Пікірлер

• 
  @yrusonoz55742 күн бұрын

  Nice

• 
  @stefan-norge2 күн бұрын

  @@yrusonoz5574 Glad you like it. Its a great rig 👍🏻

• 
  @hieuau19963 күн бұрын

  Ống xả khí thải bên phải đâu rồi bạn?

• 
  @stefan-norge2 күн бұрын

  Good point 😉 Unfortunately It was missing. Could be lost while customs opened the parcel or they just missed it to install.

• 
  @ectorvalle40595 күн бұрын

  Did you get those chrome wipers and door handles from FMS?

• 
  @stefan-norge5 күн бұрын

  @@ectorvalle4059 No, I just painted them with chrome paint. You can find all the mods in the description.

• 
  @DawgAddict917 күн бұрын

  Which size tires are on the lc80?

• 
  @stefan-norge7 күн бұрын

  @@DawgAddict91 check out this vid… white: 58mm on 1.0“, black silver: 64mm on 1.3“, black 64mm on 1.0“: kzread.infoF9KKNT4BiBE?si=H1BYg86chzivXNUX

• 
  @stefan-norge7 күн бұрын

  @@DawgAddict91 my final choice: kzread.info/dash/bejne/eZl7mJORh5y1YNo.htmlsi=_DOozLazPg11VBIU

• 
  @speedrider31459 күн бұрын

  When you save up for 30 years and you can buy a model of your favourite car

• 
  @stefan-norge9 күн бұрын

  This Reely is great, especially if you consider the prize in Switzerland. Was about 400$, an Arrma Infraction is more than 800$ in Switzerland. With the upgrade servo and the ball bearing for the servo saver it was finally 520$. So if I had to buy again a 1/7 scale street car it would be this one.

• 
  @peternagy11029 күн бұрын

  Can i put 1.0 beadlock rims of this car? Without extenders :) Your inspired me and im now order one 👌😂

• 
  @stefan-norge9 күн бұрын

  Yes, the Injoras work well with the portals. They have 3.78mm (or so) offset. I am not quite sure if 0-offset wheels will also work. I have only offset wheels in my portfolio. Glad you like the rig.

• 
  @peternagy11029 күн бұрын

  Amazing!

• 
  @stefan-norge9 күн бұрын

  Thanks, glad you like it 👍🏻😃

• 
  @stefan-norge9 күн бұрын

  It got even better: kzread.infoAf2pujLf5n4?si=KEafSu64fy9J1Bb4

• 
  @jimbo420311 күн бұрын

  Cool mustang 😊

• 
  @stefan-norge10 күн бұрын

  Thanks, glad you like it. It drives great with the upgraded servo and more tension on the servo saver.

• 
  @CrazyQuadBrothersP312 күн бұрын

  In 2024 one of these will be a purchase

• 
  @stefan-norge12 күн бұрын

  It is well worth it 👍🏻👍🏻

• 
  @jimbo420316 күн бұрын

  Nice climb at the end !

• 
  @stefan-norge16 күн бұрын

  Yeah, it does well 👍🏻 Thanks, glad you like it.

• 
  @jimbo420316 күн бұрын

  Cool video, nice shots

• 
  @stefan-norge16 күн бұрын

  Thanks, glad you like it 👍🏻

• 
  @rcarty41916 күн бұрын

  Are people referring to like mod number 3 or is there like a standard, package with that title… I see it often. Super cool short dude!!

• 
  @stefan-norge16 күн бұрын

  Thanks, glad you like it. In my case there is no specific logic behind the numbers. I just count each mode stage up….

• 
  @stunod-RC16 күн бұрын

  One of my favorite Injoras.. the DJs are perfect compliment to the K10. Steering links are almost mandatory.. Well done, base essentials.

• 
  @stefan-norge16 күн бұрын

  Fully agree, glad you like it 😃

• 
  @rcplaytime18 күн бұрын

  beautiful dude 👌👌😎😎👍

• 
  @stefan-norge17 күн бұрын

  Glad you like it 😃

• 
  @ONFLOOD-RC19 күн бұрын

  Awesome mate!!!👍👍👍Love that truck 🔥🔥🔥😎🤟

• 
  @stefan-norge19 күн бұрын

  Yeah, it is a beast, glad you like my vid. The rig is great, needs nearly no upgrades at all.

