My Alfa Romeo Giulietta
Contact through social media with any suggestions or video requests
The content is based on personal experiences and should not be considered as professional advice.
The laws and regulations regarding vehicles, modifications, and driving vary from one jurisdiction to another. It is the responsibility of each viewer and consumer to familiarize themselves with their local laws and regulations before attempting any modifications, repairs, or actions on their vehicles.
I am not liable for any losses, damages, or injuries that may occur as a result of the use of the information or materials provided in this KZread channel. Any actions taken based on the information in this channel are at the sole discretion and responsibility of the viewer.
It is always recommended to consult with a qualified automotive professional before making modifications to your vehicle.
By accessing and using this KZread channel, you acknowledge and agree to the above disclaimer.
Пікірлер
I prefer the original colours, but appreciate the tip. Hadn't thought about just destroying them, haha.
Most people do mate. Yeah haha never heard of anyone saving centre caps for later 😂
Good Video! Thumbs up
Damn, I changed it, but same problem. It Worked When I just changed it, but 1 day later, same problem.. 😢
If it fixed the problem when you changed it, double check your crimp/solder connections?
check the connections in the door hinge - they're worn where the ziptie holds them - cut that thing off and fix the wiring.
Same for me lol. I changed the sensor, was not easy. Worked for a day then same problem. It says -30 C degrees when it is +40 C outside. I would not care but the aircondition doesn't work probably because of this.
@@leecasper6657 AC is involved only to the degree of temperature being close to the freeze (it does not simply engage then) Did you check the door hinge harness? Unless you got a used sensor, problem's in a different place. EDIT: dismiss, the second part - I thought it was a Volvo... lol
@@leecasper6657 of course if the vehicule indicate negative temp, air conditioning can't work !
Where I can search tris pices?🤔🙏🏻
Hi, I just updated the link in the description 👍 hadn't realised seller changed name
thanks marcus just made the modification and it's pretty easy to replace the LED as soon as you have an hot air welding station
I used a normal soldering iron. But I did see somebody use one of those and it looked very precise. If I do more of it, I might invest. Glad it worked 👌
I've been waiting for this for years. Yep that's me. LOL
😂😂 I ended up buying the spare cluster just to get it out the way haha
Can i find it on alixpress if yes the link please
I struggled finding a working set on aliexpress. These are the only ones someone found that worked and easy to be delivered
74mm?
Yeah that's it mate 👍
What size are these mate? I’ve got same alloys and want to order black ones too
60mm mate 👌
@@marcus_motors_ legend thanks dude. Will order now
Mate random question but do you know anywhere that does seat covers to fit the giulia.. most universal ones do NOT fit, I’ve bought 3 types and they all don’t fit
Hi mate great videos really helpful! Where did you buy these bulbs if you don't mind? .It's the last thing I have to do on my G to make it a complete led conversion.Cheers
Sorry ignore me just realised you posted them in the description😂 keep up the good work!
No worries 😂 they were the most difficult to come across too
Great job, great video now get the Hoover out😂
😂 I hate doing the interiors, outside all day long haha
good man thanks a lot....
Nice one mate, big difference 👍
Thanks dude. Bought the same ones. They work great, no error
Nice one mate, like reversing with high beams on isn't it 😂
@@marcus_motors_ yeah its a game changer😅
Cheers for uploading this, my hose shat itself so was wondering how to change it to an upgraded one anyway, video did the trick!
Well worth it mate 👍
@@marcus_motors_ yep got it on now, well worth it as you say :)
Thanks mate!
The aircon has stopped on my 500x although the temp is reading..my question is if it is an incorrect reading ie 16° in 3 others cars but 21° in mine would this stop the aircon from working?
This is common with the giuliettas, not sure about yours. For the price of it, I'd try this first, even before a regas
Have you saw the vid from Jerry Hernandez KZread ref this fix..can you comment on his removal of the mirror case to access the sensor.
Useful video. Where did you find the black/silver badges in metal?
