Another great info vid! Thank you

@vitoman50

6 жыл бұрын

Mike Douglas thanks for watching.

Come to think of it I have several cars that jump on start up. Now I know how to fix that. Thanks Vitoman.

@vitoman50

6 жыл бұрын

T B So glad I can help. Thanks for watching.

Thanks Kevin 👍🏻🏁 Going to try this on mine. That shoe travel can be a bear on certain rods. The screw deal 😂 I've been looking for the same screw now for a quick minute 😂😂😂 yes that is the screw ya need on the front of your T~Jet !!! I've found that out when they get lowered. Great tips

@vitoman50

6 жыл бұрын

SIKK SLOTS HO Thanks. Got to share the knowledge.

@artsmart07

6 жыл бұрын

www.ebay.com/itm/M1-M1-2-M1-4-M2-Phillips-Flat-Head-Self-Tapping-Wood-Screws-304-A2-70-Stainless-/172225926046?var=471051622103&hash=item281977139e:m:m-qXtP2FML6ejgBj0opiORg

@sikkslotsho9024

6 жыл бұрын

Simon Sez Thank You 👍🏻‼️ Very much

Great video, I have a few cars I need to do this too that have this issue.

@vitoman50

6 жыл бұрын

Glad I can help.

Excellent information

@vitoman50

6 жыл бұрын

Thanks for watching.

@vitoman50

6 жыл бұрын

+Christopher Smith thanks. Hope this helps. Thanks for watching.

I just had to do adjust afew shoes last nite nice tips mahalo

@vitoman50

6 жыл бұрын

Aloha Slot Cars Hawaii Glad to help. More to come. Thanks for watching.

Where do you get the totally flat shoes I'm after some for an old ideal set

Really appreciate your videos..(I know/understand they arent easy to do in all one take sometimes) Its really hard to see most of your closeup shots becauise of the light and shadow-not enough light directed on the subject matter. (Just need to put a light from above or just behind you maybe) The 3rd shoes you picked up sure looked to be the silver or silver plated Tuff Ones shoes shaped just like the T-jets because the step was rather high for an AFX non mag shoe.?....but honestly it was hard to see exactly from this far away. . The short step shoes, 4th one, were used on Trucks, SEMI's, Blazers perhaps and such, and all those type vehicles as well as a lot of the lighted and specialty type chassis so to speak that came after the first generation Magna-traction years and lighted ones from all of my experience. They can be flattened with a pair of small duck bill pliers and work great as ski shoes if one wishes to do that. the short steps just lose contact on the smaller radius turns and makes the cars de-slot , especially when they are not adjusted correctly. *best to replace or flatten them out for sure) Even though it is easier to change pins you can cut the blade pins in a triangle shape (wide at the chassis to almost a point at the slot)or cut or taper them to any desired shape even to resemble the straight p[ins, although it is a little bit of work it does work if you're really on a budget.

@vitoman50

6 жыл бұрын

Simon Sez Cool thanks for the heads up! I will do like you said about the light. It's hard to see what needs to be fixed when I'm blasting through the video trying to keep them short and to the point. Again Simon keep the comments coming. Your friend in the hobby. Kevin vitoman50.

Just saw your video. I’m getting back into ho slots with my son. I am also in the Youngstown area. I will have to check boardman hobby out. Haven’t been there in years

@vitoman50

3 жыл бұрын

Cool maybe if you want we can meet at Boardman Hobby sometimes and maybe when this covid-19 bs is over. You and your son could visit me and Visa versa.

@Plasticmercenary

3 жыл бұрын

@@vitoman50 for sure! I just ordered a few parts for a quick custom. I will post a video when it’s done

@vitoman50

3 жыл бұрын

Checking out you videos.

Thank's a lot for your Videos Kevin Christian A Frenchman. (Nobody is Perfect.......)

@vitoman50

6 жыл бұрын

+Christian Le gac you are very welcome. Hope my videos help. Thanks for watching.

My slot car will run with worn pick up shoes but not new ones what could be the problem?

Awesome stuff. You gonna do videos again?

@vitoman50

3 жыл бұрын

Yes going to start here real soon.

Hi vitoman50...I like your show...I want to get into slot cars...can you help me pick the right one? What do you think about scale 1/32 Or do you think afx is best

@vitoman50

6 жыл бұрын

anne lowery check to see what kinds of scale tracks are in your area. If none, pick one that will fit in the space you have. 1/32 takes up alit of space. Ho scales is easy to fit in a smaller space and easy to take care of. Me I have a Tomy AFX track lot more track for various layouts. Thanks for watching.

@NomadicSociety

6 жыл бұрын

hey i recently picked up two carrera go sets both had no loops and both were 28 feet of track, both sets combined cost around $200 with these two sets you could make a huge two lane set up or a sweet huge 4 lane oval with high banks on all four lanes, really nice! so i also have a sweet afx 50 foot four lane set $240 afx international its called, all these sets are on ebay everyday brand new and are the best deals out there ,i would highly recommend these and nothing smaller if you have $200 to throw at your hobby ,you will be in business! no need to upgrade either set up for years really

@NomadicSociety

6 жыл бұрын

read my comment below this one!!! get the carrera go gt competition and carrera go photo finish these are by far the best 1/43 scale for the $ or get the afx super international ho scale!!! $200 either way then have fun ;)

dosent more drag take away from speed im new to this just asking

@vitoman50

6 жыл бұрын

chris camfield Thanks for the question. Laying the pickup flat in the track may add a little drag but not enough to make a noticeable difference. The benefits in doing so is highly benefitial that you will see a much improved car and times. What is being done here is improving the contract area of the pickups which gets more electricity to the motor. Hence more speed. More electricity to the motor the faster the motor spins the faster the car goes.

@mikedouglas2546

6 жыл бұрын

vitoman50 and they stick better

What size is the beveled screw?

@vitoman50

6 жыл бұрын

plycuda1966 72 found them at Ace hardware. Never looked anywhere else yet. I. Their stainless screw cabinet.

@plycuda1966

6 жыл бұрын

Any idea of the measurement? Such as 8-32 x 1/4

@vitoman50

6 жыл бұрын

plycuda1966 don't remember will check today.

@plycuda1966

6 жыл бұрын

Thank you

@vitoman50

6 жыл бұрын

plycuda1966 the size is 3-48 x 1/4 stainless steel. Hope this helps.