Пікірлер

• 
  @briansmith60332 күн бұрын

  Great video & advice....thank you !

• 
  @briansmith60339 сағат бұрын

  Great & not expensive solution to 'worn out' key fobs (12 ,years old) repair. Video certainly helped, but relatively easy fix. Thanks again

• 
  @andrewpearson33513 күн бұрын

  Aghhh tried fixing mine but list the 6.5 socket. Theres not an awful lot of room to manoeuvre with porky fingers like mine. French cars eh? Brilliant thanks

• 
  @finnigan163 күн бұрын

  Just what I needed. Thanks!

• 
  @aakashpariyangadu35197 күн бұрын

  love you videos 👍❤️

• 
  @alinmartinescu29197 күн бұрын

  Super ❤

• 
  @rhiiilol23998 күн бұрын

  I can’t get the frame to click back in. Any suggestions?

• 
  @FF04ORD8 күн бұрын

  Are the holes clear? Is the frame ok anything broken or bent?

• 
  @briansmith60339 сағат бұрын

  I had the same problem but ended up 'trimming' the 4 pegs on the frame with scissors and eventually they snapped into place and the job was done !

• 
  @simonav96678 күн бұрын

  Exactly the video that I needed, thank you !

• 
  @jbrovage19 күн бұрын

  Anyone tell you that you look a LOT like Alex Horne from TaskMaster?

• 
  @FF04ORD19 күн бұрын

  nope but i can see why you think that lol

• 
  @jbrovage19 күн бұрын

  @@FF04ORD BTW: thanks for your video, it was very helpful!

• 
  @laregimbal22 күн бұрын

  I've been using one in the CD player forever, but lately it's becoming loose and falling out. 😢 I tried a similar one to the clamp one you recommend, but you have to squeeze it open to grab the phone, which my tiny hands are just unable to do. I'm not quite sure about the particular one you have, but I may give it a try... Thx! ❤❤❤

• 
  @FF04ORD22 күн бұрын

  This one is more of a two-hander to pull apart .. Hope it does the job for you

• 
  @nige7323 күн бұрын

  Grabbed the old one out of the bin and that little plastic frame came out so easy...so sooo much easier... thanks 👍 Will be ordering the rubber button.

• 
  @nige7323 күн бұрын

  Hahaha we have two keys that this has happened to...we bought ywo replacement fobs as we thought it was going to be easy.... Wrong...the bloody original is a sealed unit....ended up having to cut it open with a Dremel to get the board out...what a bloody pain in the arse...this looks like the easier way to go about it.

• 
  @FF04ORD23 күн бұрын

  How would you replace the battery if it was a sealed unit lol?

• 
  @mohammadi5523224 күн бұрын

  Sehr schön…

• 
  @otislashley936526 күн бұрын

  🤔.... "Magnificent"👍🏾👌🏾💯✅

• 
  @walkwithmeandkeeley142128 күн бұрын

  We have a car meet. On the 20th July. 11 - 3 At The lincolnshire wolds railway. All cars welcome

• 
  @user-sf3xr4ik5bАй бұрын

  Thank you very much for your video. 2 weeks ago i paid in some local garage 90 quids for 1 link only + labour. Now i bought a set of 2 and i will replace both of them befor my mot. Many thanks!

• 
  @FF04ORDАй бұрын

  Glad i could help

• 
  @DaviMqrsАй бұрын

  Cheers mate, just bought it. Exactly the holder I need.

• 
  @FF04ORDАй бұрын

  Glad I could help

• 
  @tombenefer6800Ай бұрын

  Usin a ratchet for a hammer? Really!

• 
  @marco3055Ай бұрын

  Thank you man, informative and seemingly easy to do 👍

• 
  @Bassjunkie_1Ай бұрын

  Did it have an affect on your mpg?

• 
  @FF04ORDАй бұрын

  Nope still getting 54 I think it says on the dash

• 
  @BlackRoostar-cf2yvАй бұрын

  What in the absolute fuck, kia.......

• 
  @DriveWithAndyАй бұрын

  Wowzers

• 
  @angelicawestman627Ай бұрын

  Do you know how to change the front badge? 🙏

• 
  @FF04ORDАй бұрын

  Sorry I don’t, I’ve not had to do mine.

• 
  @JFHKipperАй бұрын

  Thank you 👊😎👍 Great safety advice too.

• 
  @RogerCoppsАй бұрын

  I recently had my car restored at Defenders Northwest LLC., but unfortunately, the service was far from satisfactory. Despite paying a significant amount of money, the work was delayed by several days without any explanation, and when I finally received my car back, the final result was disappointing. To make matters worse, some of the parts were still not working properly. When I contacted the shop about these issues, they were dismissive and unhelpful, leaving me feeling frustrated and angry. If you're considering car restoration services, I strongly advise against choosing this shop. Save yourself the time, money, and hassle by choosing a more reliable and trustworthy service provider.

