thank you for posting this very helpful information
@johnathonberrier56833 ай бұрын
where the hell is there a Radio Shack those left KY like 15 years ago :( I Miss the Radio Shack
@jmd19355 ай бұрын
Awesome video 🚗💨
@johndicks12506 ай бұрын
Just wondering do I need to take motor out to change traction magnets?
@bushy20006 ай бұрын
Where do you get the totally flat shoes I'm after some for an old ideal set
@charlesdixon57307 ай бұрын
Great information!! Recently acquired a tyco set with cars in pieces. This will help me rebuild them. Thank you!!
@thevision76347 ай бұрын
Just soak it in some bleach. Bleach (the kind in a big bottle for washing white clothes) disolves the chrome right off in a short time like magic with no scrubbing at all. If there is paint over the chrome you have to scrub the painted areas until you get down to the bare chrome (I use a stiff bristled brush and sometimes just my fingernail). Then soak it again and that chrome will magically disappear too. At least that works for older chromed slot cars like Tyco and AFX. Have not tired it on a new auto world. Oh I did try soaking a Black chrome AW Batmobile that was scratched all to heck in some rubbing alcohol and it stripped the black off and left the chrome undercoat intact. I assumed the bleach would dissolve that chrome off too if I had wanted to do that. Give the household bleach a try. It worked for me. A lot less stinky than ammonia. It’s a cheap experiment anyway since most households have a big jug of liquid clothes washing bleach around somewhere. 😀
@anthonysomics90737 ай бұрын
Must have watched this , almost every time had a bad race experience, back to basics "" , it may be the best " training " , , what can't you apply, ,, years later ...
@sandfranj8 ай бұрын
Been binge watching all your stuff, you should make new stuff brother theres a resurgence in ho slots now we need more people like you! Subbed
@robertbirmingham71089 ай бұрын
I just rediscovered 440x2 tyco slots, your vids are invaluable thanks for the great information.
@im5150247 Жыл бұрын
Help! lol, so, Iv'e got my wizzard storm all torn down to the barrel, on those do I also just yank on them with pliers? Also, 4 brushes came out, did they break in half, or, is there supposed to be that many? Thanx.
@vitoman50 Жыл бұрын
Sounds like they broke in half, if you put them back together they should work.
@im5150247 Жыл бұрын
@@vitoman50 Thanx, yeah, just got some new ones, and a 2.8 ohm armature motor, runs like a scolded dog!! Gonna use ur vid to help me drop the old armature in my Tyco narrow chassis!
@stuffthings Жыл бұрын
Can you tell me what you are doing with the scale around 4:02 in? How is that measuring the magnets?
@mortonbeard2240 Жыл бұрын
My man. 😊
@irok1d Жыл бұрын
I can't get proper voltage reading on the track like you 1st show. I have the tri power packs to each lane but no matter what setting it's on it dosen't match the set voltage and fluctuations are crazy.
@filmtajm35 Жыл бұрын
Vitoman, What happened with you? You just disappeared?
@vitoman50 Жыл бұрын
Got divorced and had to move into a smaller home. Had to tear down the track, because no where to put it. Hoping in the future I can get back to my videos, got a ton more stuff to put up.
@Rich-de7ds Жыл бұрын
You didn't do the rebuild.
@jimmenice1618 Жыл бұрын
Good idea
@philricci2012 Жыл бұрын
I make 4 wheel drive versions of those old G Plus chassis.
@Rich-de7ds Жыл бұрын
How and do you have videos?
@mortonbeard2240 Жыл бұрын
My table is 20 feet by 4 feet. What's yours?
@dstrelioff Жыл бұрын
What’s the orange controller you use?
@DLG779 Жыл бұрын
you make it look easy
@MikeRemvidas Жыл бұрын
Do you still do slot cars vitoman ?
@joshbrekke6374 Жыл бұрын
I have a mean green armature that is bad on its original motor plate. I want to reuse the motor plate and top brass gear. How do I remove the armature? I have a balanced double wound balanced quadlam I want to install. I have a red knob puller I got from the guy in Illinois but it will not get under the gear. Clearance is too tight.
@jjfo1980 Жыл бұрын
What makes a professional slot car racer? You getting full time employment with pay?
@50rbrt Жыл бұрын
I like speed!!
