Пікірлер

• 
  @alfredocanto9901Күн бұрын

  My instead of flashing, it just goes solid green but i still dont get no throttle respond

• 
  @spudskirc4458Күн бұрын

  @@alfredocanto9901 Have you check to see if your channel 2 is working? Trying putting the servo in channel 2 and esc in channel 1 and see what happens.

• 
  @MrDirectNL4 күн бұрын

  Thanks. Clear explanation. KZread is better than reading my manual. 😂

• 
  @noahstarkkk513615 күн бұрын

  Where can i find the adapter for the charger

• 
  @user-wk3ql4zw4y16 күн бұрын

  Why is my steering and throttle reversed, I have to switch the buttons on the transmitter to reverse on both. Any help appreciated.

• 
  @owennorth962329 күн бұрын

  Any chance in some help on how to fit a bigger motor ?

• 
  @spudskirc445829 күн бұрын

  I flipped the motor mount 180 degrees similar to what you do with the original Arrma cars.

• 
  @owennorth962329 күн бұрын

  @spudskirc4458 cheers dude ! I had thought about this, I eyed it up and didn't think I'd get anything next to the centre diff.

• 
  @midnightrcclub9046Ай бұрын

  Thank you . Your video helped

• 
  @iraqirc3409Ай бұрын

  By the way im upgrading my TRX 4 defender 1/10

• 
  @iraqirc3409Ай бұрын

  Hi thank you for this video but im having problem if you can help me i did as you but the first stage where i dont connect the esc to the receiver and i start the esc then i press the set button the motor turns one way then after few seconds stoos but it doesn't go the other direction and the green light stays green and the second stage its not doing what it should can you or anyone had the same problem can help advice me

• 
  @noreenkemal97662 ай бұрын

  So if the lipo battery is full do I put it on decharge or storage mode

• 
  @MovinOGАй бұрын

  hey have you found out the answer yet?

• 
  @baggieboy7912 ай бұрын

  Thanks very much. Very clear instructions. My Grasshopper has been doing a few odd things since swapping from the tble 02s so I think calibration is in order.

• 
  @The_D_Train2 ай бұрын

  Hmmmmmm I’d like a peek into this…

• 
  @kalebfrolander97822 ай бұрын

  After it flashes once it doesn’t flash again

• 
  @BIGCENTT2 ай бұрын

  Ya

• 
  @RoostedFilms2 ай бұрын

  Outstanding cheers mate

• 
  @kjflyte50883 ай бұрын

  Hitek charger just rebranded sky rc

• 
  @nathanfactor29593 ай бұрын

  Never blinks 5 second blink and turns off

• 
  @diuchdbajsk3 ай бұрын

  same problem here

• 
  @jonathanlewis9493 ай бұрын

  You legend. Thanks so much.

• 
  @spyda13373 ай бұрын

  Would this setup be good for a traxxas stampede?

• 
  @spudskirc44583 ай бұрын

  It would be an on budget setup but would say a Hobbywing Max10 would be better.

• 
  @pablowheels3 ай бұрын

  Whats the name of the things that srparate your cables on the motor

• 
  @spudskirc44583 ай бұрын

  They are wire clips I 3D printed.

• 
  @snakes3012713 ай бұрын

  hi there could you tell me if you did anything about the pillow ball slop in this car? quite a bit in mine im not happy about

• 
  @tomv33614 ай бұрын

  How to set EPA with this radio?

• 
  @spudskirc44583 ай бұрын

  It doesn’t have that function I don’t believe.

• 
  @Aussiem8e4 ай бұрын

  Is that just stock gearing? Just bigger esc and motor?

• 
  @stogie06084 ай бұрын

  Does this calibrate the TSM automatically too?

• 
  @luukasvRC4 ай бұрын

  Thanks🎉

• 
  @ICHIBANDIPPER4 ай бұрын

  Thank you so much, for us illiterate newbies who can’t read instructions 😂..this video is much appreciated! 🙏🍻

• 
  @spudskirc44584 ай бұрын

  You’re welcome. Glad it helped :)

• 
  @bobsrc69634 ай бұрын

  Thanks you so much

• 
  @lukasDC85 ай бұрын

  Cheers bro 😎 It works perfectly 😎😎😎😎

• 
  @spudskirc44585 ай бұрын

  Nice one. Glad it helped.

• 
  @np_detecting5 ай бұрын

  what electronics and components do you have there to reach that speed?

• 
  @spudskirc44585 ай бұрын

  Stock motor and castle esc

• 
  @Miro81115 ай бұрын

  I nic się nie spaliło, przecież on jest do 4S...

