Пікірлер

• 
  @DimazDMP4 сағат бұрын

  Sayang file nya berbayar.. Kalau bisa bagi file yang tidak berbayar

• 
  @zigabizjak9682Күн бұрын

  Where did you get big drone?

• 
  @Toasty24076Күн бұрын

  Been following the build for a while still amazes me to see it

• 
  @MrTjorkКүн бұрын

  нихрена нового, абсолютно

• 
  @GagePenselin-ji6sh5 күн бұрын

  I think 7 spoke wheels would look sick! Anyway keep up the great work!

• 
  @joaonazario37645 күн бұрын

  Stl files are too expensive due to monetary conversion, is there something to do about it?

• 
  @scaleaddictionКүн бұрын

  Sorry about that, it's not my file

• 
  @youknoweverything76435 күн бұрын

  Finally somebody puts these little motors to good use and actual RC car not just a running stand this is awesome build

• 
  @stephharney89646 күн бұрын

  Cool dude😮

• 
  @tynabrenner62037 күн бұрын

  nice work , whats the paint used for the silver base coat

• 
  @JoseChavez-rd2yy8 күн бұрын

  Would like to know if you are going to be able to sell one of your cars

• 
  @faaadlee8 күн бұрын

  bang mentahan part 14 bang. kirim ke wa aja

• 
  @mirandahotspring40199 күн бұрын

  Those engines can be a problem, they flood really easily.

• 
  @bjhbjhbjhweeee9 күн бұрын

  This is the most advanced and physically close to reality project with scale engines. I'm looking forward to the day of the shakedown. To be honest, it would be cool to run on a track long enough.

• 
  @NBC_NCO10 күн бұрын

  Recommendation... After you are done building the body, I would make a silicone mold of it. Then, I would fill the silicone mold with plaster of Paris to make a "solid block form" of your car. The solid block will now become a mold for vacuum forming a lightweight lexan body that you could sell to people like me and others.

• 
  @7badtothebone6 күн бұрын

  I’ve always wanted to go forth with this but I am unfamiliar with forming lexan/vacuum form. Is it a simpler than I think

• 
  @piotrzas424810 күн бұрын

  I suggest learning how to design in Blender. You can then create your own better combination of parts.

• 
  @scaleaddiction10 күн бұрын

  Yes, you are right

• 
  @curtisnewton89510 күн бұрын

  nice I also want to add that engine in my RC car

• 
  @scaleaddiction10 күн бұрын

  It's really fun

• 
  @heuerspitstop10 күн бұрын

  Nice 3D Print man, I subscribe 🙂

• 
  @scaleaddiction10 күн бұрын

  Thanks for the sub!

• 
  @UnreasonablyIrrelevant-gv8xx10 күн бұрын

  Don't stress having problems with the engine. Trust me, its not your fault. These things always have issues Edit: I think we're all thinking the same thing for when this is done. Body kit 😏

• 
  @scaleaddiction10 күн бұрын

  Thanks man, for sure 🙏🙏🙏

• 
  @UnreasonablyIrrelevant-gv8xx9 күн бұрын

  No problem

• 
  @davestir574311 күн бұрын

  To make those short filaments straighter, you can heat up your bed, then roll them under your finger until they straighten out. Makes it easier to slide both parts together if those are fairly straight.

• 
  @scaleaddiction10 күн бұрын

  That's a great tip, next time

• 
  @Theboyz-sh5ui11 күн бұрын

  Nice

• 
  @scaleaddiction10 күн бұрын

  Thanks

• 
  @ajahniepemberton186011 күн бұрын

  ali can you please update the cults3d links for the supra Its been months since its been touched so the links are inaccurate and also not up to date please fix this like acutally fix it and not just say "Sure, I will look at them today" and blow me off

• 
  @scaleaddiction10 күн бұрын

  I did last time and all where working. Accept the caliper were out of stock, which link not working for you ?

