I tried, but you tube doesn't let me send a link. Just Google it, bring it up straight away..
@leebryantutah2 ай бұрын
Nice job cleaning up the original Zippo components, but i absolutely would not have glued it back into that wooden case.
@reborntools2 ай бұрын
Great point!
@chetnash59912 ай бұрын
Lol
@reborntools2 ай бұрын
🙃
@brandynpetersen80172 ай бұрын
Nice job. You've made that cleaver useful again. Don't let it rust. You gave me a few new ideas. I have a small pile of these, that I have accumulated over time, that need done up. I've done two. I like yours.
@reborntools2 ай бұрын
Thanks! I'm sure yours will turn up nice too...
@CrustyRestorations2 ай бұрын
Very nice video, great tools, skills, angle..keep up the good work👍👍
@reborntools2 ай бұрын
Thanks 👍
@eatoatmeal3 ай бұрын
Do you ever sell your restoration projects?
@reborntools3 ай бұрын
Never sold one
@saskia41393 ай бұрын
Such a fine restoration! And the new handle is beautiful! Thank you for the great video!
@reborntools3 ай бұрын
Thank you too!
@ChristopherSalisburySalz3 ай бұрын
Amazing work!
@reborntools3 ай бұрын
Thank you!
@ivanstiles70303 ай бұрын
Beautiful restoration. I like the American walnut handle you made. It looks great
@reborntools3 ай бұрын
Thank you very much!
@darrengriffiths23723 ай бұрын
Thats amazing job👍👍sir last life time now with lv in the right hands bro brilliant job dino uk😁👍
@reborntools3 ай бұрын
Thank you sir 🙂
@simonmorgan56993 ай бұрын
It's in my hands now and oh yes....I will be looking after it that's for sure
@OregonChuck3 ай бұрын
I’ve watched a lot of plane restoration videos, including one I thought couldn’t be topped. Well, you did it. This is the best plane restore video ever. Congratulations on a job well done and thank you teaching me some great techniques.
@reborntools3 ай бұрын
Glad you liked it!
@saskia41393 ай бұрын
Really good restoration and a fine video! Thank you!
@reborntools3 ай бұрын
Thank you!
@allkindsofoutdooractivities3 ай бұрын
Really nice work and transformation
@reborntools3 ай бұрын
Thank you!
@joseantoniosantos80223 ай бұрын
Ficou show trabalho de mestre
@reborntools3 ай бұрын
Thanks for your compliment!
@dd-nv6sw3 ай бұрын
Lots of work with beautiful results. Well done!
@reborntools3 ай бұрын
Thank you! Cheers!
@fehimbegic83653 ай бұрын
Very very nice, how did you deal inside frame rust
@reborntools3 ай бұрын
Had an acid bath before the hot dip galvanising
@fehimbegic83653 ай бұрын
@@reborntools thank you for answer, today I bring chasis of my 2007 pathfinder from sand blasting, all surface rust is gone. But inside is mess full of rust, I know that prior to zinc dip they do accid bath, but I am not sure that only hot accid bath will be just enough.
@josearistidessouzasantos93133 ай бұрын
Parabéns
@reborntools3 ай бұрын
Thank you!
@josearistidessouzasantos93133 ай бұрын
Parabéns
@reborntools3 ай бұрын
Thanks!
@kwerkies92504 ай бұрын
You should lap the sole of the plane only when the plane's assembled.
@reborntools3 ай бұрын
Maybe
@carlogle62074 ай бұрын
Very cool
@reborntools4 ай бұрын
Thanks!
@ivanstiles70304 ай бұрын
Very nice restoration.
@reborntools4 ай бұрын
Thank you very much!
@charlesgill88224 ай бұрын
Why
@reborntools4 ай бұрын
Just for you
@massimo19634 ай бұрын
Stupenda
@reborntools4 ай бұрын
Thank you
@TheAlgro1444 ай бұрын
What did he wipe on the handle? It darkened up quite a bit.
@reborntools4 ай бұрын
I used osmo oil . Can be used linseed oil too. The wallnut wood is already dark wood, and the oil makes it even darker...
@fhvchgjcc80514 ай бұрын
Подписка и лайк отл работа. Я сам тоже мастер оружейник изготавливаю холодные оружия и реставрация)))
@reborntools4 ай бұрын
Thank you very much, I appreciate it!
@Mikhail_Georg4 ай бұрын
По красоте
@reborntools4 ай бұрын
Cpacciba
@austinbennett95184 ай бұрын
What was the grit on the paper you used after the vinegar
@reborntools4 ай бұрын
As I remember 400 and 320. No rough ones to avoid scratches.
@user-py1ne8rr5z5 ай бұрын
❤❤❤❤❤Super Super 👍👍👍👍👍👍💞
@reborntools5 ай бұрын
Thank you ❤️
@johnnorman17935 ай бұрын
Top job, a really nice viking axe.! You have all the right gear, and you really know your stuff. Greetings from Australia
@reborntools5 ай бұрын
Thanks very much! Greetings 🙏
@ivanquiles49035 ай бұрын
What wood did you use for the handle?
@reborntools5 ай бұрын
American black wallnut
@dhuber49515 ай бұрын
If it was an ordinary kindling hatchet you ruined I wouldn't mind. That was a well crafted single bevel Kent pattern carpenters axe.
