I drive the same car mine is the 1,370 I thought they called it a tangerine dream. I just call mine the pumpkin
@micmac28003 күн бұрын
That may be the exact color. I wasn't too sure exactly what Chrysler called it back in 03.
@stevenfreiner65086 күн бұрын
Coupes have two doors sedans have four
@micmac28006 күн бұрын
Thanks for the enlightenment
@Sabie.6 күн бұрын
Dad be doing too much
@micmac28006 күн бұрын
I do!.. too much
@aaronvigil65916 күн бұрын
Agree, solid color maybe a lil pinstripe accents. Remove the SS, you already know what under the hood 😅
@micmac28006 күн бұрын
I was thinking a solid black cherry
@TeeToes15 күн бұрын
Seems solid
@micmac280015 күн бұрын
It is solid in and out... runs pretty good
@quadir607622 күн бұрын
Any idea why my 2014 volt only charges to a max range of 27-29 miles? It’s got 160,000 miles on it and when I first got it a month ago it charged to 29 miles now under a month later full charge is at 27 miles :( I sad
@micmac280022 күн бұрын
There's a lot of things you have to look at when you look at your charge rate. Do you run your AC a lot. Is it on high. Do you use any of your regeneration low gearshift. Do you run your heat too much. Do you live in our hilly area.? it could have some degradation to your battery. Look at your lifetime battery setting.( on the radio screen under economy button.
@zjhinsonvlogsАй бұрын
I would say Service High Voltage Charging System is the biggest problem with the car.
@micmac2800Ай бұрын
Agree.. but once that's figured out.. not a lot goes wrong from then on.. thanks for the tune in!
@freeagent8225Ай бұрын
Great low stressed engines, rarely do I go over 2000rpm.😅
@micmac2800Ай бұрын
I hear ya..lol.. I like to whine them out.
@gwgillhamАй бұрын
DYI ? Do Yourself In ?
@micmac2800Ай бұрын
Yes exactly.. DYI cutting
@x7slim8xАй бұрын
Doing a set tomorrow.... Yuck!
@micmac2800Ай бұрын
It's actually not too bad. Short extensions and a wobble head will be your best friend.
@jonathanmaldonado1530Ай бұрын
Its a 500cc not 250
@micmac2800Ай бұрын
Thanks .. I'm getting old.. 500c totally correct!
@Sabie.Ай бұрын
C A T
@micmac2800Ай бұрын
That's right!.. gold ⭐️ for you
@WONDAWOMAAAN2 ай бұрын
I’m old school so vintage way of killing the zombies is for me, this the sword. I’ll be Elizabeth Darcy. I am feelin in my heart though that zombies just want to live. Can’t we do something about this zepidemic?
@micmac28002 ай бұрын
Maybe if this happens we could start a zombie apocalypse fund to help the zombies not eat people, but give zombie hugs ..lolol
@WONDAWOMAAAN2 ай бұрын
My name is Belle and I’m working on my 2007 PT Cruiser this weekend, specifically the sensors. I changed the sensor in the front that you have shown here in this vid. I have to change the other one in the back under car. The check engine light is on and the code threw this sensor. I am a newbie and am learning things that usually the men in my life or auto shops have taken care of for me. Recently decided to budget like I taught Dave Ramsey everything he knows! That has lead me on this journey of DIY for everything including my car. KZread has been a great help, including this video. The sense of accomplishment of doing it myself while men watch proudly and aghast that a girlie girl (with a mani/pedi) gets into it and succeeds is amazing! SHERA!!! I am WONDERWOMAN! 👏🏼. Thanks for posting! Can u post a step by step on the other sensor for a 2007 PT Cruiser that’s in the back underneath the car? 🦸🏻♀️
@micmac28002 ай бұрын
Hi Bella, it is great to hear from you. Unfortunately, I do not have the same car anymore because we flipped it and sold it to somebody and it is still running strong and wonderful. However I do have a PTGT which I am going to look and see if the O2 sensors are in the same place, please subscribe so that you can catch my next video and I will show location of the O2 sensors and let you know exactly how to take them off. also, your journey sounds pretty awesome. I am so glad to hear women that work on cars and do the DYI thing.
@stktkcxwilp84962 ай бұрын
I jingle dress to we are finishing it thoe
@micmac28002 ай бұрын
Right on.. probably some deadly dancing too..
@AnthonyPlant-qn1os2 ай бұрын
i must say after 6 videos i have come to the conclusion you don't really show how to do shit. It's more like you figure it out and talk nonsense about it worse then the dam china directions.