• 
  @ONFLOOD-RC19 күн бұрын

  @@stefan-norgeyou can see it’s a BAD truck!!! Very good looking 👍👍👍

• 
  @ONFLOOD-RC21 күн бұрын

  🌪️🔥🔥🔥🔥🔥😎🤟

• 
  @stefan-norge21 күн бұрын

  Thanks, glad you like it 👍🏻😃

• 
  @Rlaarlo21 күн бұрын

  Did it get dizzy at the end?

• 
  @stefan-norge21 күн бұрын

  No 😂😂👍🏻👍🏻 I just thought I should end it in full speed…

• 
  @Rlaarlo20 күн бұрын

  @@stefan-norge 🤣🤣

• 
  @rcplaytime22 күн бұрын

  absolutely awesome 👌 💪💪😎😎

• 
  @stefan-norge21 күн бұрын

  Thanks, glad you like it 👍🏻😃

• 
  @TheLiandriCorp22 күн бұрын

  You have gone further than most while still retaining the kits original look and appeal! Out of curiosity, between Acent 18 and Katana, which one do you prefer and why (stock and with your current builds)? Nice build showcases!

• 
  @stefan-norge22 күн бұрын

  Thanks, glad you like it 😃 Really hard to choose one as a favorite. The Ascent18 needs the furitek system badly if you add weight. So add the venom starter kit to the costs for an Ascent18. But then the mods are quite similar to get an equal result. Also both need a lot of body trimming, already with stock tires. Again, same situation for both. So in my opinion it is up to the look of the body. And now my „special“ situation: due to the fact that there is no distributor for Redcat in Europe or Switzerland I had to pay the same amount of money for the Ascent18 and the Katana (both stock). So in my case I would buy the Katana if I keept it stock.

• 
  @stefan-norge22 күн бұрын

  By the way: I have added this video a view minutes ago. It is slowed down a little bit. That helps to see the movent of the body and the work of the suspension and tires. For most people boring but I like it to watch in detail. I prefer when the rigs body still roll and the shock has a functional spring and damping. Of course, one can see it just with a bit slo-mo but I like it anyways… PS. The Katana was driven by my father in law. He is a beginner and has a lot of fun driving it but the Katana can do much smoother 😉 kzread.info/dash/bejne/dI5rybGPpZW7h6Q.htmlsi=ijyhRDyXYMs2VtV4

• 
  @TheLiandriCorp21 күн бұрын

  @@stefan-norge Heh, face the same issues in here in Sweden, shipping and tolls will be a constant. Been looking to get into crawling and those two platforms look promising and here you provide build inspiration and detailed videos of them both which is a godsend, esp "real" katana crawling content that's rare on here. 1/18 seems like a good starting point, portable yet capable and it seems the aftermarket is catching up, although one needs to be a bit creative as you demonstrate ^^

• 
  @stefan-norge21 күн бұрын

  @@TheLiandriCorp Fully agree. FMS FCX 24/18 is also an impressive platform. But they have no brushless at the moment. However, the 180 motor and the esc of the FCX18 are really good. Lots of torque ad very good modulation 👍🏻 And tons of aftermarket parts. If you check my youtube channel you will find quite a bit content about FCX24/18 😉

• 
  @rcarty41924 күн бұрын

  Sweeeeeeet!!!!

• 
  @stefan-norge24 күн бұрын

  Was fun 😂

• 
  @rcarty41924 күн бұрын

  Nice

• 
  @stefan-norge24 күн бұрын

  Thanks, glad you like it. Its a beast 👍🏻

• 
  @TrokaRC27 күн бұрын

  👍

• 
  @johnlujan8706Ай бұрын

  Looks great!

• 
  @stefan-norgeАй бұрын

  Thanks, glad you like it 😃

• 
  @TheronArnold-cc1gsАй бұрын

  Looks great, good job and grat info on mods. Im slowly upgrading one currently. Looks like most of the play is out of the drivetrain. How did you accomplish that? Any other mods to get rid of the drivetrain slope? Let me know.

• 
  @stefan-norgeАй бұрын

  Glad you like it. Slope is still there, no idea yet how to reduce it…

• 
  @TheronArnold-cc1gsАй бұрын

  What mods do you need to do to the brass front for overdrive gears? I have parts coming.

• 
  @stefan-norgeАй бұрын

  @@TheronArnold-cc1gs I am not quite sure if I understand right. Just buy the overdrive gears for the front portals and you will be fine. If you change from plastic stock portals to a brass portal cover you just have to put the bearings out of the plastic ones and put it into the brass covers.