@reborntools5 ай бұрын
That's OK, still plenty of them around 😉
@stretchmfe49133 ай бұрын
Hey dhuber, I've got a well crafted single bevel Kent pattern carpenters axe that hasn't been "ruined". Want to buy it?
Пікірлер
How did you protect threads, etc. from galvanizing? Nice work!
Не правильно топор насажен
It's super 💪
What did you use to coat the handle? Beautiful build!
I used some osmo oil. People use that stuff for doors and kitchen worktops.
That was a antique worth about 900$
No, plenty of them in carboot sale. Got it for £3 😉
Nice restoration 👏👏
Thanks 👍
Well done, i prefer the previous shape, but great work 😊
Thanks! I made another one where I kept the original shape.
Excelente restauración.
Thank you!
Well done mate. A lot of work but you've an impressive axe.
Thanks bud!
Just think in about 100 years from now someone else will be restoring that 😂
That would be cool to see!
Love this awesome job !!!
Thanks!
I like this axe how can I get one?
You need to make one 🙂
NICE. Work.!!!!
Thanks!!!
You did a great job restoring that cleaver.Tgank you
Thank you!
Nice touch with the eagle head pins. Classy restore!
Thanks!
Stunning!! What was the white stuff you coated the wood in near the end?
Osmo oil, used them for kitchen worktops and doors too.
@@reborntools thanks
ESPECTACULAR!!!!
Thank you
мне одному интересно, как он будет её заправлять?
Only the case glued in, the insert is comes out normally
@@reborntools ааа.. тогда понятно)
Hello, a very nice job, could you perhaps send me the link to the Osmo oil
Sure www.ebay.co.uk/itm/131272328545?mkcid=16&mkevt=1&mkrid=711-127632-2357-0&ssspo=WG9XHyGBQvi&sssrc=4429486&ssuid=QjLTJS7MRzO&var=&widget_ver=artemis&media=COPY
I tried, but you tube doesn't let me send a link. Just Google it, bring it up straight away..
Nice job cleaning up the original Zippo components, but i absolutely would not have glued it back into that wooden case.
Great point!
Lol
🙃
Nice job. You've made that cleaver useful again. Don't let it rust. You gave me a few new ideas. I have a small pile of these, that I have accumulated over time, that need done up. I've done two. I like yours.
Thanks! I'm sure yours will turn up nice too...
Very nice video, great tools, skills, angle..keep up the good work👍👍
Thanks 👍
Do you ever sell your restoration projects?
Never sold one
Such a fine restoration! And the new handle is beautiful! Thank you for the great video!
Thank you too!
Amazing work!
Thank you!
Beautiful restoration. I like the American walnut handle you made. It looks great
Thank you very much!
Thats amazing job👍👍sir last life time now with lv in the right hands bro brilliant job dino uk😁👍
Thank you sir 🙂
It's in my hands now and oh yes....I will be looking after it that's for sure
I’ve watched a lot of plane restoration videos, including one I thought couldn’t be topped. Well, you did it. This is the best plane restore video ever. Congratulations on a job well done and thank you teaching me some great techniques.
Glad you liked it!
Really good restoration and a fine video! Thank you!
Thank you!
Really nice work and transformation
Thank you!
Ficou show trabalho de mestre
Thanks for your compliment!
Lots of work with beautiful results. Well done!
Thank you! Cheers!
Very very nice, how did you deal inside frame rust
Had an acid bath before the hot dip galvanising
@@reborntools thank you for answer, today I bring chasis of my 2007 pathfinder from sand blasting, all surface rust is gone. But inside is mess full of rust, I know that prior to zinc dip they do accid bath, but I am not sure that only hot accid bath will be just enough.
Parabéns
Thank you!
Parabéns
Thanks!
You should lap the sole of the plane only when the plane's assembled.
Maybe
Very cool
Thanks!
Very nice restoration.
Thank you very much!
Why
Just for you
Stupenda
Thank you
What did he wipe on the handle? It darkened up quite a bit.
I used osmo oil . Can be used linseed oil too. The wallnut wood is already dark wood, and the oil makes it even darker...
Подписка и лайк отл работа. Я сам тоже мастер оружейник изготавливаю холодные оружия и реставрация)))
Thank you very much, I appreciate it!
По красоте
Cpacciba
What was the grit on the paper you used after the vinegar
As I remember 400 and 320. No rough ones to avoid scratches.
❤❤❤❤❤Super Super 👍👍👍👍👍👍💞
Thank you ❤️
Top job, a really nice viking axe.! You have all the right gear, and you really know your stuff. Greetings from Australia
Thanks very much! Greetings 🙏
What wood did you use for the handle?
American black wallnut
If it was an ordinary kindling hatchet you ruined I wouldn't mind. That was a well crafted single bevel Kent pattern carpenters axe.
That's OK, still plenty of them around 😉
Hey dhuber, I've got a well crafted single bevel Kent pattern carpenters axe that hasn't been "ruined". Want to buy it?
@@stretchmfe4913I dare you to ruin it
That is an amazing remake!
Thank you🙂
Do you use it ?
No, it's on the wall...