• 
  @reminiz1Ай бұрын

  In the states is different you will have to turn on the ignition then you will have to turn the light on (do not leave it on Auto lights), you have 10 sec to flash your bright lights five times then you have to press the brakes three times and wait about 20 seconds until the battery light flashes about three times then your BMS is set

• 
  @FF04ORDАй бұрын

  Thanks for sharing

• 
  @WilliamBrown-pw1jcАй бұрын

  Defenders Northwest LLC has been been accused of running a multi-year fraudulent restoration scheme. A 63 page lawsuit naming Defenders Northwest LLC, Brian Hall and Michele Hall, and AUTOHOME USA has been filed and can be accessed here or through an online search.

• 
  @mikeswain9085Ай бұрын

  Is the only way to watch footage of a journey by using the SD card in a PC or can you view footage through the app on a mobile please?

• 
  @FF04ORDАй бұрын

  You can use mobile app but it’s not the easiest app to use.

• 
  @mikeswain9085Ай бұрын

  Thanks for the help.

• 
  @selseyonetwenty4631Ай бұрын

  I just tackled this job and thought I would raise a point that I can't remember if you covered (sorry I watched the video last night and don't remember so maybe you did say this). The light unit is poorly designed. The final inch of the red plastic part is very easy to snap off when levering out the unit against the final clip. OK if you take care but of course you might not realise the first time. Whoever had my car before had done this and glued the broken piece back in place. Main issue is that it leaves the unit vulnerable to rain and crap getting in, so I will be sealing mine with some silicone. Once the broken bit is back in place it looks fine (I didn't notice it until I removed the lamp assembly myself).

• 
  @FF04ORDАй бұрын

  Thanks for the comment. Yes mine is the same on the other side. Someone has glued it. It’s an easy thing to break by mistake

• 
  @zvonko9210 күн бұрын

  Unfortunately I can confirm this, I broke mine today on 2015 mk3.5 with 200.000 km and glued it (I tried to apply glue generously inside where red plastic meets gray plastic so hopefully it is sealed ok). The last clip was so stuck that it felt like another screw was there (this was probably the first time it was removed as I bought the car in early 2019). I wiggled it for good 5 minutes and of course it released only after that red plastic snapped 🤦‍♂ poorly designed indeed.

• 
  @usuallyfixingtinkering2 ай бұрын

  You'll get there with practice and have a really high quality product there! There is a demand for such things. Its your time in designing them that people don't see when they see the price. That is the problem in selling anything youve made - people only see the price... not how much time it took to make them!

• 
  @FF04ORD2 ай бұрын

  Thanks it’s all practise.. had some really good feedback already so watch this space 😀 it does take quite abit of time to design them tho.. abit like making KZread videos lol

• 
  @baldrickhornby96462 ай бұрын

  If you make 3D prints for inside the car use PETG instead of PLA . PLA will warp with heat inside the car

• 
  @FF04ORD2 ай бұрын

  Thanks for that.. 🙂

• 
  @dizzy_cap_car_show2 ай бұрын

  Nice man! I like them dude: I’ll get one or two from you soon dude 😎👍

• 
  @FF04ORD2 ай бұрын

  That be awesome man.. just let me know what your after and I’ll try draw something up

• 
  @DAZZAMAN32 ай бұрын

  Think you'll do well mate it's always worth trying your own stuff 👍

• 
  @FF04ORD2 ай бұрын

  Thanks that’s the idea 🙂

• 
  @edoardofavaro61982 ай бұрын

  Is the procedure similar on the renault clio mk5?

• 
  @FF04ORD2 ай бұрын

  I’ve never done a clio but most front brakes are the same

• 
  @edoardofavaro61982 ай бұрын

  The only tutorial i have seen on the clio mk5 says to go on the service mode on your laptop before proceed on changing the brakes🧐@@FF04ORD

• 
  @davyd56292 ай бұрын

  Ive just perchest a 17 plate focus estsate titainum really enjoying

• 
  @memphis_sean81692 ай бұрын

  I actually like that one but I'm in the US 🤷

• 
  @FF04ORD2 ай бұрын

  Do they not have it on u.s Amazon?

• 
  @LiamR902 ай бұрын

  I have a Mk3 hatchback. My boot in now leaking like a sieve. My local garage can't repair it and Ford won't take responsibility. They have spot welded it during manufacturing and are saying it's been in an accident, which it hasn't.

• 
  @FF04ORD2 ай бұрын

  Where is it leaking

• 
  @LiamR902 ай бұрын

  The annoying thing is that Ford always say the car looks like it's been in an accident previously that's why the leak has occurred. They say this because it removes their liability and because they can see its been spot welded. When in fact, it's them that have done the welding when it was being manufactured.