• 
  @rcplaytimeАй бұрын

  nice 👌 😎

• 
  @stefan-norgeАй бұрын

  Thanks, glad you like it 😃

• 
  @ONFLOOD-RCАй бұрын

  You did a awesome truck!!! Amazing!!!🥇👍👍👍

• 
  @stefan-norgeАй бұрын

  😃 thanks, glad you like it 👍🏻

• 
  @ONFLOOD-RCАй бұрын

  Unstoppable!!!🔥🔥🔥😎🤟

• 
  @stefan-norgeАй бұрын

  I like it a lot 😃

• 
  @0UTCAST247Ай бұрын

  Good video BTW 👍

• 
  @0UTCAST247Ай бұрын

  I was thinking about putting an optical flow sensor in my RC ERA C186 just to see if it makes it easier to fly or not.

• 
  @stefan-norgeАй бұрын

  It works better in my opinion without the sensor. Of course it keeps the position, but the Eachine is very slow…

• 
  @0UTCAST247Ай бұрын

  @@stefan-norge thanks for the reply👍the Rc Era C186 does fly well but doesn't seem slow especially in level 3 but sometimes if there's a breeze it drifts pretty badly even the air vents in my house push it around and I've found that if there is several objects around like furniture that's close by the rotor wash will push it around! I thought perhaps the sensor would help it hold but maybe not i might try it just to see. It handles the wind better on level 3 but I'm a little skiddish about doing that indoors it's quiet quick or maybe it's just me IDK. Outside it's essential too kick up the collective though .

• 
  @stefan-norgeАй бұрын

  @@0UTCAST247 the sensor helps for sure. If it is not windy, it is quite stable.

• 
  @0UTCAST247Ай бұрын

  @@stefan-norge Thanks for tip, i need to back the car out of the garage one day try flying it in there one day because if there's any kind of a breeze it drifts around quite a bit. The parts are cheap its not much work i might just throw a sensor in there to see what happens, working on them is what makes it a hobby if we didn't work on thdem they would just be toys😁

• 
  @stefan-norgeАй бұрын

  @@0UTCAST247 for sure worth a try 👍🏻

• 
  @chrizzainАй бұрын

  What wheels are you running?

• 
  @stefan-norgeАй бұрын

  These are from RCAWD or Aliexpress. 1.3“ with DJCrawler 64x24 mm. Check out the description, there you find all the mods in detail.

• 
  @ONFLOOD-RCАй бұрын

  Very nice truck mod mate!!!🥇🤜🤛😎

• 
  @stefan-norgeАй бұрын

  Thanks, glad you like it 😃😃

• 
  @stefan-norgeАй бұрын

  That was the final result: kzread.info/dash/bejne/eZl7mJORh5y1YNo.htmlsi=I3vSMbScW0g7-UzT

• 
  @johnlujan8706Ай бұрын

  A must have rc for me..for sure.

• 
  @stefan-norgeАй бұрын

  Glad you like it 👍🏻

• 
  @ONFLOOD-RCАй бұрын

  Very nice truck and video!!!🥇👍👍👍

• 
  @stefan-norgeАй бұрын

  Glad you like it, thanks 😃

• 
  @chrism5768Ай бұрын

  I just put these tires on my caymen pro v2. Game changer. I also have a set of the 1.3 wheel size by 70mm cling on tires. These 68 by 1.0 are actually larger mounted than the cling ons un mounted. Waiting on my brass 1.3 wheels still to mount.

• 
  @AngerhausАй бұрын

  Ohh yeah I just saw this on Taobao the other day and thought about getting it. It looks like it’s definitely worth the measly sum!

• 
  @stefan-norgeАй бұрын

  I bet you won‘t regret it 👍🏻

• 
  @redvikinghobbies2 ай бұрын

  Nice man! Appreciate when people do incline tests correctly!

• 
  @stefan-norgeАй бұрын

  Glad you like it. I do it all the time in the same way to be able to compare the different rigs. But at the end the result in the rocks counts. But as an indication it is quite ok.

• 
  @redvikinghobbiesАй бұрын

  @stefanhofstetter54 I like it because often times folks will use something with a grip that reacts differently to different tire compounds, usually of course in 1/10th that may not be good indicators. Carpet for instance. I come from a flooring background and some carpets are treated, others built into the fiber, with stain resistance. This can make tires stick or slick. So I don't like that. And then there's guys that build a permanent ramp and increase the incline over inches. We'll if the back tires are on 50 degrees and the fronts hit 54 than you have to measure the degree of the chassis, not say it climbed 54 degrees. Joe from Exocaged measures his climbs in inches just for that reason. He says how far the car got, not what the degrees are. Makes more sense. I asked about a standard and the consensus in every crawling group was "as long as you measure every rig on the same flat angle for all tires every time" you can get a decent incline test. I use furniture grade plywood. I wipe it down and let it dry and change the angle for every climb. I wanted to do concrete board because someone suggested that being more similar to rock however concrete evaporates moisture. (As does wood but at a different rate.) So a piece of concrete board would get dustier over time and cause loss of traction. But anyone can pick up a nice piece of 3/4" furniture grade plywood and it's roughly the same everytime you buy it because it's made to take a stain. That's my weapon of choice.