@kellyzeigler4282 ай бұрын
it still looks good... 3 years old?
@micmac28002 ай бұрын
Yes, I believe it is pretty close to three years old now
@kellyzeigler4282 ай бұрын
trash!..put a trashbag on it!..lol P.T trash cruiser..lol
@micmac28002 ай бұрын
TRASH how dare you!.. haha.. well at least it's not the PT loser anymore.
@psychzach15882 ай бұрын
Make sure you keep your blower towards the center of the yard. Rookie mistake. Makes the debris collect at the center, so you can collect/burn it. All you can do now is replace the window, or tape a garbage bag to it.
@micmac28002 ай бұрын
Exactly.. I did not believe it was going to shoot a rock 40 to 50 feet away and bounce off the house and then into the window. It was a stroke of luck.!
@psychzach15882 ай бұрын
@@micmac2800 I've seen crazier. Seen a rock skip 50 feet on concrete and hit the door and break the window.
@micmac28002 ай бұрын
@@psychzach1588 Wow!!.. yeah, I almost wanna go and get a lotto ticket after what happened.. but I only have bad luck
@psychzach15882 ай бұрын
@@micmac2800 bad luck gang!
@rainetherapper82232 ай бұрын
Clean the yard before mowing and be mindful where the shit is being thrown
@micmac28002 ай бұрын
You know no one ever thinks about a rock being shot out of a mower from like 30 or 40 feet away and it hitting your window. Or bouncing off of something else and going through your window. I usually never mow the grass towards my car but this way I was far away from it, and it still broke the window, bounced off the house.
@rainetherapper82232 ай бұрын
@@micmac2800 damn man I guess it is what it is
@blindlesschild16922 ай бұрын
put a bag on it
@micmac28002 ай бұрын
I was thinking one of those black bags to simulate tint..lol
@randolphbernstrom80552 ай бұрын
"Promo sm"
@micmac28002 ай бұрын
Thanks
@Gillilandez2 ай бұрын
Good looking out!
@micmac28002 ай бұрын
Any time! Checkout the install of the new interior..
@elansleazebaganno2 ай бұрын
Hey man, so I have an 07 with the 6G75, do you absolutely have to remove the manifold to replace the back 3 cylinders' sparkplugs?
@micmac28002 ай бұрын
Unfortunately, I believe so. It really makes life a lot easier removing the intake manifold . It's not a lot of extra work. I took mine off because it gave me a lot more room and also because I was doing the valve cover gaskets. But the spark plugs are right up underneath that manifold also. Hope that helps!
@elansleazebaganno2 ай бұрын
@@micmac2800 thanks so much! I'll probably end up having to do the valve cover gaskets anyway when I do the plugs, so that helps a lot
@micmac28002 ай бұрын
@@elansleazebaganno no problem that's why I make this videos to help out.. thanks for tuning in.
@troyberecz27743 ай бұрын
I have one light retaining water. Do you just look for cracks and then repair them? Or are there common areas that allow the water to leak into the assembly?
@micmac28003 ай бұрын
Most of the time they are around the areas where the two pieces come together, and they are sealed with silicone or some kind of waterproofing. You have to look at your tail lights for cracks in the face also. Hope that helps.
@troyberecz27743 ай бұрын
@@micmac2800, Thank you. I appreciate the insight.
@micmac28003 ай бұрын
@@troyberecz2774 no problem thanks for watching
@mariaplacias91993 ай бұрын
I am having the same problem with my 2018 volt. Did you find out what is going on?
@micmac28003 ай бұрын
Yes I did. After making sure that I had enough coolant. The 12 V battery was new. I found out that one of the cells were dead . In my case. I got a whole new battery for it...there was a guy in Florida that put new batteries in for 3500
@mariaplacias91993 ай бұрын
@@micmac2800 thank you.
@micmac28003 ай бұрын
It's coming along
@TeeToes3 ай бұрын
That's gonna be wicket car once it's finished..when you think you have it all finished
@micmac28003 ай бұрын
I hope in a month or two..
@TeeToes3 ай бұрын
Time to come to red bank trout derby in May lol
@micmac28003 ай бұрын
Fishing in Canada 🇨🇦.. that's the plan!
@kellyzeigler4283 ай бұрын
cute
@TeeToes3 ай бұрын
That's chief material haha
@micmac28003 ай бұрын
Chief material lol😂
@TeeToes3 ай бұрын
Yeah. That's why Pauline charged me $200 to do my album cover..& I was ok to pay 200..I knew it was worth it
@micmac28003 ай бұрын
I know right ..200. A great deal
@TeeToes3 ай бұрын
@@micmac2800 plus there work time & effort..time and how good they do
@user-gb1jv3bq5l3 ай бұрын
That’s ridiculous!!!!