• 
  @labellamaffia2 ай бұрын

  Sounds amazing

• 
  @raghu14512 ай бұрын

  Hello sir, Any tips or advise. Should I go for the short throw shifter? I once drove an ST model with the short throw mods and was really impressed. So is it worth getting this mod in my 2013 1.6ltr tdci focus? Plz kindly advise.

• 
  @FF04ORD2 ай бұрын

  Sorry I can’t help with that. I’ve never had a short shifter

• 
  @RCMADNESS.2 ай бұрын

  Hi mate if you plan on getting more fresh chameleon products I have a promo code you can use that will get you 10% off :) code is insignia220

• 
  @Sandokans2 ай бұрын

  Hello. Thanks for sharing. For the front, what part number is it?! Cheers ❤

• 
  @FF04ORD2 ай бұрын

  Sorry I am not sure on the front as didn’t need doing

• 
  @virgilcornelius62702 ай бұрын

  Can the plastic broken part be replaced or do you need to buy the whole motor

• 
  @FF04ORD2 ай бұрын

  id buy a new motor as it handles alot of strain. glueing will just probably snap it again

• 
  @jimmyhaywood44552 ай бұрын

  Great video 👏

• 
  @FF04ORD2 ай бұрын

  Thanks

• 
  @charliecoco21152 ай бұрын

  Amazing what a difference a bit of cleaning and painting can do. Transformed the appearance!

• 
  @FF04ORD2 ай бұрын

  Defiantly! Worth doing

• 
  @user-vd4df9iz5j2 ай бұрын

  Defender Northwest LLC. Gig Harbor, WA, A local Car Restoration Shop. I'm extremely dissatisfied with their communication. I've been waiting for several weeks to receive the necessary parts, which they have to order from another source. They haven't given me any timeline for when the work will be finished, and they are not responsive to my texts or phone calls. This level of customer service is unacceptable!

• 
  @emadbara75972 ай бұрын

  Thank you !

• 
  @MarkJudd-wl2eq2 ай бұрын

  I done mine today and the best thing I found was use tar remover I used auto Glyn lift the boot up sorted it in tar remover for about 10 minutes once you got it lifted then it peels of and then use a plastic scraper and tar stuff softened all the glue once I scraped off a clean rag wipe it clean hope this help took about half hour

• 
  @labellamaffia3 ай бұрын

  Would love to see a cold start in this not using the choke and just pumping the gas pedal instead

• 
  @FF04ORD3 ай бұрын

  It probably wouldn’t start that well. The chokes there to make it easier.

• 
  @labellamaffia3 ай бұрын

  @@FF04ORD yeah I know just would make a great video! ☺️☺️

• 
  @carstenjuhler98423 ай бұрын

  Hello what size is torks and umbraku good work

• 
  @austinmatthews3473 ай бұрын

  I own a red 2013 plate 2.0tdci titanium x estate as far as i am aware the zetc s tit x and st deisel all have the 163bhp dw10c engine what mpg does yours sit at around town also to note all years had digital climate on tit tit x and st mate my car is only at 61k and i only do around 3k a year i am toying with the idea of fitting the zetec s bodykit

• 
  @FF04ORD3 ай бұрын

  Around 54mpg I think. Yes they all share the same engine but the st has bigger upgrades injectors etc.

• 
  @austinmatthews3473 ай бұрын

  @@FF04ORD either you live in a flat part of uk or something is wrong with mine and yet its only covered 61k alao when you say they all share same engine i think you will find that only zetec s and tit x have 163bhp the lower spec trims like zetec studio and another spec i cant remember have 140bhp

• 
  @FF04ORD3 ай бұрын

  The 1.6/1.5 are different engines. If you only do 3k a year your engine will be clogging up with carbon etc as only doing start stop journeys. Diesel need roughly ideally no less than single 25/30 mile drives. Especially the 2.0 the 1.5 would be better for small trips and little useable tbh

• 
  @austinmatthews3473 ай бұрын

  @@FF04ORD actually mate the 1.6 and 1.5 would suffer the same on short journeys and its the deisels fitted with the dreadful dpf that suffer and thats due to the fact the conmen who thought up the dreadful idea of fitting a wallet draining device that captures soit only to release it elswhere fitted these things diesels prior to common rail and dmf were so long lasting and lenth of journey only effected mpg due obviously to the time it takes to get a big deisel warm i wouldnt get the 1.6 or 1.5 my last one was a mk2 1.6 estate and it was underpowered also the dv6 engine is shite. Your claim of over 50mpg doest stackup fords own mpg claims are as follows. Urban 46mpg extra urban 68.9 combined 57.7 mpg all of which will not be achievable in real life

• 
  @FF04ORD3 ай бұрын

  @austinmatthews347 shows avg as 54. I’ve worked it out manually and it’s only 2/3 off