• 
  @ajahniepemberton18609 күн бұрын

  @@scaleaddiction the link for the Arduino is still in there, even though it was never utilized the link for the beans was wrong. I got the size of rice greens and the link for the three speed gearbox is not there among other things. The links have not been updated in two months, so it’s no longer up-to-date with the videos which is my main issue

• 
  @fungalcoffee11 күн бұрын

  Is their any concern over the heat produced by the engine? I can't imagine 3D prints being happy near it

• 
  @anonrider887011 күн бұрын

  that's why I duilt this electric, and it already runs

• 
  @scaleaddiction10 күн бұрын

  Of course it won't hold that heat, bit I have carbon fiber filament and print the chassis, otherwise I will send it to pcbway which is sponsored for this project to print me with heat resistant material, but till I make everything sure then I send them the file

• 
  @neidivan129511 күн бұрын

  Legal top de mais 😲😃😍🤩😍👏🏼👏🏼👏🏼👏🏼👍🏾👏🏼

• 
  @scaleaddiction10 күн бұрын

  🙏🙏

• 
  @Jandrix11YT11 күн бұрын

  literally, all the video was just for build the trunk bro, make more longer videos

• 
  @Bianedden11 күн бұрын

  Looks like you don't know how much work process goes in when you make something from scratch, it always looks easier when you see edited video, but he doesn't show all the failed prints, tests, measuring, designing

• 
  @Jandrix11YT11 күн бұрын

  @@Bianedden ok, fine, but i'm just saying that i prefer wait some days and watch a longer video with more content

• 
  @gerardadoga352611 күн бұрын

  i literally just discovered your channel pretty cool stuff.

• 
  @scaleaddiction11 күн бұрын

  Thanks, welcome on board, glad you like my work

• 
  @jellyman14011 күн бұрын

  Always get so excited by these videos! Can't wait to see this thing driving! Roughly how much do you expect it to cost when it's done?

• 
  @scaleaddiction11 күн бұрын

  I really don't know for now, maybe after I finish everything, I think it will be under $1000 with all the wasted test prints

• 
  @jellyman14011 күн бұрын

  @@scaleaddiction wow, that's really not bad at all, considering those engines cost a few hundred! Once it's done I may have to make one myself, love it!

• 
  @wutangclams993612 күн бұрын

  HELL YEAH

• 
  @scaleaddiction11 күн бұрын

  Thanks

• 
  @lisalohand475312 күн бұрын

  👍👍

• 
  @scaleaddiction11 күн бұрын

  🙏

• 
  @huguesJojo12 күн бұрын

  Make it twin turbo

• 
  @scaleaddiction12 күн бұрын

  That's great idea bro 😅

• 
  @GeorgeChukwu-om2pe12 күн бұрын

  Nice work bro

• 
  @scaleaddiction12 күн бұрын

  Thanks 🔥

• 
  @bonganihalimani957212 күн бұрын

  3rd comment yay

• 
  @scaleaddiction12 күн бұрын

  🙏

• 
  @I_Like_White12 күн бұрын

  Second comment yay

• 
  @scaleaddiction12 күн бұрын

  🙏🙏

• 
  @LeoManz12 күн бұрын

  First comment yay

• 
  @scaleaddiction12 күн бұрын

  🙏🙏

• 
  @icee75312 күн бұрын

  What printer are you using?

• 
  @scaleaddiction12 күн бұрын

  I used ender 3 for that I think 🤔

• 
  @ChevyboySS7913 күн бұрын

  Wow! What color are you gonna paint the body?

• 
  @scaleaddiction12 күн бұрын

  red

• 
  @johnwagner506114 күн бұрын

  Total cost in materials and parts?

• 
  @scaleaddiction12 күн бұрын

  not sure exactly, but i think $1000 with all the test prints

• 
  @Ghostworks99916 күн бұрын

  I tried finding those disk breaks on Ali express like you said but I haven’t been able to find anything

• 
  @lannyfloyd613120 күн бұрын

  What printer do you use?