@micmac28003 ай бұрын
Crazy right?
@hasmanknitter40823 ай бұрын
Heres a hack for airbrushing. Use nail polish and reducer or acetone to thin it. Only like 2$ a bottle and you get sometimes four oz depending on how thin u go
@micmac28003 ай бұрын
Awesome!!.. thanks for the knowledge.
@societasdraconistarum3 ай бұрын
Because one is obd1 and the other is obd2. Code readers don’t work on obd1 you have to use a real scanner. Like genesis, otc something obd1 compatible. Any questions just ask. Edit: Obd2 is 96and up 16 pin standardized plug. Obd and Obd1 weren’t standard between manufacturers. GM’s original plug OBD was 8 pin second design obd1 16pin rectangle like in video.
@micmac28003 ай бұрын
Very good!!!... you nailed it.
@lauzonite3 ай бұрын
Gift my dad one ❤️
@micmac28003 ай бұрын
He's one lucky father!.. That was awesome gift.🎁
@ADHD1080P3 ай бұрын
Damn windows rolled up, and ac on is a HUGE flex, I dont think il ever get ac figured out
@micmac28003 ай бұрын
It's not too hard to put air-conditioning on your El Camino. You just have to get the right brackets and study up on AC.
@jakehammon8631Ай бұрын
@@micmac2800what do you study?
@micmac2800Ай бұрын
@@jakehammon8631 I looked up multiple things, Jake. I looked up function of the AC compressor. How to install compressor lines. What parts of the AC are very important to replace when AC goes bad. It was all through AC forums in KZread videos how to replace GM AC parts. It can be done you just have to look around different places in for different information.. A lot of the manufacturers will even have in their paperwork how to charge the system and how many pounds of refrigerant to use.
@kellyzeigler4283 ай бұрын
she says"yummy"
@micmac28003 ай бұрын
;)
@kenthompson47393 ай бұрын
It's a ok mower I have one.
@micmac28003 ай бұрын
Do you have the Briggs & Stratton in yours also or was yours with a Kohler?
@xXyaoixXxmatXx3 ай бұрын
I had this problem once already and got the battery replaced almost a year ago and it just happened agan. The first time it was a dead cell so im guessing thats happened again, but the battery i have is barely a year old.
@micmac28003 ай бұрын
Was the batteries under warranty?
@TeeToes3 ай бұрын
Should make a small used car dealership
@micmac28003 ай бұрын
You're right Ivan I should start a small car dealership. We can call at sleazy Sammy's automotive.😂
@Nixk.3 ай бұрын
Both because of the dust.
@micmac28003 ай бұрын
Pollen is bad here in the south.. hahaha
@michiganhooligans1123 ай бұрын
The f body fire bird would be nice. The 3800 series is insanely reliable and can be supercharged for like $200
@johnm85223 ай бұрын
That has an LS1. It's not a base model Firebird. I've never met anybody who didn't like a Trans Am. It's over 20 years old and still looks good.
@micmac28003 ай бұрын
Wow .. I didn't know that .. a supercharged v6 could rival the v8 right?
@PremixedDoge3 ай бұрын
I drive an old pt cruiser around for a while. It was fine to drive and it got good enough gas mileage. However, i dont want to do any work on them. That only makes me pass them up now
@micmac28003 ай бұрын
I agree, I cry a little inside when I have to work on the pt.lol
@TeeToes3 ай бұрын
I'd take that Saturn your mother had haha
@BeechSportBill4 ай бұрын
This pistol is now ILLEGAL in Washington State due to the threaded barrel
@micmac28003 ай бұрын
Really??... wow didn't know that.
@kellyzeigler4284 ай бұрын
shiny!
@joelh30304 ай бұрын
Mix the oil with brake clean in the socket hole then pump it or a use a towel. Thanks for the video!
@micmac28004 ай бұрын
Right on.. I just slopped up all the oil out of the spark plug hole with the paper towel.
@the-pezinator4 ай бұрын
You should grab the side steps, those are pretty rare and pretty nice
Пікірлер
I drive the same car mine is the 1,370 I thought they called it a tangerine dream. I just call mine the pumpkin
That may be the exact color. I wasn't too sure exactly what Chrysler called it back in 03.
