark58775 ай бұрын

  Incredible - thank you!

• 
  @meganesouchet62255 ай бұрын

  thank you for the tutorial, really easy to follow 👌

• 
  @giovannigaleano14215 ай бұрын

  Felicitaciones, excelente video.

• 
  @DuterqueStudio5 ай бұрын

  Merci 👍🏻

• 
  @jonahzehani5 ай бұрын

  Great video! Teenage Engeneering inspiration for the overall design ;)

• 
  @brahmananda196b5 ай бұрын

  You made it easy. Thanks. Looking forward to more videos

• 
  @martina53284 ай бұрын

  Yea, curved objects, there are houndreds of clips showing how to do this. But not how to add text to a simple box you just created in Rhino. The stupidity...

• 
  @chenafrita11776 ай бұрын

  how did you engrave the drawing ? do you have a video about it ? thanks

• 
  @DuterqueStudio6 ай бұрын

  Same way, you just need to have your drawing as closed curves, then you extrude it in the same way you extrude your text

• 
  @tatyanavervekina82626 ай бұрын

  I have a question, if I applied the distortion, I can not change it again. Is just not working anymore and has become a part of geometry, what have I done wrong and or is it a bug?

• 
  @DuterqueStudio5 ай бұрын

  Could be a bug, but try unplugging displacement, re updating the geometry and putting back the displacement, that might work

• 
  @bkjets20236 ай бұрын

  Awesome tutorial. Thank you!

• 
  @tatyanavervekina82627 ай бұрын

  That helps a lot! Thank you for your work!

• 
  @michelleestefaniacamposrey11787 ай бұрын

  Thanks a lot!!!! Youre a lifesaver

• 
  @tonynacho8 ай бұрын

  This is fantastic! Is the final model / Rhino project available to take a look at?

• 
  @cd72168 ай бұрын

  amazing 👍 subscribed ❤