@50rbrt Жыл бұрын
Into magnet traction and tyco 440"s
@50rbrt Жыл бұрын
I need bodies! you know where I can get some....Tore most of track down and now redoing
@slotslidershoslotcars Жыл бұрын
The track sums so nice and smooth! What did you do to get it so nice and quiet, without all the clickty clack common with sectional track ( mine is all Tomy AFX)
@markmutchmore560 Жыл бұрын
You got the best videos 👍
@markmutchmore560 Жыл бұрын
Can you get parts for magnetraction title 440s things like that
@markmutchmore560 Жыл бұрын
And tires all the parts for magnetraction 440 I've been doing this for 50 years and I got about a hundred cars that I need a lot of parts tires you know all the parts do you know where I can get parts
@nasanction Жыл бұрын
I just finished 32 wire solders to precipitate 4 taps. I feel ya!
@vitoman50 Жыл бұрын
Nice!
@nasanction Жыл бұрын
Because I use such a wide range of cars from T-Jets to Vipers, I went with the Professor Motor electronic controller. They change resistance automatically according to the car. Also, you can buy a 2 sided foam tape that is just the right height for the boarders and boards. ;) Thanks for the lane painting tip! I found a pack with my lane colors "Red White Blue & Yellow" Easy peasy!
@jeffnorbert18712 жыл бұрын
That silver/blue/orange Corvette body is one of my favorites. I really enjoy working on 440/440X2s. So easy once you get the hang of. Those and Tomy Super G+ are my favorites. Tomy Turbos and Lifelike M right behind them. Rarely do anything with old Aurora anymore. Bored with them.
@bigbuck44382 жыл бұрын
Thank you for this video!
@randy18172 жыл бұрын
What's the name of the glue you used for the tire?
@zedsodead2 жыл бұрын
Do all jumpers run back to the source?
@randy18172 жыл бұрын
What is the brass insert on that Red wheel press?
@vitoman502 жыл бұрын
That comes with the tool so your axle will pass through when you are installing one rim and don't have a rim on the opposite side. Thanks for your question.
@jeffnorbert18712 жыл бұрын
Nice layout. Great for competition. Like it alot.
@johnnyirwin98382 жыл бұрын
What do you put under your HO track. And do you tack the track down to the plywood if you have time let me know thx j🇺🇸✝️
@vitoman502 жыл бұрын
Johnny, no I put it straight on the wood. There is foam insulation glued to the underside of the wood board. No I don't screw my track down, I glue the cork trail roadbed the the board so the track don't move around. The 1/4 in mdf does the rest. If the track breaks or gets damaged it is easier to remove and replace.
@johnnyirwin98382 жыл бұрын
Thank you for your response l appreciate your time knowledge it me not understanding. Forgive me can l put cork under the track and glue the cork down then put HO track on top again thick head. 🇺🇸✝️😊🙏👍🚙🚘✝️
@vitoman502 жыл бұрын
You could put cork under the track. Are you doing it to keep the noise of the board down?
@johnnyirwin98382 жыл бұрын
@@vitoman50 thank you for your response. Yes sir and better stability if that make any sense thank you for your time 😊🇺🇸✝️
@MrLuridan2 жыл бұрын
Hi vitoman, I just discovered your channel. You're a very generous soul, sharing all you knowledge with us, and I'm learning a ton from you. Thank you, and best of luck to you.
@vitoman502 жыл бұрын
Thanks for watching
@randy18172 жыл бұрын
I'm looking to sell my AFX track I have more than 60-15" straights, 4-9" 6-6" and 3" straights and a lot of 18-15-12-9-6" turns. Also a Viasue timing system, Enough to make at least a 50ft 4 lane track. If you do want it maybe you know someone who does. Keep making those vids.
@allenking75392 жыл бұрын
Looking good ! I have found that painting the berm/ cork strip prior to install is easier. Also, may try doing a flat finish spray primer coat first. I used that on the Aurora Speed Corners with success. Just taped over the yellow plastic and sprayed flat black on them. Looking forward to seeing how the MDF strip bends for the turn wall. Keep up the good work !
@vitoman502 жыл бұрын
Thanks for the heads up
@slotcarbt8342 жыл бұрын
Question: On an old armature remove the wrapped wiring then run a small wire from each of three 3 armature legs. would this be to fast or would it just burn up
@vitoman502 жыл бұрын
Never wound a arm, think you would have to run a more than one wrapping of wire.