Coupes have two doors sedans have four
Thanks for the enlightenment
Dad be doing too much
I do!.. too much
Agree, solid color maybe a lil pinstripe accents. Remove the SS, you already know what under the hood 😅
I was thinking a solid black cherry
Seems solid
It is solid in and out... runs pretty good
Any idea why my 2014 volt only charges to a max range of 27-29 miles? It’s got 160,000 miles on it and when I first got it a month ago it charged to 29 miles now under a month later full charge is at 27 miles :( I sad
There's a lot of things you have to look at when you look at your charge rate. Do you run your AC a lot. Is it on high. Do you use any of your regeneration low gearshift. Do you run your heat too much. Do you live in our hilly area.? it could have some degradation to your battery. Look at your lifetime battery setting.( on the radio screen under economy button.
I would say Service High Voltage Charging System is the biggest problem with the car.
Agree.. but once that's figured out.. not a lot goes wrong from then on.. thanks for the tune in!
Great low stressed engines, rarely do I go over 2000rpm.😅
I hear ya..lol.. I like to whine them out.
DYI ? Do Yourself In ?
Yes exactly.. DYI cutting
Doing a set tomorrow.... Yuck!
It's actually not too bad. Short extensions and a wobble head will be your best friend.
Its a 500cc not 250
Thanks .. I'm getting old.. 500c totally correct!
C A T
That's right!.. gold ⭐️ for you
I’m old school so vintage way of killing the zombies is for me, this the sword. I’ll be Elizabeth Darcy. I am feelin in my heart though that zombies just want to live. Can’t we do something about this zepidemic?
Maybe if this happens we could start a zombie apocalypse fund to help the zombies not eat people, but give zombie hugs ..lolol
My name is Belle and I’m working on my 2007 PT Cruiser this weekend, specifically the sensors. I changed the sensor in the front that you have shown here in this vid. I have to change the other one in the back under car. The check engine light is on and the code threw this sensor. I am a newbie and am learning things that usually the men in my life or auto shops have taken care of for me. Recently decided to budget like I taught Dave Ramsey everything he knows! That has lead me on this journey of DIY for everything including my car. KZread has been a great help, including this video. The sense of accomplishment of doing it myself while men watch proudly and aghast that a girlie girl (with a mani/pedi) gets into it and succeeds is amazing! SHERA!!! I am WONDERWOMAN! 👏🏼. Thanks for posting! Can u post a step by step on the other sensor for a 2007 PT Cruiser that’s in the back underneath the car? 🦸🏻♀️
Hi Bella, it is great to hear from you. Unfortunately, I do not have the same car anymore because we flipped it and sold it to somebody and it is still running strong and wonderful. However I do have a PTGT which I am going to look and see if the O2 sensors are in the same place, please subscribe so that you can catch my next video and I will show location of the O2 sensors and let you know exactly how to take them off. also, your journey sounds pretty awesome. I am so glad to hear women that work on cars and do the DYI thing.
I jingle dress to we are finishing it thoe
Right on.. probably some deadly dancing too..
i must say after 6 videos i have come to the conclusion you don't really show how to do shit. It's more like you figure it out and talk nonsense about it worse then the dam china directions.
it still looks good... 3 years old?
Yes, I believe it is pretty close to three years old now
trash!..put a trashbag on it!..lol P.T trash cruiser..lol
TRASH how dare you!.. haha.. well at least it's not the PT loser anymore.
Make sure you keep your blower towards the center of the yard. Rookie mistake. Makes the debris collect at the center, so you can collect/burn it. All you can do now is replace the window, or tape a garbage bag to it.
Exactly.. I did not believe it was going to shoot a rock 40 to 50 feet away and bounce off the house and then into the window. It was a stroke of luck.!
@@micmac2800 I've seen crazier. Seen a rock skip 50 feet on concrete and hit the door and break the window.
@@psychzach1588 Wow!!.. yeah, I almost wanna go and get a lotto ticket after what happened.. but I only have bad luck
@@micmac2800 bad luck gang!
Clean the yard before mowing and be mindful where the shit is being thrown
You know no one ever thinks about a rock being shot out of a mower from like 30 or 40 feet away and it hitting your window. Or bouncing off of something else and going through your window. I usually never mow the grass towards my car but this way I was far away from it, and it still broke the window, bounced off the house.
@@micmac2800 damn man I guess it is what it is
put a bag on it
I was thinking one of those black bags to simulate tint..lol
"Promo sm"
Thanks
Good looking out!
Any time! Checkout the install of the new interior..
Hey man, so I have an 07 with the 6G75, do you absolutely have to remove the manifold to replace the back 3 cylinders' sparkplugs?
