this is the coolest rc project on youtube right now 👀🤯

This is the most comprehensive RC car tutorial, I have found yet. Thanks!!!!

@scaleaddiction

3 ай бұрын

Glad you like it!

Keep it up. You are one man Army doing great job ❤

@scaleaddiction

4 ай бұрын

Thanks man, appreciate that

I can't wait to see her first ride!

Well done Ali, been keeping an eye on this and the progress on this build has been out of this world. Keep it up

@scaleaddiction

4 ай бұрын

Thanks, will do!

That is coming out awesome. It’s gonna be amazing. 👍 Thanks for sharing.

I just discovered your channel.. holy cow this is an amazing project! I can't wait to see it finished!

@scaleaddiction

4 ай бұрын

Welcome aboard! Thanks for watching, can't wait to run it soon

Yo this is soo frickin cool! And highly detailed good work man people are so talented

Congratulations man it was really good

👍🏾👍🏾👍🏾👍🏾👍🏾 I finally found videos of someone doing what I’ve been dreaming about for a couple of years. From photogrammetry to 3D print. My model should be ~ 805mm long (31.7 inches), radically custom, non-functioning engine, unconventional suspension and unorthodox exhaust manifold. Researching CAD and modeling on iPad and Corexy printers.

@mobdev9195

4 ай бұрын

Same bro

@mobdev9195

4 ай бұрын

But mine is a motorcycle

@adam-jayar

4 ай бұрын

Are you guys in university or is this a hobby for you?

@Retrograde99

4 ай бұрын

I am making a direct drive RC car but i REALLY want the kenblock pigasus porsche 912 body shell for it. It needs to be 1/7 scale but i don't know how i could do that

@califuturist

4 ай бұрын

@@mobdev9195 👍🏾👍🏾👍🏾👍🏾👍🏾

Looks awesome Ali!

@scaleaddiction

4 ай бұрын

Thanks for watching

❤ the vids and ❤ the supra! Soo cool!❤

@scaleaddiction

4 ай бұрын

Thanks

I just subscribed love the work man this is so epic

@scaleaddiction

4 ай бұрын

Thanks

Great video and very informative.

@scaleaddiction

4 ай бұрын

Glad it was helpful!

Super dope I would definitely like to do this. Great job 👍🏾👍🏾 👍🏾

@scaleaddiction

4 ай бұрын

Go for it!

😮😮😮😮😮😮😮 is amazing !!! Project

Wish i could like this video twice

@scaleaddiction

3 ай бұрын

Thanks

Nice job 👍👍👍👍 ❤

@scaleaddiction

4 ай бұрын

Thanks

You can use one channel for servos, just get a servo inverter

🔥🔥🔥

Cool. Subscription!

The only supra with a 2 cyclinder engine 😂 there is actually a proper 6 cyl inline made for model cars but its from a different company not Toyan if i am sure I think it was Howlin or something idk lol But u could buy it and put it in this vehicle (obviously after the project is finished) I see it has enough room for a bigger engine but that would get this to a new level Still I am impressed by ur skills and creativity good stuff mann ❤❤❤

Imho you should use hex screws. Philips screws looks cheap. But overall amazing like + subscribe and waiting for next vid.

superscale2k20 suspension would fit perfectly ✌️

@scaleaddiction

4 ай бұрын

That would be great

hi great video, i am doing the same, not yet started, what about the reverse gear.

Are you dividing it into small parts to print on a small printer?

trabalho incrivel queria um dodge viper acr minhatura

You need to look up drive shaft phasing with universal joints or those wheels will spin like shit. Also get another drive shaft, because some of that low priced chinesium stuff, sucks.

Why not go with the toyan inline 6?

Could you split the chassis in 4 parts in order to be able to print it on 220 printers too? It could be divided in 4 with screwshold

@ZhamYrahcaz

4 ай бұрын

That's what I did to make it fit my ender 5

is that a supra !!??

Such a bad angle on the drive shaft is probably going to give you problems later on down the my suggestion is lay the transmission down on its side and try and minimize the angle of the drive shaft

@scaleaddiction

4 ай бұрын

I know it looks horrible 😅, but I will put it on the side soon, after I run it

Nice work but.....many people dont realise that 3D printed parts has limits in streng and temperatures. I should use mixed parts with differents materials and realise that you are using a combustion engine....is going to kind soften the chassis with the heat. I hope it helps you.

@scaleaddiction

4 ай бұрын

Thanks, yes I'm aware of that, after I know everything perfectly measured, I will change the materials of print and ass insolation too

Is there any way to put throttle on zero with self centering like in FS i6s and use forward backward in same?

@scaleaddiction

4 ай бұрын

Maybe I can put a rubber band , if not using other sticks 🤔

Can we follow along with the CAD modeling?

@scaleaddiction

3 ай бұрын

I will put it in my pateron when I finish

Driveshaft is assembled incorrectly

Can I get a song list good work btw

Don’t use arduino, use esp32

Hey I’m completing a 2020 bmw m2 comp and my only regret is not getting a model that has all separate parts. Would you be able to tell me where you got this model from? Or did u separate them yourself? Just looking for models that doors and all body panels are seperate

@scaleaddiction

4 ай бұрын

It's my design model, the file link in the video description box

@istayhighi1540

4 ай бұрын

@@scaleaddiction o awesome thanks

Wonderful project ! Aren't you afraid the heat from the gas engine leads the 3D printed chassis to melt ?

@califuturist

4 ай бұрын

Metals can now be 3D printed.

Please fastly complete this project and than you start lamborgani project please

@scaleaddiction

3 ай бұрын

Thanks, most asked for nissan skyline r34 project 🤔

engine will melt the pla just saying

dang I was really hoping the arduino was gunna be part of the build so i can use a normal gun style controller

@orange_tweleve

4 ай бұрын

I'm kinda glad he ditched my arduino idea because that was such a pain in the ass for someone new to get things. Also his flysky has enough channels for gear shift etc etc. I'm sure he will add more functions later which will need more channels

@ajahniepemberton1860

4 ай бұрын

I just finish programing my Arduino I haven't work out the finer detailed but i want to have it set up to be adjustable withe the controller and a potentiometer I'm gunna mount on the car I'm also playing with the idea of adaptive suspension using a gyro to counteract body roll probable gunna run into allot of problems like weight distribution which is kind of one of my biggest problem Voltage Regulator Efficiency and calibrating it to prevent erratic behavior @@orange_tweleve

@ajahniepemberton1860

4 ай бұрын

@@orange_tweleve I have already programmed and Arduino to be able to control the four servo. I still need to do some fine-tuning and endpoint adjustments, and I also intend on making it have adaptive suspension with the use of a Gyro

😶😯😯😯👌👀👀

Its great but that engine will alst about 20mins

@scaleaddiction

4 ай бұрын

I run it for longer before

It bugs me that he is not using the 6 cylinder Toyan engine that looks more like the supra 2jz engine.

@scaleaddiction

4 ай бұрын

That 6 cylinder engine little over price for this project for now, 😅

Make 3d printer Toyota Supra❌ Make real Toyota Supra✔️🗿👍

Hello, could you please make 12mm hex mount, i was sent wrong wheels from AliExpress

@scaleaddiction

4 ай бұрын

Oh, I will look at it later, bc it not only the hex, to be changed

0:01 Владивостоксий вайб? Распил?