@martinritch52412 жыл бұрын
Very good video very informative and I thank you for That. Maybe the camera operator could maybe get a little more focus and close-ups of assembly
@vitoman502 жыл бұрын
Thanks for the information
@lowercentenary2 жыл бұрын
Can you make a simple smaller oval out of this 4 lane set?
@vitoman502 жыл бұрын
Yes
@auroramodelmotoring-roadra13802 жыл бұрын
Use a hole-making tool to tighten the rivets. Squeeze them tight. Much easier and works great
@randy18172 жыл бұрын
Nice track!! Are you using a break on the controller? It looks like the car stops when it comes to a turn. Try no breaks, the cars slide into the turns much better. Then you can feather it through the turns. It makes for much better racing.. I can't use breaks. it makes the cars too jittery...
@vitoman502 жыл бұрын
Randy, yes we use the brakes on faster cars. Love the T-jets a lot they slide better. Thanks for watching.
@jettafixer72 жыл бұрын
I'm with you. I don't use brakes either.
@jamespennington97192 жыл бұрын
Very good detailed "How To!" As well as bonus tips n tricks! Much appreciated Vitoman!
@blkft2 жыл бұрын
Don Vitoman, "Paint it with THIS or sleep with the FISH". 😁 Pretty cool,,, subscribed.
@markbuterbuagh49712 жыл бұрын
Nice video now where did your friend Eric find those connecters?I have looked every were for those connecters can you help thank you.
Пікірлер
thank you for posting this very helpful information
where the hell is there a Radio Shack those left KY like 15 years ago :( I Miss the Radio Shack
Awesome video 🚗💨
Just wondering do I need to take motor out to change traction magnets?
Where do you get the totally flat shoes I'm after some for an old ideal set
Great information!! Recently acquired a tyco set with cars in pieces. This will help me rebuild them. Thank you!!
Just soak it in some bleach. Bleach (the kind in a big bottle for washing white clothes) disolves the chrome right off in a short time like magic with no scrubbing at all. If there is paint over the chrome you have to scrub the painted areas until you get down to the bare chrome (I use a stiff bristled brush and sometimes just my fingernail). Then soak it again and that chrome will magically disappear too. At least that works for older chromed slot cars like Tyco and AFX. Have not tired it on a new auto world. Oh I did try soaking a Black chrome AW Batmobile that was scratched all to heck in some rubbing alcohol and it stripped the black off and left the chrome undercoat intact. I assumed the bleach would dissolve that chrome off too if I had wanted to do that. Give the household bleach a try. It worked for me. A lot less stinky than ammonia. It’s a cheap experiment anyway since most households have a big jug of liquid clothes washing bleach around somewhere. 😀
Must have watched this , almost every time had a bad race experience, back to basics "" , it may be the best " training " , , what can't you apply, ,, years later ...
Been binge watching all your stuff, you should make new stuff brother theres a resurgence in ho slots now we need more people like you! Subbed
I just rediscovered 440x2 tyco slots, your vids are invaluable thanks for the great information.
Help! lol, so, Iv'e got my wizzard storm all torn down to the barrel, on those do I also just yank on them with pliers? Also, 4 brushes came out, did they break in half, or, is there supposed to be that many? Thanx.
Sounds like they broke in half, if you put them back together they should work.
@@vitoman50 Thanx, yeah, just got some new ones, and a 2.8 ohm armature motor, runs like a scolded dog!! Gonna use ur vid to help me drop the old armature in my Tyco narrow chassis!
Can you tell me what you are doing with the scale around 4:02 in? How is that measuring the magnets?
My man. 😊
I can't get proper voltage reading on the track like you 1st show. I have the tri power packs to each lane but no matter what setting it's on it dosen't match the set voltage and fluctuations are crazy.
Vitoman, What happened with you? You just disappeared?
Got divorced and had to move into a smaller home. Had to tear down the track, because no where to put it. Hoping in the future I can get back to my videos, got a ton more stuff to put up.
You didn't do the rebuild.
Good idea
I make 4 wheel drive versions of those old G Plus chassis.
How and do you have videos?
My table is 20 feet by 4 feet. What's yours?
What’s the orange controller you use?
you make it look easy
Do you still do slot cars vitoman ?
I have a mean green armature that is bad on its original motor plate. I want to reuse the motor plate and top brass gear. How do I remove the armature? I have a balanced double wound balanced quadlam I want to install. I have a red knob puller I got from the guy in Illinois but it will not get under the gear. Clearance is too tight.