Unfortunately, I believe so. It really makes life a lot easier removing the intake manifold . It's not a lot of extra work. I took mine off because it gave me a lot more room and also because I was doing the valve cover gaskets. But the spark plugs are right up underneath that manifold also. Hope that helps!
@@micmac2800 thanks so much! I'll probably end up having to do the valve cover gaskets anyway when I do the plugs, so that helps a lot
@@elansleazebaganno no problem that's why I make this videos to help out.. thanks for tuning in.
I have one light retaining water. Do you just look for cracks and then repair them? Or are there common areas that allow the water to leak into the assembly?
Most of the time they are around the areas where the two pieces come together, and they are sealed with silicone or some kind of waterproofing. You have to look at your tail lights for cracks in the face also. Hope that helps.
@@micmac2800, Thank you. I appreciate the insight.
@@troyberecz2774 no problem thanks for watching
I am having the same problem with my 2018 volt. Did you find out what is going on?
Yes I did. After making sure that I had enough coolant. The 12 V battery was new. I found out that one of the cells were dead . In my case. I got a whole new battery for it...there was a guy in Florida that put new batteries in for 3500
@@micmac2800 thank you.
It's coming along
That's gonna be wicket car once it's finished..when you think you have it all finished
I hope in a month or two..
Time to come to red bank trout derby in May lol
Fishing in Canada 🇨🇦.. that's the plan!
cute
That's chief material haha
Chief material lol😂
Yeah. That's why Pauline charged me $200 to do my album cover..& I was ok to pay 200..I knew it was worth it
I know right ..200. A great deal
@@micmac2800 plus there work time & effort..time and how good they do
That’s ridiculous!!!!
Crazy right?
Heres a hack for airbrushing. Use nail polish and reducer or acetone to thin it. Only like 2$ a bottle and you get sometimes four oz depending on how thin u go
Awesome!!.. thanks for the knowledge.
Because one is obd1 and the other is obd2. Code readers don’t work on obd1 you have to use a real scanner. Like genesis, otc something obd1 compatible. Any questions just ask. Edit: Obd2 is 96and up 16 pin standardized plug. Obd and Obd1 weren’t standard between manufacturers. GM’s original plug OBD was 8 pin second design obd1 16pin rectangle like in video.
Very good!!!... you nailed it.
Gift my dad one ❤️
He's one lucky father!.. That was awesome gift.🎁
Damn windows rolled up, and ac on is a HUGE flex, I dont think il ever get ac figured out
It's not too hard to put air-conditioning on your El Camino. You just have to get the right brackets and study up on AC.
@@micmac2800what do you study?
@@jakehammon8631 I looked up multiple things, Jake. I looked up function of the AC compressor. How to install compressor lines. What parts of the AC are very important to replace when AC goes bad. It was all through AC forums in KZread videos how to replace GM AC parts. It can be done you just have to look around different places in for different information.. A lot of the manufacturers will even have in their paperwork how to charge the system and how many pounds of refrigerant to use.
she says"yummy"
;)
It's a ok mower I have one.
Do you have the Briggs & Stratton in yours also or was yours with a Kohler?
I had this problem once already and got the battery replaced almost a year ago and it just happened agan. The first time it was a dead cell so im guessing thats happened again, but the battery i have is barely a year old.
Was the batteries under warranty?
Should make a small used car dealership
You're right Ivan I should start a small car dealership. We can call at sleazy Sammy's automotive.😂
Both because of the dust.
Pollen is bad here in the south.. hahaha
The f body fire bird would be nice. The 3800 series is insanely reliable and can be supercharged for like $200
That has an LS1. It's not a base model Firebird. I've never met anybody who didn't like a Trans Am. It's over 20 years old and still looks good.
Wow .. I didn't know that .. a supercharged v6 could rival the v8 right?
I drive an old pt cruiser around for a while. It was fine to drive and it got good enough gas mileage. However, i dont want to do any work on them. That only makes me pass them up now
I agree, I cry a little inside when I have to work on the pt.lol
I'd take that Saturn your mother had haha
This pistol is now ILLEGAL in Washington State due to the threaded barrel
Really??... wow didn't know that.
shiny!
Mix the oil with brake clean in the socket hole then pump it or a use a towel. Thanks for the video!
Right on.. I just slopped up all the oil out of the spark plug hole with the paper towel.
You should grab the side steps, those are pretty rare and pretty nice
If I had a jeep I would
I have that same jeep
I bet it's a beauty!