Removing Mirror Caps for Painting - Wrapping - Hydrodipping Giulietta/Mito/159

Автокөліктер мен көлік құралдары

Mirror caps - www.alfaworkshop.co.uk/parts/...

Пікірлер: 6

  • @chriswaite2313
    @chriswaite2313 Жыл бұрын

    Really helpful, thank you for taking the time to film your journey!

  • @AMi-pv4jt
    @AMi-pv4jt11 ай бұрын

    Thank you, very useful!

  • @marcus_motors_

    @marcus_motors_

    11 ай бұрын

    No worries! Thank you, let me know hoe you do, if you chamge yours

  • @One_over_the_eight
    @One_over_the_eight10 ай бұрын

    To avoid breaking the fourth clip use a T10 torx to remove the three screws holding the mirror motor on. The hole you can see behind it for the wiring is big enough to get two fingers through. The fourth clip is a 'push down' one to release. I felt safer using a small dent puller to remove the glass and tooth picks to hold the other three in the 'released' position while I pushed on the fourth one. The 159, Giuletta and Mito share the same wing mirrors so the covers are the same.

  • @m7mdkhateeb358
    @m7mdkhateeb3582 жыл бұрын

    Nice job 🔥, where i can buy the same carbon fiber mirror cap and the carbon fuel flap ?!, in the link that you put there’s only the original one (black)

  • @marcus_motors_

    @marcus_motors_

    2 жыл бұрын

    These are the original ones, just had them hyrdodipped. Got a spare fuel flap for a few quid from a breaking giulietta. The mirror caps are the exact ones I took off 👍 depending on turn around, I thought some people might want to buy a spare set and have those dipped

Келесі