• 
  @scaleaddiction10 күн бұрын

  Creality Ender 3, cr10 max and have bambulab lap now too

• 
  @bjhbjhbjhweeee21 күн бұрын

  im... im just cryin. imagine come true !!!

• 
  @kaifdon713021 күн бұрын

  Where is next video

• 
  @scaleaddiction21 күн бұрын

  kzread.info/dash/bejne/Y6Rt09aKqMLQYaQ.html

• 
  @bjhbjhbjhweeee23 күн бұрын

  I'm waiting with my wallet

• 
  @scaleaddiction10 күн бұрын

  🙏🙏

• 
  @ABG_3D24 күн бұрын

  Well done Ali ! Can I ask a favor, will you kindly make a video going through how you model the shell step by step. I would love to see your process of designing and think it will also make great content

• 
  @scaleaddiction10 күн бұрын

  Sure man, I love to show you all how I do, one day hopefully

• 
  @slakjawnotsayin545125 күн бұрын

  AWESOME MAN!!! I finally got my 1/32 scale Nascar slotcar body to print properly and beautifully, from following this video, and making a couple of tweaks to the settings because the newer version of Cura is a bit different now. Now I just have to adjust the thickness of them to about half of 1.2mm, because that's too think for slot cars or even models of that size. Well, for models it doesn't really matter, as they are fine if they weigh a bit more... I was also using Blender, and had problems with the models after bringing them into Cura, so another video helped me fix those issues easily by grabbing 3D Builder from MS for free, which when you bring the STL in, it tells you there are problems and it auto fixes them with the click of a button. The only downfall was, it's auto fix also created a bottom to the body, but there was a simple "Hollow" button as well that then asks how thick you want your walls, which is where I assumed 1.2mm, but that's best for larger scale RC cars than it is for 1/32 scale slot cars. Oh well, trial and error... Thanks again for the awesome videos and going over your Cura settings here, it's helped me immensely!!!

• 
  @slakjawnotsayin545125 күн бұрын

  I use wood filler on 3d prints sometimes. Not sure if that would be cheaper than body filler or not, but it's an option. Could probably use any glue that's sandable though I guess. Great video man!

• 
  @kelvisvalbuena708825 күн бұрын

  Muy bueno su vídeo , sigue adelante que tienes potencial, ya me suscribí ya hice mi parte para que sigas amigo muy buen contenido, saludos desde Venezuela me llamo kelvis Valbuena vivo en Maracaibo Venezuela 👍🇻🇪

• 
  @scaleaddiction10 күн бұрын

  Gracias por ver

• 
  @sweetirtaza-sd6vo26 күн бұрын

  Is that a supra ratatatatata

• 
  @slakjawnotsayin545127 күн бұрын

  Would this work for 24 or 32 scale bodies as well, or would they be too small for this style of printing? I've seen the smaller ones printed with resin printers, but none with filament printers like you are doing unfortunately. Not much on the YTube discussing them either, so I was hoping you would have some experience and knowledge about this? Also, thank you for the videos, they are AWESOME!!!

• 
  @diyfireking27 күн бұрын

  Very nice mate and technique, u did it well 👍👍

• 
  @scaleaddiction10 күн бұрын

  Thank you! Cheers!

• 
  @first927928 күн бұрын

  Do you actually do aero optimisation for stuff like your supra? because I think that would be really interesting.

• 
  @brwed28 күн бұрын

  i doubt it i think his main focus is to just make the thing drive and drive good and reliably because you know its 3d printed and its also supposed to look like a supra i hope he does do something like that though id love to see a body made from him thats super short and long like a dragster made for going fast

• 
  @slsamg_5thscale28 күн бұрын

  Cool build! I personally apply Epoxy on the 3d prints so that the layers are even less visible. On the other hand it is much harder to sand down later.