• 
  @zeeman33932 ай бұрын

  We're do u get

• 
  @stefan-norge2 ай бұрын

  You mean the rig? It is a FMS FCX18, you can get it directly from FMS or Aliexpress, from your local dealer I would suppose…

• 
  @chrishall5132 ай бұрын

  Hey there! Thanks for the katana content! I'm curious what axles you used to upgrade with?

• 
  @stefan-norge2 ай бұрын

  Glad you like it. Front axle is stock but with the extended axle shafts from the EVO PRO, rear axle is stock FCX24/18 with ball bearings and extended axles shafts from Treal.

• 
  @Jeff1972GoPro2 ай бұрын

  It sits too high with the portals for climbing. Go smaller diameter tires (57mm) or pull the shock springs and band them down for better climbing. As received it a great rig for bouldering. Real world 56-57 deg is not that bad. Solving torque twist is huge.

• 
  @stefan-norge2 ай бұрын

  Thanks, in meantime I reach 60° and still have fully functional shocks with 50% sag. I know I could reach more with bands etc. but I like how it moves with fully functional shocks. Looks more like a real car and that is what I like. kzread.infoIw8P9hF17pk?si=pLtJUwQbnA_gSktQ

• 
  @helicopterovirtual-msfs62542 ай бұрын

  Fantástico.

• 
  @stefan-norge2 ай бұрын

  Thanks 😃

• 
  @tinyrcguy2 ай бұрын

  Where did you get yours from

• 
  @stefan-norge2 ай бұрын

  Asiatees. They were the inly ones who were able to deliver it that time…. But I have seen it on Aliexpress quite cheap right now….

• 
  @SkintBanjo2 ай бұрын

  3rd look the best, but the 2nd ones will perform much better cause thoes are some heavy wheels💀

• 
  @stefan-norge2 ай бұрын

  Absolutely, they performed best. But still I decided on the 3. ones due to look.

• 
  @cak51712 ай бұрын

  I actually have the frost two wheels myself. But i think the white Injora ones work best with this truck

• 
  @MrLindberg962 ай бұрын

  Awesome😍 Did you have to modify the mounts for the body?

• 
  @stefan-norge2 ай бұрын

  Glad you like it. No, the FCX24 bodys (Smasher, K5 and Power Wagon) are interchangable. I just bought an other Smasher body, painted it and that‘s it.

• 
  @stefan-norge2 ай бұрын

  kzread.infohjSfbhQyb1M?si=dbOW1nyNcRXDIINP

• 
  @JustSomeEdits132 ай бұрын

  Cool car 😎

• 
  @Polskmofo2 ай бұрын

  Were you able to fix the driveline slip in that thing?

• 
  @stefan-norge2 ай бұрын

  No, but I don‘t care anymore about that. On the rocks it performs well (with all the mods 😉)

• 
  @stefan-norge2 ай бұрын

  In mean time it has developed further: kzread.info/dash/bejne/mq2JqrGIhNafn9I.htmlsi=-UXCnJ4IzJek7ga4

• 
  @Polskmofo2 ай бұрын

  @@stefan-norge looks good

• 
  @Thecarterrs2 ай бұрын

  Are those 1.3 inch tires?

• 
  @stefan-norge2 ай бұрын

  Yes, DjCrawler 1.3“

• 
  @torstennicolai95122 ай бұрын

  What kind/thickness of oil you use?

• 
  @stefan-norge2 ай бұрын

  It depends on the rigs weight and the specific shocks. In this case it was a 30wt. Always silicone oil.

• 
  @stunod-RC2 ай бұрын

  Love the title! TBD. 😂

• 
  @stefan-norge2 ай бұрын

  You were too fast. Had still to copy and paste the title 😉

• 
  @stefan-norge2 ай бұрын

  Fully agree. Gyro should be right out of the factory. Needs other tires for 3s and it also need body trimming. But if you have fixed that it is a absolut blast. And with 30% gyro it is quite stable also in full speed. I like it a lot, drives really well now.