• 
  @spudskirc44585 ай бұрын

  No the motor was standard and didn’t burn up.

• 
  @owen85386 ай бұрын

  Can you set cut off voltage

• 
  @spudskirc44585 ай бұрын

  No I don’t believe you can set the cut off voltage it automatically does at 4.2v per cell.

• 
  @owen85385 ай бұрын

  @spudskirc4458 yes you can lower that tho my 1 is not cutting out at voltage keeps going maybe cause I don't have the balance board connected.Any idea why my 1 not cutting out Team orion Advantage

• 
  @owen85386 ай бұрын

  Can it discharge aswell

• 
  @danielmerrin96996 ай бұрын

  YOU SAVED A HORNETS LIFE... 😂 THANKYOU BROTHER

• 
  @spudskirc44585 ай бұрын

  Glad to hear it helped 😁

• 
  @lawn_care4u6 ай бұрын

  I have the bugsta which is the same internals as the carnage from what I've been told, took it apart as the wheels won't spin, and you can see only half of the gear is touching the spur, it's like the gear is in backwards as it won't align right, second time had this issue. Is the gear meant to line up exact to the spur? Except mine is now chewed up. Thank you.

• 
  @spudskirc44585 ай бұрын

  Hi, it should mesh so the teeth are touching properly, if it doesn’t then the gears are worn or they’re a miss match of pitch type.

• 
  @JoshMayyte6 ай бұрын

  Really thought i was going to have to send my RC back and you were my saviour! Thank you sir! 🙏

• 
  @MicromittenHunter7 ай бұрын

  My arrma outcast 4s is having an issue with jittery throttle input. Barely wants to go. I’ve tried to re calibrate and it won’t let me go passed neutral. If I try do do full throttle and hit the button or reverse it doesn’t beep

• 
  @tothehunt7 ай бұрын

  Thank you it worked better than the Traxxas video

• 
  @RC10GT8 ай бұрын

  Thank you

• 
  @brianTwwjd8 ай бұрын

  Where's the receiver? How do yo bind it?

• 
  @spudskirc44588 ай бұрын

  The receivers under the esc you need to unscrew the 2 screws on the esc and the receiver box lid will open. Is it the stock radio you have?

• 
  @aidaningham74848 ай бұрын

  Can this charger be used to put the batteries into storage mode? And is this hard?

• 
  @spudskirc44588 ай бұрын

  Hi, yes I can confirm it had a storage mode. No it’s easy to use instead of selecting charge/balance you can press + a few times and it will change to storage.

• 
  @aidaningham74848 ай бұрын

  @@spudskirc4458 Will it tell you when storage mode is complete or will you have to monitor the screen and unplug when you see the correct voltage?

• 
  @ginadelia56618 ай бұрын

  thanks for shairing forthis

• 
  @Hacsta8 ай бұрын

  Hi, how fast was that pass? What upgrades is needed to reach that speed?

• 
  @teamofrcbodies65808 ай бұрын

  Damm 8s..

• 
  @gloryrainwing77738 ай бұрын

  merci !!! je suis francais et cette video est trop bien sa ma aider merci!!!

• 
  @user-qs7cr8tj8f8 ай бұрын

  Thans bro

• 
  @dentaldowntime8 ай бұрын

  My kids screwed up my Maxx and it went forward when I pulled the trigger and when I tried to go in reverse. Had no idea what was going on but this fixed it! Thanks.

• 
  @user-lf3wy6iw7n9 ай бұрын

  What motor and esc did you use

• 
  @user-lf3wy6iw7n9 ай бұрын

  What motor and esc did you use

• 
  @spudskirc44589 ай бұрын

  Castle XLX2 and TP motor

• 
  @user-lf3wy6iw7n9 ай бұрын

  How did you manage to make the motor fit

• 
  @BulletBeena10 ай бұрын

  Thank you for this. It's my first time using LiPo batteries and there was nothing in the instructions about how to plug the balance lead in, so this video is really helpful.

• 
  @spudskirc445810 ай бұрын

  Glad to hear it helped :)

• 
  @CheckYourSheds10 ай бұрын

  This video is really helpful. Thanks!

• 
  @spudskirc445810 ай бұрын

  Glad it helped out.

• 
  @Zstreetfighter1810 ай бұрын

  Hallo, kann ich den gyro im Empfänger auch über den Sender einstellen oder nur am Empfänger selbst? Danke

• 
  @logiplaysgoldstone10 ай бұрын

  Awesome run that Nick. Congratulations mate