What makes a professional slot car racer? You getting full time employment with pay?
I like speed!!
Into magnet traction and tyco 440"s
I need bodies! you know where I can get some....Tore most of track down and now redoing
The track sums so nice and smooth! What did you do to get it so nice and quiet, without all the clickty clack common with sectional track ( mine is all Tomy AFX)
You got the best videos 👍
Can you get parts for magnetraction title 440s things like that
And tires all the parts for magnetraction 440 I've been doing this for 50 years and I got about a hundred cars that I need a lot of parts tires you know all the parts do you know where I can get parts
I just finished 32 wire solders to precipitate 4 taps. I feel ya!
Nice!
Because I use such a wide range of cars from T-Jets to Vipers, I went with the Professor Motor electronic controller. They change resistance automatically according to the car. Also, you can buy a 2 sided foam tape that is just the right height for the boarders and boards. ;) Thanks for the lane painting tip! I found a pack with my lane colors "Red White Blue & Yellow" Easy peasy!
That silver/blue/orange Corvette body is one of my favorites. I really enjoy working on 440/440X2s. So easy once you get the hang of. Those and Tomy Super G+ are my favorites. Tomy Turbos and Lifelike M right behind them. Rarely do anything with old Aurora anymore. Bored with them.
Thank you for this video!
What's the name of the glue you used for the tire?
Do all jumpers run back to the source?
What is the brass insert on that Red wheel press?
That comes with the tool so your axle will pass through when you are installing one rim and don't have a rim on the opposite side. Thanks for your question.
Nice layout. Great for competition. Like it alot.
What do you put under your HO track. And do you tack the track down to the plywood if you have time let me know thx j🇺🇸✝️
Johnny, no I put it straight on the wood. There is foam insulation glued to the underside of the wood board. No I don't screw my track down, I glue the cork trail roadbed the the board so the track don't move around. The 1/4 in mdf does the rest. If the track breaks or gets damaged it is easier to remove and replace.
Thank you for your response l appreciate your time knowledge it me not understanding. Forgive me can l put cork under the track and glue the cork down then put HO track on top again thick head. 🇺🇸✝️😊🙏👍🚙🚘✝️
You could put cork under the track. Are you doing it to keep the noise of the board down?
@@vitoman50 thank you for your response. Yes sir and better stability if that make any sense thank you for your time 😊🇺🇸✝️
Hi vitoman, I just discovered your channel. You're a very generous soul, sharing all you knowledge with us, and I'm learning a ton from you. Thank you, and best of luck to you.
Thanks for watching
I'm looking to sell my AFX track I have more than 60-15" straights, 4-9" 6-6" and 3" straights and a lot of 18-15-12-9-6" turns. Also a Viasue timing system, Enough to make at least a 50ft 4 lane track. If you do want it maybe you know someone who does. Keep making those vids.
Looking good ! I have found that painting the berm/ cork strip prior to install is easier. Also, may try doing a flat finish spray primer coat first. I used that on the Aurora Speed Corners with success. Just taped over the yellow plastic and sprayed flat black on them. Looking forward to seeing how the MDF strip bends for the turn wall. Keep up the good work !
Thanks for the heads up
Question: On an old armature remove the wrapped wiring then run a small wire from each of three 3 armature legs. would this be to fast or would it just burn up
Never wound a arm, think you would have to run a more than one wrapping of wire.
Very good video very informative and I thank you for That. Maybe the camera operator could maybe get a little more focus and close-ups of assembly
Thanks for the information
Can you make a simple smaller oval out of this 4 lane set?
Yes
Use a hole-making tool to tighten the rivets. Squeeze them tight. Much easier and works great
Nice track!! Are you using a break on the controller? It looks like the car stops when it comes to a turn. Try no breaks, the cars slide into the turns much better. Then you can feather it through the turns. It makes for much better racing.. I can't use breaks. it makes the cars too jittery...
Randy, yes we use the brakes on faster cars. Love the T-jets a lot they slide better. Thanks for watching.
I'm with you. I don't use brakes either.
Very good detailed "How To!" As well as bonus tips n tricks! Much appreciated Vitoman!
Don Vitoman, "Paint it with THIS or sleep with the FISH". 😁 Pretty cool,,, subscribed.
Nice video now where did your friend Eric find those connecters?I have looked every were for those connecters can you help thank you.