You can Find all over the internet. Just search for Alfa Romeo giulietta black logo
Sorry mate, youtube shat itself the other day and wiped the descriptions of a few random vids www.ebay.co.uk/itm/255489043612?mkcid=16&mkevt=1&mkrid=711-127632-2357-0&ssspo=3VV3z-IwSoG&sssrc=4429486&ssuid=qW5AT9QyRXS&var=&widget_ver=artemis&media=COPY
Very useful video Where did you bought the part from
Link is in the description mate. If they don't deliver to you, there's a bloke in the giulietta section of alfaowner.com 👍
thanks bro
👍 did it fis your problem
@@marcus_motors_ yes, I am grateful to you for this video
Thats not what mine looks like....
hey mate thanks for the video. Any reason why mine throws an error on the dash? might be able to fix with resistors? Thanks
Hi mate. If it's the same bulbs from the link, I wouldn't know. Have you changed both before testing? 2 types of bulbs making it shit itself?
@@marcus_motors_ Sorry forgot to mention i’m using OSRAM bulbs. I can’t get the ones in the link shipped here :(
Ahhh got ya got ya. Other than the ones I've linked mate, I can't help sorry
You can run an extension to the boot, too.
Great job mate. Yep, that C4 stuff ain't cheap!
Worth it though. Easy alternative if you don't a sprayer for clear coat
Really handy videos you have Marcus. Thsanks for sharing,. even though I have a 147, your vids have saved me so much time. Thanks
Glad they helped 👍 don't see many 147 now!
Hello, what type of battery is for the key?
Hi, cr2032 👍
I’ve had so much trouble finding a male coupling the attached to the machine from the m-22 hose every one of them seems to not fit.
There are 2 versions of the M22. You have M22/14 and an M22/15. Just check the internal diameter to see which one you require.
Sorry, missed your comment until somebody else replied. The only hose I've used is the one I linked, ot had a list of compatible machines
You destroy 50€ badge to replace with 5€ one
The one in the video I'd previously replaced was also a 5€. But that must've been a better quality one and fooled you 😂
Thanks a lot - it was a bit nerve-wrecking (OF COURSE the clip fell out), but still much easier than taking it all apart and removing the headlight assembly. It will probably go much easier the next time, too.
Once you've done it the first time, it all makes sense haha yeah definitely a lot quicker
Thx for video. My key is wide open. How can i fit it inside
Alright mate, not sure what you mean? Send us a photo in Instagram if you can 👍
Thank you so much for the video! My sensor kept saying it was 80 degrees celcius outside.. was hessitant to change it myself but this video made it very easy!
Go for it! Could use crimpe fitting to make your life easier, I soldered just for the fun of it
Thanks so much! Saved me a lot of headache as I bought the car with the small cap missing on the passenger side, had a replacement cap and did not understand why I can't fit it. This video made me realize I still had the black part of the cap inside the door, and I had to remove it to fit the new part.
It's one of those where you don't know what's in the inside till you take it out haha
Thanks. Looks pretty straight forward for a fuel filter.
It's easy mate. There's a comment on this video where someone had the suggestion of undoing the bolts to the whole cannister, save dripping and diesel in the engine bay 👍
That loose terminal could contact the uncovered ground terminal easily. Better to cover it with some heat shrink.
Car, year....????
Great guide, thanks!
It's always on by default when you start the car ?
Yes mate
@@marcus_motors_ thank you
Well done and keep enjoying your Giulietta anyway you like, from a fellow owner but of a completely standard car ;)
I do mate, I'll keep going with it haha takes all sorts 👍
Thanks for this video , i have a 150.2 and it has the same hose so one day I might upgrade it too
Do it mate, massive improvement. I don't lose my rag every time I wash the car now haha
Jesus!! What the hell are these other KZreadrs doing?....pulling half the car apart to change a fkng light bulb. You are a legend. Great video!
😂 a lot of people still prefer doing it that way. More risk with dropping the retaining clip is what puts most people off I think. Glad it helped though mate, thanks
@@marcus_motors_ Thank you, pouring with rain so haven't done it yet but looking forward to trying your technique
@Brazill253 ahhhh. Don't thank me just yet then 😂
@@marcus_motors_ All done. Clip ofcourse came off (I caught it)..and was slightly bent on one of its mounting prongs..I found if I removed the top rubber cap on the light housing I could actually see through to where it fits in place and the whole clip action made more sense in my head. I re bent the clip to its original position and managed to blindly get it back in position with my now mutilated forearm. All working, just in time for inspection tomorrow. Thanks again mate. Subscribed.
Risk to reward mate haha that's all it is, gotta get a good feel of the clip, once it makes sense and you've got it in your head, it's easy. Appreciate it 🤙
good video but you dont show how to remove the glass
Hi mate, I added the link to that video in the description. Tried to make it short as possible and avoided filming removing the glass twice for people who may have already seen the wing mirror removal video 👍
My Exhaust is covered in sh*t. What’s the best way, or product to get mine back to looking like yours mate?😁 Love all the videos though, everything I need to know👍🏼
They can get to a point where they'd need more than a polish. Without looking mate, if a few passes with autosol and wire wool isn't getting it off, I'd try a fallout remover to get heavy soot off, but if it's pitted I'd say get a new pair and stay ontop of them with regular cleaning. Thanks mate, glad they're helping 👍
Ugly
Thats me currently, turbo on my 1750 went bye bye...
Time for hybrid 😏
Hi Marcus. Thanks for the interesting video. I have uploaded complete service tutorials for high-pressure cleaners such as Karcher, Nilfisk, Elektra Beckum, and Lavor. One of them is the Nilfisk E 140.3 cleaner repair manual, which is more or less identical to your Nilfisk E 145.4. However, they have a few small details that are different. One of them is, for example, how the high-pressure hose is connected to the reel (winch). My cleaner is different, so I can't upgrade it to the hose you bought. But still, your video and advice are perfect for many who have a similar connection method as you. The reason why you have so few views (currently only 210 in 5 months), even though your video would help many, is that you do not have so-called keywords in the title of the video and also in the description of the video and possibly keywords with hashtags in the description of the video. For example, add "Nilfisk" to the name and it will already help the KZread algorithm to recommend your video to those who are looking for similar videos or are solving a similar problem and would like to replace the high-pressure hose with a better one. Hopefully, this will help you a little (I'm no expert in this field since I have a very short channel too, but this is said to help, as well as a lot of "likes" and comments under the videos) and your videos will get even more views and your channel it will grow faster, which can help you monetize. Good luck. Greetings from Slovakia. Slavo.
Hi mate, I'll give them a watch when it comes round to me doing mine. Thanks for the advice, I've been slacking so much with youtube. No consistency at all with priorities being elsewhere, but will give that a go 👍
Thanks for the info.
Same for alfa romeo 159??
I don't think so mate. Same principles might apply, as in access from the spine of the door but I can't help with that one mate
hard... alfa romeo: bad... , go led H7 !!! and filter K and N.
Retrofitted led headlight aren't legal in the UK. But not being able to see the bulb with type of lense, you'd probably be safe to change them
On the other hand, I can confirm that they do not dazzle. Not official also in France, not approved yet. "Philips Ultinon Access LED"@@marcus_motors_
Which bulbs did you get white or cold white? 😊
Cold white mate. Bit of a blue tint to them 👍
Thanks Marcus, super clear video for a complete novice like me - job done! Thankyou
Novice myself! 😂 glad it helped, saves paying a garage 👍
Do you by any chance know where i can get a black badge like that for my 147 cause I’ve ordered it a few times but it came with a white cross instead of chrome…
www.ebay.co.uk/itm/353696977698?mkcid=16&mkevt=1&mkrid=711-127632-2357-0&ssspo=-pisqppasxq&sssrc=4429486&ssuid=qW5AT9QyRXS&var=&widget_ver=artemis&media=COPY Should be good with that one! Thats the listing I purchased mine through 👍